PARTS WASHERS

® North America’s LARGEST Manufacturer of Industrial PRESSURE WASHERS and PARTS WASHERS

SJ-15/10Top-Load Automatic Aqueous Parts Washers

with a Water-Propelled Spray Bar

n Up to 18" Working Height n 1-Year Warranty

n Patented Spray WashTechnology EliminatesNeed for Drive Motor,Gears, Pulleys, etc.

n Momentary SafetySwitch automaticallyturns off pump when lid isopened to protect opera-tor from hot-water spray.

n SJ-15’s extra large, 90-Gallon Tank, nearlytwice the capacity of comparable parts wash-ers, keeps water hotter and cleaner longer.

n Metal Chip Trays, located directly belowthe basket, retain heat in the cleaning solu-tion and prevent stray parts and large metalshavings from falling into the tank. Withoutthe trays, wash water would have to bedrained to retrieve stray parts.

n A Brush Brake stops spraybar from spinning when lid isopened to protect operator fromhot-water splash.

n Low-Water Shutoff valve turns off the unitif the tank solution level drops too low thusprotecting both the heating element andpump from damage; optional AutomaticWater Fill replenishes the tank.

n Cabinet is made of 14-GaugeSteel and is protected by a two-step liquid polyurethane paintsimilar to what’s used in theautomotive industry.

n Stainless Steel Strainer filters debris andsolids to as small as 0.008 inches, extendingthe life of the cleaning solution. Strainer is easy to remove and clean for reuse.

n Carbon graphite RotaryUnion with non-corrosiveseals and hardened stain-less steel pin provides reli-able rotation of spray arm.

n High-efficiency calrod HeatingElement is protected in anincoloy sheath for long life;Adjustable Thermostat, 50-175°F.

n Tri-Lingual Operat-ing Instructions andWarning Labels pro-vide owner liabilityprotection.

REGISTERED®

Since 1969

s With up to 23 precision spraynozzles on the water-propelledspinning Spray Bar, parts are hitfrom every angle and are nevermore than 18 inchesfrom thespray nozzlecreating aSurround Cleaning effect.

Made in USA

n Automatic 1-hour Wash Timerallows for unattended operation plusprotects against operator neglect; 7-day programmable Heater Timersaves energy by turning off heaterwhen not in operationfor long periods.

n Automatic discOil Skimmerremoves excessfloating oils fromsolution tank.

www.landa.com

s Time-tested, 3 HPVertical Seal-less Pumpdelivers a water flow of upto 37 GPM with less main-tenance than pumps used inconventional parts washers.

NOW WITH

AUTOMATEDOIL SKIMMER

AS A STANDARD FEATURE

Shown withoptional casterwheels andside-mountedtool tray

n Two side-mounted GasStruts make it easy to lockopen and close the lid withonly one hand.

n Highly efficient Ventdesign in the lid prevents anexcessive build up of steamfrom lifting the lid.

PARTS WASHERS

® North America’s LARGEST Manufacturer of Industrial PRESSURE WASHERS and PARTS WASHERS

SJ-15 / 10 Specifications

Basket Working Load Tank Pump Heating Dimensions ShippingPart No. GPM PSI Dimensions Height Capacity Capacity Electrical* Amps HP Element L x W x H Weight

SJ-15A 37 30 32" x 21" 18" 350 lbs. 90 gal. 230V 1ph 38 3 6 KW 48" x 53" x 49" 775 lbs.

SJ-15B 37 30 32" x 21" 18" 350 lbs. 90 gal. 230V 3ph 23 3 6 KW 48" x 53" x 49" 775 lbs.

SJ-15C 37 30 32" x 21" 18" 350 lbs. 90 gal. 460V 3ph 11 3 6 KW 48" x 53" x 49" 775 lbs.

SJ-10A 36 34 26" x 15" 15" 250 lbs. 69 gal. 230V 1ph 32 3 4.5 KW 42" x 47" x 46" 645 lbs.

SJ-10B 36 34 26" x 15" 15" 250 lbs. 69 gal. 230V 3ph 20 3 4.5 KW 42" x 47" x 46" 645 lbs.

SJ-10C 36 34 26" x 15" 15" 250 lbs. 69 gal. 460V 3ph 10 3 4.5 KW 42" x 47" x 46" 645 lbs.

*Models also available in both 208V 1 and 3ph configurations as well as stainless steel

Form #96-0202 • 1/04

Part No. DescriptionPK-100D Porta-Kleen for Processing Wastewater in SJ-15 and SJ-10200.616 Detail Brush with Pump (Factory installed)

200.162 Small Parts Basket (8"x8"x4")

200.605 Power Brush (Shop air required)

200.625 24-Hour Oil Skimmer Timer200.624 Tool Basket with tools200.626 Auto Water Fill200.263 Service Tray

OPTIONS: (SEE YOUR LANDA DEALER FOR A COMPLETE LIST OF OPTIONS)

WHY CHOOSE LANDA’s TOP-LOAD MODELSFor nearly a decade Landa has been putting a unique spin on automatic parts washing.

For example, in the mid-1990s, Landa patented a faster, moreeffective and more economical way to clean parts using a water-propelled spray arm that spins around a stationary parts basket.

LOW MAINTENANCE: Because the spray arm is pro-pelled by water, there is no need for a drive motor,gears, pulleys and other components that can createmaintenance headaches. Also its vertical seal-lesspump offers a low-maintenance solution.

CLEANS BETTER: The spray arm spins around the partsat a rate of up to 200 RPM delivering a constant blast to theparts. The precision spray nozzles (as many as 23 nozzles

on the SJ-15) are ideally positioned to blast parts fromall directions—all from less than 18 inches away—creating a virtual vortex of focused cleaning power.

AUTOMATED: A one-hour timer allows workers to leave thecleaning and return to their work. Plus, a seven-day timer ensures the water is hot

when it’s needed and saves energy when not in use.

Distributed by:

www.landa.com

Since 1969

U.S. Patents: No. D384446 & No. 6,109,277

SJ-15/10Top-Load Automatic Aqueous Parts Washers

with a Water-Propelled Spray Bar

n Up to 18" Working Height

n 1-Year Warrantyn Patented Spray Wash

Technology EliminatesNeed for Drive Motor,Gears, Pulleys, etc.

FOR BESTRESULTS USE

LANDADETERGENTS

ONLY

PARTS WASHERS

®