![Page 1: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/1.jpg)
KIT – University of the State of Baden-Württemberg and National Laboratory of the Helmholtz Association
Institute for Applied Materials (IAM-ESS)
www.kit.edu
Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and Limitations
Michael Bruns
![Page 2: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/2.jpg)
2 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
The Merger of Forschungszentrum Karlsruhe and Universität Karlsruhe
1956 Karlsruhe Nuclear Research Center
10/ 2009 KIT Campus North
![Page 3: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/3.jpg)
6 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
XPS • Quant. Chemical
Information • Depth Profiles
ToF-SIMS • Chemical &
Molecular Information
• 3D Elemental Information
FE-SEM Topography
EDS Elemental Images
Surface Analysis
inert transfer
Thermo Fisher Scientific: K-Alpha & Glovebox ESCA5/Alpha110
Zeiss GmbH: Merlin
ION-TOF GmbH: TOF.SIMS 5
![Page 4: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/4.jpg)
7 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
Textbooks
~ 60 ~ 200 € ~ 200 €
X-ray Photoelectron Spectroscopy XPS Auger Electron Spectroscopy AES Time-of-Flight Secondary Ion Mass Spectrometry ToF-SIMS
www.xpssimplified.com
![Page 5: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/5.jpg)
8 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
![Page 6: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/6.jpg)
9 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
Surface Analysis
Top Surface
Bulk
Coating
Near Surface
Thin Film
3 nm 10 nm
10-100 nm
100-1000 nm
Top Surface Near Surface
Top Surface
Coating
Near Surface
Thin Film
Bulk Analysis
Thin Film Analysis
Surface Analysis
![Page 7: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/7.jpg)
10 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
Surface Analysis Analytical Resolution Versus Detection Limit
![Page 8: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/8.jpg)
11 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
X-Ray Photoelectron Spectroscopy (XPS) Relationship to Electronic Structure
EB = hν - EK - ω
John F. Watts, John Wolstenholme, An Introduction to Surface Analysis by XPS and AES, Wiley & Sons, Chichester, UK, 2003
(mono) Al Kα 1486.6 eV Mg Kα 1253.6 eV
s singlet p doublet (3/2 & 1/2) d doublet (5/2 & 3/2) f doublet (7/2 & 5/2)
Au
![Page 9: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/9.jpg)
12 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
XPS Characteristics
Application Lab, UK
Theta Probe
VG ESCA5 & Thermo Fisher Alpha 110 Analyzer Thermo Fisher K-Alpha
Depth of analysis 5nm All elements except hydrogen Readily quantified All materials (ultra high vacuum compatible) Depth profiling by angle resolved XPS or sputtering Analysis area mm2 to 30 micrometres Chemical images
Complementary Methods ToF-SIMS
LEIS
RBS
FE-SEM &EDS
TEM
![Page 10: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/10.jpg)
13 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
XPS Instrumentation: X-Rays
Mg
![Page 11: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/11.jpg)
14 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
XPS Instrumentation: Concentric Hemispherical Analyzer
Mu-Metal: Ni 81/Fe19 - Alloy
+
- -
Channeltron
![Page 12: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/12.jpg)
15 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
Speziation / Chemical Shift
![Page 13: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/13.jpg)
16 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
Speziation – Chemical Shift
![Page 14: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/14.jpg)
17 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
XPS: Depth of Analysis
5.0~ E∝λ
Intensity as a function of depth 65% of the signal from < 1λ
85% from < 2λ
95% from < 3λ
![Page 15: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/15.jpg)
18 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
X-Ray Induced Auger Emission
EKL2,3L2,3(Z) = EK(Z) – [EL2,3(Z) + EL2,3(Z + 1)]
![Page 16: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/16.jpg)
19 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
MgKα vs. AlKα X-Rays 1253.6 eV 1486.6 eV
• XPS and Auger peaks
![Page 17: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/17.jpg)
20 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
Electron Spectroscopy (AES) Electron Solid Interactions
X-rays
Auger-Electrons Secondary Electrons
Primary Electron Beam
Backscattered Electrons
Exitation Volume
Surface
3µm
• All elements Z>2
• Conducting and semi- conducting surfaces
• Spatial resolution <10nm
• Detection limit >0.1at.%
• Quantitative elemental information
![Page 18: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/18.jpg)
22 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
MgKα vs. AlKα X-Rays 1253.6 eV 1486.6 eV
• XPS and Auger peaks
• Shake-up/off satellites
• X-ray satellites
• Background
• Surface charging
![Page 19: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/19.jpg)
23 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
( ) ( )
( ) I E I I
I E dE
I E dE b b b a
x x x b
x x x a
* = − ∗ ∫
∗ ∫
0
0
Shirley Type Background
![Page 20: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/20.jpg)
24 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
Monochromatic AlKα X-Rays FWHM 0.85 0.26 eV
Bragg: nλ = 2d sinθ θ = 78.5°, AlKα Quartz 1010
multi-channel detector
photoelectrons focused by
high-transmission lens
anode
electron gun
toroidal crystal
180° spherical sector analyser
![Page 21: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/21.jpg)
25 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
Speciation: SAMs for Biological Applications X-Ray Induced Damage
281282283284285286287288289290binding energy [eV]
inte
nsity
[arb
itrar
y un
its]
C 1s
SAM alteration dependant on the X-ray exposure time (-- as received, -- 9 min., -- 21min., -- 27 min.).
microfocused X-rays 1. Multi-point analysis with
short acquisition time 2. Collapse data set to one
single spectrum
CH3 O O O O S Au
C-O C-H
![Page 22: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/22.jpg)
26 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
SH O O CH33
SCH3
S O O
O
NH
ON
NN
NH
NH2
6
Thiol-SAMs
EG3OMe thiol
Benzylguanine disulfide (BGT)
Methoxy-capped tri(ethylene glycol) undecanthiol
1. S. Engin, V. Trouillet, C. M. Franz, A. Welle, M. Bruns, and D. Wedlich, Langmuir 26 (2010) 6097-6101. 2. M. Bruns, C. Barth, P. Brüner, S. Engin, T. Grehl, C. Howell, P. Koelsch, P. Mack, P. Nagel, V. Trouillet,
D. Wedlich, R. G. White, Surf. Interface Anal. 44 (2012) 909–913.
![Page 23: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/23.jpg)
27 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
Protein of interest
SNAPS
6
O
OO
NH
ON
NN
NH
NH2
SAu
CH3
SAu
S
O
O CH3
Au
3
S
O
O CH3
Au
3
S
O
O CH3
Au
3
Applications
cell culture: cell adhesion, migration, differentiation
biosensors in diagnosis, lab-on-chip technology, …..
SNAP-tag system for covalent immobilization of proteins
SNAP-tag system: genetically modified O6-alkylguanin-DNA alkyltransferase
![Page 24: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/24.jpg)
28 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
Thiol – SAMs for Biological Applications
158160162164166168binding energy [eV]
inte
nsity
[arb
itrar
y un
its]
Au-S-C S 2p
280282284286288290292binding energy [eV]
inte
nsity
[arb
itrar
y un
its]
C 1s -C-O-C-
O-C=O
-CH-
-C=O
528530532534536binding energy [eV]
inte
nsity
[arb
itrar
y un
its]
O 1s -C-O-C-
O-C=O
394396398400402404binding energy [eV]
inte
nsity
[arb
itrar
y un
its]
N 1s -NH- -N=
pure BGT
EG3OMe
S O O CH3Au 3
SCH3
S O O
O
NH
ON
NN
NH
NH2
6
BGT
EG3OMe
Au
![Page 25: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/25.jpg)
29 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
XPS Information Depth … Depends on Electron Emission Angle
![Page 26: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/26.jpg)
30 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
Parallel ARXPS: non-Destructive Depth Profile
![Page 27: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/27.jpg)
31 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
CH3 O O O O S Au
Au
-S-
-CH2- -C2H4O-
Parallel ARXPS: EG3OMe SAM non-Destructive Depth Profile
0
20
40
60
80
100
120
-0.2 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0
atom
ic c
once
ntra
tion
[%]
depth [nm]
C 1s
O 1s
![Page 28: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/28.jpg)
32 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
High-sensitive Low Energy Ion Scattering SAM Thickness
Reliable estimation of the SAM thickness is prerequisite for the reconstruction of non-destructive elemental depth profiles from parallel ARXPS data. Qtac 100
Projectile: 3 keV 3He+ Au peak onset energy shift: EG3OMe = 200 eV 2.2 nm SAM thickness
well-ordered SAM
CH3O
O
O
O
SAuAu
27°
![Page 29: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/29.jpg)
33 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
ER PES: EG3OMe SAM non-Destructive Depth Information
CH3O
O
O
O
SAu
Au
-S-
-CH2- -C2H4O-
330 eV 1100 eV
![Page 30: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/30.jpg)
34 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
Sputtering Ion Solid Interaction
Implantation
![Page 31: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/31.jpg)
35 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
Depth Information via Sputter Depth Profiles
Ar+ ion source X-rays
Analyzer
![Page 32: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/32.jpg)
36 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
XPS Sputter Depth Profiles
Collaboration: Tascon GmbH, Heisenbergstr. 15, D-48149 Münster, Germany
5 0 0 .0 µm
DP Point BST right 2
![Page 33: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/33.jpg)
37 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
XPS Sputter Depth Profiles Time-to-Depth Conversion
iA
iiP
eNtMYjtz
ρ⋅⋅⋅⋅⋅
=0
)(
jP = Ion beam density
NA = Avogadro constant
e0 = Elementary charge
t = Sputter time
Yi = Sputter yield
M = Molecular weight
ρi = Density
![Page 34: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/34.jpg)
38 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
XPS Sputter Depth Profiles Loss of Chemical Information
Ti 2p
• 1 keV Ar+ ions • 20 s / level
450455460465470475binding energy [eV]
inte
nsity
[arb
itrar
y un
its]
Level 0Level 1Level 2Level 3Level 4
Ti4+
TiO2
![Page 35: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/35.jpg)
39 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
ToF-SIMS Time-of-Flight SIMS Principle
A short-pulsed ion beam defines the starting point of the time-of-flight measurement.
All secondary ions are accelerated to the same kinetic energy: the time-of-flight for a given drift path varies as the square root of mass.
Time focusing devices (i.e. electrostatic fields) for good mass resolution.
![Page 36: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/36.jpg)
40 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
ToF-SIMS Ion Solid Interaction
Excitation Bombardment with primary ions, energy: 5-25 keV (Ga+, Aun+, Bin+, O2+, Cs+, Ar+, Xe+, ...) Collision cascade in solid
Results Desorption of neutrals (95%), electrons, and secondary ions (+/-). area 5-10 nm diameter depth of origin 1-2 monolayers
Implantation of primary ions Atoms relocation (mixing) Damaging of organic molecules
![Page 37: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/37.jpg)
41 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
+ detection of all elements + isotope sensitivity + chemical information molecules, clusters + low detection limit ppm - ppb + small information depth first 1-3 monolayers + high depth resolution <1 nm + high lateral resolution <100 nm + high mass resolution > 16000 + high mass range up to 10000 u + parallel mass detection - quantification limited typical ion yield 10-1 - 10-5
(requires standards) strong influence of chemical environment -/+ destructive
ToF-SIMS Characteristics
![Page 38: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/38.jpg)
42 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
ToFSIMS Modes of Operation
Surface Spectroscopy
Surface Imaging
Depth Profiling
3D Analysis
Quasi non-destructive surface analysis of the outer monolayers Features: - elemental and molecular
information - ppm/ppb sensitivity - suited for insulators
![Page 39: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/39.jpg)
43 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
Si-Wafer
R = 13,000
SiH+
29Si+
1.0
2.0
3.0
4.0
x102
19.00 18.96 19.04
18OH-
F-
Mass Calibration Mass Resolution
Surface Spectroscopy High Mass Resolution in Positive and Negative Polarity
![Page 40: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/40.jpg)
44 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
1 Monolayer = 1.5E15 atoms/cm²), the error is estimated to be within a factor of 2-3.
Element detection limits detection limits (atoms / cm2) (atoms / cm2) 7Li 1E7 52Cr 1E8 11B 5E7 55Mn 1E9 Na 1E7 56Fe 2E8 24Mg 2E7 58Ni 1E9 Al 2E7 Co 2E8 39K 1E7 63Cu 3E8 40Ca 3E7 69Ga 1E9 48Ti 2E8 *As 3E9 51V 2E8 98Mo 6E9
ToF-SIMS Detection Limits
= 0.4 ppt
![Page 41: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/41.jpg)
45 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
Surface Spectroscopy
Surface Imaging
Depth Profiling
3D Analysis
Chemical Mapping of the surface Features: lateral distribution of elements and
molecules lateral resolution down to 60 nm parallel acquisition of all images
ToFSIMS Modes of Operation
![Page 42: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/42.jpg)
46 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
(Bio)Molecular Surface Patterning by Phototriggered Oxime Ligation via shadow-mask techniques
T. Pauloehrl, G. Delaittre, M. Bruns, M. Meiβler, H. G. Börner, M Bastmeyer, and C. Barner-Kowollik, Angew. Chem. Int. Ed., 51 (2012) 9181 –9184.
XPS
ToF-SIMS
![Page 43: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/43.jpg)
47 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
ToFSIMS vs. XPS Chemical Image
O1s Snap
O1s Snap SnO2
SiO2
O 1s
ToFSIMS (1 min acquisition time) XPS (> 3000 min acquisition time)
500x500 µm2
Si
Sn
! Different positions !
XPS chemical images are very time consuming Parallel imaging using Thermo Scientific
ESCALAB 250 Xi
![Page 44: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/44.jpg)
48 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
ToFSIMS Modes of Operation
Surface Spectroscopy
Surface Imaging
Depth Profiling
3D Analysis
Analysis of the in-depth distribution of elements and molecules Features: elemental and cluster information depth resolution < 1 nm thin layers from 1 nm to > 10 µm
![Page 45: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/45.jpg)
49 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
ToFSIMS Sputter Depth Profiling Dual Beam Mode
![Page 46: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/46.jpg)
50 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
ECASIA 2013, Cagliari, Italy
ToF-SIMS Sputter Depth Profile of a R.F. Magnetron Sputtered Li-Mn-O Thin Film calibrated by XPS
![Page 47: Surface Analysis by XPS & ToF-SIMS Basics, Strengths, and](https://reader030.vdocuments.us/reader030/viewer/2022012723/61b530a585467d49e63bd508/html5/thumbnails/47.jpg)
51 Institute for Applied Materials (IAM-ESS) Surface Analysis Group
Michael Bruns 18º Workshop SEMAT/UM, Nov. 11th, 2013
Thank you!
Florian Vanessa Volker Vanessa Udo Stemme Trouillet Winkler Oberst Geckle