Mission Furniture

Thank You!Thank you for ordering a WOOD® magazine download. We hope you enjoy being part of our online experience and that you have fun expanding your woodworking skills.

Please remember that this copyrighted material is for your use only. It is unlawful to share this file with someone else or to reprint it in any form.

Bill KrierEditor in Chief, WOOD magazine

Adobe Acrobat Reader Troubleshooting Guide

If you can read this page, your Acrobat Reader program is working correctly! But you may still have problems or specific issues, such as printing and saving your downloadable file.

My printer won’t print the text correctlyAlmost all printing problems are due to not enough free system resources memory. The files are very memory intensive because they include graphics, text, and photos. Close all other programs/applications and print directly out of the Acrobat Reader program, not your Web browser.

Patterns are not printing full-sizeMake sure your printer is set to print at 100 percent and that “print to fit” is not checked. These settings are selected in the printer setup or printer options.

I can’t save my file now that it’s downloadedYou must save the plan when you download the file. Download the file again, except this time try right-clicking on the red download button. A menu window will open. Select “Save target as” or “Save link as” to save the file to your hard drive. Once saved, you can open it up with Adobe Acrobat Reader.

For more details on using Adobe Acrobat Reader please visit our online help section at: http://www.woodstore.net/clicherforde.html

WOOD Store Customer Favorites

WOODStore.net Browse more than 1000 plans, projects, books, techniques, & more

Visit the WOOD Store at:

WOODStore.net

Shop Tools & Accessories

Indoor Furniture

Outdoor Furniture

http://www.woodonline.com

DOWNLOADABLE ONLINE WOODWORKING PLANS

®

Page 1 of 6DP-00230 ©Copyright Meredith Corporation 2002

5 Great Clamp

OrganizersSolve your clamp-storage problemsonce and for allwith one or moreof our five customholders. Theseclever wall-hunghelpers not onlykeep all yourclamps at arm’s reach, theyalso look greatdoing it.

1. Spring-clamp holder

2. Bar-clamp rack

3. Locking C-clamp support

4. C-clamp rack

5. Handscrew- clamp organizer

1

2

3

4

5

1"

1fi"

2fi"

2‹"

15›"

3¤"

1‡"

1‡"

‡"

‡" hole

#10 finish(countersunk) washer

#10 x 2‹" F.H. wood screw

SPRING-CLAMP HOLDER

¤" round-over

‰" hole

fi" hole

fi" hole

‡" hole

‡" hole

fi" hole

‰" hole

#10 finish (countersunk) washer

#10 x 2‹" F.H. wood screw

fi" dowel 7" long

Sand a ¤" round-overon front end of dowels.

‡" dowel 7" long

fi" dowel 8" long

‡" dowel 8" long

‡" dowel 10" long

fi" dowel 10" long

1fi"‡"

fi"

1"

Note: All dowel holes drilled at a 5° angle.

TM

Page 2 of 6

1 Simple, sturdy, spring-clamp holder

A backboard with protruding dowels does the job for supporting4", 6", and 9"-long spring clamps. If you’ve got a similar assort-ment of these clamps, the rack shown here should suffice. Ifyou’ve got quite a collection, extend the board or make two ormore holders as needed.

We don’t recommend extending the dowels longer than dimen-sioned on the drawing below. Extended too far, they can getbumped and broken

#10 x 2‹" F.H. wood screw

#10 finish (countersunk) washer

‰" hole

#10 x 2" F.H.wood screws

1fi"

14fl"

14fl"

1"1‡"

‡"

fi"

3fi"

fi" ›"

›"

1fl"1fl"

1fl"

2"

›" round-overs routedbefore cutting notches

4fi" for sliding-head clamps7‹" for Quick-Grip clamps

¸" shank hole, countersunk on back sideMating hole in back edge of front piece is a7⁄64" pilot hole 1‹" deep.

BAR-CLAMP RACK

›"

TM

Page 3 of 6

2 Home for Bar ClampsThe slots in this quick-and-easy holder allowyou to store your sliding-head clamps in perfectorder by simply resting the head on the horizon-tal support. Without the slots, you’d have totighten the jaws to hold a clamp in place, andthen loosen the jaws when you want to removethe clamp from the holder.

To make the slots, cut the horizontal support toshape, rout ›" round-overs along the edges andcorners, and mark the notches 1fl" on center.Mount a ›" dado blade to your tablesaw, andraise the blade 2" above the saw table. Mount awood extension to your miter gauge, and makethe cuts where marked. As shown in the photoon page 1, we built and placed three racks end toend. You also could lengthen the two parts, andcut the number of slots needed to match yoursupply of clamps.

For Quick-Grip clamps, we found that anextended version (2‡" more from front to back)of the rack used to support our sliding-headclamps works wonderfully. The front supportwith its numerous slots holds the clamps uprightand keeps them from dinging the wall.

TM

Page 4 of 6

3 Nifty support for locking C-clamps

Projects often require clamping pressure applied sev-eral inches in from the outside edges for a good bond.When this happens, we turn to our locking C-clamps,the largest of which has a throat depth of more than15". To hang our collection of locking C-clamps, wefound this screw-together support an organizer’sdream.

#10 finish(countersunk)washer

#10 x 2‹"F.H. woodscrew 12"

All stock is fi"-thick.

‰" hole

1"

fi"

3"2fi"

¤" round-over

#17 x 1" brads

fi" #17 x 1" brads

LOCKING C-CLAMP SUPPORT

TM

Page 5 of 6

4 All-in-row C-clamp rack

When the job calls for plenty ofclamping pressure, no-nonsense C-clamps provide the answer. To hangand organize this type of clamp,build our four-piece wall-mountedhanger with its notched front sup-port. The notches allow you to hangthe clamps on the rack without hav-ing to tighten them.

1fi"

#10 x 2‹" F.H.wood screw

#10 x 2" F.H. wood screw

21‡"

‡"

‡"

5/32" shank hole,countersunkon back side

1" dowel3" long

7⁄64" hole 1" deepon both ends

1fi"

1fi"Œ"

‡"

‡"

¤" round-oversrouted before cutting

fi"

¸" shank hole, countersunk

#10 x 2" F.H. wood screw

‡"

‡" Œ"

Œ"1fi"

1"

7⁄64" hole 1" deep on both ends

1" dowel 3" long

‰" shank holes

¸" shank hole,countersunkon back side

‡"

C-CLAMP RACK

#10 finish(countersunk)

washer

TM

Page 6 of 6

5 Handscrew-clamp hangout

If there was ever a simpler orga-nizer for handscrew clamps, wehaven’t seen it. Just cut the sup-port extension (A) to fitbetween the threaded rods ofthe clamp, chamfer the outsideend of the support, and securelymount it to the backboard (B).We’ve found that about fourclamps per support is a fullload. ¿

B

A

#10 finish(countersunk) washer

#10 x 2‹" F.H.wood screw

#10 finish (countersunk) washer

#10 x 2‹" F.H. wood screw

¤" round-over

‰" hole

#10 x 2" F.H.wood screws

1"

‰" hole

‡"‹" chamfer

2⁄3 ofoveralllength

of clamp

Length equalsthicknessof 4 clamps

AWidth of clamp when hung on

¸" holes,countersunkon back side

Distance betweenthreaded rods

minus ‹"

HANDSCREW-CLAMP ORGANIZER

The purchase of these plans does not transferany copyright or other ownership interest in theplans, the design, or the finished project to thebuyer. Buyer may neither reproduce the plansfor sale nor offer for sale any copies of the fin-ished project.

Produced by Marlen KemmetProject designs: Richard Tollesfson; Jim Boelling; James R. DowningGraphic Design: Jamie DowningIllustrations: Roxanne LeMoinePhotographs: Wm. Hopkins©Copyright Meredith Corporation 2002

Browse more than 1,000 woodworking project plans, articles, tool reviews, books, techniques, & more. Each plan includes step-by-step instructions, professional color photography, and detailed illustrations.

WOODStore.net

Plans Techniques Articles Publications

Looking for information from Leading woodworking companies?

WOODWorkersCenter.com is just the site for your woodworking tool, accessory, and service informational needs. Use the online info request feature to request these companies latest catalogs or info.

WOODWorkersCenter.comWOODmagazine.com

a weaLth of information just a cLick away

The online presence of WOOD magazine, WOODmagazine.com speaks to online users of all woodworking skill levels with free woodworking plans, helpful forums, numerous articles, to help you become a better woodworker.

WOODmagazine.com/videosprofessionaL, portaBLe Video The biggest names in woodworking help you build your skills with downloadable videos.

By woodworkers, for woodworkers Watch free videos of other woodworkers showing their stuff.

watch a demo Before you Buy Don’t spend a penny on a tool or accessory until you learn how it works and what it can do.

free magaZine support 24/7 WOOD magazine editors provide more than 120 streaming videos, from 2 to 10 minutes in length.

More from WOOD Magazine