StellaStellaStellaStella With PulseWith PulseWith PulseWith Pulse
Assemble StellaAssemble StellaAssemble StellaAssemble Stella with Pulse with Pulse with Pulse with Pulse on a level surface close to a sink.on a level surface close to a sink.on a level surface close to a sink.on a level surface close to a sink.
Push the ‘ONONONON’ button on the Stella
until you hear a sound sound sound sound (one beep)instructions on StellaIQ.instructions on StellaIQ.instructions on StellaIQ.instructions on StellaIQ.
Connect the luer tube connector to
channel. Place the filter tube into the instrument
compartment
Place the LidPlace the LidPlace the LidPlace the Lid onto the Base. This will force water to flow
over the side walls of the instrument compartment and
create a complete seal. The Stella
disinfecting segment automatically
minutesminutesminutesminutes. StellaIQ directs Stella Pulse to pump Stella Pulse to pump Stella Pulse to pump Stella Pulse to pump disinfectant through the channel of the instrument for disinfectant through the channel of the instrument for disinfectant through the channel of the instrument for disinfectant through the channel of the instrument for
one minute.one minute.one minute.one minute.
Confirm that the disinfected instrument or the Stella Base will be removed for immediate use or to storage.
Press the OK buttonPress the OK buttonPress the OK buttonPress the OK button on Stella IQ.on Stella IQ.on Stella IQ.on Stella IQ.
With PulseWith PulseWith PulseWith Pulse
on a level surface close to a sink.on a level surface close to a sink.on a level surface close to a sink.on a level surface close to a sink.
’ button on the StellaIQ and Stella Pulse
(one beep). Follow the Follow the Follow the Follow the
Add the
the inner instrument compartment
Connect the luer tube connector to the instruments
channel. Place the filter tube into the instrument
Make up 5 litres of Tristel Fuse for Instruments Make up 5 litres of Tristel Fuse for Instruments Make up 5 litres of Tristel Fuse for Instruments Make up 5 litres of Tristel Fuse for Instruments
instructions on sachet)
onto the Base. This will force water to flow
over the side walls of the instrument compartment and
The StellaIQ displays the
disinfecting segment automatically counting down five counting down five counting down five counting down five
Stella Pulse to pump Stella Pulse to pump Stella Pulse to pump Stella Pulse to pump disinfectant through the channel of the instrument for disinfectant through the channel of the instrument for disinfectant through the channel of the instrument for disinfectant through the channel of the instrument for
After the contact time Stella
automaticallyautomaticallyautomaticallyautomatically
pumps air through the instrument’s
residual disinfectant. This may take up to one minute
When the Stella Base is empty, there is an audible reminder that the cycle is complete.
Confirm that the disinfected instrument or the Stella Base will be removed for immediate use or to storage.
on Stella IQ.on Stella IQ.on Stella IQ.on Stella IQ.
Record the traceability booktraceability booktraceability booktraceability book
download to your PC.
A new cycle can immediately be started by pressing the
buttonbuttonbuttonbutton
Add the pre-cleaned instrument and small parts tray
the inner instrument compartment.
Make up 5 litres of Tristel Fuse for Instruments Make up 5 litres of Tristel Fuse for Instruments Make up 5 litres of Tristel Fuse for Instruments Make up 5 litres of Tristel Fuse for Instruments
instructions on sachet)....
After the contact time Stella drains the disinfectant drains the disinfectant drains the disinfectant drains the disinfectant
automaticallyautomaticallyautomaticallyautomatically. After 40 seconds of draining Stella Pulse
pumps air through the instrument’s channel
residual disinfectant. This may take up to one minute
When the Stella Base is empty, there is an audible reminder that the cycle is complete.
Record the validation code in the patient’s notes or the validation code in the patient’s notes or the validation code in the patient’s notes or the validation code in the patient’s notes or the traceability booktraceability booktraceability booktraceability book. The IQ will store all information ready for
download to your PC.
new cycle can immediately be started by pressing the
buttonbuttonbuttonbutton again.
and small parts tray into Any cables and parts of the instrument that cannot be
submerged, should exit Stella through the designated cutouts on the right
rubber grommets in place
Make up 5 litres of Tristel Fuse for Instruments Make up 5 litres of Tristel Fuse for Instruments Make up 5 litres of Tristel Fuse for Instruments Make up 5 litres of Tristel Fuse for Instruments (see Pour the disinfectantPour the disinfectantPour the disinfectantPour the disinfectant
compartmentcompartmentcompartmentcompartment
compartment.A beep confirms the
drains the disinfectant drains the disinfectant drains the disinfectant drains the disinfectant
fter 40 seconds of draining Stella Pulse
channel to remove
residual disinfectant. This may take up to one minute.
When the Stella Base is empty, there is an audible reminder
If hospital procedure requires you to rinse, lift the lid and
rinse the instrument thoroughly with water of appropriate
quality. Flush the lumen as recommended by local protocol.
The rinse water will drain automatically and immediately.
validation code in the patient’s notes or the validation code in the patient’s notes or the validation code in the patient’s notes or the validation code in the patient’s notes or the information ready for
new cycle can immediately be started by pressing the OK OK OK OK
Turn off Stella IQTurn off Stella IQTurn off Stella IQTurn off Stella IQwill automatically follow the action of Stella IQ
sound to indicate
If the Stella IQ is not turned off manually it will
automatically shut down after 15 minutes to save the battery.
Copyright ©2010 Stella Performance Limited,
PrePrePrePre----clean instrumentclean instrumentclean instrumentclean instrumentdevices thoroughly. Flush
pre-clean solution through
lumens.
Any cables and parts of the instrument that cannot be
submerged, should exit Stella through the designated cuton the right side walls of the Base; otherwise leave the
rubber grommets in place.
Pour the disinfectantPour the disinfectantPour the disinfectantPour the disinfectant solution into the inner instrument inner instrument inner instrument inner instrument
compartmentcompartmentcompartmentcompartment until the liquid overflowsuntil the liquid overflowsuntil the liquid overflowsuntil the liquid overflows into the overflow
compartment. A beep confirms the start of the five minute cyclestart of the five minute cyclestart of the five minute cyclestart of the five minute cycle
If hospital procedure requires you to rinse, lift the lid and
rinse the instrument thoroughly with water of appropriate
Flush the lumen as recommended by local protocol.
The rinse water will drain automatically and immediately.
Turn off Stella IQTurn off Stella IQTurn off Stella IQTurn off Stella IQ by pressing the OFF buttonOFF buttonOFF buttonOFF button. Stella Pulse automatically follow the action of Stella IQ.
sound to indicate that the IQ is switching off (two beeps)
If the Stella IQ is not turned off manually it will
automatically shut down after 15 minutes to save the
Copyright ©2010 Stella Performance Limited, Stella with Pulse Wall Chart V1.
clean instrumentclean instrumentclean instrumentclean instrument and devices thoroughly. Flush
clean solution through
Any cables and parts of the instrument that cannot be
submerged, should exit Stella through the designated cut-of the Base; otherwise leave the
inner instrument inner instrument inner instrument inner instrument
into the overflow
start of the five minute cyclestart of the five minute cyclestart of the five minute cyclestart of the five minute cycle.
If hospital procedure requires you to rinse, lift the lid and
rinse the instrument thoroughly with water of appropriate
Flush the lumen as recommended by local protocol.
The rinse water will drain automatically and immediately.
Stella Pulse . There is a
(two beeps).
automatically shut down after 15 minutes to save the
with Pulse Wall Chart V1.0
