DESIGNING AND BUILDING A PROJECT
Maybe it is an entire set of Hog Pens?
All Project REQUIRE project planning
DESIGNING AND BUILDING A PROJECT Idea-What is your end Goal
Sketch- Draw it out!
Measurements- Always Need Measurements!
Material list- What is the end product Made of ??
Cutting, drilling, part preparation.
Layout- Drawing it out full size! Marking Cuts, holes to be drilled, ect…
Assembly- Putting it together!!
DESIGNING AND BUILDING A PROJECT
Parts List- What are the Parts to be made or Purchased?
How will it be assembled? Will it be welded, bolted, riveted, glued, or???
How will it be finished? (what will it look like) Painted, Powder-coated, bare-metal finish, oil rubbed, ect…
DESIGNING AND BUILDING A PROJECT
Where do I start? What do I Know
how to do? Don’t fool
yourself into a big project.
Be reasonable! Know the
Limitations
DESIGNING AND BUILDING A PROJECT
What does this Project Cost?? Get Quotes for Materials
Get Quotes for Cost of Parts.
Cost of Consumables? Sandpaper, paint, grinding stones,
Welding Wire, Welding Gas, electricity!!
DESIGNING AND BUILDING A PROJECT
Tools•What will you need for this project.• What do you have Vs. What you Need?
DESIGNING AND BUILDING A PROJECT
Cutting the Material? Band Saw Cold Saw Shear?
Do you need to? Drill Holes Pre-finish the material
(material Prep)
DESIGNING AND BUILDING A PROJECT
How will you assemble this Project? Weld It Bolt it. Rivet it. Glue Duct Tape
DESIGNING AND BUILDING A PROJECT
What about Parts?•Nuts & Bolts•Sand Paper•Grinding disc•Paint/coatings•Hardware
DESIGNING AND BUILDING A PROJECT
Assembly? How will this fit
Together? Welding?
Which process?
Using Nuts & Bolts? What About Rivets? Well what kind of
Rivets
What about all 3 ways?
DESIGNING AND BUILDING A PROJECT
First create an idea book Then take pictures of things you like Or go on the website to get ideas Once you have the idea go and start
with Step #1
STEP #1: DRAWINGS
Make a 3 view drawing and add the measurements to it
Have it checked Make a three view drawing complete
with measurements Have it checked
STEP #2:MAKE A MATERIAL LIST
Using your sketch as a guide you will need to determine what materials you will need for your project. List those small
needs or Ideas?
Step #3: Tools and Equipment What are the
tools that Are needed
What equipment do you need to complete this project.
Step#4: Process steps
Develop a set of steps that must be followed to complete the project. What Must be done (in order?) Be detailed. Think through what
needs to be done Don’t assume. Not every one
knows how everything is performed.
Details, Details, Details.
STEP #5: LAYOUT AND CUTTING Obtain the Raw
materials Cut them to correct
sizes Layout and identify the
pieces Assemble them (pre-
fit) Have it checked Disassemble Do finish work
(sanding, grinding, also called Material Prep)
STEP #7: FINISHING Assemble the
Project How is the Project
Finished Grinding Buffing Painting Sanding Polishing
DESIGNING AND BUILDING A PROJECT #1- Drawings or
Sketch #2- Material
List/Parts List. #3- Process
Steps #4- Cut the parts
(material prep) - Layout the Parts
#6- Assemble #7- Finish
ASSIGNMENT
We Will Start with #1 (10 points Draw the project: Be as detailed as you can.
Make a Materials List. (10 points) List all of the parts or componants
Make a Part List. (10 points) Equipment/tool list (10 points Process Steps (60 points)
Develop Each Task that a technician Must perform to complete the Project. Put them in sequential order.
Project Requirements
Parts: 2 Slices of Bread (required)
2 Slices of Turkey or Ham (required)
Must use One Condiment Mustard, Mayonnaise, ect..
Project Requirments
The Group will be Graded on How well their project is Put together.
If during the assembly there is a process skipped the project is stopped.
If the group is successful Both will be able to Enjoy.
Project Requirements
Team Work Is Key Think through the entire Project Don’t assume. What are the Detailes? Step By Step Process
Project requirements
This Will be “Manufactured” During Class
Plates are required to be used Napkins will be available Personal Protective Equipment Must
Be used Food Prep Gloves
Project Requirements
Must Include Cleanup Directions. And Most Important- Don’t forget to
include eating the sandwich and duplication of the project if the group is successful.