PACKAGING SPECIFICATIONS
Version 7 – June 2016
Prepared by Packaging Compliance
Authorised by: Graham Bingham, GM Distribution Network
Page 2 of 19
Table of Contents
PACKAGING SPECIFICATIONS 1
TABLE OF CONTENTS 2
1 INTRODUCTION 3
2 LEVELS OF PACKAGING 4
3 BARCODING 5
a) Each (EA) ................................................................................................................................................. 5
b) Inner (INN), Outer (OUT), Shipper(SHI) ................................................................................................ 6
c) Pallet (PAL) ............................................................................................................................................... 6
3.2 Barcode colour spectrum ............................................................................................................... 7
3.3 Allocating barcode numbers ......................................................................................................... 8
3.4 Allocating barcode numbers to a printed publication (books, manuals, magazines
and guides)........................................................................................................................................ 8
3.5 Generating a 14 digit logistics barcode number from 12 digit retail barcode number .... 9
3.6 Generating a 14 digit logistics barcode number from 13 digit retail barcode number .... 9
3.7 When to change a retail barcode number ................................................................................ 9
3.8 When to change the trade unit barcode number .................................................................... 9
4 LABELLING 10
4.1 Retail labelling ................................................................................................................................. 10
4.2 Trade unit labelling ......................................................................................................................... 11
4.3 Kitting requirements ....................................................................................................................... 12
4.4 Warning labels ................................................................................................................................. 14
4.5 General compliance markings .................................................................................................... 15
5 PACKAGING 16
5.1 Different methods of packaging ................................................................................................. 16
5.2 Packaging requirements ............................................................................................................... 16
5.3 Packaging to avoid ....................................................................................................................... 16
5.4 The Australian Packaging Covenant (APC) .............................................................................. 16
5.5 SSCC .................................................................................................................................................. 18
Page 3 of 19
1 Introduction
There are many benefits to be gained by all participants from an efficient and effective Supply
Chain. The full extent of the benefits will not be realised unless Super Retail Group (SRG) and its
Trade Partners are aligned throughout the supply chain.
To be aligned, fundamental processes and standards must be established, understood and
applied. There are three 'Core Competencies' that SRG‟s Trade Partners should be compliant with
from a supply chain perspective:
1. Barcoding
2. Labelling
3. Packaging
This specifications document is to be used as a reference tool when preparing products for delivery
to SRG. This document will specify the requirements around barcoding, labelling and packaging.
These requirements are based on industry standards, GS1 global standards and industry practices.
Packaging specification queries should be directed to: [email protected]
Page 4 of 19
2 Levels of packaging
EACH
(EA)
An item intended for
sale to the consumer at
the point of sale.
Quantity = 1 unit
INNER
(INN)
A level of packaging
that is contained inside
an outer or shipper. An
inner can only exist if an
outer is used.
Quantity = 6 units
OUTER
(OUT)
A level of packaging
that may contain
multiple inners or retail
units and can be
packed in multiples
inside a shipper.
Quantity = 24 units
SHIPPER
(SHI)
A level of packaging
that contains multiple
outers.
Quantity = 48 units
LAYER
(LAY)
A single layer of cartons
spread over the surface
area of a pallet.
Quantity = 288 units
PALLET
(PAL)
A level of packaging
containing lower levels
of packaging.
Quantity = 864 units
Page 5 of 19
3 Barcoding
a) Each (EA)
There are two scenarios in which a retail barcode can be displayed on an INNER or OUTER:
Inners, outers and shippers, also referred to as “trade units”, and can be designed to be
sold at the retail level.
The retail unit is too large/heavy to pack multiples into another level of packaging.
Requirement
(symbology, example image,
magnification min and max)
GTIN breakdown Location
EAN - 8
Retail environment = 80%
Supply chain environment = 200%
93 27303 9
GS1 Prefix
Item reference
Check digit
Displayed in such a
way that the bar
height is not reduced
(truncated), the
magnification meets
the minimum and
does not exceed the
maximum, and the
light margins are not
encroached on by
any wording, logos, or
colouring.
Away from packaging
flaps, seams, ripples
and undulations.
Away from corners of
blow-mould cases and
not hidden behind the
product.
On a smooth flat
surface and should
not fold over edges.
UPC-E
Retail environment = 80%
Supply chain environment = 200%
01 24013 6
GS1 Prefix
Item reference
Check digit
EAN-13
Retail environment= 80%
Supply chain environment = 150% -
200%
932730311 071 9
Company prefix
Item reference
Check digit
UPC-A
Retail environment = 80%
Supply chain environment = 150% -
200%
04364566 448 0
Company prefix
Item reference
Check digit
Page 6 of 19
b) Inner (INN), Outer (OUT), Shipper(SHI)
GS1-128
Supply chain = 50% -100%
(01) 1 932730311071 6
AI
Indicator
First twelve digits of the EAN-13
Re-calculated check digit
(01) 10 04364566448 7
AI
Indicator plus a filler zero
First twelve digits of the UPC-A
Re-calculated check digit
Adjacent sides (minimum,
short and long).
Recommended for
automated scanning –
19mm from the edge and
32mm from the base.
Barcodes should be
displayed on two opposite
sides if adjacent cannot
be achieved (horizontal
not vertical).
Retail barcode should not
be visible/scannable, nor
should it be facing
outwards if in a plastic
package.
ITF-14
Supply chain = 50% -100%
1 932730311071 6
Indicator
First twelve digits of the EAN-13
Re-calculated check digit
10 04364566448 7
Indicator plus a filler zero
First eleven digits of the UPC-A
Re-calculated check digit
Note: Bearer bar recommended
but not mandatory
c) Pallet (PAL)
SSCC labels can be applied to pallets for DC delivery or cartons if delivery contains 4 cartons or less.
SSCC
Supply chain = 48.7% - 92.5%
(00) 0 061414112 3456789 0
AI
Extension digit
Company prefix
Serial reference
Check digit
Note: AI is not part of the check
digit calculation
Carton - Recommended
for automated scanning –
19mm from the edge and
32mm from the base.
Pallet - Placed at a height
between 400mm and
800mm from the surface
on which the pallet stands
and no closer than 50mm
from the vertical edge.
Picket fence orientation.
Page 7 of 19
3.2 Barcode colour spectrum
The barcode does not have to be black and white, but by using other colours, this reduces the
tolerance that the barcode has to other flaws and can increase the chance of the barcode failing
other GS1 standards.
The preferred colour for any barcode is matt black bars on a solid matt white background. Colours
in the red spectrum are not suitable at all because scanners use a red light and as a result, will see
the bars as neutral. The white background includes the light margins.
Page 8 of 19
Figure 1: Barcode locations on cartons
3.3 Allocating barcode numbers
It is required that all products sold through Super Retail Group display a barcode number with a
unique company prefix obtained from GS1. This will ensure that the barcode numbers used are
registered and solely owned.
When submitting new line data every retail unit and trade units (inners, outer and/or shippers)
should have unique barcode numbers provided by the Trade Partner.
For private branded products, merchandising team will be providing SRG GTINs to the Trade
Partners for use on private branded products.
When purchasing from a barcode on-seller there is a high possibility that the barcode numbers you
have purchased are still being used by a GS1 registered company. If a different business decided
to obtain GS1 membership and the barcode numbers that you are currently using were assigned to
them by GS1 then they are legally entitled to use them.
3.4 Allocating barcode numbers to a printed publication (books,
manuals, magazines and guides)
You do not need to use a separate GS1 company prefix. To allocate a GTIN you need to identify
your ISSNs or ISBNs as they can be used as the basis of a GTIN barcode. When allocating for the first
time, it may be best to consult with GS1 directly on 1300 227 263 or via their website
www.gs1au.org/products/gs1_systems/allocating_numbers
Figure 2: Magazine cover with appropriate ISSN barcode.
Page 9 of 19
3.5 Generating a 14 digit logistics barcode number from 12 digit retail
barcode number
Begin with the retail UPC-A barcode 898639001518
1. Drop the check digit 898639001518 = 89863900151 (now 11 digits)
2. Add a filler zero at the beginning of the number = 089863900151 (now 12 digits)
3. Add the leading variant (1-8) = 2089863900151 (now 13 digits)
4. Use the online calculator to generate the new check digit = 20898639001512 (now 14 digits)
3.6 Generating a 14 digit logistics barcode number from 13 digit retail
barcode number
Begin with the retail EAN-13 barcode 9327303099588
1. Drop the check digit 9327303099588 = 932730309958 (now 12 digits)
2. Add the leading variant (1-8) = 2932730309958 (now 13 digits)
3. Use the online calculator to generate the new check digit = 29327303099582 (now 14 digits)
Note: When adding a leading digit the general rule is to use “1” for an inner level of packaging
and “2” for an outer.
3.7 When to change a retail barcode number
Generally a separate unique GTIN is required for every new version of a trade item and for every
variation of a retail item. However there are cases when a GTIN does not need to be changed. The
following link outlines the requirements and recommendations from GS1 - www.gs1.org/gtinrules
Do not re-use a deleted GTIN until a minimum of four years after the date that you last
issued the item into the market place. (If companies wish to extend the period of time
before a GTIN is re-used, beyond the minimum of four years, this is acceptable.) This
includes any GTIN, no matter what level of packaging it relates to.
3.8 When to change the trade unit barcode number
Typically the trade unit barcode only needs to be changed whenever the retail barcode is
changed.
There is a circumstance where the trade unit barcode does need to be changed when the retail
barcode does not. For example, if the content quantity changes in the trade unit then the trade
unit barcode number must also be changed.
Page 10 of 19
4 Labelling
4.1 Retail labelling
Product description (detailed – including all variants)
Retail barcode
Gross weight (kg) if product weighs 10kg or over
Applicable warning label (this includes the shipper)
Recommended (in addition to the above labelling requirements)
Brand
Part number (should be the same as the one that is displayed on the trade unit and the
same as SRG uses to order the stock)
Kitting products (in addition to the above labelling requirements)
Kitting identifier (e.g. 1 of 2, 2 of 2)
Gross weight (kg) on each part if it weighs 10kg or over
Applicable warning label (this includes the shipper)
Note: Tick-box information should not be used.
Figure 3: Variety of products showing labelling. Weight warning labels must stand
out and be placed on all levels of packaging, e.g. shipping carton and unit
Page 11 of 19
4.2 Trade unit labelling
The following requirements must be printed (not handwritten) on adjacent sides of every level of
trade unit packaging:
SKU/PLU (SRG private branded products only)
Product description (includes product, variant and size as printed on the retail unit)
Total quantity of retail units within
Total gross weight of the trade unit (kg)
Warning labels if applicable (displayed close to the gross weight)
Advisory symbols or labels if applicable
Recommended
Part/style number (as printed on the retail unit)
Trade Partner details and/or Brand name
Mandatory labelling on the carton should be clearly readable when standing within a
one metre distance
Note: Labelling for plastic wrapped trade units to be displayed on two opposite sides if adjacent
cannot be achieved.
Directional stacking logos „THIS WAY UP‟ or
The optimum pallet stacking configuration on the top of the
trade unit (outer only)
Example:
Care directions if contents are fragile „HANDLE WITH CARE‟ or „FRAGILE‟ or
Figure 4: Labelling (shipping marks) with appropriate warning labels
Page 12 of 19
In addition to mandatory labelling outlined in section 4.2 the following should also be displayed on
import cartons:
Purchase order number
Country of origin
Carton count
SSCC (if applicable)
4.3 Kitting requirements
A typical example of a kit is a grouping of items such as part of a starter paint kit, or a BBQ that
comes in two or three separate packages.
EXAMPLE – BBQ that is broken into two separate parts – each carton containing one part.
Part 1 EACH (retail) barcode at 150% magnification
SKU/PLU (SRG private branded products only)
Product description (includes product, variant and size as printed
on the retail unit)
Brand
Total quantity of retail units within
Total gross weight of the trade unit (kg)
Warning labels if applicable (displayed close to the gross weight)
PART 1 of 2 (large preferably coloured)
Part 2 EACH (retail) barcode at 150% magnification (different to Part 1)
SKU/PLU (SRG private branded products only)
Product description (includes product, variant and size as printed
on the retail unit)
Brand
Total quantity of retail units within
Total gross weight of the trade unit (kg)
Warning labels if applicable (displayed close to the gross weight)
PART 2 of 2 (large preferably coloured)
Figure 5: Recommended import labelling
Page 13 of 19
Mark cartons as “MIXED SKUs” if there are multiple SKUs (PLUs/part numbers) per pallet/carton.
Remove pre-existing labelling and barcoding. Separate (bundle) SKUs and include gross
weight, and warning labels if carton falls into weight categories (refer Table Pg 14).
NOTE: No barcode required for a mixed SKU carton.
Mark cartons as “PARTIAL” if carton does not contain full quantity.
Amend the gross weight, quantity and place vertical ‘dark’ line through barcode,
preferably over white bar. This will ensure barcode reads invalid.
Figure 6: Two part pick with clear markings on each carton and unique retail/unit barcodes
Figure 8: Partial carton labelling
Figure 7: Mixed carton labelling
Page 14 of 19
4.4 Warning labels
Visibility is key:
Warning labels may be a black and white sticker or incorporated into the pre-printed
packaging design. Triangular versions may be acceptable.
When printing mono, direct to carton, include a solid border to highlight the warning.
Contrast may need to be added to aid visibility, therefore consider an alternate colour or
overprint, if necessary. SRG prefers fluorescent colours.
Warning labels must not cover any other shipping marks, labelling or barcodes.
Warning label images, both colour and mono, can be downloaded from SRG website.
In addition:
For products over 36kg, multiple packages should be considered.
BULKY labels are not to be used in conjunction with any other weight warning labels.
We recommend products/cartons over 1.2m display warning labels at alternate ends.
Warning Example Required Wording Applies To Description of Requirement
WARNING: BULKY
Consider two person lift or
mechanical aid
10kg and
180L or >
1. Warning labels must be
displayed on adjacent sides.
2. Must include handling
illustration/image.
3. Must include „Required
Wording‟ and “WARNING”
must be in bold as well as
the category that the
warning applies to.
4. Weight warning category
should be kept as narrow as
possible (not 17 – 50 kg).
5. Should stand out from
existing labelling/artwork
(eg: fluorescent colours or
thick black border).
6. Minimum width is 90mm
(standard business card
90mm x 55mm).
WARNING: 17 – 35 kg HEAVY
Consider two person lift or
mechanical aid
17 – 35 kg
WARNING: 36 – 50 kg VERY
HEAVY
Two person lift or mechanical
aid required
36 - 50 kg
WARNING: 51+ kg EXTREMELY
HEAVY
Team lift or mechanical aid
required
51 kg or >
Page 15 of 19
4.5 General compliance markings
Other labelling that may be required is based on the relevant legislation for that product and could
be in addition to SRG requirements. This may include, but is not limited to, Dangerous Goods
diamonds and directions, or medical and environmental advice. Most compliance marking that
must be included in packaging is product specific and is too broad ranging to address here.
All products supplied to the SRG of companies must comply with all relevant Commonwealth and
State legislation including the relevant product safety and information standards. It must be
emphasised that any “claim” on the product is supported by the appropriate facts, for example, if
packaging claims to be “recyclable” we should be able to support these claims.
Imported goods should carry country of origin information in English, in prominent and legible
characters. Where products are imported from countries not using metric measurements e.g. US
and in some instances UK, units of measurement should be changed to metric from the imperial. If
a product has been identified as Dangerous Goods, it must carry information about the volume of
the contents, not just the volume of the packaging.
All products supplied to our SRG of companies for distribution in New Zealand must comply with all
relevant New Zealand legislation including the relevant product safety and information standards.
To find out about product safety and information standards refer to the appropriate government
departments or applicable standard.
Page 16 of 19
5 Packaging
5.1 Different methods of packaging
Hang sell (e.g. Clam shell, blister pack)
Cardboard
Plastic bag/poly bag/plastic wrap
o Recommend red, black or opaque plastic bags. Retail barcode must not be visible
from the next level of packaging if a clear bag is used. This can be achieved by
facing the last retail barcode back to back or placing a card of coloured paper at
the back to stop the retail barcode being scanned.
5.2 Packaging requirements
Should be designed to protect the product and those that need to handle it.
o It will not deform or collapse from the weight of its own contents when lifted.
o Handles are to be used where appropriate.
o Sharp items must have a durable protective shield over the sharp tip/edge within
the retail packaging to protect against personal injury.
Minimise the potential for theft, tampering, and components becoming loose.
o The contents are easily accessible when required, yet will not open unexpectedly.
Able to display all mandatory information – swing tag to be used if required (retail only)
Be tailored to the shape of the contents to minimise the contained air space.
Account for potential exposure to moisture during transport/storage.
It is sufficiently robust and stable when stacked in a container or on a pallet.
5.3 Packaging to avoid
Metal staples
Padding or packing peanuts
Metal straps are not to be used
5.4 The Australian Packaging Covenant (APC)
The SRG is a signatory of the Australian Packaging Covenant (APC) which was previously referred
to as the National Packaging Covenant (NPC). This enlistment requires our company to meet
certain Key Performance Indicators (KPIs) under the covenant which relate to packaging design,
packaging recycling and product stewardship. Upon becoming signatories we have made several
commitments that are publicly viewable in our Action Plan on our corporate website
www.superretailgroup.com/about-us/our-community-and-environment
Page 17 of 19
As a part of these commitments Trade Partners producing products for the group under private
brand names will be required to adhere to the APC‟s Sustainable Packaging Guidelines (SPG),
which is available on our corporate website www.superretailgroup.com/working-with-us/
The guidelines assist the design, manufacture and end-of-life management of packaging and
advise companies about the issues they need to consider when reviewing their packaging to make
it more sustainable.
The SRG urges all Trade Partners to comply with the SPG in order to reduce the possible impact our
products have on our community and our environment.
For private brand retail units the following labelling is required:
If the packaging, or any part
of the packaging, is
recyclable one of the
following logos must be used
In case only some part of packaging
is recyclable, a qualifying statement
must be presented below the
recycling symbol
In case the product is
recyclable
Figure 9: Recycling symbols with qualifying statements
If the cardboard has been sourced from a renewable resource this should be noted, for example a
source certified by the Forest Stewardship Council (www.fscus.org). If plastic is used, it should
always be a recyclable type and display a recycling logo that indicates which type to help
responsible disposal.
Due to our Australian Packaging Covenant commitments as stated in the previous section, private
brand retail units are required to:
Have their packaging sourced from recycled products as much as possible.
Use packaging that is fully recyclable.
Endeavour to produce packaging that is not disposed of upon purchase and maintains
a useful role in the life of the product.
Use renewable resources where the use of recycled packaging isn‟t feasible (with
legitimate certification, such as the Forest Stewardship Council, www.fscus.org).
Page 18 of 19
5.5 SSCC
The company responsible for marking the logistic unit is responsible for issuing the SSCC.
The SSCC can be reused once 12 months has elapsed, from the time of issue, providing the original
logistics unit is no longer in existence.
The delivery labels should be located so the lower edges of the SSCC vertical bars
(lowest barcode on the label) are exactly 32mm from the base of the carton. The label
should be positioned so that no part of the barcode (including light margins) is less than
19mm from any vertical edge of the carton.
Barcode must be printed in picket fence orientation.
A6 minimum size of label.
SSCC to be placed next to any relevant pre-existing labelling/barcodes.
Figure 10: Location of delivery label (with SSCC) on a shipping carton to GS1 standards
Figure 11: Location of delivery label (with SSCC) to GS1 standards on an outer carton with the unit
already marked with a pre-existing barcode for a unique SKU/product
Page 19 of 19
For all pallets the logistics labels should be located between 400mm and 800mm from
the surface on which the pallet stands and no closer than 50mm from the vertical edge.
Barcodes shall be in picket fence orientation (bars and spaces should be perpendicular
to the base). For the actual label, the standard A6 format (105mm x 148mm) is sufficient
for most requirements, but this can be made smaller as shown in the example.
Please refer to the Supply Chain links for Super Retail Group Terms and Conditions - Distribution
Centres and/or the EDI Trade Partner Information Guide from the Group website.
Figure 12: Location of the logistics (pallet) label