Download - Peltor Lite-Com
Peltor Lite-Com
LLPB 0410
Peltor Lite-Com
LLPB 0410
Peltor Lite-Com
LLPB 0410
Lite-Com III
Peltor Lite-Com III
Peltor Lite-Com
LLPB 0410
Peltor Lite-Com III
Efficient hearing protectors with electronics for almost unlimited communication.
Built-in communication radio for ”hands-free” short range communication.
Headset for external audio equipment, like another comm.radio, a mobile telephone, an FM radio, CD player etc …
Peltor Lite-Com III
• Volume dependent stereo surround sound
• Sounds from the surrounding; conversation, sounds from machines and warning signals are reproduced in full stereo, which gives a correct direction to the sound source.
• Weak sounds can even be amplified to higher level than without hearing protector.
• Impulse noises are effectively reduced to harmless level.
Efficient hearing protectors with electronics for almost unlimited communication.
Peltor Lite-Com III
• Buttons easily reachable and logically placed.
• Actual settings are shown at LCD on the right cup.
• Electronic voice confirming all settings. No need for taking off the headset / hearing protector.
• The headset is automatically turned off two hours after the last change
LLPB 0410
Efficient hearing protectors with electronics for almost unlimited communication.
to save the batteries.
• Four different settings can be stored in memories.
Peltor Lite-Com III
•Dark blue coloured cups to separate from ATEX headsets.
LLPB 0410
•Attenuation (A band): SNR=31 dBH=33, M=28, L=21,
Efficient hearing protectors with electronics for almost unlimited communication.
Peltor Lite-Com III
• Push-To-Talk (PTT)
• Two frequency ranges
• Voice Operated Transmission (VOX)
LLPB 0410
for “hands-free” operation
in very noisy environments
LPD 433 MHz or PMR 446 MHz
Built-in communication radio
• Electret or dynamic microphone with excellent noise suppression.
Peltor Lite-Com III
Anti VOX prevents from interfering on an already occupied frequency
PMR Private Mobile Radio446 Frequency band is 446 MHz
More users can work on the same channel without having to listen to each other.
Multiplied with 38 sub channels
LLPB 0410
Lite-Com III PMR 446
Built-in communication radio
8 channels
by added tone codes (”sub tones”).
Peltor Lite-Com III
Two output levels: 25 mW or 150mW.
Standard batteries Two 1.5V type AA batteries; alkaline or rechargeable batteries are required.
LLPB 0410
Operating time around 15 hours with 2000 mAh batteries. (20% Hi power speech, 20% receiving, 60% stand-by). Operating time varies greatly depending on the type of batteries and how the Lite-Com is used.
Built-in communication radioLite-Com III PMR 446
Peltor NiMH accumulator ACK03 (1200 mAh) or other rechargeable batteries of type AA can also be used.
Working range of up to about 2 km at high power.
Peltor Lite-Com III
Lite-Com III LPD 433
• Working range of up to about 1 km.
• 69 channels in the 433 MHz band.
LLPB 0410
Lite-Com III LPD 433Lite-Com III LPD 433
Built-in communication radio
LPD Low Power Device433 Frequency band is 433 MHz
Operating time around 18 hours with 2000 mAh batteries. (20% Hi power speech, 20% receiving, 60% stand-by). Operating time varies greatly depending on the type of batteries and how the Lite-Com is used.
• 10 mW output power
Peltor Lite-Com III
LLPB 0410
Headset for connected external equipment
Another communication radio, mobile telephone, FM radio receiver, CD-player et c. can be connected to the external audio socket
Separate “PPT AUX” for operating an externally connected communication radio or telephone.
The internal communication radio has top priority. Other sounds are automatically muted
Peltor Lite-Com III
Lite-Com III LPD 433
LLPB 0410
• All other features are equal to Lite-Com III PMR 446but some countries do not accept both frequency bands.
Peltor Lite-Com III .Peltor Lite-Com Basic
LLPB 0410
Peltor Lite-Com BasicPeltor Lite-Com Basic
LLPB 0410
.
Efficient hearing protectors with highly attenuating cups
•Attenuation (A band): SNR=31 dBH=33, M=28, L=21,
Peltor Lite-Com Basic
•Dark blue coloured cups to separate from ATEX headsets.
Peltor Lite-Com Basic
More users can work on the same channel without having to listen to each other.
38 sub channels with tone call.
LLPB 0410
Lite-Com Basic PMR 446
Built-in communication radio
8 channels
Only available for the 446 MHz band
Anti VOX prevents from interfering on an already occupied frequency
Peltor Lite-Com Basic
Two output levels: 25 mW or 150mW. Working range of up to about 2 km at high power.
Standard batteries Two 1.5V type AA batteries; alkaline or rechargeable batteries are required.
LLPB 0410
Operating time around 21 hours with 2000 mAh batteries. (20% Hi power speech, 20% receiving, 60% stand-by). Operating time varies greatly depending on the type of batteries and how the Lite-Com is used.
Built-in communication radioLite-Com Basic PMR 446
Peltor NiMH accumulator ACK03 (1200 mAh) or other rechargeable batteries of type AA can olso be used
Peltor Lite-Com
LLPB 0410
MT53H7A440B Lite-Com III PMR 446, over the head bandMT53H7B440B Lite-Com III PMR 446, behind the neck bandMT53H7P3E440B Lite-Com III PMR 446, helmet attachment
MT53H7A430B Lite-Com III LPD 433, over the head bandMT53H7B430B Lite-Com III LPD 433, behind the neck bandMT53H7P3E430B Lite-Com III LPD 433, helmet attachment
MT53H7A4400 Lite-Com Basic 446 PMR, over the head bandMT53H7B4400 Lite-Com Basic 446 PMR, behind the neck bandMT53H7P3E4400 Lite-Com Basic 446 PMR, helmet attachment
Product Numbers
Peltor Lite-Com
LLPB 0410
Accessories
ACK03NiMH battery to replace 2 x standard AA batteries.
Capacity: 1700 mAhTemperature: -20 to +50 degrees CelsiusCharging temperature: 0 - +25 degrees Celsius
FR03**Battery charger for ACK03Indication with green light when battery is fully charged.Charging time 4 – 5 hours
Connection: 100 – 240 V AC, 50 Hz, Max. 1 ACharging: 12 V DC, 250 mA
Approvals
• PPE directive 89/686/EEC
Standards
· EN 352 (Attenuation)
• EMC directive 89/336/EEC
Standards
· EN 300 328 (radio test),
· EN 301 489-1/-7-17 (EMC test)
· EN 60 950 (electrical safety)
Peltor Lite-Com
LLPB 0410
• This means that Lite-Com comply with the requirements for CE marking.
Differing functions Lite-Com III Lite-Com III Lite-Com BasicPMR 446 LPD 433 PMR 446
SURROUND
Ambient sound X X -
SUB CHANNEL
38 sub tones X - X
POWER
Two power levels X - X
SET
Memory settings X X -
PTT AUX
For external equipment X X -
Peltor Lite-Com
LLPB 0410
Technical data
Lite-Com III PMR 446 Lite-Com III LPD 433 Lite-Com Basic
MT53H7*440B MT53H7*430B MT53H7*4400 -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Frequency range: 446.00625 – 446.09375 MHz 433.075 – 433.775 MHz 446.00625 – 446.09375 MHzCommunication mode: Simplex Simplex Simplex Channels: 8 (x38 sub channels) 69 8 (x38sub channels)Channel steps: 12.5 kHz 25 kHz 12.5 kHzDeviation: Max. ± 2.5 kHz± 6 kHz ± 2.5 kHzOutput power ERP: 25/150 mW 10 mW 25/150 mWMax. range approx. 2 km 1 km 2 km Current consumption: Stand-by or receiving: 80 – 100 mA 80 – 100 mA 60 – 70 mA Transmission approx.: 160 / 250 mA 160 mA 110 / 200mAOperating temperature: -20 ºC – +55 ºC -20 ºC – +55 ºC -20 ºC – +55 ºCStorage temperature: -40 ºC – +55 ºC -40 ºC – +55 ºC -40 ºC – +55 ºCWeight, over-head band (incl. AA alkaline batt.): 436 g 436 g 418 g
Peltor Lite-Com
LLPB 0410
Peltor Lite-Com
The well known Peltor Lite-Com headsets with built-in communication radios give almost unlimited possibilities for wireless communication between two or more people.
In noisy environments they at the same time efficiently preserve against occurring harmful noise.
LLPB 0410
LLPB 0410
Thank you for your attention!
Peltor Lite-Com