TRANSFER CASES
OVERVIEWAxleTech’s transfer case product line is engineered to meet the increasingly rugged demands of high-mobility vehicles. Our transfer cases provide gear ratio versatility, front or rear outputs, optional integral air-engaged PTOs, and interaxle differential. Additional features include helical direct drive gearing, main shaft tapered bearings, magnetic drain plugs, and a wide variety of yokes and flanges. We provide factory-installed oil pumps as standard equipment to assure low-speed lubrication. In addition to complete assemblies, we also offer components and remanufacturing of transfer cases.
TRANSFER CASES
FEATURES AND BENEFITS
Internal lubrication system
• Oil flows to key bearing areas at low speeds and at initial start-up conditions• Additional oil pump is available – allows for an external oil flow with the vehicle radiator to keep an
acceptable oil temperature in the bearings- Eliminates typical initial oil drop- Extends oil change intervals- Permits lower operation oil temperatures
Input speeds up to 3500 RPM • Compatible to many engine / transmission powertrain combinations to meet OEM requirements
Strength in design• Forged gears, induction-hardened shafts, and tapered roller bearings ensure the transfer case is high-
strength and lightweight while also prolonging product life• Integral air actuated, 3 positions, high/low range shift unit provides reliable shifting with control sensor
Modularity of customized solutions(on largest model)
• Different drops available• Flanged option on a through drive carrier is available for compact vehicle applications• Large selection of both yoke and flange options
TECHNICAL SPECIFICATIONSTRANSFER CASE T232 T600 T750 T800 T1224
Engine power HP (kW) Up to 180 (135) Up to 300 (223) 275 (205) 450 to 600 (336 to 447) 450 (336)
Maximum input speed RPM 3500 3500 3500 3500 4000Torque capacity ft-lb (Nm) 3,872 (5,250) 7,744 (10,500) 7,744 (10,500) 18,439 (25,000) 13,000 (17,630)
High speed ratios 0.9 or 1.00 0.9 or 1.00 1.00 0.8, 0.9, or 1.00 1.00
Low speed ratios 1.85, 1.95, 2.07 or 2.45
1.93 or 2.45 2.45 1.95 2.02
Differential 33/67 pneumatic lockable
33/67 pneumatic lockable
None 33/67 or 50/50 pneumatic lockable
None; front axle pneumatic lockable
Housing type Iron and Aluminum Iron Cast iron Aluminum AluminumDrop sizes in (mm) 8.7 (222) 9.4 (240) 11 (272) 13, 16, 19 (323, 409,
479)7.05 (179) vertical drop, 11.02 (280) horizontal offset to right
Weight* lb (kg) Iron: 210 (95 ) Aluminum: 170 (78)
342 (155) 160 (73) Short Drop: 750 (340) Long Drop: 794 (360) Extra Long Drop: 1,345 (610)
605 (275)
Options Parking brakePower Take Off pneumatic lockable
Oil cooling pumpFront output air operated
Without differentialSpeed sensor
Transfer cases are only available in stand-alone version
Front output disconnect
Flanged output for mounting directly to differentialParking brakePower Take Off pneumatic lockableOil cooling pumpEmergency steering pumpFront output air operatedSpeed sensorTransfer cases are available in the following configurations: stand alone short drop, stand alone long drop, flanged short to long drop, and extra long drop stand alone or flange.
Speed sensorStand-alone version Parking brake
TECHNICAL SPECIFICATIONSDROP BOX Flanged on 4000 DG Carrier Flanged on Allison Transmission
Engine power HP (kW) 400 to 600 (300 to 447) 450 to 600 (335 to 447)Maximum input speed RPM 3500 3500Torque capacity ft-lb (Nm) 18,439 (25,000) 18,439 (25,000)High speed ratios 1:1 1:1Low speed ratios 1:1 1:1 Differential 33/67 and 50/50 pneumatic lockableHousing type Aluminum AluminumDrop sizes in (mm) 18.7 (476) 10.7 (273)
Options
Flanged to 4000 TD carrierParking brakePTO pneumatic lockableReverse input and PTO
PTO pneumatic lockableOil cooling pump
*Weight is approximate dry weight and does not include options.
NOTE: Options may not be available on every axle configuration. Rating, ratios and main dimensions are subject to AxleTech Engineering approval.
TROY, MICHIGAN
SÃO PAULO, BRAZIL
SAINT-ÉTIENNE, FRANCE
PUNE, INDIA
TAISHAN, CHINA
SHANGHAI, CHINA
CHICAGO, ILLINOISOSHKOSH, WISCONSIN
WORLD HEADQUARTERS
AXLETECH LOCATIONS
SALES AND SERVICE
ABOUT USAxleTech is a leading specialty vehicle powertrain technology company. We have the expertise and knowledge to design, develop, and build custom-engineered drivetrain systems for an array of on-highway and off-highway applications. For leading technology, quality, dependability, and durability, the rock-solid choice is AxleTech.
© 2018 AxleTech International LLC. All rights reserved. AxleTech and AxleTech International are registered trademarks of AxleTech International IP Holdings, LLC. All other brands and product names are trademarks or registered trademarks of their respective owners. Information supplied by AxleTech is believed to be accurate and reliable. AxleTech reserves the right, without notice, to makes changes in product design or specifications.
AXLETECH.COM
HEADQUARTERSAxleTech1400 Rochester RoadTroy, Michigan 48083 USA
+1 877-877-9717Int’l +1 248-658-7200
EMAIL OE: [email protected]: [email protected]
1919 1953
1988
ACQUISITIONS OF US GEAR,
TRUCK TRAILER TRANSIT
ACQUISITION OF SOMA
ROCKWELL INTERNATIONAL
2008
1997 2002 2018