![Page 1: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/1.jpg)
3
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and measured at the discharge connection of pump tube (without hose barb).
Hand operated pump JP-02 for liquidsas mentioned at JP-03 plus waterbased chemicals and alkaliesHand operated pump JP-03 for oils, diesel, alcohol up to max. 50%, antifreezing liquid, water, etc.Material: PolypropyleneShaft: at JP-02 Stainless Steel 316,at JP-03 tool steelSeals: at JP-02 Viton, at JP-03 NBR/BunaFlow rate: 0,3, 0,37 or 0,45 l/stroke*depending on mounting of hand lever
Telescopic suction tube has a lengthof 340–900 mm, is step-less adjustableand has a tube-Ø of 40 mm. Pump hou-sing with drum adapters G 2”/G 1½”.
JP-02JP-03
JP-04
JP-05
JP-03
JP-02
Order-Nr.
JP-02 6002 0000
Order-Nr.
JP-04 chemicals 6004 0000
JP-03 6003 0000
Hand operated pump JP-04 (yellow)Especially suitable for alkalies and acids
Material: PolypropyleneShaft: also mantled with PP(!)Seals: VitonFlow rate: 0,3 l/stroke*Hose connection: ¾“
Telescopic suction tube has a length of 480–950 mm, is step-less adjustableand has a diameter of max. 34 mm.Pump housing has a drum adapter of G 2” that can be screwed in 200 litermetal drums. For adapters see page 7.
Stainless steel hand pump JP-05Pump tube made of Stainless steel 316Ti (1.4571), all seals made of PTFE
Suitable for flammable media like sol-vents (also for acetone!)
Flow rate: 0,3–0,6 l/stroke*
Length/mm Order-Nr.
JP-05 700 6005 0700
JP-05 1000 6005 1000
Hand pumps
Order-Nr.
Discharge arc 6510with PTFE seal and wing nut made of brass, nickel-pl.
Hose connection 6520made of Stainless steel, ¾", with PTFE seal and wingnut made of brass, nickel-plated
Hose connection 6530made of Stainless steel, 1”, with PTFE seal and wingnut made of brass, nickel-plated
Barrel adapter 6540made of brass, nickel-plated, R 2”, with fixing device
Anti-Static-Set 9003consisting of 4 copper cables with connection clamps (absolute necessary when pumping flammables)
Necessary accessories for hand pump JP-05:
Certified: risk analysis madeby TÜV Munich!
Also an oil version withseals made of NBR/Bunais available (blue colour).
JP-04 oils 6004 0001
![Page 2: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/2.jpg)
4
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and was measured at the discharge connection of pump tube (without hose barb).
Hand pumps
Hand operated pump JP-11High volume rotary pump
Material:Aluminium and zinc-plated steelSeals made of NBR/BunaPump is suitable for thin-fluid, non flamma-ble media like diesel, machine oils, mineraloils, etc.
Flow rate:1 l/rotation*; changing from forward to reverse transferring is any time possible. Thereby results an optimal dosing.
Head: 15 m*Horizontal distance: 50 m*
Pump with discharge hose and drum adap-ter G 2”
Hand operated pump JP-12High volume rotary pump
Material:Aluminium and zinc-plated steelSeals made of NBR/BunaPump is suitable for thin-fluid, non flamma-ble media like diesel, machine oils, mineraloils, etc.
Flow rate:1 l/rotation*; changing from forward to reverse transferring is any time possible.Thereby results an optimal dosing.Head: 15 m*Horizontal distance: 50 m*
Pump with special mineral oil hose, dis-charge arc and drum adapter G 2”
JP-11
JP-12
Hand operated pump JP-07Manual fill and transfer pump
Pump body made of Polypropylene, suit-able for small cans from 20 liters up to 200 liter drums. Three adapters from 46,5 to 60 mm and a suction tube consisting offour pieces will be supplied as accessories.
Flow rate:Water: 20 l/min*Oil SAE 30: 9 l/min at 20 °C*
Temperature: 40 °C*Viscosity: 400 mPas*
Transfer hose (1,5 m) with nozzle 6710(for JP-07 blue)
Transfer hose (1,5 m) with nozzle 6720(for JP-07 red)
Transfer hose (1,5 m) with nozzle 6730(for JP-07 green)
JP-07
Order-Nr.
JP-07 blue 6007 0001Nitrile seals, f.e. for boric acid
JP-07 red 6007 0002EPDM seals, f.e. for hexane
JP-07 green 6007 0003Viton seals, f.e. for hydrochloric acid
Order-Nr.
JP-11 6011 0000
Order-Nr.
JP-12 6012 0000
Accessories for JP-07:
![Page 3: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/3.jpg)
5
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and measured at the discharge connection of pump tube (without hose barb).
Hand pumps
JP-15
JP-13
JP-14
Order-Nr.
JP-15 6015 0000
Order-Nr.
JP-14 6014 0000
Order-Nr.
JP-13 6013 0000
Hand operated pump JP-14Hand lever pump made of metal
Material:Zinc alloySeals made of NBR/Buna
Pump is suitable for thin-fluid, non flamma-ble media like diesel, machine oils, mineraloils, etc.
Flow rate:0,5 l/stroke*For canisters and drums from 30–200 liters
Telescopic suction tube enables an univer-sal use for all sizes of drums.
Drum adapter G 2”
Hand operated pump JP-15Hand lever pump made of metal
Material:Zinc-plated steelSeals made of NBR/Buna
For transferring many thin-fluid, non flam-mable media like diesel, oils, anti freezing liquid, etc.
Flow rate:0,35 l/stroke*For canisters and drums from 30–200 liters
Telescopic suction tube enables an univer-sal use for all sizes of drums.Drum adapters G 1½” und G 2”, pump withdischarge arc. The outrun piece has a malethread in ¾”. Thereby other possibilities forconnections exist.
Hand operated pump JP-13Rotary pump made of metal
Material:Pump housing made of cast ironSeals made of NBR/Buna
Pump is suitable for diesel, heating oil, oils(up to SAE 90) and all other self lubricating,non aggressive and non flammable media.
Flow rate:0,25 l/rotation*Pump tube length 980 mm; therefore suit-able for small canisters and 200 liter drums
Pump with discharge arc and drum adapterG 2“
![Page 4: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/4.jpg)
6
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and measured at the discharge connection of pump tube (without hose barb).
Hand pumps
Hand operated pump JP-16Fire brigade pumpATEX conform, single acting hand pumpthat can be used for following media of danger classes I-III: diesel, heating oil, fuels,petroleum, anti freezing liquid for cooler(undilated), thin-fluid mineral oils and rape-seed methyl ester
Execution for fire brigade with flexible hoseinstead of a rigid suction tubeSuction hose DN 19 x 4; 1,5 mDischarge hose DN 19 x 4; 1,5 m
In pump housing integrated drum adapterswith M 64 x 4 and G 2” enable an easy fixing in a drum.
Flow rate:ca. 0,25 l/stroke*
Order-Nr.
JP-16 6016 0000
JP-16
Stainless steel hand pump JP-17Pump tube made of SS 314 and SS 316 All seals made of PTFE
Suitable for flammable media (exept ace-tone)
Flow rate:0,5 l/stroke*
Pump tube length: 1000 mm
JP-17
Order-Nr.
JP-17 6017 0000
Order-Nr.
Barrel adapter 6540amade of brass, nickel-plated, R 2”, with fixing device
Anti-Static-Set 9003consisting of 4 copper cables with connection clamps(absolute necessary when pumping flammables)
Necessary accessories for hand pump JP-17:
Certified: risk analysis madeby TÜV Munich!
![Page 5: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/5.jpg)
7
Thread adapters made of PE for equalization of different threads atcanisters, drums, containers, etc. when fixing f.e. hand pumps
Nr. Colour Thread 1/thread 2 Order-Nr.
1 Brown T1: 2” BSP fine, female thread* 6001T2: DIN 71, female thread
* 2” BSP (British-Standard-Pipe) is equivalent to a diameter of 58 mm.
Classification (without any obligations):
DIN 71 female thread for containers
Thread DIN 61/31 for 20/30/60 liter plastic canistersand KTC/IBC containers
ASTM Ø 63 mm fem. thr. for special threads
DIN 51 female thread for 5/10 liter plastic canisters
Thread Trisure for special threads at plastic drums
Thread Mauser coarse for 110/220 liter drums made of PE
All JESSBERGER hand pumps have a bung adapter (2” BSP malethread) suitable for metal drums like S 60 or S 200.
Due to the big variety of different canisters, drums, containers, etc.that are available in the market there is often a need to use an ad-apter to fix the pump in the drum securely.
Material of adapter: PE (Polyethylene)This plastic material is resistant to water, many alkalies, acids andsalt solutions. It is only limited chemical resistant to oils, organicsolvents and fuels. In contact with some of these substances (depending on concentration and density) PE tends to swell.
Thread adapters
1 2 3 4 5
6 7 8 9
2 Grey T1: 2” BSP fine, female thread* 6002T2: DIN 61/31, male thread
3 Black T1: 2” BSP fine, male thread* 6003T2: DIN 61/31, male thread
4 Yellow T1: 2” BSP fine, female thread* 6004T2: DIN 61/31, female thread
5 White T1: 2” BSP fine, female thread* 6005T2: ASTM Ø 63 mm, female thr.
6 Red T1: 2” Mauser coarse, fem. thr. 6006T2: Trisure coarse, male thread
7 Orange T1: 2” BSP fine, female thread* 6007T2: Trisure coarse, male thread
8 Blue T1: 2” BSP fine, female thread* 6008T2: 2” Mauser coarse, male thr.
9 Green T1: 2” BSP fine, female thread* 6009T2: DIN 51, female thread
10 Set All adapters Nr. 1–9 6010
![Page 6: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/6.jpg)
8
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and was measured at the discharge connection of pump tube (without hose barb).
Laboratory pumpsets
Order-Nr.
Set JP-125 1151 2507
Laboratory pump set JP-125: JP-150 PP (HC) 700, Ø 25 mmUniversal motor JP-150230 V, 50 Hz, 250 W, protection class IP 24,double isolated category II, on/off switch,thermo protection, 5 m cable and plug
Pump tube Polypropylene, 700 mm, Outer-Ø 25 mm, HC-shaft, at discharge side malethread G 1”, hose connection ½”(NW 13)
2 m PVC hose ½” (NW 13)2 Hose clamps Stainless steel1 Nozzle Polyprop ylene ½”1 Wall hanger, painted steel
Flow rate: 20 l/min*, Head: 3 m*Temperature of medium: 50 °C*Viscosity: 200 mPas*, Density: 1,2*
230 V 1~, 50 Hz, 250 W
Order-Nr.
Set JP-128 1151 2810230 V 1~, 50 Hz, 250 W
Order-Nr.
Set JP-132 3012 3210300 W at max. 6 bar operating press.
Laboratory pump set JP-128:JP-150 PP (HC) 1000, Ø 28 mmUniversal motor JP-150230 V, 50 Hz, 250 W, protection class IP 24,double isolated category II, on/off switch,thermo protection, 5 m cable and plug
Pump tube Polypropylene, 1000 mm, Outer-Ø 28 mm, HC-shaft, at discharge side malethread G 1”, hose connection ¾” (NW 19)
2 m PVC hose ¾” (NW 19)2 Hose clamps Stainless steel1 Nozzle Polyprop ylene ¾”1 Wall hanger, painted steel
Flow rate: 30 l/min*, Head: 3 m*Temperature of medium 50 °C*Viscosity: 200 mPas*, Density: 1,2*
Laboratory pump set JP-132:JP-AIR 1 SS 1000, Ø 32 mmPneumatic motor JP-AIR 1300 W at max. 6 bar operating pressureMotor with brass valve and muffler for com-pressed air control. This regulates speed ofthe motor and varies pumping capacity.
EC type examination certificate no.IBEx U05 ATEX B 007 XPump tube Stainless Steel 316 Ti, 1000mm, Outer-Ø 32 mm, at discharge side malethread G 1¼”, hose connection ¾” (NW 19)ATEX certificate for laboratory pump tube inpreparation
2 m Universal chemical hose ¾” (NW 19)2 Hose clamps Stainless steel1 Nozzle brass, nickel-plated ¾”1 Wall hanger, painted steel
Flow rate: 40 l/min*, Head: 5 m*Temperature of medium: 90 °C*Viscosity: 300 mPas*, Density: 1,3*
JP-125
JP-128
JP-132
![Page 7: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/7.jpg)
9
Drum pump set JP-180 PP (HC) 1000Universal motor 230 V, 50 Hz, 600 W, protection class IP 24, double isolated cate-gory II, on/off switch, low voltage release, 5 m cable and plug
Pump tube Polypropylene, seal-less con-struction, 1000 mm, Outer-Ø 41 mm, HC-shaft, at discharge side male thread G 1¼”,hose connection 1” (NW 25)
2 m PVC hose 1” (NW 25)2 Hose clamps Stainless steel1 Nozzle Poly prop ylene1 Wall hanger, painted steel
Flow rate: 150 l/min*Head: 8 m (Rotor), 20 m (Impeller)*Temperature of medium: 50°C*Viscosity: 600 mPas*, Density: 1,5*
Drum pump set JP-200 PP (HC) 1000Universal motor 230 V, 50Hz, 500 W, pro-tection class IP 54, double isolated cate-gory II, on/off switch, low voltage release, 5 m cable and plug
Pump tube Polypropylene, seal-less con-struction, 1000 mm, Outer-Ø 41 mm, HC-shaft, at discharge side male thread G 1¼”,hose connection 1” (NW 25)
2 m PVC hose 1” (NW 25)2 Hose clamps Stainless steel1 Nozzle Polyp rop ylene1 Wall hanger, painted steel
Flow rate: 150 l/min*Head: 8 m (Rotor), 21 m (Impeller)*Temperature of medium: 50°C*Viscosity: 500 mPas*, Density: 1,4*
Drum pump set JP-150 PP (HC) 1000Universal motor 230 V, 50 Hz, 250 W,protection class IP 24, double isolated cate-gory II, on/off switch, thermo protection, 5 m cable and plug
Pump tube Polypropylene, seal-less con-struction, 1000 mm, Outer-Ø 41 mm, HC-shaft, at discharge side male thread G 1¼”,hose connection 1” (NW 25)
2 m PVC Hose 1” (NW 25)2 Hose clamps Stainless steel1 Nozzle Poly prop ylene1 Wall hanger, steel painted
Flow rate: 70 l/min*Head: 5 m (Rotor), 17 m (Impeller)*Temperature of medium: 50 °C*Viscosity: 200 mPas*, Density: 1,2*
IP 24
IP 24
IP 54
JP-150
JP-180
JP-200
Drum pumpssets
Order-Nr.
Set JP-150 1151 4110230 V 1~, 50 Hz, 250 W
Set JP-180 1181 4110230 V 1~, 50 Hz, 600 WSet JP-180 1182 4110115 V 1~, 60 Hz, 600 W
Set JP-200 1201 4110230 V 1~, 50 Hz, 500 WSet JP-200 1202 4110115 V 1~, 60 Hz, 500 W
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and was measured at the discharge connection of pump tube (without hose barb).
![Page 8: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/8.jpg)
10
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and measured at the discharge connection of pump tube (without hose barb).
JP-280
IP 54
JP-400
Drum pumpsets
Drum pump set JP-280 PP (HC) 1000Universal motor 230 V, 50 Hz, 825 W, pro-tection class IP 24, double isolated cate-gory II, on/off switch, low voltage release, 5 m cable and plug
Pump tube Polypropylene, seal-less con-struction, 1000 mm, Outer-Ø 41 mm, at discharge side male connection G 1¼”,hose connection 1” (NW 25)
2 m PVC hose 1” (NW 25)2 Hose clamps Stainless steel1 Nozzle Polypro pylene1 Wall hanger, painted steel
Flow rate: 200 l/min*Head: 13 m (Rotor), 30 m (Impeller)*Temperature of medium: 50 °C*Viscosity: 1000 mPas*, Density: 1,9*
Drum pump set JP-300 PVDF 1000Universal motor 230 V, 50 Hz, 825 W, pro-tection class IP 54, double isolated categoryII, on/off switch, low voltage release, 5 mcable and plug
Pump tube PVDF, seal-less construction,1000 mm, Outer-Ø 41 mm, at discharge sidemale thread G 1¼”, hose conn. 1” (NW 25)2 m Universal chemical hose 1” (NW 25)2 Hose clamps Stainless steel1 Nozzle PVDF1 Wall hanger, painted steel
Flow rate: 200 l/min*Head: 14 m (Rotor), 28 m (Impeller)*Temperature of medium: 90 °C*Viscosity: 800 mPas*, Density: 1,6*
Drum pump set JP-400 SS 1000Ex-Motor, 230 V, 50 Hz, 550 W, IP 54, Ex de IIA T6, on/off switch, overload protectionswitch with low voltagerelease, motor without plug
Pump tube Stainless steel 316 Ti, 1000 mm,Outer-Ø 41 mm, at discharge side malethread G 1¼”, hoseconnection 1” (NW 25)
2 m Solvent hose, conductive 1” (NW 25)2 Hose clamps Stainless steel1 Nozzle brass nickel plated1 Wall hanger, painted steel1 Bonding ground setFlow rate: 100 l/min*Head: 8 m (Rotor), 16 m (Impeller)*Temperature: see Ex-certificateViscosity: 600 mPas*, Density: 1,5*
IP 24
JP-300IP 54
Order-Nr.
Set JP-280 1281 4110230 V 1~, 50 Hz, 825 WSet JP-280 1282 4110115 V 1~, 60 Hz, 825 W
Set JP-300 1303 4110230 V 1~, 50 Hz, 825 WSet JP-300 1304 4110115 V 1~, 60 Hz, 825 W
Set JP-400 1402 4110230 V 1~, 50 Hz, 550 W
![Page 9: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/9.jpg)
11
Drum pump set JP-AIR 1 SS 1000Pneumatic motor JP-AIR 1, 300 W at max.6 bar operating pressure. Motor with brassvalve and muffler for compressed air con-trol. IBEx U05 ATEX B007 XPump tube Stainless Steel 316 Ti, seal-lessconstruction, 1000 mm, Outer-Ø 41 mm, atdischarge side male thread G 1¼”, hoseconnection 1” (NW 25)
ZELM 09 ATEX 0424 X2 m Solvent hose, conductive, 1” (NW 25)2 Hose clamps Stainless steel1 Nozzle brass nickel-plated1 Wall hanger, painted steel1 Bonding ground setFlow rate: 90 l/min*Head: 7 m (Rotor), 16 m (Impeller)*Temperature: see Ex-certificateViscosity: 400 mPas*, Density: 1,3*
Drum pump set JP-AIR 2 SS 1000Pneumatic motor JP-AIR 2, 600 W at max.6 bar operating pressure
IBEx U07 ATEX B014 XPump tube Stainless Steel 316 Ti, seal-lessconstruction, 1000 mm, Outer-Ø 41 mm, at discharge side male thread G 1¼”, hoseconnection 1” (NW 25)
ZELM 09 ATEX 0424 X2 m Solvent hose, conductive 1” (NW 25)2 Hose clamps Stainless steel1 Nozzle brass nickel-plated1 Wall hanger, steel painted1 Bonding ground setFlow rate: 100 l/min*Head: 8 m (Rotor), 15 m (Impeller)*Temperature: see Ex-certificateViscosity: 600 mPas*, Density: 1,5*
Drum pump set JP-AIR 3 SS 1000Pneumatic motor JP-AIR 3, 400 W at max.6 bar operating pressure
IBEx U05 ATEX B007 XPump tube Stainless Steel 316 Ti, seal-lessconstruction, 1000 mm, Outer-Ø 41 mm, atdischarge side male thread G 1¼”, Hoseconnection 1” (NW 25)
ZELM 09 ATEX 0424 X2 m Solvent hose, conductive 1” (NW 25)2 Hose clamps Stainless steel1 Nozzle brass nickel-plated1 Wall hanger, steel painted1 Bonding ground setFlow rate: 120 l/min*Head: 10 m (Rotor), 27 m (Impeller)*Temperature: see Ex-certificateViscosity: 600 mPas*, Density: 1,5*
JP-AIR 1
JP-AIR 2
JP-AIR 3
Order-Nr.
Set JP-AIR 1 3012 4110
Order-Nr.
Set JP-AIR 2 3022 4110
Order-Nr.
Set JP-AIR 3 3032 4110
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and measured at the discharge connection of pump tube (without hose barb).
Drum pumpsets
![Page 10: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/10.jpg)
12
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and measured at the discharge connection of pump tube (without hose barb).
JP-150
JP-160
JP-180
Electric motors
Universal motor 230 V, 50 Hz, 400 W
Protection class IP 24, internally ventilatedmotor, double isolated category II, on/offswitch, overload protection, LVR or speedcontrol as an option, 5 m cable and plug
Flow rate: 80 l/min*Head: 6 m (Rotor), 16 m (Impeller)*Temperature of medium: see page 34*Viscosity: 300 mPas*, Density: 1,3*
Universal motor 230 V, 50 Hz, 250 W
Protection class IP 24, internally ventilatedmotor, double isolated category II, on/offswitch, thermo protection, 5 m cable andplug
Fow rate: 70 l/min*Head: 5 m (Rotor),17 m (Impeller)*Temperature of medium: see page 34*Viscosity: 200 mPas*, Density: 1,2*
Please have a look at further information on page 13.
IP 24 in formertimes IP 44
IP 24 in formertimes IP 44
Universal motor 230 V, 50 Hz, 600 WAlso available in 115 Volt, 60 HzProtection class IP 24, internally ventilatedmotor, double isolated category II, on/offswitch, overload protection, LVR or speedcontrol as an option, 5 m cable and plug
Flow rate: 150 l/min*Head: 8 m (Rotor), 20 m (Impeller)*Temperature of medium: see page 34*Viscosity: 600 mPas*, Density: 1,5*
IP 24 in formertimes IP 44
Order-Nr.
JP-150 1150 2300230 V 1~, 50 Hz, 250 Wthermo protection
Order-Nr.
JP-160 1160 2300230 V 1~, 50 Hz, 400 Wwithout low voltage release
JP-160 1160 2301230 V 1~, 50 Hz, 400 Wwith low voltage release
JP-160 1160 2302230 V 1~, 50 Hz, 400 Wwith speed controlwithout low voltage release
JP-160 1160 2303230 V 1~, 50 Hz, 400 Wwith speed controlwith low voltage release
JP-180 1180 1150115 V 1~, 60 Hz, 600 Wwithout low voltage release
230 V 1~, 50 Hz, 600 Wwithout low voltage release
JP-180 1180 1151115 V 1~, 60 Hz, 600 Wwith low voltage release
230 V 1~, 50 Hz, 600 Wwith low voltage release
Order-Nr. Order-Nr.
JP-180 1180 2300
JP-180 1180 2301
JP-180 1180 1152115 V 1~, 60 Hz, 600 Wwith speed controlwithout low voltage release
230 V 1~, 50 Hz, 600 Wwith speed controlwithout low voltage release
JP-180 1180 2302
JP-180 1180 1153115 V 1~, 60 Hz, 600 Wwith speed controlwith low voltage release
230 V 1~, 50 Hz, 600 Wwith speed controlwith low voltage release
JP-180 1180 2303
![Page 11: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/11.jpg)
13
Universal motor 230 V, 50 Hz, 500 W Also available in 115 Volt, 60 HzProtection class IP 54, externally ventilatedmotor, double isolated category II, on/offswitch, overload protection, LVR or speedcontrol as an option, 5 m cable and plug
Flow rate: 150 l/min*Head: 8 m (Rotor), 21 m (Impeller)*Temperature of medium: see page 34*Viscosity: 600 mPas*, Density: 1,5*
Electric motors
JP-200IP 54
JP-200 1200 1150115 V 1~, 60 Hz, 500 Wwithout low voltage release
230 V 1~, 50 Hz, 500 Wwithout low voltage release
JP-200 1200 1151115 V 1~, 60 Hz, 500 Wwith low voltage release
230 V 1~, 50 Hz, 500 Wwith low voltage release
Order-Nr. Order-Nr.
JP-200 1200 2300
JP-200 1200 2301
JP-200 1200 1152115 V 1~, 60 Hz, 500 Wwith speed controlwithout low voltage release
230 V 1~, 50 Hz, 500 Wwith speed controlwithout low voltage release
JP-200 1200 2302
JP-200 1200 1153115 V 1~, 60 Hz, 500 Wwith speed controlwith low voltage release
230 V 1~, 50 Hz, 500 Wwith speed controlwith low voltage release
JP-200 1200 2303
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and measured at the discharge connection of pump tube (without hose barb).
Please note:
All motors can be combined with all pump tubes over thehandwheel (outside ex areas).
Suitable pump tubes you will find on pages 19–21.
![Page 12: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/12.jpg)
14
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and measured at the discharge connection of pump tube (without hose barb).
JP-280IP 24 in formertimes IP 44
JP-300IP 54
JP-280 1280 1150115 V 1~, 60 Hz, 825 Wwithout low voltage release
230 V 1~, 50 Hz, 825 Wwithout low voltage release
JP-280 1280 1151115 V 1~, 60 Hz, 825 Wwith low voltage release
230 V 1~, 50 Hz, 825 Wwith low voltage release
Order-Nr. Order-Nr.
JP-280 1280 2300
JP-280 1280 2301
JP-280 1280 1152115 V 1~, 60 Hz, 825 Wwith speed controlwithout low voltage release
230 V 1~, 50 Hz, 825 Wwith speed controlwithout low voltage release
JP-280 1280 2302
JP-280 1280 1153115 V 1~, 60 Hz, 825 Wwith speed controlwith low voltage release
230 V 1~, 50 Hz, 825 Wwith speed controlwith low voltage release
JP-280 1280 2303
JP-300 1300 1150115 V 1~, 60 Hz, 825 Wwithout low voltage release
230 V 1~, 50 Hz, 825 Wwithout low voltage release
JP-300 1300 1151115 V 1~, 60 Hz, 825 Wwith low voltage release
230 V 1~, 50 Hz, 825 Wwith low voltage release
Order-Nr. Order-Nr.
JP-300 1300 2300
JP-300 1300 2301
JP-300 1300 1152115 V 1~, 60 Hz, 825 Wwith speed controlwithout low voltage release
230 V 1~, 50 Hz, 825 Wwith speed controlwithout low voltage release
JP-300 1300 2302
JP-300 1300 1153115 V 1~, 60 Hz, 825 Wwith speed controlwith low voltage release
230 V 1~, 50 Hz, 825 Wwith speed controlwith low voltage release
JP-300 1300 2303
Universal motor 230 V, 50Hz, 825 W Also available in 115 Volt, 60 HzProtection class IP 24, internally ventilatedmotor, double isolated category II, on/offswitch, overload protection, LVR or speedcontrol as an option, 5 m cable and plug
Flow rate: 200 l/min*Head: 13 m (Rotor), 30 m (Impeller)*,Temperature of medium: see page 34*Viscosity: 1000 mPas*, Density: 1,9*
Universal motor 230 Volt, 50Hz, 825 WattAlso available in 115 Volt, 60 HzProtection class IP 54, externally ventilatedmotor, double isolated category II, on/offswitch, overload protection, LVR or speedcontrol as an option, 5 m cable and plug
Flow rate: 200 l/min*Head: 14 m (Rotor), 28 m (Impeller)*Temperature of medium: see page 34*Viscosity: 800 mPas*, Density: 1,6*
Please have a look at further information on page 13.
![Page 13: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/13.jpg)
15
Three phase motor 0,37 kW or 0,55 kWspeed multiplier230/400 V, 50 Hz, protection class IP 54,3000 rpm, with junction box and planetarygear 1 : 3
Flow rate: 40 l/min*Head: 4 m (Rotor), 8 m (Impeller)*Temperature of medium: see page 34*Viscosity: 300 mPas*, Density: 1,3*
Planetary gear increases speed of motor.
Ex-motor 230 V, 50 Hz,550 W
Protection class IP 54, externally ventilatedmotor, Ex de II A T6, on/off switch, overloadprotection, low voltage release, 5 m cablewithout plug
EC type examination certificate no.ZELM 09 ATEX 0425 XFlow rate: 100 l/min*Head: 8 m (Rotor), 16 m (Impeller)*Temperature: see Ex-certificateViscosity: 600 mPas*, Density: 1,5*
Im Ex-areas or for pumping flammablemedia only certified stainless steel pumptubes are allowed to be used.
Electric motors
JP-400 EXIP 54
JP-500 SMIP 54speed multiplier
Order-Nr.
JP-400 EX 1400 2301
Order-Nr.
JP-500 SM 0,37 kW 1500 0037
JP-500 SM 0,55 kW 1500 0055
Single planetary gear
230 V 1~, 50 Hz, 550 W
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and measured at the discharge connection of pump tube (without hose barb).
Please have a look at further information on page 13.
![Page 14: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/14.jpg)
16
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and measured at the discharge connection of pump tube (without hose barb).
Pneumatic motors
JP-AIR 1
JP-AIR 2
JP-AIR 3
Order-Nr.
JP-AIR 1 3001 0300
Order-Nr.
JP-AIR 2 3002 0600
Order-Nr.
JP-AIR 3 3003 0400
Pneumatic motor 300 Wat max. 6 bar operating pressure
Motor with brass ball valve and muffler forcompressed air control.
This regulates speed of the motor and va-ries pumping capacity.
EC type examination certificate no.IBEx U05 ATEX B007 XFlow rate: 90 l/min* Head: 7 m (Rotor), 16 m (Impeller)*Temperature: see Ex-certificateViscosity: 400 mPas*, Density: 1,3*
Pneumatic motor 600 Wat max. 6 bar operating pressure
Motor with starting button on the handle(can be fixed). Motor starts and pump istransferring liquid when button is pressed.
EC type examination certificate no.IBEx U07 ATEX B014 XFlow rate: 100 l/min*Head: 8 m (Rotor), 15 m (Impeller)*Temperature: see Ex-certificateViscosity: 600 mPas*, Density: 1,5*
Pneumatic motor 400 Wat max. 6 bar operating pressure
Motor with stainless steel housing and ballvalve at air intake for compressed air con-trol.
This regulates speed of the motor and va-ries pumping capacity.
EC type examination certificate no.IBEx U05 ATEX B007 XFlow rate: 100 l/min*Head: 10 m (Rotor), 27 m (Impeller)*Temperature: see Ex-certificateViscosity: 600 mPas*, Density: 1,5*
Pneumatic motors JP-AIR 1, JP-AIR 2 and JP-AIR 3 can be combinedwith all pump tubes shown on pages 19, 20, 21 and 22.
Only in combination with an ex-proof stainless steel pump tube and abonding ground set ex-protection exists.
![Page 15: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/15.jpg)
17
For filling and transferring acids and caustic solutions in smallquantities out of containers with a small neck.
Universal motor JP-150, 230 V, 250 W, 50 Hz, IP 24, double isola-ted category II, on/off switch with thermo protection, 5 m cableand plug; Pump tubes made of PP or SS, different diameters andlengths, hose connection ½” (at PP Ø 25 mm) or ¾” (at PP Ø 28and 32 mm), at SS tubes ¾” or 1”, wall hanger
Polypropylene pump tube (Shaft: SS 316 Ti) PP (SS)
Polypropylene pump tube (Shaft: Hastelloy 2.4610) PP (HC)
Stainless steel pump tube SS 316 Ti
JP-125Pump tubeØ 25 mm
Laboratory pumpswith electric motor
L/mm Order-Nr.
500 1625 0050
700 1625 0070
1000 1625 0100
JP-128Pump tubeØ 28 mm
500 1628 0050
700 1628 0070
1000 1628 0100
JP-132Pump tubeØ 32 mm
700 1632 0070
1000 1632 0100
1200 1632 0120
JP-125Pump tubeØ 25 mm
L/mm Order-Nr.
500 1125 0050
700 1125 0070
1000 1125 0100
JP-128Pump tubeØ 28 mm
500 1128 0050
700 1128 0070
1000 1128 0100
JP-132Pump tubeØ 32 mm
700 1132 0070
1000 1132 0100
1200 1132 0120
L/mm Order-Nr.
JP-128Pump tubeØ 28 mm
700 1228 0070
1000 1228 0100
1200 1228 0120
JP-132Pump tubeØ 32 mm
700 1232 0070
1000 1232 0100
1200 1232 0120
![Page 16: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/16.jpg)
18
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and measured at the discharge connection of pump tube (without hose barb).
Accessoriesfor laboratory pumps
Nozzle made of Polypropylenefor filling and transferring small quantitieswith hose connection ½” (NW 13)
Nozzle made of PolypropyleneHousing and internal parts in black Polypro-pylene, valve seat and o-rings made of Viton(FPM), spring of Hastelloy C-4 2.4610Flow rate: 100 l/min*Viscosity: 750 mPas*Operating pressure: 2 bar*
Barrel adapter made of Polypropylenefor secure fixing of drum pump in bunghole of a drumPump tube diameter 25, 28 or 32 mm, G 2”
Wall hanger for laboratory pumpfor a secure storage of barrel pump whenout of operation and for protection againstdamages
Barrel adapter made of Stainless steel
for secure fixing of drum pump in bunghole of a drumPump tube diameter 32 mm, G 2”
PVC hosecrystal clear with fabric lining; for non flam-mable, neutral and aggressive mediaOperating pressure: 10 bar*Temperature: –35 °C up to +60 °C*
Universal chemical and solvent hose,conductiveInner wall homogeneous, smooth, EPDM,conductive, suitable for many alkalies,acids, acetates, aldehydes, amines, esters,ethers and ketones, not suitable for carbo-nic gassy products and their derivates.Operating pressure: 16 bar*Temperature: –40 °C up to +90 °C*
Multipurpose chemical hose, conductiveSmooth, PE-X (knitted Polyethylene), con-ductive, suitable for nearly all chemicals,not suitable for oleum, bromine and chlor-sulfon acid.Operating pressure: 10 bar*Temperature: –25 °C up to +90 °C*
Order-Nr.
½” 9016
¾” 9017
9078 9079 9080
9081
9007
½” 9049
¾” 9050
½” 9054
¾” 9055
½” 9059
¾” 9060
![Page 17: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/17.jpg)
19
Head: 13 m* with rotor (pressure 1,3 bar) with JP-280Head: 30 m* with impeller (pressure 3,0 bar) with JP-280
Pump tubes with rotor will be used for high volume at low head.
Pump tubes with impeller will be used for lower flow rates at anhigh head.
All pump tubes will be delivered with a complete hose connec-tion without any extra costs. Customer can choose between ¾” (NW 19), 1” (NW 25) and 5/4” (NW 32). We normally supplyhose connection in 1”. Up to 1200 mm pump tube length also awall hanger will be included in price.
Pump tubes, seal-less constructionPump tube Ø 41mmWith rotor or impeller
Pump tube lengths can be produced from200–3000 mm (depending on material).
Rotor
Impeller
Polypropylene PP (SS) SS-shaft 316 TiØ 41 mm
PolypropylenePP(HC) HC-shaftHastelloy C-4Ø 41 mm
700
Length/mm Order-Nr.
Rotor 2641 0070
Impeller 2641 0071
1000Rotor 2641 0100
Impeller 2641 0101
1200Rotor 2641 0120
Impeller 2641 0121
1500Rotor 2641 0150
Impeller 2641 0151
1800Rotor 2641 0180
Impeller 2641 0181
700
Length/mm Order-Nr.
Rotor 2141 0070
Impeller 2141 0071
1000Rotor 2141 0100
Impeller 2141 0101
1200Rotor 2141 0120
Impeller 2141 0121
1500Rotor 2141 0150
Impeller 2141 0151
1800Rotor 2141 0180
Impeller 2141 0181
Pump tubes
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and measured at the discharge connection of pump tube (without hose barb).
Special pump lengths can be supplied. At Polypropylene, PVDF and Aluminium tubes the delivery timewill be only some days!
![Page 18: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/18.jpg)
20
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and measured at the discharge connection of pump tube (without hose barb).
SS 316 TiSS-shaftØ 41 mm
EC type examinationcertificate no.
ZELM 09 ATEX0424 X
Additional price for rotor or impeller made of SS 316 Ti for stainless steel pump tube Ø 41 mm
Polyvinyl-idenfluorid (PVDF) HC-shaftHastelloy C-4Ø 41 mm
Aluminium(ALU) SS-shaft 316 TiØ 41 mm
700
Length/mm Order-Nr.
Rotor 2241 0070
Impeller 2241 0071
1000Rotor 2241 0100
Impeller 2241 0101
1200Rotor 2241 0120
Impeller 2241 0121
1500Rotor 2241 0150
Impeller 2241 0151
1800Rotor 2241 0180
Impeller 2241 0181
2100Rotor 2241 0210
Impeller 2241 0211
2400Rotor 2241 0240
Impeller 2241 0241
2700Rotor 2241 0270
Impeller 2241 0271
3000Rotor 2241 0300
Impeller 2241 0301
Rotor Stainless steel 2710
Impeller Stainless steel 2725
700
Length/mm Order-Nr.
Rotor 2341 0070
Impeller 2341 0071
1000Rotor 2341 0100
Impeller 2341 0101
1200Rotor 2341 0120
Impeller 2341 0121
1500Rotor 2341 0150
Impeller 2341 0151
700
Length/mm Order-Nr.
Rotor 2441 0070
Impeller 2441 0071
1000Rotor 2441 0100
Impeller 2441 0101
1200Rotor 2441 0120
Impeller 2441 0121
1500Rotor 2441 0150
Impeller 2441 0151
Pump tubes
![Page 19: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/19.jpg)
21
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and measured at the discharge connection of pump tube (without hose barb).
Mixing pump tubes
Mixing pump tubes Polypropylene (PP)HC-shaftØ 50/41 mm
Mixing pump tube made of Polypropylene, MIX PP, seal-less constructionWith double function mixing and pumpingPump tube lengths 1000/1200 mmHose connection PP 1”
Pump tube length of 1000 mmwill be used for mixing and emptying 200 literdrums.
Pump tube length of 1200 mmis the right choice for circulating media incontainers and to empty these containers.
As drive for this mixing pump tube electricmotors JP-180, JP-200, JP-280 and JP-300or pneumatic motors JP-AIR 1, JP-AIR 2 orJP-AIR 3 have stood the test of time.
Mixing pump tubes SS 316 TiSS-shaftØ 50/41 mm
EC type examinationcertificate no. ZELM 09 ATEX0424 X
Mixing pump tube made of SS 316 Ti,MIX SS, seal-less constructionWith double function mixing and pumpingPump tube lengths 1000/1200 mmHose connection SS 1”
Pump tube length of 1000 mmwill be used for mixing and emptying 200 literdrums.
Pump tube length of 1200 mmis the right choice for circulating media incontainers and to empty these containers.
As drive for this mixing pump tube electricmotors JP-180, JP-200, JP-280, JP-300 havestood the test of time. For pumping flamma-ble media or for use in ex-areas only JP-400or pneumatic motors JP-AIR 1, JP-AIR 2 orJP-AIR 3 can be used.
EC type examination certificate no.
ZELM 09 ATEX 0424 X
Length/mm Order-Nr.
1000 2150 0102
1200 2150 0122
Length/mm Order-Nr.
1000 2250 0102
1200 2250 0122
![Page 20: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/20.jpg)
22
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and measured at the discharge connection of pump tube (without hose barb).
Pump tubesfor laboratory pumps
Pump tubes in seal-less constructionFor filling and transferring acids or caustic solutions in small quan-tities out of containers, bottles and flasks with a small neck.
Pump tube will be supplied with hose connection ½” or ¾” in PP, ¾” or 1” in stainless steel and wall hanger
Polypropylene (Shaft: SS 316 Ti) PP (SS)
Polypropylene (Shaft: Hastelloy) PP (HC)
Stainless steel 316Ti SS
Pump tubeØ 25 mm
L/mm Order-Nr.
500 2625 0050
700 2625 0070
1000 2625 0100
Pump tubeØ 28 mm
500 2628 0050
700 2628 0070
1000 2628 0100
Pump tubeØ 32 mm
700 2632 0070
1000 2632 0100
1200 2632 0120
Pump tubeØ 25 mm
L/mm Order-Nr.
500 2125 0050
700 2125 0070
1000 2125 0100
Pump tubeØ 28 mm
500 2128 0050
700 2128 0070
1000 2128 0100
Pump tubeØ 32 mm
700 2132 0070
1000 2132 0100
1200 2132 0120
Pump tubeØ 28 mm
L/mm Order-Nr.
700 2228 0070
1000 2228 0100
1200 2228 0120
Pump tubeØ 32 mm
700 2232 0070
1000 2232 0100
1200 2232 0120
Outside ex-areas these pump tubes can be combined with all electric orpneumatic driven motors.
![Page 21: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/21.jpg)
23
Barrel adapters
Emission proof drum adapterThe adapter prevents emission of harmfulgases and vapours. A vacuum inside drumwill be equalized via a valve.
Hose clamps made of SS
Safety clamp made of tool steelfor secure fixing of drum pump in opendrums or containers
Wall hangerfor drum pumpsfor secure storage of drum pump if out ofoperation and for protection against dama-ges
Strainers for protection of drum pump ifabrasive particles are present
Polypropylene, Size of slots 1,5 x 12 mm,Tube-Ø 40, 41 oder 42 mm
Stainless steel, Size of slots 1,5 x 20 mm, Tube-Ø 41 mm
Discharge arcsfor pumping media directly in other vesselsor containers.These discharge arcs are available in PP,Alu and Stainless steel. They will be con-nected via a wing nut directly at malethread of discharge side.
Clamping flange made of PPfor IBC-Container (for fixing pump tubeswith Ø 40/41 mm), Ø 137 mm, 4-holes, circle of holes-Ø 115 mm
PP 1.4571
Bonding ground set
Accessoriesfor drum pumps Ø 41 mm
Order-Nr.
PP 9001
Stainless steel 316 Ti 9002
PP 9024
Brass 9025
Stainless steel 316 Ti 9026
PP 9011
Stainless steel 316 Ti 9012
Set (4 cables) 9003
Cable 0,5 m 9003/1
Cable 1,0 m 9003/2
Cable 2,0 m 9003/3
Cable 3,0 m 9003/4
¾”, 1” or 5/4” 9004
9005
9006
9070
PP 9072
ALU 9073
Stainless steel 316 Ti 9074
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and measured at the discharge connection of pump tube (without hose barb).
![Page 22: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/22.jpg)
24
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and measured at the discharge connection of pump tube (without hose barb).
Accessoriesfor drum pumps Ø 41 mm
Automatic nozzle made of Aluminiumfor diesel and heating oil, fem. thread 1”Flow rate: 60 l/min*
Nozzle made of Polypropylene PPHousing and internal parts made of blackPP, valve seats and o-rings made of Viton(FPM), spring of Hastelloy C-4, 2.4610
Hose connection: NW 19 ¾” or NW 25 1” Operating pressure: 2 bar*Viscosity: 750 mPas*Flow rate: 100 l/min*Temperature of medium: 50 °C*
Nozzle made of brass nickel-plated, PTFE-seals and swivel jointSuitable also for pharmaceutical and foodindustry. Hose connection with swivel jointNW 19 ¾”, NW 25 1” or NW 32 5/4”
Operating pressure: 4 bar*Viscosity: 750 mPas* Flow rate: 80 l/min*Temperature of medium: 80 °C*
Electronic flowmeter made of Poly propy-lene, on both sides male thread 1”Viscosity: 20 mPas*Flow range: 20–120 l/min*
Electronic flowmeter made of PVDF, onboth sides male thread 1”
Viscosity: 40 mPas*Flow range: 5–90 l/min*
Nozzle made of PVDFfor transferring and filling neu tral or aggres-sive media, with safety holder and hoseconnection with swivel joint
Operating pressure: 3 bar*Viscosity: 900 mPas*Flow rate: 65 l/min*Seals: Viton (FKM)Temperature of medium: 90 °C*
Stainless steelnozzle on request
Order-Nr.
NW 19 ¾” 9017
NW 25 1” 9018
9031
NW 19 ¾”
NW 25 1”
Hose con. NW 19 ¾” 9041
Hose con. NW 25 1” 9042
Flowmeter 9020
2 PP hose connections 1”incl. seals, suitable for 9020
Flowmeter 9021
2 PVDF hose connections 1”incl. seals, suitable for 9021
Hose con. NW 32 5/4” 9043
Male thread 1” 9044
Male thread 5/4” 9045
Female thread 1” 9046
![Page 23: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/23.jpg)
25
Mechanical flowmeter K33/K44made of Alu/plastic, ca. 20–120 l/min*,10 bar*, on both sides fem. threads 1”,for viscosities from 30–2000 mPas*,especially suitable for lubricants, heatingoil/ diesel, anti freezing liquid (undiluted)and vegetable oils (different flowmeters!)
Universal chemical and solvent hose,conductive, suitable for many acids and alkalies
Multi purpose chemical hose, suitable for nearly all chemicals, exceptoleum, bromine and chlorsulfon acid
Further hoses like mineral oil hose or food grade hoses are available.Prices on request.
PVC hose, crystal clear with fabric lining fornon flammable, neutral and aggressivemediaOperating pressure: 10 bar*Temperature: –35 °C up to +60 °C*
Electronic flowmeteruncalibrated oval gear meter made of Alu
Electronic flowmeter made of SS,on both sides female thread 1”
Electronic turbine-wheel flowmeter, resetta-ble display for subset, flow volume in l/min,non resettable total amountFlow range: 10 l/min up to 190 l/min*Life time of battery: ca. 2.000 hAccuracy: +/–1%Materials: Stainless steel housing, all partsthat will get in contact with medium aremade of Stainless steel, PVDF, Ferrit, Wolf-ram-carbide, ceramic and rubber
Order-Nr.
Electronic flowmeter 9008
Display with 3 digits 9035
Display with 4 digits 9036
¾” 9050
1” 9051
1¼” 9052
1½” 9053
¾” 9055
1” 9056
1¼” 9057
1½” 9058
¾” 9060
1” 9061
1¼” 9062
1½” 9063
Oil, fem. thread ¾”, 90376–60 l/min, 70 bar
Diesel, fem. thread 1”, 903810–100 l/min, 30 bar
Oil/diesel, fem. thr 1½”, 903950–150 l/min, 20 bar
Accessoriesfor drum pumps Ø 41 mm
*All values represent maximum performance data. Flow rate obtained with water at 18 °C and measured at the discharge connection of pump tube (without hose barb).
Details see on page 18
Details see on page 18
![Page 24: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/24.jpg)
26
High viscositypump tubes
JP-700.12.1 SR JP-700.12.2 SR
70010001200
StatorNBR
NBR light
Pump tubes JP-700 SR speed reducerFor direct connection to electric universalmotors JP-180 respectively JP-280 and toair driven motors JP-AIR 1, JP-AIR 2 andJP-AIR 3.
Planetary gear reduces speed from8.000–12.000 rpm to 550–800 rpm.All parts of the pump that will get in contactwith pumped medium are made of Stainlesssteel or identical to material of stator. Outer -Ø 54 mm. Shaft seal by single acting mecha-nical seal Chrome/Carbon/Viton. At dischar-ge side male thread R 1½” made of Stain-less steel.
ATEX for PTFE stator in preparation
Pump tubes JP-700.50.1 SR you will find on page 27.
speed reducer
JP-700 SR
Length/mm Length/mm
80011001300
StatorNBR
NBR light
70010001200
StatorEPDM
80011001300
StatorEPDM
70010001200
StatorHYPALON
80011001300
StatorHYPALON
70010001200
StatorVITON(FKM)
80011001300
StatorVITON(FKM)
70010001200
StatorPTFE
80011001300
StatorPTFE
JP-700.25.1 SR JP-700.25.2 SR
70010001200
StatorNBR
NBR light
Length/mm Length/mm
80011001300
StatorNBR
NBR light
70010001200
StatorEPDM
80011001300
StatorEPDM
70010001200
StatorHYPALON
80011001300
StatorHYPALON
70010001200
StatorVITON(FKM)
80011001300
StatorVITON(FKM)
70010001200
StatorPTFE
80011001300
StatorPTFE
![Page 25: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/25.jpg)
27
JP-700.50.1 SR JP-700.50.1 SR
80011001300
StatorNBR
NBR light
Length/mm Length/mm
80011001300
StatorVITON(FKM)
80011001300
StatorEPDM
80011001300
StatorPTFE
80011001300
StatorHYPALON
High viscositypump tubesContinuation from page 26
JP-700 DR Pump tubes JP-700 DRRigid couplingFor connection with three phase motors,gear motors and pneumatic driven motors
All parts of the pump that will get in contactwith medium are made of Stainless steel ormaterial of stator. Outer tube-Ø 54 mm
Shaft seal via single acting mechanical sealmade of Chrome/Carbon/Viton. At disch-arge side male thread R 1½” made of Stain-less steel.
ATEX for PTFE stator in preparation
Rigid coupling
JP-700.12.1 DR JP-700.12.2 DR
70010001200
StatorNBR
NBR light
Length/mm Length/mm
70010001200
StatorVITON(FKM)
70010001200
StatorEPDM
JP-700.25.1 DR
JP-700.25.1 DR
70010001200
StatorNBR
NBR light
70010001200
StatorEPDM
70010001200
StatorPTFE
70010001200
StatorHYPALON
70010001200
StatorVITON(FKM)
70010001200
StatorPTFE
70010001200
StatorHYPALON
80011001300
StatorNBR
NBR lightEPDM
80011001300
StatorHYPALON
80011001300
StatorViton(FKM)
80011001300
StatorPTFE
![Page 26: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/26.jpg)
28
JP-700.25.2 DRLength/mm
80011001300
StatorVITON(FKM)
80011001300
StatorPTFE
JP-700.50.1 DR JP-700.50.1 DR
Accessoriesfor JP-700 SR/DR
80011001300
StatorNBR
NBR light
Length/mm Length/mm
80011001300
StatorVITON(FKM)
80011001300
StatorEPDM
80011001300
StatorPTFE
80011001300
StatorHYPALON
High viscositypump tubes/Accessories
Continuation from page 27
JP-700.25.2 DRLength/mm
80011001300
StatorNBR
NBR light
80011001300
StatorEPDM
80011001300
StatorHYPALON
Complete hose connection, Stainless steelfor JP-700 SR and JP-700 DRwing nut made of brass nickel-plated(for male thread G 1½”), hose barb made ofStainless steel, seal made of PTFE
Hose connect. NW Order-Nr.
1” 25 1206
1¼” 32 1207
1½” 38 1208
![Page 27: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/27.jpg)
29
JP-700 DRFlexible coupling
Pump tubes JP-700 DRFlexible couplingTechnical data and materials as descri-bed at JP-700 DR with rigid coupling
JP-700.12.1 DR JP-700.12.2 DR
70010001200
StatorNBR
NBR light
Length/mm Length/mm
80011001300
StatorNBR
NBR light
70010001200
StatorEPDM
80011001300
StatorEPDM
70010001200
StatorHYPALON
80011001300
StatorHYPALON
70010001200
StatorVITON(FKM)
80011001300
StatorVITON(FKM)
70010001200
StatorPTFE
80011001300
StatorPTFE
JP-700.25.1 DR JP-700.25.2 DR
70010001200
StatorNBR
NBR light
Length/mm Length/mm
80011001300
StatorNBR
NBR light
70010001200
StatorEPDM
80011001300
StatorEPDM
70010001200
StatorHYPALON
80011001300
StatorHYPALON
JP-700.50.1 DRLength/mm
JP-700.50.1 DRLength/mm
80011001300
StatorNBR
NBR light
80011001300
StatorEPDM
80011001300
StatorHYPALON
70010001200
StatorVITON(FKM)
80011001300
StatorVITON(FKM)
70010001200
StatorPTFE
80011001300
StatorPTFE
80011001300
StatorVITON(FKM)
80011001300
StatorPTFE
Pump tubes
![Page 28: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/28.jpg)
30
Three phasemotors
JP-AIR 4JP-AIR 6JP-AIR 8
kW
0,370,550,751,101,502,20
Motor protection switch ason/ off switch
IP 55 EEx e II T3
Three phase motors for JP-700 DRThree phase motors 230/400 V, 50 HzFurther motor sizes and special voltage onrequest
Accessories
Pump hanger made of SS
JP-AIR 6; 1,0 kW, G ½”, Flange IEC 72
JP-AIR 8; 1,5 kW, G ½”, Flange IEC 72
Pneumatic driven motors foreccentric screw pumps JP -700 DR0,5–1,5 kW, 900 rpmat 6 bar operating pressure
JP-AIR 4; 0,5 kW, G 3/8”, Flange IEC 75
900
rpm
kW
0,370,550,951,401,902,60
900
rpm
kW
0,370,550,751,101,502,20
IP 55 EEx e II T3
700
rpm
kW
0,370,550,951,301,902,60
700
rpm
for all motor sizes
mounted on terminal box available for all motor sizesexcept air motors
Order-No.
JP-AIR 4 AIR 4
Order-No.
JP-AIR 6 AIR 6
Order-No.
JP-AIR 8 AIR 8
Motors
![Page 29: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/29.jpg)
31
JP-700.12.1 H
Pump housing: Stainless SteelLatern and motor direct coupledShaft and rotor: Stainless steelStators: see schedulePin-joints/seal: Pins/O-RingsMechanical seal: Chrome/Carbon/VitonBase plate: Steel painted
Additional price formechanical sealmade of SiC/SiC/Viton
Horizontal eccentric screw pumps JP-700 Hto connect with three phase motors, gearmotors or air driven motors
Pump tubes in a special food grade versionare also available. Please ask us!
JP-700.12.2 H
Three phase motorsfor horizontal eccentric screw pump tubes JP-700 HThree phase motors 230/400 V, 50 Hz, 700 or 900 rpm, Flange-Ø 160 mm, B3/B5. See on page 30
NORD gear motors for horizontal eccentric screw pump tubesJP-700 H
Gear motors 230/400 V, 50 Hz Foot-/Flange-Execution 160 mm
Thermo sensors are available onrequest. Please ask us.
JP-700 H
NBR/NBR lightVITON (FKM)PTFE
Stator Stator
NBR/NBR lightVITON (FKM)PTFE
JP-700.25.1 H JP-700.25.2 H
NBR/NBR lightVITON (FKM)PTFE
Stator Stator
NBR/NBR lightVITON (FKM)PTFE
kW rpm
0,370,55 107 0,75 to1,10 6241,50
JP-700.50.1 HStator
NBR/NBR lightVITON (FKM)PTFE
Pump tubes
![Page 30: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/30.jpg)
32
Protank 25
Description Order-No.
Protank 25, Pumps for diesel and heatingoil of hazard class A IIIFor refueling of agriculture machines, trac-tors, trucks, motor boats, vehicles, etc.
protank25
12 V
Construction: Light, however robust
Quality: Manufacturing process conforms to strictest quality stan-dards
Siphon protection: Permanently effective, acc. to law
Suction head: Up to 2 m in case of raised liquid column
Delivery head: 9 to 15 m
Liquid column: Not self-priming, liquid column raised by meansof a piston pump
Motor variants: 230 V 1-AC, 24V DC, 12V DC
Motor interpretation: All motors are designed for steady-state ope-ration
Motor protection: Overload protection by a thermal circuit brea-ker, self-resetting
Handling: Discharge hose can be simply dismantled from pump
On/- Off switch: Lighted
Medium: Smooth operation even in case of lightly contaminatedmedium
Material: Pump housing and impeller made of cast iron
Suction hose: length 1,6 m, ¾”, with strainer
Discharge hose: length 4 m, 1”
Nozzle: standard nozzle or automatic nozzle included in set
Package: non returnable package
Voltage 230 V 24 V 12 VFrequency 50 Hz – –Current 1~AC DC DCPower consumpt. 1,8 A 10 A 14 AWattage 320 W 240 W 180 WFlow rate per min.* 52 l 43 l 38 lHead 15 m 10 m 9 mWeight 2,5 kg 2,5 kg 2,5 kg
Performance data
*at free discharge, suction head 1,6 m, with hose DN 19;all values are maxmimum data
Diesel pumps
with standard nozzle 23 711with automatic nozzle (type approved) 23 714with automatic nozzle 23 717
protank25
24 V
with standard nozzle 23 721with automatic nozzle (type approved) 23 724with automatic nozzle 23 727
protank25
230 V
with standard nozzle 23 731with automatic nozzle (type approved) 23 734with automatic nozzle 23 737
![Page 31: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/31.jpg)
33
Protank 50, Pumps for diesel and heatingoil of hazard class A IIIFor refueling of agriculture machines, trac-tors, trucks, motor boats, vehicles, etc.
Construction: Robust design fulfilling the hardest tasks
Siphon protection: Permanently effective, acc. to law
Delivery head: 9 to 17 m, up to 2 m self priming
Motor protection: Overload protection by a thermal circuit brea-ker, self-resetting
Handling: Discharge hose can be easily disassembled from pump
Material: Pump housing and impeller made of cast iron
Suction hose: length 1,6 m, 1”, with strainer
Suction hose: length 4 m, 1”
Nozzle: Standard nozzle or automatic nozzle
Flowmeter: Mechanical flowmeter can be supplied as accessory,depending on version of pump set
Package: non returnable package
Protank 50
Voltage 230 V 24 V 12 VFrequency 50 Hz – –Current 1~AC DC DCPower consumpt. 2,2 A 12 A 22 AFlow rate per min.* 50 l 40 l 38 lHead 17 m 9 m 9 mWeight 6,2 kg 4,0 kg 4,0 kg
Performance data
*at free discharge, suction head 1,6 m, with hose DN 19all values are maximum data
Description Order-No
protank50
12 V DC,with
clamps38 l/min
with standard nozzle 23 911with standard nozzle and mech. flowmeter 23 912with automatic nozzle (type approved) 23 914with autom. nozzle (type ap.) and flowmeter 23 915with automatic nozzle 23 917with automatic nozzle and mech. flowmeter 23 918
protank50
24 V DC,with
clamps40 l/min
with standard nozzle 23 921with standard nozzle and mech. flowmeter 23 922with automatic nozzle (type approved) 23 924with autom. nozzle (type ap.) and flowmeter 23 925with automatic nozzle 23 927with automatic nozzle and mech. flowmeter 23 928
protank50
230 V,1~AC
with plug50 l/min
with standard nozzle 23 931with standard nozzle and mech. flowmeter 23 932with automatic nozle (type approved) 23 934with autom. nozzle (type ap.) and flowmeter 23 935with automatic nozzle 23 937with automatic nozzle and mech. flowmeter 23 938
Diesel pumps
![Page 32: Preisliste E:Layout 1 - Svuota Fusti...at JP-03 NBR/Buna Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on mounting of hand lever Telescopic suction tube has a length of 340–900](https://reader033.vdocuments.us/reader033/viewer/2022060723/6082dcdef25a411a17610de3/html5/thumbnails/32.jpg)
34
Electric and pneumatic driven drum and container pumps
Overview of different pump tube materials and their applications
Stainless steel = SS- pump tubes, max. temperature accor-ding to ex certificate, outside ex areas 90 or 120 °Care suitable for highly flammable media up to temperature class4 and for use in ex zone 0.*)
With SS pump tubes principally all neutral and flammable thinfluid media like solvents, organic and diluted anorganic acidsand alkalies will be pumped.
Examples of media: acetone, alcohol, ammonia, gasoline, flam-mable solvents, pyroxylin varnishes, perchlor ethylene, trichlore-thylene, toluol, caustic potash solution, sodium hydroxide, phos-phoric acid up to 60 %, sulphuric acid up to 7,5 and from 96 %.
Further on suitable for fruit juices, milk, edible oils and all otherat Alu pump tubes mentioned media.
Polypropylene = PP pump tubes up to 50 °Care suitable for aggressive and heavily flammable media, espe-cially for alkalies, acids and neutral media.
Examples of media: caustic potash, sodium hydroxide, formicacid, ammonia, boric acid, chromic acid up to 10%, acetic acid,hydrofluoric acid up to 70%, fruit acids, lactic acid, phosphoricacid, hydrochloric acid and sulphuric acid up to 80%.
Further on suitable for fertilizer solutions, photo developer solu-tions, copper chloride and distilled water.
Polyvinylidenfluorid = PVDF pump tubes up to 90 °Care suitable for aggressive and heavily flammable media, espe-cially for high concentrated alkalies, acids and neutral media.
Examples of media: bromhydric acid, chromic acid, cloric acid,hydrofluoric acid, sodium hypochlorite, nitric acid up to 75%and sulphuric acid.
Further on all media - except caustic soda - that are mentionedat PP pump tubes can be pumped.
Aluminium = Alu pump tubes up to 90 °C are suitable for neutral and heavily flammable media.
Examples of media: diesel, heating oil, hydraulic oil, bore emul-sions, liquid soaps, liquid wax, water and non flammable sol-vents.
*Ex- protection only in combination with ex certified electric or pneumatic motors.
Examples of mediaDepending on selected pump tube material and existing envi-ronment (non explosive or hazardous area) following media canbe pumped:
Hydrochloric acid, caustic soda, sulphuric acid, formic acid,amonium chloride, photo developer solution, caustic potash,fixing baths, acetic acid, phosphoric acid, fruit acids, nitricacid, hydrofluoric acid, bleaching lye, lactic acid, boric acid,chromic acid, oils, soap solutions and many other liquids.
We will be glad to inform you in detail.