dpnicoli · the dp nicoli sales & rental equipment overview catalog is intended as a general...
TRANSCRIPT
dpnicoli.comOregon/SW Washington 1-800-695-5006
Seattle/Tacoma, WA 1-866-695-5008
San Jose/San Francisco, CA 1-800-695-5007
North East Bay, CA 1-800-695-5007
Steel Plates • Rumble Plates • Arch Spreader • Trench Shields • Manhole Shields • Bedding Boxes
• Vertical Shoring • Hi-Clearance Shores • End Shores • Build-A-Box • Aluminum Shoring • Slide Rail
• Sheet Piling • Pipe Piling • H-Beam/Plate • Minus One Shields • Barriers
Sales & Rentals
Providing the highest quality materials and equipment,
and the most knowledgeable, responsive employees
since 1982
Sales & Rentals
Providing the highest quality materials and equipment, t ials a
and the most knowledgeable, responsive employees
Product Catalog
2 Equipment that saves lives!
Oregon/SW Washington 1-800-695-5006 • Seattle/Tacoma, WA 1-866-695-5008 • San Jose/San Francisco, CA 1-800-695-5007
Superior Piling and Shoring Solutions.Welcome to DP Nicoli
DP Nicoli stocks 1" steel plates
in a wide variety of dimensions.
All DP Nicoli plates have
handling holes, lifting nuts and
DP Nicoli serialized/numbers on
both sides of each plate.
Steel Rumble Plates are designed to
remove debris and dirt from the underbody
of the vehicle leaving a jobsite. By driving
over the angle iron of the Rumble plate the
tread of the tire expands releasing lodged
dirt and mud.
DP Nicoli Arch Spreaders are pin-in place arches that are
interchangeable with 8” schedule 80 spreaders and fit
standard sidewall collars. The arches provide 96” clearance
on 8’ tall boxes, and 120” on 10’ boxes.
Optional Accessories:
DP Nicoli Quick Pik handling system.
Non-skid available upon request.
The DP Nicoli Sales & Rental Equipment Overview catalog is
intended as a general listing of our available product line. For
complete information regarding full availability, specifications and
complete detailed information, please contact a shoring specialist
nearest to your location at a phone number listed below.
Steel Plates
Arch Spreader
AvailableSizes
AvailabilityLocation
Weight(Lbs.)
4' x 6'4' x 8'4' x 10'5' x 8'6' x 8'6' x 10'6' x 12'8' x 10'8' x 12'8' x 15'8' x 20'
9841306163416341968245029323268392149006536
CACACA
OR,CA,WACA
OR,CA,WAOR & CA
OR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WA
8' x 15' x 1.5" 7350 OR,CA,WA
8' x 10' x 1.5" 4902 OR,CA,WA
Rumble Plates AvailableSizes
AvailabilityLocation
Weight(Lbs.)
8' x 10' 3575 CA
Steel Plates
Rumble Plates
Arch Spreader
(Spreader Length) 18”
12”
8” Sch. 80 Spreaders Adjusts to fit shields with center collar spacings of 19”, 23” & 30”
6’, 8’ or 10’
32-3/4”
6’, 8’ or 10’
2,000 Lb. Per Set
Oregon/SW Washington 1-800-695-5006 • Seattle/Tacoma, WA 1-866-695-5008 • San Jose/San Francisco, CA 1-800-695-5007
Equipment that saves lives! 3
DP Nicoli stocks a full line of shields including: Steel Trench
Shields, Minus-One Trench Shields, Aluminum Trench Shields,
Steel Manhole Shields, Round Manhole Shields & Hydraulic
Panel Manhole Shields. See www.dpnicoli.com for full details.
Shoring/Shields
DP Nicoli stocks a wide variety of steel trench shields, including standard or heavy duty 4" & 6"
double walls. All DP Nicoli steel trench shields come fully equipped with stacking pockets,
lifting eyes, pulling lugs (on 6’, 8’ & 10’), and spreader pins and have round collars that use
industry standard 8" schedule 80 pipe for spreaders.
Optional Accessories:
Arch spreaders for increased clearance, drag cables, fourway lifting cables or chains, stacking
pins, legs for additional clearance and various fixed spreader sizes.
Trench Shields
Trench Shield & Shoring SpecificationsThese shields use 8" schedule 80 pipe for spreaders with a rated maximum length of 20'.
HeightFt.
LengthFt.
WeightLbs.
Max. depth in feet / soil type A B C 60
Pipe ClearanceInches
Shield CapacityPSF
AvailabilityLocation6" Steel Shields
Trench Shield & Shoring SpecificationsThese shields use 8" schedule 80 pipe for spreaders with a rated maximum length of 20'.
HeightFt.
LengthFt.
WeightLbs.
Max. depth in feet / soil type A B C 60
Pipe ClearanceInches
Shield CapacityPSF
AvailabilityLocation4" Steel Shields
6688810101010
242820242812162024
9700110861116012890158818460
103801362015890
WallInches
666666666
414166606485848585
754652142311409132400150012391500
332956464196604960
201731252453332733
161423191940252025
OR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WA
444446668888881010
10121620241216208
10121620241216
WallInches
4444444444444444
30083380413053646324479059706837276046385800751490801040184609040
162222222241404160606066666085
84.5
2528276012007808402460134013802760264020401423138056212041500
991105555349857556165825658265360
58563131195532304638453131163233
44462323144124233530342323132525
OR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WA
4 Equipment that saves lives!
Oregon/SW Washington 1-800-695-5006 • Seattle/Tacoma, WA 1-866-695-5008 • San Jose/San Francisco, CA 1-800-695-5007
DP Nicoli offers the expertise needed to help determine the
best shoring choices for your projects. Product flexibility,
on-time delivery and the assistance needed to plan and carry
through your plans. See www.dpnicoli.com for full details.
Manhole Shields
Manhole shields provide protection for manhole installations. DP Nicoli offers square, round and octagon shields that
are safe, convenient and easy to install. Some shields also have cutouts along the bottom edge to allow for use with
crossing utilities. Legs can also be used for additional clearance.
Optional Accessories: 2' Legs, lifting chains, different length spreaders.
Trench Shield & Shoring Specifications
These shields use 5" schedule 80 pipe for spreaders with a rated maximum length of 20'.
Hydraulic manhole shield walls are made of shoring panels with hydraulic cylinders on two opposite sides that allow the shield to telescope out and apply pressure against the trench wall.
484884
88
10101212
297256393335631272004680
-45-
4552-
142314231560142313201200
565660505348
313134292927
232426232220
OR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR & WAOR & WA
HeightFt.
LengthFt.
WidthSq. Size Ft.
Max. depth in feet / soil type A B C 60
Pipe ClearanceInches
Shield CapacityPSF
AvailabilityLocationManhole Shields Weight
Lbs.
88
10101212
488
---
92016092319
00
0 - 40
192019201649
323225
323225
323225
OROROR
8.58.58.5
468
888
120015002000
---
925925925
303020
303020
151515
CACACA
888
Some will have cut-outs for crossing utilities
Square
Some will have cut-outs for crossing utilities
Round
Uses 52"-88" hydraulicspreaders
Hydraulic
468
888
100718002337
---
150015001500
404040
334040
252525
CACACA
888
Tap Box
Wrap Around Corner End Plates 4-Sided 3-Sided
Manhole Can (Round) Hydraulic Box Tap Box
Oregon/SW Washington 1-800-695-5006 • Seattle/Tacoma, WA 1-866-695-5008 • San Jose/San Francisco, CA 1-800-695-5007
Equipment that saves lives! 5
At DP Nicoli your safety is our first concern. All of our equip-
ment meets or exceeds today’s safety requirements. We are
always available to answer any questions you have concern-
ing safe use of our equipment on your job site.
Octagon | Bedding Boxes
Octagon boxes offer four-sided protection with a tremendous strength to weight ratio. Octagon boxes
are rated for deep excavations but are lightweight enough to be handled with light-duty equipment.
DP Nicoli Bedding Boxes (Stone Mizer) are available in four
sizes. The clearance between the lift bar and bedding box is 24”.
Bedding boxes reduce the time production crews wait for pipe
bedding transfers, as well as reducing the amount of cost for
wasted or spilled bedding.
Trench Shield & Shoring Specifications
Octagon shields with 12’ length/width supplied as two halves and pin together.
HeightFt.
LengthFt.
WidthSq. Size Ft.
Max. depth in feet / soil type A B C 60
Pipe ClearanceInches
Shield CapacityPSF
AvailabilityLocationOctagon Shields Weight
Lbs.
484848
88
10101212
200036002880568033806420
-24-
36-
40
180018001200120012001200
727248484848
404027272727
303020202020
OR & WAOR & WAOR & WAOR & WAOR & WAOR & WA
88
10101212
8’ tall boxes available with cutouts, 4’ tall boxes have no cutouts
Octagon
Bedding Box
Octagon
Bedding Boxes (Stone Mizer) Sizes(Cubic Yards)
57.59
12
Weight Empty(Pounds)
4210481054907040
Dimensions (inches)Height x Width x Length
36 x 60 x 14048 x 60 x 16248 x 60 x 18648 x 70 x 210
Uses: Manhole installation, small bore pit shoring, and similar tasks
requiring 4-sided protection in a relatively small area.
Optional Accessories: 2' Legs, lifting chain, lifting cable.
6 Equipment that saves lives!
Oregon/SW Washington 1-800-695-5006 • Seattle/Tacoma, WA 1-866-695-5008 • San Jose/San Francisco, CA 1-800-695-5007
DP Nicoli keeps your shoring jobs simple. Hydraulic vertical
shoring allows your work space to be safe and protected from
hazards, and yet flexible enough to fit most work sites.
See www.dpnicoli.com for full details.
Hydraulic Shoring
Optional Accessories: Spreader
bar, fin form, hydraulic pump,
release tool, extensions to
increase cylinder length up to 15'.
Hydraulic aluminum shoring is quick, safe and simple to use - one of the most popular
resources for supporting the sidewalls of a trench. They can also be fully installed and
removed from the top of the trench.
Various cylinder sizes are available to accommodate trench widths from 17" to 180".
A hydraulic pump and release tool are available from DP Nicoli and are required for use.
Hydraulic Vertical Shoring
Finform
Rail Sizes
Fluid
Pump Spreader Bar
Release Bar
AvailableSizes
AvailabilityLocation
OR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WA
4' x 2'4' x 4'4' x 6'4' x 8'
4' x 10'4' x 12'4' x 16'
Finform
AvailableRail Sizes
AvailabilityLocation
OR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WA
1-1/2'2'
3-1/2'5'7'10'12'16'
Length of stroke2" H.D. Vertical Shoring DPNicoliColor Code
Cylinder SizesMin. to Max.
AvailabilityLocation
Extensions Available #1 Ext. #2 Ext. #3 Ext.
10"14"18"21"36"
OrangeRed
GreenBlueBlack
-33 - 4743 - 6152 - 73
76 - 112
-44 - 5358 - 7670 - 91
94 - 130
- 55 - 6973 - 9188 - 109
108 - 144
OR & CAOR & CAOR & CAOR & CAOR & CA
17" - 27"22" - 36"28" - 46"34" - 55"52" - 88"
10"14"18"21"36"
OrangeRed
GreenBlueBlack
41 - 5146 - 6052 - 7058 - 79
76 - 112
59 - 6964 - 7870 - 8876 - 97
94 - 130
73 - 83 78 - 9284 - 10290 - 111
108 - 144
WAWAWAWAWA
17" - 27"22" - 36"28" - 46"34" - 55"52" - 88"
Table is for estimating purposes only. Approved engineering will be provided at time of shipment.
Max. HorizontalShoring SpacingHydraulic Vertical Shoring Max. Vertical
Cylinder SpacingDepth ot Trench
(feet)Max. Widthof Trench
SheetingRequirements
AvailabilityLocation
8'8'
4'4'
12'12'
(3)(3)
OR,CA,WAOR,CA,WA
Up to 15'15' to 25'
Type "A" Soil
8'7'
4'4'
12'12'
(3)(3)
OR,CA,WAOR,CA,WA
Up to 15'15' to 25'
Type "B" Soil
5'4'
4'4'
12'12'
(3)(3)
OR,CA,WAOR,CA,WA
Up to 15'15' to 25'
Type "C-60" Soil (6)
16’ 12’ 10’ 7’ 5’ 3-1/2’ 2’
Oregon/SW Washington 1-800-695-5006 • Seattle/Tacoma, WA 1-866-695-5008 • San Jose/San Francisco, CA 1-800-695-5007
Equipment that saves lives! 7
DP Nicoli offers the expertise needed to help determine the
best shoring choices for your projects. Product flexibility,
on-time delivery and the assistance needed to plan and carry
through your plans. See www.dpnicoli.com for more details.
Hi-Clearance Shores
Hi-Clearance Shores come in vertical heavy duty
whaler lengths of 10’ and 12’, and can be loaded
with cylinders ranging from 17” to 144”.
Depending on the soil classification the shore
allows for vertical clearance of up to 84”. High
clearance shores have the option of being
supplied with or without plywood. These shores
utilize hydraulic cylinders and can be used at the
bottom of an excavation with standard or
heavy-duty shores stacked on top.
Now you can turn your trench into a
3 or 4 sided pit by providing a
lightweight, safe and effective way
to shore the end of a trench without
the worry of sloping or benching.
End shores come in panel lengths
of 4’, 6’, 8’ and 10’. The panel can be
loaded with quick braces ranging
from 22” to 133”. Available with 4’,
6’, 8’ and 10’ aluminum lightweight
12” shoring panels.
Hi-Clearance Shores
End Shore
End Shores Weight without Panels (lbs.)6’ Tall 8’ Tall 10’ Tall
WidthInches
AvailabilityLocation
99134169207307363375466
110152194239357413425538
88116144175257313325450
CACACACACACACACA
17 - 2722 - 3628 - 4634 - 5552 - 8876 - 11294 - 130
108 - 144
Potential # of12” Panels
1 - 21 - 3
33 - 44 - 77 - 9
8 - 1010 - 12
Panel Weight (lbs.)
4’ Tall - 126‘ Tall - 198’ Tall - 2510’ Tall - 31
Number ofCylindersHi-Clearance Shores Weight (lbs.)
8’ Rail 10' Rail 12' RailWidthInches
AvailabilityLocation
44444444
77777777
ClearancePotential - Feet
327343359367399438446454
CACACACACACACACA
17 - 2722 - 3628 - 4634 - 5552 - 88
76 - 11296 - 130108 - 144
292300316324366405413421
254274306314356395402411
8 Equipment that saves lives!
Oregon/SW Washington 1-800-695-5006 • Seattle/Tacoma, WA 1-866-695-5008 • San Jose/San Francisco, CA 1-800-695-5007
DP Nicoli offers a complete inventory of build-a-box systems.
This flexible and versatile solution to your trench shielding
protection may be just the answer. Lightweight, easy to
transport and quick to set up.
Build-A-Box
Uses: Build-A-Box can be used for lineal trench lines, pit applications,
T-connections and 90 degree corner configurations.
Optional Accessories: Adjustable legs, wheel kits, splice kits, 40” cut-out
panels and adjustable spreaders.
Build-A-Box components offer true flexibility and versatility.
This aluminum modular trench shield system is designed to be used in a
wide variety of 2, 3, or 4-sided configurations. The light weight shoring
panels can be configured to meet application specific shoring scenarios.
Build-A-Box shoring panels are foam filled with a tongue and groove
design for easy assembly.
Build-A-Box L-Shape
Trench Shield & Shoring Specifications
Aluminum modular trench shield with Full Length Corner Posts
HeightFt.
LengthFt.
Max. depth in feet / soil type A B C 60
Shield CapacityPSF
AvailabilityLocationBuild-A-Box Panel Sizes Weight
Lbs.
2222222
234681012
28405276100124148
24002400240024001440960780
96969696583831
53535353322117
40404040241613
OR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WA
Trench Shield & Shoring Specifications
WidthFt.
LengthFt.
Max. depth in feet / soil type A B C 60
HeightFt.
AvailabilityLocationBuild-A-Box Common Configurations
4466668888810
68688108810121212
688688688688
534153414129414129222222
292329232316232316121212
221722171712171712999
OR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WAOR,CA,WA
California(inches)
Oregon(inches)
24 - 3636 - 6060 - 8484 - 10852 - 8884 - 120
22 - 3628 - 4634 - 5542 - 6952 - 88
84 - 120
Washington(inches)
24 - 3636 - 6048 - 72
72 - 10852 - 88
84 - 120
Adjustable Strut Dim.
WidthFt.
WeightLbs.
630815
46
AvailabilityLocation
OR,CA,WAOR,CA,WA
Arch Spreaders
Completed Application Shown with Cutaway Installed in Roadway
Setup Example Adjustable Spreaders Arch Spreader
Oregon/SW Washington 1-800-695-5006 • Seattle/Tacoma, WA 1-866-695-5008 • San Jose/San Francisco, CA 1-800-695-5007
Equipment that saves lives! 9
DP Nicoli works hard to make available the “tools” you need
for the successful completion of your projects. Up-to-date
equipment, the most complete selection and staff that under-
stands your equipment needs and helps make your job easier.
Aluminum Shoring
XLAP Aluminum trench shields are designed specifically for municipalities, utilities and
contractors who use rubber tire backhoe/loaders and small excavators for trenching.
Optional Accessories: End panels for 3 and 4 sided shields, adjustable spreaders and adjustable legs.
XLAP Aluminum shields are compatible with Build-A-Box!
Aluminum trench shields offer a lighter and more adaptable
alternative for medium and light-duty applications. They can
be handled with smaller equipment.
Optional Accessories: Stacking pins, legs for additional clearance, end
kits for 3 and 4-sided enclosure, lifting chain, hydraulic or static
adjustable spreaders, high arch spreaders, and cut-out doors.
XLAP Aluminum Shield
Alum-A-Shield
XLAP with 5” Spreaders XLAP with Build-A-Box Panels XLAP with Wheel Kit
Trench Shield & Shoring Specifications
HeightFeet
LengthFeet
WeightLbs.
Max. depth in feet / soil typeA B C
Pipe ClearanceInches
Shield CapacityPSF
AvailabilityLocationXLAP Aluminum Shields
3" Aluminum Double Wall Adjustable Width
Trench Shield & Shoring Specifications
With 34"-55" Hydraulic Quickbraces
With 34"-55" Hydraulic Quickbraces
HeightFt.
LengthFt.
WeightLbs.
Max. depth in feet / soil typeA B C
Pipe ClearanceInches
Shield CapacityPSF
AvailabilityLocationAlum-A-Shield™
666
68
12
83111821650
242424
12541272711
474825
262714
202010
CA & WACA & WA
CA
8888
8101214
1311154517802240
24242424
12721086711792
50392428
28221316
20161012
CA & WACA & WACA & WA
CA
69085011201340156017703400
30303030303060
15601200120096078060
720
62484838312429
35272721171316
OR & WAOR & WA
OR,CA,WAOR,CA,WAOR,CA,WAOR & WAOR & WA
6688888
26202016131012
688
10121416
California(inches)
Oregon(inches)
24 - 3636 - 6060 - 84
84 - 108- - -
22 - 3628 - 4634 - 5542 - 6952 - 88
Washington(inches)
24 - 3636 - 6048 - 7272 - 108
- - -
Adjustable Strut Dim. Note: 8’ x 16’ XLAP Aluminum Shield has steel wrap and receives 8” - Schedule 80 pipe.
Spreader Sizes (inches)
22 - 3628 - 4634 - 5552 - 8876 - 11294 - 130
108 - 144
AdjustableQuick Braces
10 Equipment that saves lives!
Oregon/SW Washington 1-800-695-5006 • Seattle/Tacoma, WA 1-866-695-5008 • San Jose/San Francisco, CA 1-800-695-5007
DP Nicoli offers the expertise needed to help determine the
best shoring choices for your projects. Product flexibility,
on-time delivery and the assistance needed to plan and carry
through your plans. See www.dpnicoli.com for full details.
Hi-Clearence Hydra Shield
Specifications
HeightFt.
LengthFt.
Shield CapacityPSF
Max. depth in feet / soil type A B C 60 C 80
AvailabilityLocationHi-Clearence Hydra Shield Weight
Lbs.
888
81012
12801240830
252218
181412
141210
1198
18001600830
OR,CA,WAOR,CA,WAOR,CA,WA
Allowable trench width: 12 feet
Verticle pipe clearence: 36 inches
Maximum spreader spacing: 45 inches
Top spreader location from top: 15 inches
Hi-Clearance Hydra Shieds
High Clearance Aluminum Shields offer a light weight solution ideal for large diameter pipe and
bell holes. Hydraulic or static quick braces can be adjusted to provide up to 5’ 3” of pipe
clearance and when conditions allow can provide 7’ 3” of pipe clearance by using legs or riding
the shield 2’ from bottom of the trench. Optional aluminum sheeting at open ends can also be
used creating a three or four sided protective system. Optimal depths for use in high clearance
mode range 8 –12’. Available in 8’x 8’, 8’x 10’ and 8’x12’.
Hi-Clearence Hydra Shield
Oregon/SW Washington 1-800-695-5006 • Seattle/Tacoma, WA 1-866-695-5008 • San Jose/San Francisco, CA 1-800-695-5007
Equipment that saves lives! 11
DP Nicoli stocks a full line of shields including: Steel Trench
Shields, Minus-One Trench Shields, Aluminum Trench Shields,
Steel Manhole Shields, Round Manhole Shields & Hydraulic
Panel Manhole Shields. See www.dpnicoli.com for full details.
Minus One Shields
Minus One Shields
Trench Shield & Shoring Specifications
HeightFt.
LengthFt.
Max. depth in feet / soil type A B C 60
Pipe ClearanceInches
Shield CapacityPSF
AvailabilityLocationMinus One Shields Weight
Lbs.
68
1616
64406800
5151
710749
2830
1617
1212
OR & WAOR & WA
The Minus-One Trench Shield allows narrower trenches to be dug without reducing the working area of
the pipe-layer. Narrower trenches save substantial dollars by reducing backfill quantities, excavation, haul
away, dump fees and A/C restoration. Designed (to comply with OSHA standard) with a wall thickness of
1/2 inch, the standard trench box has a 4 inch or 6 inch wall. If you are currently using a trench box with 4
inch walls, your trench is 7 inches wider than needed with the Minus-One Trench Shield.
At DP Nicoli your safety is our first concernPlease turn to page 17 to learn more about our Competent
Persons Training and contact a DP Nicoli shoring specialist for more information about our training classes.
We also offer handy information on “How to Size a Trench
Shield” and a “Pre-Excavation Checklist” on pages 18 an 19. Make as many copies as you need or print from our down-loadable catalog at dpnicoli.com.
see pages 16, 17 &18 for more info
12 Equipment that saves lives!
Oregon/SW Washington 1-800-695-5006 • Seattle/Tacoma, WA 1-866-695-5008 • San Jose/San Francisco, CA 1-800-695-5007
These universal post and panel trench shield systems provide
shoring solutions for a multitude of situations. Our complete
line of slide rail systems and components will help make your
job easier, and safer to complete.
Slide Rail
Slide Rail Systems have been designed
and engineered to fill a gap in the shoring
industry where current equipment may
not be the safest or most efficient means
of providing protection and shoring for an
excavation. Slide Rail systems can be
assembled into several different configu-
rations using the same basic components.
DP Nicoli offers a staff of experienced,
on-site advisors to help with the installa-
tion process.
Linear Multiple Bay
Standard 8” schedule 80
spreader pipe is used in lineal
applications. Spreaders adjust
vertically. Use of the Efficiency
waler system in conjunction
with linear runs allows a
contractor greater flexibility in
the working area. An alterna-
tive to beam and plate or
trench shields.
Through the use of different lengths of spreader pipe, linear slide rail systems
can accommodate laying pipe of all sizes. As seen above, large diameter and
long length pipe can be installed efficiently.
Slide Rail Linear Applications
Slide Rail Shoring Specifications
HeightFt.
LengthFt.
Maximum Depth (Ft.)B C-60/Cohesive C-80/Non-Cohesive
Shield CapacityPSF
AvailabilityLocationSlide Rail Panels Weight
Lbs.
44444466668888
HD888
HD88
HD8
81214162024161820228121416161820202224
180023552726307137905650394049605610760029003848423750256800612069407700906011421
30003000300024601620132015001500150015003000222026401800210018001560180015001800
6666665536293333333366615840464035403340
5050504127223030303050464430353626303030
3737373021162525252537343323263019232523
OR, CA, WAOR, CA, WAOR, CA, WAOR, CA, WAOR, CA, WAOR, CA, WAOR, CA, WAOR, CA, WAOR, CA, WAOR, CA, WAOR, CA, WAOR, CA, WAOR, CA, WAOR, CA, WAOR, CA, WAOR, CA, WAOR, CA, WAOR, CA, WAOR, CA, WAOR, CA, WA
Linear and Corner Posts Available Lengths: 14' - 32'
Oregon/SW Washington 1-800-695-5006 • Seattle/Tacoma, WA 1-866-695-5008 • San Jose/San Francisco, CA 1-800-695-5007
Equipment that saves lives! 13
DP Nicoli offers shoring solutions for a multitude of situations.
Our complete line of slide rail systems will help make your job
easier and safer. See www.dpnicoli.com for full details. Slide Rail
Slide Rail Shore Track. The industry’s only
pre-fabricated, pre-engineered cross-trench
utility shielding system, DP Nicoli Slide Rail
and Shore-Track combination system allows
for shielding around existing utilities while
providing excellent protection for pipe
installation crews.
Slide Rail ClearSpan System™
ClearSpan provides a large unobstructed
working area. ClearSpan applications
include tank sets and removals, pump
stations, building foundations and
bridgework. Using Efficiency waler system,
ClearSpan pits can be easily installed by
contractors. An alternative to sheet pile,
beam and plate, and other materials.
Available in 12’, 16‘ and 20’ lengths to accomodate
existing utilities of all shapes and sizes.
Slide Rail Shore Track
Slide Rail ClearSpan™ System
Turn page for more Slide Rail options
Slide Rail Shore Track
Slide Rail ClearSpan™ System
14 Equipment that saves lives!
Oregon/SW Washington 1-800-695-5006 • Seattle/Tacoma, WA 1-866-695-5008 • San Jose/San Francisco, CA 1-800-695-5007
DP Nicoli slide rail specialists provide full diagramed plans for
your slide rail projects. Always turn to DP Nicoli for the top
notch service and equipment you need for your next project! Slide Rail
DP Nicoli offers comprehensive instruction on
Slide Rail specifics and application. Learn how
and when to utilize Linear, ClearSpan™ or
Bore Pit components on your projects.
Contact DP Nicoli slide rail specialist for more information.
Slide Rail 3-4 Sided Pit
Slide Rail Training
Slide Rail 3-4 Sided Pit
Slide Rail Training
Slide Rail 3-4 Sided Pit
The need to have an open pit
doesn’t mean large equipment.
Slide rail systems are composed
of individual pieces that can be
assembled together to form a 3-4
sided pit. Provides increased wall
to wall working space with
minimal vibration to adjacent
structures. Ideal for manholes, wet
wells, pump stations, jacking pits
and small structures.
Only from DP Nicoli will you have your Slide Rail project plans diagramed for your job site. Included as a part of our rental service, our slide rail specialist will have a full custom-drawn diagram plan of your project completed. Our specialist will then review these plans with you and your crew. Our diagrams have become an indispensible part of our commitment to providing you with the best service possible.
Custom Diagrams of Your Project!
Oregon/SW Washington 1-800-695-5006 • Seattle/Tacoma, WA 1-866-695-5008 • San Jose/San Francisco, CA 1-800-695-5007
Equipment that saves lives! 15
DP Nicoli provides the necessary solutions for piling and
plating appilcations. Large or small projects alike will be
safer from the beginning to the completion of your project.
See www.dpnicoli.com for full details
Sheet Piling
DP Nicoli offers a wide variety of steel piling for rent or purchase, along with a full range of piling accessories. All DP Nicoli piling is
thoroughly inspected prior to delivery to ensure that it arrives straight, clean and ready for immediate use. Common dimensions are stocked
in sufficient quantity to meet most needs. Mill direct shipments may be required for large projects or unusual requirements.
Z-Sheet
With its high bending strength and Hoesch interlocks, Z sheet piling is ideal for
dewatering and many other heavy-duty applications. DP Nicoli offers hot-rolled,
interlocking steel Z sheet piling in varying grades and thickness. The piles are
supplied in pairs, with a width of 3.77’ per pair.
Arch Web Sheet
Arch web sheet pile lacks the bending strength of Z-sheet pile, but the lighter
weight and shallower profile offer important advantages. Arch web sheets offer a
neutral axis through the interlock. With a depth of only 6-inches, they can save
time and money by enabling tighter excavations.
Flat Sheet
Flat sheets are lighter, shallower, and can be driven in circular patterns. DP Nicoli
offers hot-rolled, interlocking flat sheets in varying grades and thickness.
Z Sheet
Arch Web Sheet
Flat Sheet
Common rental sizesHoeschHoeschLarssen
H1705KH2555K
L600
45.2359.8837.90
Additional sections are also available for purchase.
OR & CAOR & CAOR & CA
Brand Weight Single Pilelbs/Lineal feet
23.9631.7419.25
Weight of Walllbs/Lineal feet
31.6247.249.49
Section Modules of Wallper Lineal Ft. inches3
15 - 6015 - 6015 - 30
LengthFeet
Product Number AvailabilityLocationSheet Pile
16 Equipment that saves lives!
Oregon/SW Washington 1-800-695-5006 • Seattle/Tacoma, WA 1-866-695-5008 • San Jose/San Francisco, CA 1-800-695-5007
At DP Nicoli your safety is our first concern. All of our equip-
ment meets or exceeds today’s safety requirements. We are
always available to answer any questions you have concern-
ing safe use of our equipment on your job site.
Pipe Pile | H-Beam/Plate
Pipe Pile has a large surface area and concentric section modulus of steel pipe that makes it a
popular choice for many foundation applications. The pipe can be driven with the end open or
closed, and can be left hollow or filled with concrete. Depending on job requirements, steel pipe
can be rolled to length in several different sizes and drops can be cut off and welded together to
eliminate waste.
Optional Accessories: Inside or outside fit cutting shoes, conical points, pipe splicers, coating & end plates.
H-pile and wide flange offer convenient, flexible, low-cost piling
alternatives. They are used primarily for foundation piling, but are
well suited for many other applications. The large surface area is
particularly advantageous for friction piling. DP Nicoli stocks a wide
variety of domestically produced, bare, hot-rolled steel H-pile and
wide flange. Any length, section or quantity can be provided, from a
single piece to multiple carloads. Special orders can be accommo-
dated quickly and delivered straight from the mill to the job site.
Optional Accessories: Tips with teeth, splicers, coating, end plates.
Pipe Piling
H-Beam/Plate
OR & CA0.25" - 3"
WallThickness
10" - 156"
OutsideDiameter
AvailabilityLocationPipe Pile
Range of sizes
Common rental sizesHP 10 x 42HP 12 x 53HP 12 x 74HP 14 x 73HP 14 x 89
HP 14 x 117
40 & 6040 & 6040 & 6040 & 6040 & 6040 & 60
OR & CAOR & CAOR & CAOR & CAOR & CAOR & CA
Size Lengthper Ft.
4253747389
117
Weightper Ft.
AvailabilityLocationH-Beam/Plate
H-Pile
DP Nicoli’s Used Materials Program - Buying and Selling used materials
Our experienced Sales Representatives can help you efficiently liquidate your used inventory. With our resources in the industry, we’re able to find buyers quickly, and turn your unneeded materials into cash!
We can also assist with fulfilling your materials purchasing requirements. Simply supply our materials specialist with your list of typically needed materials, and we’ll keep you posted on inventory levels of new or used stock to quickly meet your needs as affordably as possible.
Either way, DP Nicoli’s staff of Sales Representatives will keep you informed so you’re always ready to make the best material choices.
For more details, call 1-800-695-5006 and ask how you can get on our preferred inventory management list today!
Oregon/SW Washington 1-800-695-5006 • Seattle/Tacoma, WA 1-866-695-5008 • San Jose/San Francisco, CA 1-800-695-5007
Equipment that saves lives! 17
DP Nicoli offers the expertise needed to help determine the
best shoring choices for your projects. Product flexibility,
on-time delivery and the assistance needed to plan and carry
through your plans. See www.dpnicoli.com for full details.
Barriers, Bridges & Training
Barriers that are: faster, easier, cost efficient, and ready on a moments
notice! Rapid Deployment — The DP Nicoli Plastic Water Filled
Barriers offer 2 Man placement and easy Locking System. These light
weight (when empty) barriers are easy to transport, set-up, water fill
and offer the barrier protection you need without the hassels of
cement barriers.
Temporary Bridges. Provide a safe, OSHA-certified pedestrian
crossing over open excavations. This bridge allows full access for
disabled individuals, and meets the criteria of the Americans with
Disabilities Act. Four pick points make it easy to lift and position. It has an
inside width of 48" by 9’ and 12’ lengths, and weighs about 40-lb per
linear foot.
Competent Persons Training. In our pursuit of excavation safety DP
Nicoli offers contractors Competent Person Training. Your supervi-
sors, foreman and laborers can get the training they need to help
ensure a safe job site. DP Nicoli offers a 3 hour refresher course as
well as an 8 hour class for the first time attendant. These classes
cover trench excavations, soil analysis, proper shoring installation,
and confined spaces. This class is presented using slides and
attendees are encouraged to participate in our open discussions on
experiences they have encountered.
Pedestrian Bridge available in Oregon and California
Aluminum Bridge available in California
Contact DP Nicoli shoring specialist for more information
Barriers
LengthInchesPlastic Water Filled Barriers Width
InchesModel
NumberRate
M.P.H.
72727272
100105170275
Weigh EmptyPounds
24242424
20-2535 or less35 or less
45 - 62
142L142CR
142142 350
HeightInches
42424242
Competent Persons Training
Bridges
Pedestrian
DP Nicoli offers Safety Orange as our standard
color with other colors available by special order.
All 3 models offer an easy fill
hole with secure cap, as well as
a removable drain plug located
on the lower side of each barrier.
Lineal setup is quick
and easy with a
secure tongue &
groove connection
of each barrier.The 350 model
offers reinforced
connector bars for
added strength and
protection.All models made
with high-density
polyethylene for
long-use life and
ease of portability.
Training
Aluminum
18 Equipment that saves lives!
Soil classifications, calculating
depth ratings, and sizing a shieldHow to Size a Trench Shield
OSHA’s excavation standard contains many different requirements as well as several appendices that can be confusing at first glance. The following information summarizes the main requirements in order to help contractors prepare the job site for OSHA inspections.
• Prior to digging, the contractor shall locate and identify all under-ground utilities such as sewer, telephone, fuel, electric, water lines, etc. that may be encountered during the excavation.
• The contractor must designate a competent person or qualified person to assess the excavation and determine that it is safe for project personnel to enter and work.
• All surface encumbrances such as signs, trees, fences, poles, sidewalks, etc. that create a hazard to employees must be removed or supported during the excavation.
• All excavating must maintain a minimum of 10 ft. from overhead power lines rated 50 kV or less, with 0.4 inches of clearance added for every kV over 50.
• Support systems shall be provided to ensure the stability of adjacent structures endangered by excavation operations.
• If excavation is over 5 ft. deep, a protective system such as a trench shield shall be used to prevent a cave-in.
• The contractor must provide a safe means of entering or exiting any excavation over 4 ft. deep.
• A means of egress from a trench such as a ladder, ramp, or stairway shall be located within 25 ft. of workers.
• Shielding systems shall be installed and removed in a manner that protects employees from cave-ins, structural collapses, or from being struck by members of the support system.
• Shielding systems shall be installed in a manner to restrict lateral or other hazardous movement of the shield in the event of a sudden collapse.
OSHA RequirementsOSHA 29 CFR Part 1926.650-652 Subpart P-Excavations
How to determine the depth of cut:
• Slope must start 18” or 1.5 feet below the top of the shield.
How to determine the width of a trench shield:
• Trench Shield width determined by O.D. of the pipe or the O.D. of the excavator bucket.
• Allow 6” of clearance on each side of the pipe bell.
• Shield should be a minimum of 12” wider than the excavator bucket O.D.
How to determine the length of a trench shield:
• Inside length clearance of pipe is approx. 2’ less than the overall length of the shield.
• Shield must be 2’ to 4’ longer than the pipe.
How to determine the machine lift capacity:
• 1.5 times the shield weight at 20’ radius at grade.
No Soil is Type “A” if:
• It is fissured. • It is subject to vibration. • It has been previously disturbed. • It is part of a sloped, layered system which
dips into the excavation on a slope of 4 horizontal to 1 vertical [4H:1V] or greater.
• It is subject to other factors requiring classification as less stable.
Type “B” Soil:
• Cohesive soil with unconfined compression strength greater than 0.5 tsf but less than 1.5 tsf.
• Granular cohesionless soils, e.g., gravel, silt, silt loam, sandy loam.
• Type “A” fissured or subject to vibration.
• Unstable dry rock.
• It is part of a sloped, layered system which dips into the excavation on a slope less steep than [4H;1V], but only if the material would otherwise be classified as Type “B”.
Type “C” Soil:
• Cohesive soils with unconfined compres-sion strength of 0.5 tsf or less.
• Granular soils including gravel, sand, and loamy sand.
• Submerged soil or soil from which water is freely seeping.
• Submerged rock that is not stable.
• Sloped, layered system which slopes into an excavation at an angle of 4H:1V or steeper.
Calculating Depth Ratings:
PSF ratings and depths are based on short exposure with excavation open a period of time equal to 24 hours or less.
Lateral pressure per foot of depth:
• Type “A” Soil = 25 lbs. • Type “B” Soil = 45 lbs. • Type “C” Soil = 60 lbs.
Depth rating using shield capacity (lbs.):
• 1200 / 25 = 48 ft. • 1200 / 45 = 27 ft. • 1200 / 60 = 20 ft.
Soil Definitions:
• Apparent cohesion • Plastic• Cemented soil • Saturated soil• Layered soil • Submerged soil
The following information is useful for determining the proper trench shielding for your projects.
The following will explain how to
determine the specifications to
use on worksheet:How to Size a Trench Shield
Depth of Cut*:
Soil Conditions*
Type “A” (25#):
Type “B” (45#):
Type “C” (60#):
Hydrostatic:
*See depth certification chart.
Outside Pipe Diameter:[Shield must be a minimum of 12” wider than the pipe]
Pipe Length:[Shield must be 2’ to 4’ longer than the pipe]
Bucket Width:[Inside shield: 12” less than shield]
Machine Lift Capacity:[1.5 times shield weight at 20’ radius]
WORKSHEET
Oregon/SW Washington 1-800-695-5006 • Seattle/Tacoma, WA 1-866-695-5008 • San Jose/San Francisco, CA 1-800-695-5007
Oregon/SW Washington 1-800-695-5006 • Seattle/Tacoma, WA 1-866-695-5008 • San Jose/San Francisco, CA 1-800-695-5007
Equipment that saves lives! 19
Pre-Excavation Checklist
Employee Training and Pre-Excavation Briefing:
Does this job require special training? ❍ Yes ❍ No
Safe excavation and rescue training conducted on: (Date)
Mandatory pre-excavation briefing conducted on: (Date)
Soil Classification:
Will the competent person classify the soil based on it’s properties and site conditions? ❍ Yes ❍ No If yes, continue. If no, then soil is assumed to be Type “C”. Based on a visual observation, which best describes the soil in this excavation?❍ Type “A” ❍ Type “B” ❍ Type “C”
Based on a visual observation, which best describes the moisture condition in this soil?❍ Dry Soil ❍ Moist Soil ❍ Wet Soil ❍ Saturated Soil
Based on at least one manual test, what classification is the soil in this excavation?❍ Stable Rock ❍ Type “A” ❍ Type “B” ❍ Type “C
What manual test was used to determine the soil type?❍ Plasticity ❍ Dry Strength ❍ Thumb Penetration ❍ Other (list)
Underground Installations: [Existing Utilities/Obstructions]:Have the estimated locations of all underground installations been determined prior to excavation?❍ Yes ❍ No ❍ Not Applicable
Has Utility companies been contacted and advised of proposed work?❍ Yes ❍ No ❍ Not Applicable
If underground installations are exposed, will they be protected, supported, or removed while excavation is open?❍ Yes ❍ No ❍ Not Applicable
Access and Egress:Are stairways, ramps, or ladders positioned every 25 feet?❍ Yes ❍ No ❍ Not Applicable
Exposure to Vehicular Traffic:Are personnel who are exposed to either public or project traffic wearing reflective or high-visibility vest?❍ Yes ❍ No ❍ Not Applicable
Exposure to Falling Loads:Are employees prohibited from standing underneath loads handled by lifting or digging equipment? ❍ Yes ❍ No ❍ Not Applicable
Protection of Employees from Loose Rock, Soil, or Equipment:Are employees protected from falling rock, soil, or equipment by placing these materials a minimum of 2 feet from the edge of the excavation or behind a retaining device?❍ Yes ❍ No ❍ Not Applicable
Fall Protection:Are standard guardrails provided on walkways and bridges that cross over 6 feet and wider excavations?❍ Yes ❍ No ❍ Not Applicable
Are all excavations that are accessible to the public adequately barricaded or covered when unattended?❍ Yes ❍ No ❍ Not Applicable
Inspections:Are daily inspections of excavations being performed by the competent person?
❍ Yes ❍ No ❍ Not Applicable
Are inspections being performed by a competent person after every rainstorm or other hazard-increasing occurrence?❍ Yes ❍ No ❍ Not Applicable
Are employees removed from the excavation if the competent person finds evidence of a situation that could result in a possible cave-in, protective system failure, hazardous atmosphere, or other hazardous conditions?❍ Yes ❍ No ❍ Not Applicable
Shielding or Shoring:Have all shielding, shoring, or other protective systems been designed by a registered professional engineer and accompanied by tabulated data from the manufacturer?❍ Yes ❍ No ❍ Not Applicable
Are shielding, shoring, and other protective systems checked each day to detect movement and possible failure?❍ Yes ❍ No ❍ Not Applicable
Project Name:
Project Number:
Location:
Project Competent Person:
• The bottom of the shielding system can not be positioned greater than 2 ft. above the bottom of the excavation.
• Shielding systems and their components shall not be subjected to loads which they are not designed to withstand.
• Shielding systems and their components shall be securely connected to prevent predictable failures.
• The removed soil shall not be stockpiled closer than 2 ft. from the excavation’s edge.
• Backfilling shall progress together with the removal of the support systems from excavations.
• Any excavation left unattended must be barricaded, fenced or otherwise protected against accidental entry by pedestrians.
• Employees exposed to vehicular traffic must wear a high-visibility vest, and the excavation must be protected from traffic.
• If employees must cross over an open excavation a safe means must be provided so that the employees do not have to jump across the trench.
• No workers shall enter or work in excavations where standing water is visible unless adequate protection is used.
• No employee shall be permitted underneath loads handled by lifting or digging equipment.
• If the competent person finds evidence of a hazardous situation that may result in a cave-in, protective system failure, a hazardous atmosphere, or other hazardous conditions, exposed employees shall be removed from the hazardous area until the necessary precautions have been taken to ensure safety.
OSHA Requirements, continued
dpnicoli.com
Oregon and SW Washington19600 SW Cipole Rd.Tualatin, OR 97062
800.695.5006
North Bay Area1666 Willow Pass Rd.Bay Point, CA 94565
800.695.5007
South San Francisco266 Harbor WaySouth San Francisco, CA 94080
800.695.5007
Seattle/Tacoma3700 6th Ave. SouthSeattle, WA 98134
866.695.5008
Slide Rail Trench Boxes Sheet Pile Steel Plates Steel Piling Build-A-Box Hydraulic Shoring Manhole Shields Training
Call today to speak with a shoring specialist, or visit us at www.dpnicoli.com
03/2014 14.786
“For 30 years our success has been a reflection of the dedication of our staff and support of you, our customer and partner. Thank you! ”
Please join DP Nicoli as wecelebrate over
3 decades of providing shoring and
safety equipment solutions.