DO NOT REMOVE THIS TAGSEE REVERSE SIDE
DONOT
START
E-SQUARE Alliance (P) Ltd., Delhi
31
T1 T2 T3 T6 T7 T8
T9 T10 T11 T12 T13 T14 T15 T16
T17 T18 T19 T20 T21 T22 T23 T24
DO NOT REMOVE THIS TAGSEE REVERSE SIDE
DONOT
OPERATE
E-SQUARE Alliance (P) Ltd., Delhi
T4 T5
E-SQUARE
A LIFE IS ON THE LINE
DONOT
OPERATE
DO NOT REMOVE THIS TAGSEE REVERSE SIDE
E-SQUARE Alliance (P) Ltd., Delhi
MY LIFE IS ON
THE LINE
DOOPERATE
NOT
NAME:
DATE:
E-SQUARE Alliance (P) Ltd., Delhi
DO NOT REMOVE THIS TAGSEE REVERSE SIDE
UNDER MAINTENANCE
TOOLS
E-SQUARE Alliance (P) Ltd., Delhi
HANDS OFF
DO NOT OPERATE
SIGNED BY:
DATE:
E-SQUARE Alliance (P) Ltd., Delhi
AUTHORISED BY:
DATE:
E-SQUARE Alliance (P) Ltd., Delhi
E-SQUARE Alliance (P) Ltd., Delhi
DO NOT OPERATE
THIS SWITCH
SIGNED BY:
DATE:
Tags Made of 0.5 / 0.7 mm White special grade PVC Sheet
Tags with Protective Liner
MODEL
ES-TAGS
PRODUCT DESCRIPTION
ES-TAG+L
ES-TIES
ES-TAG + 1
Nylon Ties for Tags
Numbered Tags with perforation - specially made as per order.
1 Set (10 Nos. each)
Front Back
DO NOT REMOVE THIS TAGSEE REVERSE SIDE
DONOT
OPERATE
E-SQUARE Alliance (P) Ltd., Delhi
NAME:
DATE:
EQUIPMENTLOCKED OUT
BY
ONLYAN AUTHORIZED PERSONMAY REMOVE THIS TAG
e-mail : [email protected] www.safetylock.net
ES-TAG
E-SQUARE Alliance (P) Ltd., Delhi
DO NOT REMOVE LOCKS
THIS EQUIPMENTIS LOCKED OUT
DANGER
DO NOTREMOVE LOCKS
E-SQUARE Alliance (P) Ltd., Delhi
LOCKED OUT
DO NOT USE:REASON TAGGED
EQUIPMENT DEFECTIVE
PART MISSING
WORK INCOMPLETE
DIRTY
OTHER:
SIGNED BY:
DATE:
E-SQUARE Alliance (P) Ltd., Delhi
DO NOTOPERATE
E-SQUARE Alliance (P) Ltd., Delhi
MAINTENANCELOCK-OUT
THIS TAG & LOCK TO BE
REMOVED ONLY BY PERSON
SHOWN ON BACK
E-SQUARE Alliance (P) Ltd., Delhi
LOCKEDOUT
THIS ENERGY
SOURCE HAS BEEN
THIS TAG & LOCK
TO BE REMOVED
ONLY BY PERSON
SHOWN ON BACK
E-SQUARE Alliance (P) Ltd., Delhi
DO NOTOPERATE
SIGNED BY:
DATE:
STOP
LOCKOUT TAGS
STANDARD SAFETY LOCKOUT TAGS
LO
CK
OU
T T
AG
S
Single Side
DANGER
EQUIPMENTLOCKED OUT
REASON :
This Tag and Lock to beRemoved Only by Person Named Below
SIGNED : DATE :
EQUIPMENT LOCKED OUTNO.
EQUIPMENT ID :
LOCATION :
REASON :
SIGNED : DATE :
Tear off This Strip,Fill in and Give to Your Supervisor
DATE :NO.
www.safetylock.net e-mail : [email protected]
ES-TAG + 1
AUTHORISED BY:
DATE:
E-SQUARE Alliance (P) Ltd., Delhi
DO NOTSTART
SIGNED BY:
DATE:
DO NOTOPERATE
MACHINELOCKED OUT
E-SQUARE Alliance (P) Ltd., Delhi E-SQUARE Alliance (P) Ltd., Delhi
EQUIPMENTLOCKED-OUT
THIS TAG & LOCKTO BE REMOVEDONLY BY PERSONSHOWN ON BACK
! These highly visible safety tags aid the safe running and maintenance of site machinery. Each Tag is manufactured from high impact styrene / flexible polyester - resistant to water, oil and extreme temperatures, ensuring it will withstand a multitude of weather and factory conditions / harshest environments. Safety Tags - Solve all your valve, equipment and accident prevention marking needs.
! Their surface allows you to write on them easily with a marker pen.
! Semi-rigid plastic Tags of 0.5 / 0.7 mm thickness.
! All the Tags can be attached with a Saf-T-Lock devices directly or they can be attached with the help of a Nylon Tie.
! Individual workers use the DANGER TAG while working on the equipments.
! Accident Prevention Tags are used to inform people of probable danger around particular machine or an area or to provide the safety instructions.
! Our quality Tags with nylon cable ties always pass OSHA’s 50-Lb. strength requirement. They are tear proof.
: All kind of Tags can be made as per client's requirement in any Color, Text, Graphic, Company Logo, Dept. Name etc.
Minimum Quantity : 300 Nos. ( Each Graphic ).
* CUSTOMIZED TAGS
*
CUSTOMIZATION ACCEPTED
* CONDITIONS APPLY
E-SQUARE Alliance (P) Ltd., Delhi
AUTHORISED BY:
DATE:
DO NOTOPERATE
THE VALVE
E-SQUARE Alliance (P) Ltd., Delhi
DEFECTIVEEQUIPMENTDO NOT USE UNTIL REMOVED
DATE:
SIGNED BY:
REMARKS :
E-SQUARE Alliance (P) Ltd., Delhi
DO NOTUSE
SIGNED BY:
DATE:
DEFECTIVE
SIGNED BY:
DATE:
ELECTRICIAN'SBLOCKING TAG
SWITCH HAS BEEN BLOCKED
TO PROTECT MY LIFE WHILE WORKING ON
THIS CIRCUIT
Tag to be removed only by me.
E-SQUARE Alliance (P) Ltd., Delhi E-SQUARE Alliance (P) Ltd., Delhi
SIGNED BY:
DATE:
EQUIPMENTLOCKED OUTTO PROTECTWORKERSREPAIRINGMACHINE
E-SQUARE Alliance (P) Ltd., Delhi
ISOLATION POINT
This lockout device to be removed
Only by the person shown at back
Ball Valve Lockout
No.:
E-SQUARE Alliance (P) Ltd., Delhi
This lockout device to be removed
Only by the person shown at back
ISOLATION POINTGate Valve Lockout
No.:
E-mail : [email protected] Website : www.safete.co.za Help line no.: (+27) 11 455 1552 Safety Technologies
Safety Engineering
LO
CK
OU
T T
AG
S
32
LOCKOUT TAGS
ES-CT 10ES-CT 09ES-CT 08
OUT OFSERVICE
DANGER
DO NOT OPERATE
NAME :
DEPARTMENT :
DATE :
ES-CT 07
DONOT
OPERATE
DANGER
NAME :
DEPARTMENT :
DATE :
ES-CT 12ES-CT 11
Design your
own tag
&
We will
make the same for You
DANG
ER
CREATEYOUR OWN
TAGS
CREATEYOUR OWN
TAGS
All kinds of TAGS can be made as per client's requirement in any Color, Text, Graphic, Company
Logo, Department Name, Language etc. Minimum Quantity : 300 Nos. (Each Graphic).
NOTICE
TEMPORARILYOUT OF
USENAME :
DEPARTMENT :
DATE :
DO NOT REMOVE
THIS TAG
NOTES :
SEE OTHER SIDE
CAUTION
CUSTOMIZED TAGS
DO NOT REMOVE
THIS TAG
NOTES :
SEE OTHER SIDE
DANGER
ES-TAG+L
Protective Liner Tag for easy identification of
individuals working on equipment.
These tags are made of 0.7 mm white special
grade PVC sheet with polyester over laminate
to protect the photo and other written data.
Protective Liner Tag
ES-CT 18
THIS
MUST NOT BE USED
OR OPERATED
THIS TAG MUSTONLY BE REMOVED
BY THE PERSONNAMED AT THE
BACK SIDE
OUT OFSERVICE
DO NOT USEOR OPERATE
OUT OFSERVICE
PLACED BY
Name :
Department :
Reason :
Date : Time :
Signature :
Back sideFront sideES-CT 17
This tag MUST
NOT under any
circumstance be used
as a substitute for a
Personal Danger Tag
or an Out of Service Tag
INFORMATION
Placed by :
Department :
Time :
Day : Date:
Equipment :
INFORMATION
Comments :
Back sideFront side
LOTO Lock #................................Device#.......................
LOTO Tag #
CAUTION
NAME :
CONTACT TEL. NO.:
DATE :
DATE :
REASON :
START TIME :
CLOSE TIME :
SIGNATURE :
DO NOTOPERATE
LOTOTRANSITION
Only for use by
LOTO Authorized Individuals
COMMENTS :
OUT OF
SERVICE
ES-CT 20Front side Back side Back sideFront side ES-CT 21
Size : 82.5 X 172.5 mm
Originator:
Date:
Remarks:
DANGER
Originator:
Date:
Remarks:
This tag may only be
removed by the Originator
DANGER
E-SQUARE
ES-CT 01 ES-CT 02 ES-CT 03 ES-CT 04 ES-CT 05 ES-CT 06FRONT SIDE for(ES-CT 01 to 03)
FRONT SIDE for(ES-CT 04 to 06)
e-mail : [email protected] www.safetylock.net
NECESSARY DISCIPLINARY ACTION
WILL BE TAKEN IF THESE ORDERS
ARE DISREGARDED
THIS TAG MUST NOT BEREMOVED AT ANY TIMEEXCEPT THE PERSON
WHO'S NAME IS WRITTENAT THE BACK.
SEE OTHER SIDE2010 E-SQUARE Alliance (P) Ltd., Delhi
MY LIFE IS ON
THE LINE
DOOPERATE
NOT
NAME:
DATE:
FRONT BACK
e-mail : [email protected] www.safetylock.net
EQUIPMENT LOCKED OUT
BYNAME:
DEPT.:
DATE:
TIME:
A LIFE IS ON THE LINE
DONOT
OPERATE
DO NOT REMOVE THIS TAGSEE REVERSE SIDE
E-SQUARE Alliance (P) Ltd., Delhi
INSPECTED
TOUSE
READY
NAME :
DEPARTMENT :
DATE :
YOUR LOGO
TOBE
INSPECTEDNAME :
DEPARTMENT :
DATE :
NOTICEYOUR LOGO
NAME :
DEPARTMENT :
DATE :
CAUTION
UNSAFEDO NOT
USE
YOUR LOGO
NAME :
DEPARTMENT :
DATE :
CAUTION
DO NOTOPERATE
YOUR LOGO
CAUTION
OUT OFSERVICE
NAME :
DEPARTMENT :
DATE :
YOUR LOGO
Other Tags
ES-CT 24Front side Back side
February
March
April
May
June
July
August
September
October
November
December
January
SignatureInspectionDate
MonthsRefilled
on
FIRE EXTINGUISHER INSPECTION TAG
TYPE OF FIRE EXTINGUISHER
e-mail : [email protected] www.safetylock.net
FIRE EXTINGUISHER
Maintenance Record
E-SQUARE
YOURLOGO
DO NOTOPERATE
DANGER
MAINTENANCEDEPARTMENT
NAME :
DEPARTMENT :
DATE :
THIS MACHINE
MUST NOT
BE OPERATED
DANGER
NAME :
DEPARTMENT :
DATE :
UNSAFEDO NOT
USE
DANGER
NAME :
DEPARTMENT :
DATE :
DANGER
MY LIFE ISON THE LINE
Name:
Dept.
Date :
DO NOT REMOVETHIS TAG
DANGER
TO REMOVE THIS TAG WITHOUTAUTHORITY WILL RENDER YOU LIABLETO SEVERE DISCIPLINARY MEASURES.
NOTES :
SEE OTHER SIDE
COMMON BACK SIDEFOR (ES-CT 07 to 12)
ES-CT 13
ES-CT 14 ES-CT 15 ES-CT 16
TEHLİKE
İSMİ:
BÖLÜM :
DOKUNMA
KİLİTLEMEYİ
YAPAN KİŞİNİN
TARİH:
NOT :
DO NOT
OPERATE
E-SQUARE Alliance (P) Ltd., Delhi
F2 O&M COMPANY
إحتياطات أمـــانإجراءات إعادة اإلمداد بالطاقة
قيـــــد التطبيــــق
PROCEDUREAPPLIES
R.O.S.
ES-CT 19
DANGER
WARNING
CAUTION
NOTICE
INSPECTED
INFORMATION
PROHIBITION
ECONOMY TAGS
Nestle India Ltd., Moga
E-SQUARE Alliance (P) Ltd., Delhi
DONOT
OPERATE
fJ; ~Bk ubkT[
CUSTOMIZATION ACCEPTED
* CONDITIONS APPLY
ES-CT 22
ES-CT 23
E-mail : [email protected] Website : www.safete.co.za Help line no.: (+27) 11 455 1552Safety Technologies
Safety Engineering
33E-SQUARE
LOCKOUT TAGS / TAG HOLDER / STATION
LO
CK
OU
T T
AG
S / T
AG
HO
LD
ER
/ S
TA
TIO
N
DISPOSABLE LOCKOUT TAGS
PHOTO ID LOCKOUT TAGS
MODEL PRODUCT DESCRIPTION
DISPOSABLE LOCKOUT TAGSES - DL TAGS
MODEL PRODUCT DESCRIPTION
PHOTO ID LOCKOUT TAGS - YELLOWES - PI TAGS
These disposable lockout tags measure
143 mm x 80 mm and are manufactured
from hard paper. Ideal for indoor or outdoor
isolations. Printed on both sides, each tag
carries a standard "Danger this equipment
has been locked out, Do not operate"
message with a choice of 7 different reverse
messages or blanks to suit various
applications. Supplied in packs of 100 with
ties.
Clearly identifies who is in charge of the lockout procedures. Self-laminating tags allow employees to f i l l in vital information, add a passport sized personal photo and seal it under the attached clear self-adhesive overlay. Will resist chemicals, abrasion, grease and solvents. Supplied in packs of 10 complete with cable ties.
MAGNETIC SIGNS
MODEL PRODUCT DESCRIPTION
MAGNETIC CAUTION SIGNS (Pack of 10)ES - MCS
Magnetic signs, 200 mm x 100 mm are ideal for quick and easy attachment next to lockout points giving a clear caution message that equipment has been locked out.
Customized Signs can be made as per your requirement.
REINFORCED TAGS
TAG HOLDER / STATION
These 0.7 mm PVC tags measure 100 mm x 75 mm gives a clear caution message. Ideal for use through lock shackles, they have a reinforced brass eyelet preventing the tag from tearing.
Customized Tags can be made as per your requirement.
MODEL PRODUCT DESCRIPTION
REINFORCED CAUTION TAGS (Pack of 10)ES - RCT
PERSONALISED TAGS
MODEL PRODUCT DESCRIPTION
PERSONALISED TAGSES - PD TAGS
These personalised laminated ID tags are printed both sides with our standard notice. Your employee name and photograph are added which clearly shows who is working on the isolated equipment.
Keep your lockout / tagout tags clean and organized with
our Tag Holder / Station. Store your tags right where they
are needed.
ES - TH 20 is designed to hold 20 Nos. Tags. Tag holder
comes with screws & sleeves for mounting.
ES - T H 20
MODEL PRODUCT DESCRIPTION
LOCKOUT TAGS STATIONES - TS
LOCKOUT TAGS HOLDER - 20 Nos.ES - TH 20ES - T S
Date:
Name:
Remarks:
Date:
Name:
Remarks:
Date:
Name:
Remarks:
DANGERThis equipment
has been locked out
Do notoperate
Date:
Name:
Remarks:
Lock out devices to beremoved by authorised
personnel only
CAUTION
Date:
Name:
Remarks:
Do not operate
Date:
Name:
Remarks:
Do notswitch on under
maintenance
Date:
Name:
Remarks:
Lock outtransition in
progress
CAUTION
Equipmentlocked out by
DANGER
Date:
Name:
Comments:
Pleaseplacephotohere
This tag & lock to beremoved only by
DANGER
Date:
Name:
Comments:
Pleaseplacephotohere
Do not operateequipment locked out
DANGER
Date:
Name:
Comments:
Pleaseplacephotohere
ES - DL TAGS 1 ES - DL TAGS 2 ES - DL TAGS 3
ES - DL TAGS 4 ES - DL TAGS 5 ES - DL TAGS 6 ES - DL TAGS 7
COMMON FRONT SIDEFOR (ES - DL TAGS 1 to 7)
Do not operateMy life is on the line
DANGER
Date:
Name:
Comments:
Pleaseplacephotohere
ES - PI TAGS 1 ES - PI TAGS 2 ES - PI TAGS 3 ES - PI TAGS 4
ES - MCS ES - RCT
ES - PD TAGS
Customized Tags can be made as per your requirement. Min. order 1000 Nos.
Front Back
CUSTOMIZATION ACCEPTED
* CONDITIONS APPLY
CUSTOMIZATION ACCEPTED
* CONDITIONS APPLY
CUSTOMIZATION ACCEPTED
* CONDITIONS APPLY
ES - TS designed to hold maximum size of 143 mm x 80
mm tag, our tag station has 8 clear acrylic pockets for
holding tags.
E-mail : [email protected] Website : www.safete.co.za Help line no.: (+27) 11 455 1552Safety Technologies
Safety Engineering
LARGE LOCKOUT WALL SIGNS
SAFETY LOCKOUT LABELS
HANGING LOCKOUT SIGNS
MODEL PRODUCT DESCRIPTION
LARGE LOCKOUT WALL SIGNSES - LWS
MODEL PRODUCT DESCRIPTION
HANGING LOCKOUT SIGNSES - HLS
These large safety lockout wall signs can be supplied in either self adhesive vinyl or semi-rigid PVC, and act as a constant reminder to lockout before commencing service or maintenance. Size : 600 mm x 450 mm
Use the nylon cord to hang these signs from machinery during lockout procedures. Material: 1mm / 3 mm PVC.
soft
HA
NG
ING
/ S
ELF A
DH
ES
IVE
SIG
NS
/ L
AB
ELS
34
HANGING / SELF ADHESIVE SIGNS / LABELS
E-SQUARE
Caution
This machinemust be lockedout before work
is carried out
Lock outequipment
available from
Lockout and isolatefrom the electrical
supply before workingon this equipment
Lock out devicesmust be used on this
equipment duringmaintenance work
Lock out equipment is available from
Safety first !Lock it out
Do not start thisequipment when
locked out
Lockoutvalves before
maintenance work
DangerLock out devices to
be removed by authorised personnel only
Do not touchvalves when locked out
DangerThese pipes
contain dangeroussubstances
Use protectiveequipments when
maintainingpipelines
Danger
Lock itout
Lock outhere
Lock out devices must be used on this
equipment during maintenance
Do not touchthis valve when
locked outDo not use !
Removeall doubt
Lock it out !
Disconnecting does not remove all power
from this panel
Lock out herebefore working
on this equipment
Lockout electricalswitches before
working on equipment
Safety first !Lock it out
Lockout point
LOCKOUT SIGNS
Keep your workers and visitors safe in your facility with Lockout Signs. Identify
energy control points that require lockout and send a clear warning that will help
keep workers aware of any potential hazards near equipment, machinery and
electricity. Lockout Signs are not only a great way to keep your workplace safe,
but a great means of keeping productivity up through the visual identification of
lockout areas. Lockout Signs are available in a wide range with Caution and
Warning formats, sign sizes and styles also differ from each other - more than
200 signs to choose from..
Contact us for more signs in Different Sizes / Languages / Material ( Rigid /
Flexible / Self stick / Photoluminesent / reflective etc. ).
LOCK OUT FORSAFETY
SHORTCUTSCAUSE ACCIDENTS
E-SQUARE
DO NOT REMOVE THIS TAGSEE REVERSE SIDE2009 E-SQUARE Alliance (P) Ltd., Delhi
DONOT
OPERATE
DANGER
DID YOU REMEMBERTO
REMOVEYOUR
LOCKS ANDTAGS ?
e-mail : [email protected] E-SQUARE
TAKE THE TIMETO LOCK IT OUT !
SAFETYLASTS
A LIFETIMEDO NOT REMOVE THIS TAG
SEE REVERSE SIDE
DONOT
OPERATE
DANGER
e-mail : [email protected] E-SQUARE
REMEMBERBEFORE WORKING ON EQUIPMENT
LOCK OUTALL
POWER SOURCES e-mail : [email protected] E-SQUARE
CAUTIONLOCK-OUT FOR
SAFETYBEFORE
YOUSTART
E-SQUARE
e-mail : [email protected] E-SQUARE
LOCK ITOUT !
A LIFE IS ON THE LINE e-mail : [email protected] E-SQUARE
NOTICE
ES-LS-01 ES-LS-02 ES-LS-03 ES-LS-04 ES-LS-05 ES-LS-06
LOCK–OUTALL MACHINERY
PRIOR TO SERVICINGFAILURE TO COMPLY
WILL RESULTIN DISCIPLINARY ACTION
E-SQUARE
WARNING
e-mail : [email protected] E-SQUARE
Do not tamper with
lockout devicesE-SQUARE e-mail : [email protected] E-SQUARE e-mail : [email protected]
Lockout electricalswitches before
working on equipment
ES-LS-07 ES-LS-08 ES-LS-09
Lock out devicesmust be used
on this equipmentduring maintenance
E-SQUARE e-mail : [email protected] E-SQUARE e-mail : [email protected]
Ensure all powersources are isolated
and locked out beforeworking on machinery
Lockout Supervisoris
E-SQUARE e-mail : [email protected]
ES-LS-10 ES-LS-11 ES-LS-12Lockout Safety Signs ( mention code no. here )
MODEL
ES-LS
PRODUCT DESCRIPTION
ES - LWS 1 ES - LWS 2 ES - LWS 3 ES - LWS 5 ES - LWS 6 ES - LWS 7
ES - LWS 8 ES - LWS 9 ES - LWS 10 ES - LWS 11 ES - LWS 12
ES - S LABEL 1 ES - S LABEL 2 ES - S LABEL 3 ES - S LABEL 4 ES - S LABEL 5 ES - S LABEL 6
ES - S LABEL 7 ES - S LABEL 8 ES - S LABEL 9
MODEL PRODUCT DESCRIPTION
SAFETY LOCKOUT LABELES - S LABEL
This range of labels is
ideal for use on electrical
equipment where a safety
message needs to be
conveyed. Manufactured
from self adhesive vinyl.
Sold in packs of 10. Size :
55 mm x 75 mm
Ensure all powersources are isolated
and locked out beforeworking on machinery
CautionLock out devices to
be removed by authorised personnel only
WarningThe power supply has
been locked offfor your protection
ES - S LABEL 10 ES - S LABEL 11 ES - S LABEL 12
Caution Do notstart
Do not startor touch
CautionOut of order
Danger Do notswitch on
Do not touchMen working
Do notuse
Out oforder
DangerLive test in progress
DangerMaintenance in progress
ES - HLS 1
ES - HLS 2
ES - HLS 3 ES - HLS 4
ES - HLS 5 ES - HLS 6
ES - HLS 7
ES - HLS 8
Do not use
CautionMan working on Equipment
ES - LWS 4
ASK FOR DETAILS AT [email protected]
450 mm x 600 mm
150 mm x 225 mm
200 mm x 150 mm
CUSTOMIZATION ACCEPTED
* CONDITIONS APPLY
CUSTOMIZATION ACCEPTED
* CONDITIONS APPLY
CUSTOMIZATION ACCEPTED
* CONDITIONS APPLY
E-mail : [email protected] Website : www.safete.co.za Help line no.: (+27) 11 455 1552Safety Technologies
Safety Engineering
E-SQUARE
LOCKOUT ACCESSORIES
LO
CK
OU
T A
CC
ES
SO
RIE
S
35
STEERING WHEEL COVERS
! Available in 3 sizes, 40 cm, 50 cm or 60 cm diameter to fit a wide range of vehicles.
! Bilingual warning message notifies employees not to move or start the vehicle.
! Provides a visual deterrent when carrying out vehicle maintenance or whilst
loading goods to prevent drive-aways.
! Brass reinforced padlock hole can be locked with a padlock or lockout hasp.
SCAFFOLDING TAG
The scaffold must be inspected prior to being used for the first time, following exposure to
weather conditions likely to have affected its strength or stability, after substantial
addition, dismantling or other alteration and at intervals not exceeding 7 days from the
date of last inspection.
! This specially designed holder and insert system ensures that all the concerned
people are well aware of the current status of the structure. A scaffold should be fitted at
all ladder access points from the first build stage and is to remain on the structure until
dismantled thereby communicating a safety message to all.
! By adopting the scaffold, you are demonstrating your duty of care to your workers and
that you have done everything reasonably practical to ensure safe access and egress
from the place of work as well as giving them as much information required to work
safely.
! Economy Scaffolding Tags are made on 0.7 mm white milky imported sheets. As per
the site requirements.
MODEL PRODUCT DESCRIPTION
YELLOW TAG HOLDER ( Set of 10 )ES - Y T H
ES - Y T H - T Y T H TAGS ( Set of 10 )
ES - Y T H - 4
ES - Y T H - 2 ES - Y T H - 3
FIXING CONFIGURATION:
PERSON(S) RESPONSIBLE FOR DAILY INSPECTION
HOARDING TAG
INSPECTION RECORD
LOCATION :
ERECTED BY:
SIGNED:
INITIAL ERECTION INSPECTION DATE :
TYPE OF HOARDING INTERNAL EXTERNAL
FOR ON-GOING INSPECTION DETAILS,
SEE REVERSE SIDE
HAZARDS:
NO UNAUTHORISED ALTERNATIONS OR FIXINGS
MUST BE UNDERTAKEN TO THIS HOARDING WITHOUT
THE EXPRESS PERMISSION OF
WARNINGUNLAWFUL REMOVAL OR INTERFERENCE WITH THIS SIGN
COULD MAKE YOU LIABLE TO PROSECUTION AND FINESON-GOING INSPECTION DETAILS
DATESHIFT
SIGNED
DATESHIFT
SIGNED
HOARDING TAG
REF.NO.:
WARNING
UNLAWFUL REMOVAL OR
INTERFERENCE WITH THIS SIGN
COULD MAKE YOU LIABLE TO
PROSECUTION AND FINES
ES - Y T H - 5
ENTRY TAG
DO NOT
USE
REF.NO.:
ENTRY TAG
ACCESS FORBIDDEN
TO ALL
UNAUTHORISED PERSONS
HOLE IN FLOOR
EXCAVATIONS
WORK OVERHEAD
FALLING OBJECTS
DEFECTIVE
EQUIPMENT
DANGER
THE FOLLOWING
HAZARDS EXIST WITHIN
THESE BARRIERS
HOT WATER/
STEAM OIL
GAS/FUME/
HAZARDOUS
SUBSTANCE
OTHER
RESPONSIBLE FOR AREA SIGNED DATE
UNLAWFUL REMOVAL OR INTERFERENCE WITH THIS SIGN
COULD MAKE YOU LIABLE TO PROSECUTION AND FINES
WARNINGDAILY INSPECTIONS
WEEKLY EXAMINATIONS
DATESIGNATURE
SIGNATURE
DATE
DAILY CHECKLIST
EQUIPMENT MUST ONLY BE STARTED BY
AUTHORISED PERSONNEL THE IGNITION
KEY/STARTER DEVICE MUST BE REMOVED
BY THE DRIVER WHEN UNATTENDED.
TYPE CONDITION / PRESSURE
WHEEL NUTS
HYDRAULIC OIL LEVEL / HYDRAULIC HOSES
LIGHT AND HORN
HAND & SERVICE BRAKE
STEERING
CHECK INSTRUMENTS FOR CORRECT OPERATION
FLT BODY AND SEAT
REPORT OIL LEAKS OR UNUSUAL NOISES
NOISE - EXHAUST
HOIST, TILT REACH AND ATTACHMENT
OPERATION FORKS, MAST AND HOIST CHAIN
REPORT ANY WEAR OR DAMAGE TO SUPERVISOR
THE SEAT BELT / RESTRAINING SYSTEM MUST BE
WORN AT ALL TIMES WHEN THE FORKLIFT IS IN
OPERATION.
FORKLIFT TRUCKS - GENERAL CHECK
FUELSSEAT SWITCH &
EMERGENCY STOP
BATTERY CELLS
TERMINALS
BATTERY CHARGE
CONDITIONS
FUELS / FUEL PIPE
DAMAGE
FUEL PIPE KINKED/
TRAPPED
ENGINE OIL LEVEL
/ WATER LEVEL
ENGINE OIL
LEVEL
WATER LEVEL
ELECTRIC REACH TRUCKS DIESEL TRUCKS GAS TRUCKS
DAILY CHECKLIST DETAILSFORKLIFT TRUCK-NUMBER:
DATESIGNED
DATESIGNED
IF CHECK FAILS TAKE THIS CARD TO YOUR SUPERVISOR
FORKLIFT TAG
REF.NO.:
DO NOT USE UNTIL DAILY
CHECK HAS BEEN CARRIED
OUT SATISFACTORY OR
FORKLIFT TRUCK REPAIRED
MACHINE TAG
DO NOT
USE
REF.NO.:
CAUTIONDO NOTUSE THISMACHINESETTING
IN
PROGRESS
The Power Presses Regulations 1965
Signature of appointedor authorised person Date and time of inspection and test Date:
Time
NOTE: any defect must be immediately reported to:
CERTIFICATE OF INSPECTION AND TEST DETAILS OF POWER PRESS:
DETAILS OF SAFETY DEVICE(S): I hereby certify that every safety device indicated above is on the
Power press to which this certificate relates and is in efficient
Working order.
Do NotUse
The Scaffold
E-SQUARE
UNLAWFUL REMOVAL OR INTERFERENCEWITH THIS SIGN COULD MAKE YOU LIABLE
TO PROSECUTION AND FINES
WARNING
DATE TIME SIGNED
LADDER N RUNGS:
N OF STANDARDS:
N OF LIFTS:
M BOARDING:
STRUCTURE DECOMMISSIONED
DATE:
2
COMPETENT PERSON
Front Back
TAG FOR SCAFFOLD
TO BE COMPLETED BY SUPERVISOR
LOCATION:
REF. NO.:
REQUESTED BY:
BUILT BY:
DATE:
SIGNATURE:
LIGHT DUTY
1.50 kN/m 150 Kg/m2 2
GENERAL PURPOSE
2.00 kN/m 200 Kg/m2 2
HEAVY DUTY
2.50 kN/m 250 Kg/m2 2
2
SPECIAL
PURPOSE kN/m Kg/m 2
TO BE COMPLETED BY INSPECTORBEFORE BEING TAKEN INTO USE FOR
THE FIRST TIME
DATE & TIME:
ERECTION AND INSPECTION RECORD
INSPECTORS NAME & SIGNATURE:
STRUCTURE TO BE USED FOR
THE FOLLOWING HAZARDSSHOULD BE NOTED
CAUTION
ES - SCF - TH
ES - SCF - T
MODEL PRODUCT DESCRIPTION
STEERING WHEEL COVER - 40 cm.
STEERING WHEEL COVER - 50 cm.
STEERING WHEEL COVER - 60 cm.
ES - SWC 40
ES - SWC 50
ES - SWC 60
ES - SWC 60
MODEL PRODUCT DESCRIPTION
SCAFFOLDING TAG HOLDER ( Set of 10 )
SCAFFOLDING TAGS ( Set of 10 )
ES - SCF - TH
ES - SCF - T
ES - SCF - ET SCAFFOLDING ECONOMY TAGS ( Set of 10 )
ES - SCF - ET 1
Front SideBack Side
OTHER REQUIREMENTS
B/AAIRLINE
PROTECTIVECLOTHING
B/ASELF CONT'D
SAFETY HELMET
SAFETYHARNESS
SAFETYGOGGLES
SAFETYLINE
SAFETYFOOTWEAR
DETAILS OF PERMITTED WORK
ACCESSONLY
ENTRY TAGINSPECTION RECORD
FOR ON-GOING INSPECTION DETAILS,SEE REVERSE SIDE
COLDWORK
HOTWORK
LOCATION.
PERMIT NO.
INITIAL TEST DATE
INITIAL TEST READING
TESTED BY
REQUESTED BY
PERSON IN CHARGE
SAFETY EQUIPMENT REQUIRED
WARNINGUNLAWFUL REMOVAL OR INTERFERENCE WITH THIS SIGN
COULD MAKE YOU LIABLE TO PROSECUTION AND FINES
ON-GOING INSPECTION DETAILSDATESHIFT
SIGNED
DATESHIFT
SIGNED
ENTRY TAG
DO NOTUSE
REF.NO.:
ES - Y T H - 1
ES - Y T H - T 1
ES - Y T H - T 2ES - Y T H - T 3
ES - Y T H - T 4ES - Y T H - T 5
ES - SWC 50ES - SWC 40
The Yellow Tag Holders are specially designed as per the
requirements of the site / process /machines etc. and can be
ordered in multiple of 100's.
YELLOW TAG HOLDER
SCAFFOLD
INCOMPLETE
DO NOT
USE
PERMIT NO.:
TAG FOR SCAFFOLD
THINK SAFETY
ERECTED BY
ON / DATE
SIGNATURE
PERMIT NO.
LOADING SYSTEM
LIGHT DUTY (150 KG/M2)
MEDIUM DUTY (300 KG/M2)
HEAVY DUTY (600 KG/M2)
SEE ENGINEERING DRAWING
CHECK ONE
SCAFFOLD
RELEASED
FOR ACCESS
ES - SCF - ET 2
ES - SCF - ET 3
SCAFFOLDING TAG E-SQUARE
DANGER
DO NOT
USE
SCAFFOLD
LFkku
rkjh[k
fujh{kd ds gLrk{
kj
mi;ksx ds fy;s
HkkM+k
lqjf{kr gS
A D I T Y A B I R L A G R O U P
GREEN
SCAFFOLDING TAG UNIT : ARAKKONAM CEMENT WORKS RED
SCAFFOLDING TAG
A D I T Y A B I R L A G R O U P
HkkM+k
fuekZ.kk/khu gS
bldk mi;ksx
uk djsa
UNIT : ARAKKONAM CEMENT WORKS
CUSTOMIZATION ACCEPTED
* CONDITIONS APPLY
ES - SCF - ET 4 ES - SCF - ET 5
CUSTOMIZATION ACCEPTED
* CONDITIONS APPLY
E-mail : [email protected] Website : www.safete.co.za Help line no.: (+27) 11 455 1552Safety Technologies
Safety Engineering