easy for me’‘Making itGREATIDEAS FORYOUR CONCRETESURFACES...
PAVING & CONCRETE PAINTS & COLOUR
It’s never been easier to inject some life and personality into your paving and concrete surfaces. Whether it be a new fresh colour or a decorative finish, Pascol has you covered from start to finish.Transform ordinary concrete into a luxurious floor that resembles marble or glazed stone with the Pascol family of coatings.
“it’s your choice”
Your paving, your style...
Get Inspired: Whether you’re repainting the old driveway, laying down a new finish for the garage, spicing up a patio, pool decks or even decorating an interior slab, use this brochure to help you decide what’s best for your project.
Surface preparation is key to the success of your project and provides extended coating life. Your surface must be clean, dry and free of dirt, grease, oil or other contaminants before applying any coating.
Choose a Finish: Are you going to use paint, use a clear protective sealer or perhaps go for a more decorative finish? Whatever your choice Pascol has more than enough colours, sealers and finishes to suit your style.
The BOND-LOK ADvANTAgeSelected Pascol products contain technologies that work to maximize the bond between the floor coating and the concrete. This bond extents the life of your finish, giving you maximum durability. (See side of pack for details)
Top TipNot sure which product to use? Use the Product Application Guide on the back page to find out which products and surfaces are best suited for your project.
Delightful White
Smoky Emerald Lazy River
Light Grey
Herbal Grey
Soulful Green French Navy
New Concrete
Almond Green
Frith
Cool Stone Weathered Concrete
Balsam Branch Grey Spruce
Blue Grey Sky
Porch Blue Concrete GreyMedieval Grey Cactus Garden Grayling
Bleached Stone
Hacienda Bloom
Tijuana Tan
Toasted Cinnamon
Mellow Suede
Bungles
Tile Red
Weathered Oak
Waimea
Copper Mine
Sunwashed Brick
Brush Tail
English Toffee Sugared Cream
Beach Dawn Copper Clay
Royal DawnRed Waratah
Caramelise Bear
Pascol 1-Part Epoxy & Solid Colour Paving Paint Colour Range
PASCOL 1-PART ePOXY PAvINg PAINT
For concrete or masonry garage floors, driveways, paths, patio and interior floors.
• Resists hot tyre pick-up
• Protects against UV rays & chemicals
• 2 hour recoat
• Satin finish
• Water based
• Suitable for interior and exterior use
Paving Paints
Makes concrete look new
Iron Grey
Sandstone
Make your paving a focal point and enhance the style of your home with Pascol paving paint.
Why stop there…transform your garage floors, highlight a pathway, show off your patio, enhance the pool deck and even breathe life into bare concrete floors.
PASCOL SOLID COLOUR PAvINg PAINT
For concrete, brick, pavers, masonry, pool decks, driveways, paths and patios.
• Beautifies old concrete
• Protects against UV rays and chemicals
• Low gloss finish
• Recoat in 24 hours
• Solvent based
• Suitable for exterior use
PASCOL NON-SLIP PAvINg PAINT
For concrete, masonry, steps, patios, paths and pool decks. Not suitable for drive-on surfaces such as driveways and garage floors.
• Heavy-duty polymer-fibre matrix
• Maximum slip resistance
• Protects against UV rays & chemicals
• Flat finish, high profile non-slip finish
• Recoat in 2 hours
• Suitable for interior and exterior use
Heavy-duty uRetHaNe foRmula
Heavy-duty ResiN foRmula
availaBle iN 40 colouRs
availaBle iN 40 colouRs
availaBle iN 2 colouRs
WateR Based
Top Tip• For additional slip resistance add Pascol Anti-Skid Floor Texture Additive
• Optional topcoat: use Pascol Multi-Purpose Sealer for added protection
All
prin
ted
co
lour
s ha
ve b
een
mat
ched
as
clo
se t
o t
he a
ctua
l pai
nt c
olo
ur a
s th
e p
rintin
g p
roce
ss w
ill a
llow
. Slig
ht v
aria
tion
in s
had
es m
ay o
ccur
.
APPLICATIONPascol Semi-Transparent Concrete Stain allows you to achieve a variety of different looks depending on the application used. Below is a reference on how the finish may appear when applying various numbers of coats or colours.
NATURAL STONe FINISh
UNIFORm COLOUR FINIShFor less transparent look a second coat can be applied
mULTI - COLOUR FINIShRandomly spray the second cover over the first
2 colours2 coats
Pascol Semi-Transparent Concrete Stain Colour Range
The final appearance depends on the concrete texture, porosity and how the stain is applied. The final stain colour will draw attention to any (lighter or darker) patterns in the prepared concrete.
1 coat Top TipTry combining 2 or 3 different colours for a truly unique look. Be creative and experiment to get just the look you want.
Beach Stone Beach Stone Beach Stone& Outback Rock
Blue Alloy
Gold Leaf
Melbourne Slate
Quarry Red
Shaded Forest
Autumn Tint
Dark Nebula
Grey Ash
Mudbrick Flats
Saffron Stem
Urban Stone
August
Dry River BedKemp
Olive Shade
Saltillo Tile
Votive
Beach Stone
Gem Stone
Lintel
Outback Rock
Seville
Wood Charcoal
Cavern Pool
Green OxideMing Jade
Red Rocks
Tranquil Pool Aqua Stone
Decorative Concrete Finishes
Coloured stone lookTurn ordinary concrete surfaces into an inviting space with Pascol Semi-Transparent Concrete Stain. The natural variations and textures of concrete, brick and pavers can be highlighted to give the appearance of natural coloured stone or slate. Alternatively be creative and invent your own style by mixing two finishes together.
PASCOL SemI-TRANSPAReNT CONCReTe STAIN
Use on concrete, aggregate, brick, pavers, flagstone, pool decks, driveways, paths and patios. Not suitable for garage floors.
• Durable acrylic-urethane formula
• Protects and beautifies; provides a multi-coloured appearance that looks like natural stone
• Highlights natural variations and texture of surface
• Recoat in 4 hours
PASCOL eTChINg STAIN
Pascol Etching Stain reacts with the minerals present in your concrete to provide a permanent decorative finish. It transforms the colour of your concrete to a contemporary, multi - toned rich marble appearance. For concrete pool decks, driveways, paths and patios.
• Permanent multi-toned rich marbled appearance
• Water based
• Seal stain with Pascol Etching Stain Sealer
PASCOL eTChINg SeALeR
For concrete pool decks, driveways, paths & patios.
• Heavy-duty resin formula
• Enhances & seals the colour & design of Etching Stain
• Solvent based
Top TipOptional topcoat: use Pascol Multi-Purpose Sealer for added protection
WateR Based
loW Gloss fiNisH
availaBle iN 29 colouRs
availaBle iN 2 colouRs
eXteRioR use oNly
Coffee Tan
Looks like marbleA
ll p
rinte
d c
olo
urs
have
bee
n m
atch
ed a
s cl
ose
to
the
act
ual p
aint
co
lour
as
the
prin
ting
pro
cess
will
allo
w. S
light
var
iatio
n in
sha
des
may
occ
ur.
PASCOL WeT LOOK SeALeR
For pebblecrete, aggregate, concrete, brick, pavers, masonry, slate, flagstone, driveways, paths & patios.
• Heavy-duty resin formula
• Resists water, petrol & oil stains
• Enhances surface appearance
• Recoat in 2 hours
• Suitable for interior and exterior use
PASCOL NATURAL LOOK SeALeR
For pebblecrete, exposed aggregate, concrete, brick, pavers, masonry, slate, mortar, flagstone, driveways and patios to enhance their natural beauty.
• Penetrating silicone formula
• Deep penetrating to form a protective barrier against water
• Retains natural matt look of the surface
• Recoat in 10 minutes (wet on wet)
• Suitable for exterior use only
Top TipUsing Natural Look Sealer is the perfect solution to protect and keep paving looking clean and new.
Top TipAvoid using this product on non-porous, sealed surfaces. To test, place a few drops of water on surface. If water sinks in, the surface is porous enough to use this finish. If water remains on the surface, do not use.
WateR Based
WateR Based
cleaR
Gloss fiNisH
Clear and waterproof sealers
Protect & beautifySeal and protect your paving with quality sealers that will enhance its colour and ensure your efforts are long-lasting. Choose from our range of water based sealers for the ultimate finish.
PASCOL mULTI-PURPOSe SeALeR
For concrete, aggregate, masonry, brick, slate, garage floors, driveways, paths and patios.
• Heavy-duty resin formula
• Resists hot tyre pick-up
• Resists petrol & oil stains
• Recoat in 2 hours
• Suitable for interior and exterior use
Pascol Decorative Colour Flakes enhance the appearance of your concrete surface while masking any slight imperfections and deliver a polished and eye-catching look. PASCOL COLOUR FLAKeS
• Use in conjunction with Pascol 1-Part Epoxy Paving Paint & Multi-Purpose Sealer
• Over 100 colour combinations
• Suitable for interior and exterior use
Top TipCan be used over Pascol Semi-Transparent Stain or 1-Part Epoxy Paving paint
WateR Based
Gloss fiNisH
Create a designer lookDecorative Colour Flakes
Blue Mix Tan Mix Granite Mix
hINTS & TIPS Surface Preparation: Correctly preparing the surface is the most important step when using Pascol Paving and Concrete Paints. This is an integral part of the process that will allow you to achieve an amazing, long-lasting finish. It is crucial that you adhere to all the detailed instructions on the label before you start the project.
New Concrete: New concrete surfaces must be left to cure for at least four to six weeks before applying Pascol Paving and Concrete Paints.
Previously Painted Concrete:
• Pascol Paving and Concrete Paints can be applied to concrete surfaces that have been previously painted. Following the instructions provided on the label will guarantee your chosen surface is in a perfect state to be repainted.
• All loose, peeling or flaking material must be removed before application. Sand gloss or semi-gloss enamel surfaces until gloss is removed.
Application Information:
• When painting the surface it is imperative not to apply too much at once. Adhere to the coverage level on the label to achieve the best result. Remember two coats of paint are better than one thick layer.
• When applying paint it is best to work in section of 1 to 2 square metres at a time.
• Depending on whether you are working in cooler or humid climates, allow the paint to dry for longer periods. In some cases allow for double the allocated drying time.
• To guarantee the correct consistency of paint colour throughout the applying process, box and combine your required amount of paints that will be needed to complete the project.
• Avoid painting driveways and paths during the heat of the day, as this may prevent penetration and adhesion of the paint.
CO
NC
Re
Te
mA
SON
RY
gA
RA
ge
FLO
OR
S
DR
Ive
WA
YS
PATh
S
PATI
OS
INTe
RIO
R F
LOO
RS
BR
ICK
PO
OL
De
CK
S
PAv
eR
S
STe
PS
Ag
gR
eg
ATe
FLA
gST
ON
e
SLA
Te
Pe
BB
LeC
Re
Te
mO
RTA
R
Concrete Surface Preparation
Bond-Lok * * * * * * * * * * * * * *Paving Paints
1-Part epoxy Paving Paint * * * * * * *
Solid Colour Paving Paint * * * * * * * *
Non-Slip Paving Paint * * * * * *Decorative Concrete Finishes
Semi-TransparentConcrete Stain * * * * * * * * *
etching Stain & Sealer * * * * *Clear & Waterproof Sealers
multi - Purpose Sealer * * * * * * * * *
Wet Look Sealer * * * * * * * * * *
Natural Look Sealer * * * * * * * * * * *
Pascol Products Usage GuideSurface Preparation
Anti-Skid option
The key to a successful project
The BOND-LOK ADvANTAgeSelected Pascol products contain technologies that work to maximize the bond between the floor coating and the concrete. This bond extents the life of your finish, giving you maximum durability.
To obtain the best results be sure to use Pascol Oil Stain Remover to lift stains without scrubbing or Pascol Bond Lok to clean, etch and degrease your concrete before you begin.
PASCOL OIL STAIN RemOveR
• Absorbs and lifts stains from concrete without scrubbing
• Pour on and brush off
• Cleans away stains and oil spots prior to painting or sealing
PASCOLBOND•LOKTm
• Cleans, degreases and etches concrete
• Improves penetration & adhesion of paints & sealers
• Provides maximum durability of top coat
PASCOL ANTI-SKID FLOOR TeXTURe ADDITIve
For steps, pool areas, floors & porches.
Anti-Skid Floor Texture Additive will not change the colour, properties or performance of the coating. Particularly valuable in areas used by children and the elderly, or areas subject to wet conditions.
• Add Pascol Anti-Skid Floor Texture Additive to increase traction and provide a skid resistant surface
Product Range
Code: CCPA019/PAS13
PASCOL OIL STAIN RemOveR Absorbs & lifts stains from concrete without scrubbing
PASCOL BOND-LOKCleans, degreases and etches
PASCOL 1-PART ePOXY PAvINg PAINT For concrete or masonry garage floors, driveways, paths, patio & interior floors
PASCOL SOLID COLOUR PAvINg PAINTFor concrete, brick, pavers, masonry, pool decks, driveways, paths & patios
PASCOL NON-SLIP PAvINg PAINTFor concrete,masonry, steps, patios, paths & pool decks
PASCOL ANTI-SKID ADDITIveFor steps, pool areas, floors & porches
PASCOL COLOUR FLAKeS
PASCOL SemI-TRANSPAReNT CONCReTe STAIN For concrete, aggregate, brick, pavers, flagstone, pool decks, driveways, paths & patios
PASCOL eTChINg STAINFor concrete, pool decks, driveways, paths & patios
PASCOL eTChINg STAIN SeALeRFor concrete, pool decks, driveways, paths & patios
PASCOL mULTI-PURPOSe SeALeR For concrete, aggregate, masontry, brick, slate, garage floors, driveways, paths and patios
PASCOL WeT LOOK SeALeRFor pebblecrete aggregate, concrete, brick, pavers, masonry, slate, flagstone, driveways, paths & patios
PASCOL NATURAL LOOK SeALeRFor pebblecrete, exposed aggregate, concrete, brick, pavers, masonry, slate, mortar, flagstone, driveways & patios
PRePARATION PRePARATION
PAvINg PAINTS & ADDITIveS
DeCORATIve CONCReTe FINISheS
CLeAR & WATeRPROOF SeALeRS
For stockist information, product enquiries and technical advice please visit our website or call our Customer Service and Technical hotline.
Phone 132 101www.pascol.com.au
All printed colours have been matched as close to the actual paint colour as the printing process will allow. Slight variation in shades may occur. Photographic and printed images may not represent the true colour.
Pascol is a registered trademark of Wattyl Australia Pty. Limited. ABN 40 000 035 914
09/11