Download - Safety around the Heating System
11
2
34
5 6
8 9
10
7
14
Event Reporting System EMS
Thermistor probe pipe cap
Vent cap
Contents Gauge ‘TankControl’
Oil/water alarm
Gas and smoke detector GRM
Direct mounting contents gauge MT-Profile
Thermistor type high level probe
1
2
3
4
5
6
7
8
9
10
11
Fuel withdrawal unit
Anti-siphon valve MAV
Pull cord
Automatic oil de-aerator FloCo-TOP series
Oil drip pan
Tank room lining
Boiler safety group assembly KSG
Vessel connection combination fitting GAK
12
13
14
15
16
Afrisoproductsinaheatingsystem
AFRISO offer a wide range of safety products designed for heating systems, regardless if the system is fuelled by regenerative or fossil fuels.Heating oil storage: Anti-siphon valves, fuel withdraw-al units, level switches, leak detection instruments, fuel tank linings and overfill prevention systems ensure the highest safety standards.Heating installations: Boiler safety group fittings, solar pump units, vessel connection combination fittings, cap valves, boiler safety group assemblies, diaphragm type safety valves, control thermostats, thermal drives and low level boiler water controls.
Additionally, AFRISO offer a large selection of hand-held measuring instruments to complement this com-prehensive product range. From simple pressure, temperature, humidity, vacuum and thermistor probe test instruments through to pressure test and gas detection instruments up to state-of-the-art flue gas analysis measuring instruments. All of these support the profes- sional Engineers in their maintenance tasks.
Protecting the heating system: Quality products from AFRISO
11
12
13
15
16 17
18
19
20
21
22
23
24
25
26
27
2829
Rinse and filling unit
Solar pump group PrimoSol®
Distribution manifold for underfloor heating
Room thermostat
Control thermostat
Air separator for solar system
24
25
26
27
28
29
Boiler low water level control WMS-WP6
Pump with overflow valve
Flow filter
Boiler room air vent Air-Control
Solar control unit
Chimney draught regulator WZB-1
Boiler safety group fittings
17
18
19
20
21
22
23
Products for safe oil storage and professional equipment for heating systems
Tank contents gauges Unimes and MT-Profil
Universal mechanical tank con-tents gauges• Measuring range adjustable• UNIMES has option for Litre scales for standard size and special tanks
• Direct push-on or with female / male thread
• Metal or plastic versions
For standard heating oil EL, diesel, biodiesel or low sulphur heating oil EL• Bayonet fitting G2
(DIN EN 14420-6)• Integrated thermistor probe
connector• oil and weather resistant cap
Combination fitting for withdrawal of heating oil. Complete with fast action shut-off valve, suction and measuring line as well as connec-tion for oil return line.• Flexible suction and
measuring line• Plastic or brass version• Optional floating withdrawal unit
or model with integrated heating
For internally installed tanks (battery and rectangular tanks) in storage rooms.• Variable height adjustment• Complete with connection
cable• Various models: With or with-
out fitting, with MT-Profile gauge, and similar
7
Filler pipe caps GWG2
Vent caps3
Thermistor type high level probe GWG2
Fuel withdrawal units Euroflex and Miniflex9
Products for safe oil storage and professional equipment for heating systems
• Dual scale for rectangular and cylindrical tanks
• Consumption control and date indication
• Remote indication up to 50 m• Zero correction facility• Available for use with heating oil,
diesel, water and AdBlue®
For tank contents measurement and control of minimum levels or level differences in interconnected tanks.• Graphic display of consumption
rate and forward projection• Remote indication up to 20 m• For heating oil EL, L., diesel,
biodiesel (TankControl 02), water
For oil carrying pipes. Prevents the escape of heating oil from a leaking suction line.• Height difference fully adjust-
able up to max. 4 m• No increase in the vacuum of
the oil burner pump
Warns of liquid accumulations resulting from tank leaks, back flow or flooding.• Visual and audible alarms;
with mute button• Relay output for additional
external alarm• Self-checking probe• Application fields: Tank storage
rooms, manholes, drip pans, double-skinned tanks
For remote monitoring of buildings via SMS or AFRISO Net in conjunction with WATCHDOG alarm instruments.• Monitoring and management of
heating oil tanks, boiler and techni-cal equipment rooms
• Control of manholes, drip collection pans or pipe runs
For the continuous control and warning of explosive gases or smoke developments.• Visual and audible alarms,
with mute button• Application fields: Boiler rooms,
cellars, storage, office or living rooms
Tank contents gauge TankControl4
Gas and smoke alarm GRM6 Oil/water alarm OWWG35
Event reporting systems EMS1
For remote operation of quick action shut-off valve.• With hand pull and
lead-seal box• Including installation
accessories
Pull cord11
With integrated filter and stop cock for use in single line feed systems with oil return line.• Safety system prevents the
escape of oil foam• Optimum adaptation to any
application using a different housing, filter or vacuum gauge
Automatic heating oil de-aerator FloCo-TOP series12
Pneumatic tank contents gauge Unitop
Anti-siphon valve MAV-Universal10
For tanks and containers
Products for safe oil storage and professional equipment for heating systems
For connection of diaphragm expansion vessels up to 50 Litres.• Installation advantage through
pre-assembled and for tight-ness tested assembly with integrated cap valve
• Service friendly: Pressure gauge, air vent and ex- pansion vessel can be exchanged without emptying the system
• Inclusive of form fitted insulation
Available as a mechanical or electronic unit to safe-guard boiler heating when water level drops to low level.
For the control of feed or return line tempera-tures.
For clean water and trouble-free operation of heating systems, underfloor heating, combustion cells, drinking water installations.• Filters out of calcium, rust, mud,
dirt and gases• Reliable operating principle
without filter sieve• Rinsing possible during normal
system operation
For safeguarding closed water heaters against overpressure.• Combination fitting with
safety valve, stop cock and test screw
• Optional pressure gauge
Safety valves for closed heating systems, mains water heaters and solar installations.
Complete with pressure gauge, air vent and safety valve as a pre-assembled unit. For closed heat-ing systems to DIN EN 12828.• Available in four different
versions• For boilers with a capacity
up to 100 kW • Inclusive of form fitted insulation
Burner controlled device, suitable for fitting into cellar windows or ventilation ducts to provide oxy-gen for boiler rooms using oil or gas fired appliances up to 50 kW.• No cooling down of system
or boiler room• Sturdy, impact resistant plastic• Complete with accessories for
easy installation
Boiler safety group assembly KSG15 Boiler low water level control WMS17
Vessel connection combination fitting GAK16 Boiler room air vent Air-Control20
Housing thermostats or surface mount thermostats Flow filter/Air flow filter19
Boiler safety group fittings23 Diaphragm type safety valves
Mounting to heating pipe/hot water tank
For installation between collector and tank in intrinsically safe, closed ther-mal solar systems.• Pre-assembled and for tightness
tested, insulated assembly• Many versions: Filling and rinsing
unit, flow meter with ball cock or vent pot
For manual or automatic control of thermal solar systems.• Digital indication for
temperature setting• Up to three temperature probes
can be connected• Optional: Cooling down function
to protect against overheating of the solar circuit
Distribution manifold for underfloor heating
From plastic, available with ther-mometer, Thermal drive unit, flow meter and controls.• For heating or cooling• Individually selectable for type
and number of heating circuits• Special version for Geothermal
For regulating the room tempera-ture, choice of: Control lamp, ON/OFF switch or summer/winter selector switch
To safeguard water heaters from corro-sion damage. Visual inspection of anode state possible from the outside.
Solar pump groups PrimoSol®25
Solar controller SR21
Signal anode
Room thermostat Colibri27
26
For water tank
• Solar air-vent, air separator and more
Accessories
Iden
t-N
r. 99
1517
066
30 0
4/09
AFRISO, founded in 1869 by Adalbert Fritz in Schmiedefeld, Germany, is an innovative, medium sized family controlled company with some 900 employees world-wide – 475 of which work in our four German factory locations.
Traditionally, we manufacture measurement and control instruments for temperature and pressure. For more than 50 years we have also manufactured measurement, control and monitoring instruments for environmental protection.
•Levelindicators•Overfillpreventiondevices•Leakdetectors•Fluegasanalysisinstruments
AFRISO-EURO-INDEX – The company
AFRISO-EURO-INDEX GmbH • Lindenstrasse 20 • 74363 Gueglingen • Germany • phone +49 (0) 71 35/1 02-0 • fax +49 (0) 71 35/1 02-1 47 • [email protected] • www.afriso.de
The complete product range:Measurement, control and monitoring instruments for housing technology, industry and environmental protection.
Please contact us at: www.afriso.de/catalogue and request our comprehensive catalogue for complete and detailed product information.
The ever growing knowledge of our highly moti-vated and qualified staff, combined with the close customer contact of our sales advisors leads us permanently to new product designs which reflect the latest market requirements.
Our product ranges spans from economically priced, well proven standard products to high quality purpose especially designed one-offs to provide customer-specific solutions.• Research and Development• Tool making and assembly fixture design • Multi-shift and highly rationalised production• Highest quality levels• National and international approvals
...makeAFRISOdesignstocustomerandmarketapprovedbrandproducts.EnvironmentalmanagementaccordingtoISO14001isanobviousandstandardnormforus.