11.5.20162
• Powerful 32 bit processor
• High calculation power
• Can be used as a calculating unit and/or as
remote access unit
• CODESYS 3.5 programmable
• Displays
• Bright and colorful panel
• High brightness and contrast
• Wide viewing angle
6100 Remote Access Unit
6107Display
6112Display
Processor 32 bit / 792 MHz 32 bit / 792 MHz 32 bit / 792 MHz
Memory * Flash 4-16 GB RAM 1024 MB NV memory 512 kB
Flash 4-16 GB RAM 1024 MB NV memory 512 kB
Flash 4-16 GB RAM 1024 MB NV memory 512 kB
OS Linux Linux Linux
Protection Class IP66 IP66 IP66
Connectors 1 x AMP231 x mini-B USB (M12) 1 x M12 0-2 x SMA antenna connector
1 x AMP231 x mini-B USB (M12) 2-4 x M12 0-2 x SMA antenna connector
1 x AMP231 x mini-B USB (M12) 2 x M12 2 x SMA antenna connector
11.5.20163
*Memory sizes are hardware specific
6100Remote Access Unit
6107Display
6112Display
CAN 2.0 B 2 2 2
RS-232 1 1 1
USB 2 2 2
Ethernet (10/100 Mbps) 2 0 – 2 2
GSM/UMTS/HSPA +/GPS/GLONASS
Yes Yes * Yes *
Camera * No 2 * 2 *
Mini-SIM Yes Yes * Yes *
Wifi/BT * Future releases Future releases Future releases
Ext. Display * Future releases Future releases Future releases
11.5.20164
*Optional
6100Remote Access Unit
6107Display
6112Display
Operating Temperature -30... +70 ° C -30... +70 ° C-30... +55 °C with
2G/3G/GPS option
-30... +70 °C
Operating Voltage 12/24 VDC,Full Range 8,4 ... 36 VDC
12/24 VDC,Full Range 8,4 ... 36 VDC
12/24 VDC,Full range 9,2 ... 36 VDC
Undervoltage Reset ≤ 8 VDC ≤ 8 VDC ≤ 8,5 VDC
Power Consumption 90 W (+24 VDC, full load)40 W (+24 VDC, typical)
100 W (+24 VDC, full load)50 W (+24 VDC, typical)
-
Display No Yes Yes
Speaker / Buzzer No Yes (Speaker) Yes (Buzzer)
RTC (Real-Time Clock) Yes Yes Yes
11.5.20168
6107Display
6112Display
Display Size 7” TFT color LCD
12,1”TFT color LCD
Touch Screen Resistive (GFG) Capacitive (PCAP)
Resolution WVGA 800 x 480 (5:3) XGA 1024x 768 (4:3)
Colors High color, 65 536 colors (16 bits) High color, 65 536 colors (16 bits)
Backlight LED, lifetime 70 000 hours at 25 °C LED, lifetime 50 000 hours at 25 °C
Brightness 800 cd/m2 600 cd/m2
Brightness Control Manual/automatic LED backlight control Manual LED backlight control
Contrast 600:1 700:1
Viewing angle 170° (super wide) 160 ° vertical140 ° horizontal
11.5.20169
• 2 x CAN 2.0 B
• Supported bit rates
• 50, 125, 250, 500, 800 and 1000 kbit/s
• Both 11 and 29 bit message IDs supported
• RTR (Remote Transmission Request)
supported
• User programmable. Epec provides
implementations for CANopen and SAE
J1939 protocols.
11.5.201610
• Operating voltage range
• 8,4…36 VDC (6100, 6107)
• 9,2…36 VDC (6112)
• Undervoltage threshold level
• ≤ 8 VDC (6100, 6107)
• ≤ 8,5 VDC (6112)
• Max total current 6A
• GND current sum max 6A
11.5.201611
• Overvoltage protection
• Supply voltage > 36,8V, the display unit
shuts down
• Starts again when voltage drops under 36,8V
• Withstands continuous voltage up to 70V
• Withstands transient voltage peaks up to 123V
without damage to the display
• Load dump protection according to ISO7636-
2: 2004 pulse 5, Us=+123 V
11.5.201612
• Outputs (PWM/DO/DI) have a switching
element called smart FET
• It has integrated features to protect itself
and also the external pin, wiring and
actuator
• It is recommended to use
DigitalOutputDiagnostics library function
blocks for additional protection when
output is used as DO.
11.5.201613
• A switch will disconnect the
measurement circuit if an
overvoltage event is
detected
• Overvoltage protection
mode is indicated with a
dedicated signal
• The protection mode is
active as long as the
overvoltage persists or it is
momentarily bypassed via
application
11.5.201614
11.5.201615
Inputs 2 DI Pull-down resistor to ground
1 AI - Mode selection by application (0..5 V / 0..22 mA)- Pull-up selection by application
Outputs 2 DO/DI - Sourcing- Output state monitoring feature (DI)- Current output 1A/pin
1 REF out +5V / 100mA
• Supply voltage
• Internal temperature
• Reference voltage overload and
overvoltage
• Application cycle time
• CAN network status
11.5.201616