Download - TM-81 Condenser Cleaner 5125
-
8/13/2019 TM-81 Condenser Cleaner 5125
1/6
Model 512500 &512500AP (Air Purge)Condenser Cleaner
For Tube I.D. 1/2 to 2(12.7mm thru 50.8mm)
Operating and Maintenance Instruction
Elliott Tool Technologies Ltd 1760 Tuttle Avenue Dayton, Ohio 45403 U.S.A.
Phone: +1 800 332 0447 +1 937 253 6133 Fax: +1 937 253 9189
Elliott Tool Technologies UK Ltd Broadstone Hill Old Chalford Chipping Norton OXON OX7 5QPhone: +44 (0) 1608 672815 Fax: +44 (0) 1608 672810
TM-8110-13-04
retubingtools
Tube Gauges
Tube Cutters
Manual Tools
Spear Type Tube Pullers
Collet-Type Tube Pullers
CYCLGRIP Tube Extractors
Grooving Tools
End-Prep Tools
metal workingproducts
Back Chamfering Tools
Carbide Roller Burnishing Tools
Diamond Burnishing Tools
Elliptical Deburring Tools
Fine Boring Tools
Internal Recessing Tools
Magic Vise
Mechanical Joining Tools
Roller Burnishing Tools
Single Blade Reamers
tubeexpanders
Boiler Expanders
Heat Exchanger Expanders
Condenser Expanders
Refinery Expanders
tube rolling motors& torque controls
Electric
Pneumatic
tubecleaners
Air & Water Driven Motors
(Internal/External Drives)
Jiffy Guns
(Shoot-Thru Devices)
Roto-Jet
(Rotating Flex Shaft)
additionalproducts
Tube and Joint Testers
Tube Plugs
(High & Low Pressure)
Elliott offers a complete line of precision tube tools, including:
www.elliott-tool.com
-
8/13/2019 TM-81 Condenser Cleaner 5125
2/6
TM-81 Model 512500 & 512500AP (Air Purge) Condenser Cleaner
Drills and Brushes
Condenser and Heat Exchanger Tube Cleaning Dril ls and Brushes for 5224XLTube Cleaners
* Drill studs are required for CT type drills.** Drill couplings are required for drill tips and twist drills.
*** Brush standard material is steel, brushes are also available in brass and stainless s
Other size drills and brushes are available, contact Customer Service for details.
Tube ODTube
GaugeTube ID
Inch (mm) BWG Inch mm
*CT Drill
Part No.
*Drill
Stud
PartNo.
**Drill Tip
Part No.
**Drill
Coupling
Part No.
El Paso **Twist Drills *** B
16 .370" 9.40 502
17 .384" 9.755029-359 5005-359
1/2"(12.7mm)
18 .402" 10.21 5029-390 5005-390502
12 .407" 10.32 5029-390
5039K Not Available
5005-390
Not Available
502
13 .435" 11.05 5029-422 502
14 .459" 11.665039A 5100-422 5100B 5005-422 5172-426
502
15 .481" 12.225029-446
5100-468 5005-468 5172-468 502
16 .495" 12.57
17 .509" 12.935029-480
5039B5100-480 5005-480 522
5/8" (15.8mm)
18 .527" 13.39 5029-512 5100-512 5005-512
5172-475
52212 .532" 13.51 522
13 .560" 14.225029-512
5039C5100-512
5100C
5005-512 5172-507522
14 .584" 14.83
15 .606" 15.395029-568 5100-568 5005-568 5172-564 522
16 .620" 15.75
17 .634" 16.105029-604 5100-604
5100P
5005-604 5172-600 522
3/4" (19.0mm)
18 .652" 16.56 5029-640 5100-640 5005-640 5172-632 522
12 .657" 16.69 522
13 .685" 17.405029-640 5100-640 5005-640 5172-632
522
14 .709" 18.01
5039D
15 .731" 18.575029-691 5100-691
5100E
5005-691 5172-689 522
16 .745" 18.92
17 .759" 19.285029-727 5100-727 5005-727 5172-725 522
7/8" (22.2mm)
18 .777" 19.74 5029-759 5100-759 5005-759 5172-757 522
12 .782" 19.86 522
13 .810" 20.575029-759
5039E
5100-759
5100F
5005-759 5172-757522
14 .834" 21.18
15 .856" 21.745029-812 5100-812 5005-812 5172-814 522
16 .870" 22.09
17 .884" 22.455029-848
5039F
5100-848 5005-848 5172-850 522
1" (25.4mm)
18 .902" 22.91 5029-880 5039G 5100-880
5100G
5005-880 5172-882 5226
CT Drill
El Paso Drill
For Soft Deposits.These drills are carbide tipped
for hard deposits.
Twist Drill
Drill Tip
For Gummy Dep
Fulfilled Bru
For Powder Depand Polishin
-
8/13/2019 TM-81 Condenser Cleaner 5125
3/6
-
8/13/2019 TM-81 Condenser Cleaner 5125
4/6
-
8/13/2019 TM-81 Condenser Cleaner 5125
5/6
-
8/13/2019 TM-81 Condenser Cleaner 5125
6/6