Download - Modu Tek Catalog
TEKNO ALUMINUM VS. STEEL
♦♦♦♦♦ There is no welding required!
♦ ♦ ♦ ♦ ♦ Our hard anodized extruded aluminum does not rust or corrode, so no painting is necessary, EVER!
♦♦♦♦♦ Extruded aluminum beam profiles are designed to be lightweight whilemaintaining exceptional high strength characteristics.
♦♦♦♦♦ Modu-Tek aluminum beam profiles are T-slotted for ease and speed ofassembly.
♦♦♦♦♦ Only three simple hand tools (1/2” wrench, 5/32” Allen Wrench, and a StandardTape Measure) are required to build structural systems.
♦♦♦♦♦ Structures built from Modu-tek aluminum beam can be quickly reconfigured toincorporate design changes.
♦♦♦♦♦ Extruded aluminum beams are are easily expanded or altered to meet therequirements of any on-going project.
♦♦♦♦♦ Additional components and accessories are simple to add at any time.
WHY TEKNO?♦♦♦♦♦ Tekno has the most competitive pricing in the industry. When the overall cost
of completing a project from start to finish are evaluated, Tekno is the trueleader in the price war.
♦♦♦♦♦ Tekno’s components do not require drilling, tapping, or counterboring; savingtime, expense, and labor.
♦♦♦♦♦ Tekno offers a wide variety of hardware to meet every design requirement.
♦♦♦♦♦ Tekno’s extruded aluminum profiles are T-6 grade...the strongest in theindustry!
♦♦♦♦♦ Because our Modu-Tek components were designed with the assemblyprocess in mind, absolutely no other product is faster or easier to assemble.
...but we don’t want you to simply take our word for it...
We want you to let us prove it.
TEKNOTYPICAL ASSEMBLIES
Standard fastening method when joining a 1x1 SlotSupport Beam perpindicular (90 deg.) to another.
High load capacity fastening method whenjoining a 1x1 Slot Support Beam perpindicular(90 deg.) to another. This method should beused when the structure is to be exposed toconsiderable vibration.
Standard fastening method when joining a 1x1 SlotSupport Beam at a 45 deg. angle
High load capacity fastening method whenjoining a 1x1 Slot Support Beam at a 45 deg.angle. This method should be used when thestructure is to be exposed to considerablevibration.
TEKNO
Standard fastening method when mounting a1x1, 1x2, or 1x3 Slot Support Beamperpindicularly (90 deg.) to a 1x1 Slot SupportBeam in cross beam applications.
High load capacity fastening method when mounting a 1x1,1x2, or 1x3 Slot Support Beam perpindicularly (90 deg.) to a1x1 Slot Support Beam in cross beam applications. Thismethod should be used when the structure is to be exposedto considerable vibration.
Standard fastning method when joining 1x1,1x2, and 1x3 Slot Support Beams to oneanother at a perpindicular (90 deg.) angle.
High load capacity fastening method when mount-ing 1x1, 1x2, and 1x3 Slot Support Beams to oneanother at a perpindicular (90 deg.) angle. Thismethod should be used when the structure is to beexposed to considerable vibration.
TYPICAL ASSEMBLIES
TEKNO
Standard fastening method when joining 1x1, 1x2,and 1x3 Slot Support Beams to one another at a 45degree angle.
High load capacity fastening method when mount-ing 1x1, 1x2, and 1x3 Slot Support Beams to oneanother at a 45 degree angle. This method shouldbe used when the structure is to be exposed toconsiderable vibration.
Fastening method for building a clean, stableframework corner from two Support Beams matedend-to-end at a 30 degree mitered joint. The endsof the beams should be cut at 15 degrees to formthe 30 degree mating angle.
Fastening method for building a clean, stableframework corner from two Support Beams matedend-to-end at a 90 degree mitered joint. The endsof the beams should be cut at 45 degrees to formthe 90 degree mating
TYPICAL ASSEMBLIES
TEKNO
An alternative fastening method for building aclean, stable 45 degree framework corner fromtwo Support Beams mated end-to-end or end-to-side. Each end of the two beams can be cutat 22.5 degrees to form the 45 degree matingangle, or one beeam can be cut at 45 degreesand fastened along the side of the adjoiningbeam, allowing lateral positioning of the miteredbeam anywhere along the lenght of the otherbeam.
An alternative fastening method for building aclean, stable 90 degree framework corner fromtwo Support Beams mated end-to-end or end-to-side. Each end of the two beams can be cutat 45 degrees to form the 90 degree matingangle, or one beam can be cut at 90 degreesand fastened along the side of the adjoiningbeam, allowing lateral positioning of the miteredbeam anywhere along the length of the otherbeam.
Assembly of 1x1 slot Fixed Foot to 1x1 SlotSupport Beam leg.
1x1 Teardrop Leveling Foot Assemnly specificallydesigned for mating with 1x1 Slot Support Beamlegs.
TYPICAL ASSEMBLIES
TEKNO
All Metal Leveling FootAssembly with 1/2”-13 Stemspecifically designed for matingwith 1x1 Slot Support Beamlegs.
Leveling Foot Assembly with1/2”-13 Stem designed for lightduty support applications suchas benches and tables.
1x1 Slot Rigid CasterAssembly mounts to the endof a 1x1 Slot Support Beam toprovide fixed caster moblility.
1x1 Slot Swivel Caster Assembly with Brake mountsto the end of a 1x1 Slot Support Beam tp provide“brakeable” swivel caster mobility.
1x1 Slot End Caps are used to cover exposedends of 1x1 Slot Support Beams and to presenta clean, finished look to complete structures.
TYPICAL ASSEMBLIES
TEKNO
T-slot Covers are used to cover open T-slots. T-slotcovers can be used to hold individual cables and airlines in position within the T-slot cavity, thus preventingdamage and/or injury by reducing exposure of the linesand cables.
The Panel Clamp T-Slot insert is used in guardsand enclosures to secure polycarbonate panels inplace within extrusion T-slots.
Top and Bottom 2-Panel Door Slides used inconjunction hold and guide two sliding panelsbetween two parallel beams.
Fastening method for attaching Expanded Mesh and/or Black Plastic Coated Wire Mesh Paneling toSupport Beam extrusions in guards and enclosures.
TYPICAL ASSEMBLIES
TEKNO
Fastening method for attaching solid Plastic/Polycarbonate Paneling to Support Beam extrusionsin guards and enclosures.
Handle Assembly used on sliding panels,doors, and access hatches.
Handle Assembly used when mounting handle toextrusion T-Slots.
Hinge Assembly for doors and swing-out orpivoting structures.
TYPICAL ASSEMBLIES
TEKNO
Hinge Assembly for doors, panels, and swing-out or pivoting structures that provides eitherfree or dampened door swing motion throughadjustment.
Lift-off Hinge Assembly for doors and swing-out orpivoting structures that allows quick and easy doorremoval.
Handle Assembly used to latch and lock doorson cabinets and guarding enclosures.
Magnetic Catch Assembly latches panels in place.Ten punds of force is required to break contactbetween the magnet and striker plate.
TYPICAL ASSEMBLIES
TEKNO
Table Of Contents
1. T-Slotted Extrusions
2. Brackets
3. Adapter/Joining Plates
4. Strap Nuts & Joiner Strips
5. Support Feet & Casters
6. Assembly Hardware
7. Beams & Caps
8. Electrical Components
9. Accessories
10. Additional Products & Services
TEKNO 1-1T - SLOTTED EXTRUSIONS
Support Beams
Tri-Slot Support Beam(1.31 in x 1.00 in)
E0100101Page 1-5
2 x 3 Slot Support Beam(2.50 in x 3.38 in)
E0100601Page 1-10
1 x 1 Slot Support Beam(1.63 in x 1.63 in)
E0100201Page 1-6
1 x 3 Slot Support Beam(1.63 in x 3.38 in)
E0100401Page 1-8
3 x 3 Slot Support Beam(3.38 in x 3.38 in)
E0100701Page 1-11
Snap-on Guide RailE0800121Page 1-14
Guide Rail
2 x 2 Slot Support BeamE0100501
(2.50 in x 2.50 in)Page 1-9
1 x 1 Cross Beam (1.75 in X 1.00 in) E0100801 Page 1-12
1 x 2 Slot Support Beam(1.63in x 2.50 in) E0100301 Page 1-7
Lift Extrusion
Lift Extrusion E1200121 Page 1-13
TEKNO1-2T - SLOTTED EXTRUSIONS
Material Specifications:
Material:6063-T6 Aluminum Alloy
Surface Finish:201 R1 Clear Anodize, 150 RMS with an applicationdepth of 0.001 in - 0.002 in [0.025 mm - 0.051 mm]
Yield Strength:25,000 lbs/in2 [1,758 kg/cm2]
Tensile Strength:30,000 lbs/in2 [2,109 kg/cm2]
Elongation:Maximum of 12% in 2.0 in [50.8 mm] of length
Modulus of Elasticity:10 million lbs/in2 [703,100 kg/cm2]
Brinell Hardness(500 Kg. Load, 10mm Ball):Approximately 73 HB
Straightness:0.0125 in/ft [0.1042 cm/m2], not to exceed 0.25 in[0.64 cm] over a 20 ft [6 m] length.
Twist:1/4° per foot, not to exceed 3° over a 20-foot length.
INTRODUCTIONThe information on this page
pertains to all T-Slotted Extrusions.
TEKNO 1-3T - SLOTTED EXTRUSIONS
L
W
Y
L
W
Y
W
Y
L
CASE 1:
CASE 2:
CASE 3:
T-Slotted Extrusion Load Data:
Typical Load Conditions(see illustrations at right):
• CASE 1: The extrusion is fixed at one end, with adownward load on the other end.
• CASE 2: The extrusion is supported at both ends,with a downward load on the center.
• CASE 3: The extrusion is fixed at both ends, with adownward load on the center.
Notes on Load Conditions:
• CASE 1 cantilever simulates a 5.0 ft [1.5 m] beamspan, while CASES 2 & 3 simulate a 10.0 ft [3.0 m]beam span.
• Gravity was applied, but the results do not accountfor the deflection caused by the weight of each beam.
• The force (W) is applied at the end of the 5.0 ft [1.5m] beam section in CASE 1. The force (W) is appliedat the center of the beam for CASES 2 & 3.
• Maximum stress for each case and each cross-section are shown in the Von Mises Stress Data tableat the right. Maximum deflections are shown on thetable on the next page.
• A diagram detailing “Load 1” and “Load 2” applied toE0400201 s also on the next page.
Part N o . C ase 1 C ase 2 C ase 3
50 2 50 50 0 50 2 50 50 0 50 2 50 50 0 Lb s. F orce
E0100201 8696 43478 86957 4348 21739 43478 2174 10870 21739 Stress(psi)
E0100301 4076 20380 40761 2038 10190 20380 1019 5095 10190 Stress(psi)
E0100401 2435 12175 24351 1218 6088 12175 609 3044 6088 Stress(psi)
E0100501 4115 20576 41152 2058 10288 20576 1029 5144 10288 Stress(psi)
E0100601 1848 9242 18484 924 4621 9242 462 2311 4621 Stress(psi)
E0100701 1519 7595 15190 759 3797 7595 380 1899 3797 Stress(psi)
E0100801 13636 68182 136364 6818 34091 68182 3409 17045 34091 Stress(psi)
E0200101 1024 5121 10242 512 2561 5121 256 1280 2561 Stress(psi)
E0200201 2540 12701 25402 1270 6351 12701 635 3175 6351 Stress(psi)
E0200301 1237 6186 12371 619 3093 6186 309 1546 3093 Stress(psi)
E0400101 467 2334 4668 233 1167 2334 117 583 1167 Stress(psi)E0400201 Load
1 850 4249 8499 425 2125 4249 212 1062 2125 Stress(psi)
E0400201 Load 2 1060 5398 10597 530 2649 5298 265 1325 2649 Stress(psi)
Stress Data
TEKNO1-4T - SLOTTED EXTRUSIONS
Notes:
TEKNOE0100101
Tri-Slot Support Beam1.31 in x 1.00 in
[33.27 mm x 25.40 mm]
Typical Uses:• Structural framework.• Cross supports.• Door and safety screen frames.
Features:• T-slots for modular assembly with T-bolts, Joiner Strips, and Square Nuts.
Material:6063-T6 Aluminum Alloy
Surface Finish:201 R1 Clear Anodize, 150 RMS with anapplication depth of 0.001 in - 0.002 in[0.025 mm - 0.051 mm]
Yield Strength:25,000 lbs/in2 [1,758 kg/cm2]
Tensile Strength:30,000 lbs/in2 [2,109 kg/cm2]
Cross Sectional Area (A):0.422 in2 [2.723 cm2]
Moments of Inertia:Ix: 0.043 in4 [1.790 cm4]Iy: 0.077 in4 [3.205 cm4]
Sectional Moduli:Wx: 0.084 in3 [1.377 cm3]Wy: 0.113 in3 [1.852 cm3]
Weight Per Foot:0.47 lb [0.21 kg]
Maximum Length Available:20.0 ft [6.1 m]
.
1-5T-SLOTTED EXTRUSIONS
1.31” [33.27mm]
0.81” [20.62mm]
1.00” [25.40mm]
TEKNO1-6T-SLOTTED EXTRUSIONS
E01002011 x 1 Slot Support Beam
1.63 in x 1.63 in[41.40 mm x 41.40 mm]
Typical Uses:• Structural framework.• Cross supports.• Door and safety screen frames.
Features:• T-slots for modular assembly with T-bolts,Joiner Strips, and Square Nuts.• Corner holes run throughout the length of theextrusion for the attachment of End Caps, EndPlate Brackets, Leveling Feet, and Casters.
Material: 6063-T6 Aluminum Alloy
Surface Finish:201 R1 Clear Anodize, 150 RMS with an applica-tion depth of 0.001 in - 0.002 in [0.025 mm -0.051 mm]
Yield Strength:25,000 lbs/in2 [1,758 kg/cm2]
Tensile Strength:30,000 lbs/in2 [2,109 kg/cm2]
Cross Sectional Area (A):1.018 in2 [6.568 cm2]
Moments of Inertia:Ix: 0.280 in4 [11.655 cm4]Iy: Symmetric
Sectional Moduli:Wx: 0.345 in3 [5.654 cm3]Wy: Symmetric
Weight Per Foot:1.20 lb [0.54 kg]
Maximum Length Available:20.0 ft [6.1 m]
.
0.81” [20.65mm]
0.25” [6.35mm]
Ø0.23” [Ø5.72mm]TYP. 4 PLCS.
1.63”[41.28mm]
1.13”[28.58mm]
TEKNOE0100301
1 x 2 Slot Support Beam1.63 in x 2.50 in
[41.40 mm x 63.50mm]
Typical Uses:• Structural framework.• Cross supports.• Door and safety screen frames.
Features:• T-slots for modular assembly with T-bolts,Joiner Strips, and Square Nuts.• Corner holes run throughout the length of theextrusion for the attachment of End Caps andEnd Plate Brackets.
Material: 6063-T6 Aluminum Alloy
Surface Finish:201 R1 Clear Anodize, 150 RMS with an appli-cation depth of 0.001 in - 0.002 in [0.025 mm -0.051 mm]
Yield Strength:25,000 lbs/in2 [1,758 kg/cm2]
Tensile Strength:30,000 lbs/in2 [2,109 kg/cm2]
Cross Sectional Area (A):1.358 in2 [8.761 cm2]
Moments of Inertia:Ix: 0.919 in4 [38.252 cm4]Iy: 0.377 in4 [15.692 cm4]
Sectional Moduli:Wx: 0.736 in3 [12.060 cm3]Wy: 0.464 in3 [7.604 cm3]
Weight Per Foot:1.60 lb [0.73 kg]
Maximum Length Available:20.0 ft [6.1 m]
.
1-7T-SLOTTED EXTRUSIONS
XX
Y
Y
1.63” [41.28mm]
1.13” [28.65mm]
Ø0.23”[Ø5.72mm]
TYP. 4 PLCS.
0.25” [6.35mm]
2.50”[63.50mm]
2.00”[50.80mm]
0.88”[22.23mm]
0.81”[20.65mm]
TEKNO1-8T-SLOTTED EXTRUSIONS
E01004011 x 3 Slot Support Beam
1.63 in x 3.38 in[41.40 mm x 85.85 mm]
Typical Uses:• Structural framework.• Cross supports.
Features:• T-slots for modular assembly with T-bolts,Joiner Strips, and Square Nuts.• Corner holes run throughout the length of theextrusion for the attachment of End Caps andEnd Plate Brackets.
Material: 6063-T6 Aluminum Alloy
Surface Finish:201 R1 Clear Anodize, 150 RMS with an applica-tion depth of 0.001 in - 0.002 in [0.025 mm -0.051 mm]
Yield Strength:25,000 lbs/in2 [1,758 kg/cm2]
Tensile Strength:30,000 lbs/in2 [2,109 kg/cm2]
Cross Sectional Area (A):1.697 in2 [10.950 cm2]
Moments of Inertia:Ix: 2.079 in4 [86.535 cm4]Iy: 0.474 in4 [19.729 cm4]
Sectional Moduli:Wx: 1.232 in3 [20.190 cm3]Wy: 0.583 in3 [9.554 cm3]
Weight Per Foot:2.00 lb [0.91 kg]
Maximum Length Available:20.0 ft [6.1 m]
.
XX
Y
Y
1.63” [41.28mm]
1.13” [28.58mm]
0.25” [6.35mm]
Ø0.23”[Ø5.72mm]
0.88” [22.23mm]
0.81” [20.65mm]
3.38”[85.73mm]
2.88”[73.03mm]
TEKNO 1-9T-SLOTTED EXTRUSIONS
E01005012 x 2 Slot Support Beam
2.50 in x 2.50 in[63.50 mm x 63.50 mm]
Typical Uses:• Structural framework.• Cross supports.• Support legs.
Features:• T-slots for modular assembly with T-bolts,Joiner Strips, and Square Nuts.• Corner holes run throughout the length of theextrusion for the attachment of End Caps, EndPlate Brackets, Leveling Feet, and Casters.
Material: 6063-T6 Aluminum Alloy
Surface Finish:201 R1 Clear Anodize, 150 RMS with an appli-cation depth of 0.001 in - 0.002 in [0.025 mm -0.051 mm]
Yield Strength:25,000 lbs/in2 [1,758 kg/cm2]
Tensile Strength:30,000 lbs/in2 [2,109 kg/cm2]
Cross Sectional Area (A):1.697 in2 [10.950 cm2]
Moments of Inertia:Ix: 1.232 in4 [51.280 cm4]Iy: Symmetric
Sectional Moduli:Wx: 0.729 in3 [11.950 cm3]Wy: Symmetric
Weight Per Foot:2.00 lb [0.91 kg]
Maximum Length Available:20.0 ft [6.1 m]
.
0.81” [20.65mm]
0.25” [6.35mm]
Ø0.23”[Ø5.72mm]
2.50”[63.50mm]
2.00”[50.80mm]
0.88”[22.23mm]
TEKNO1-10T-SLOTTED EXTRUSIONS
E01006012 x 3 Slot Support Beam
2.50 in x 3.38 in[63.50 mm x 85.85 mm]
Typical Uses:• Structural framework.• Cross supports.
Features:• T-slots for modular assembly with T-bolts,Joiner Strips, and Square Nuts.• Corner holes run throughout the length of theextrusion for the attachment of End Caps andEnd Plate Brackets.
Material: 6063-T6 Aluminum Alloy
Surface Finish:201 R1 Clear Anodize, 150 RMS with an applica-tion depth of 0.001 in - 0.002 in [0.025 mm -0.051 mm]
Yield Strength:25,000 lbs/in2 [1,758 kg/cm2]
Tensile Strength:30,000 lbs/in2 [2,109 kg/cm2]
Cross Sectional Area (A):2.037 in2 [13.140 cm2]
Moments of Inertia:Ix: 2.737 in4 [113.923 cm4]Iy: 1.541 in4 [64.142 cm4]
Sectional Moduli:Wx: 1.623 in3 [26.600 cm3]Wy: 1.236 in3 [20.250 cm3]
Weight Per Foot:2.40 lb [1.09 kg]
Maximum Length Available:20.0 ft [6.1 m]
.
XX
Y
Y2.50” [63.50mm]
2.00” [50.80mm] 0.25”[6.35mm]
0.81”[20.62mm]
0.88”[22.23mm]
Ø0.23”[Ø5.72mm]
3.38”[86.73mm]
2.88”[73.03mm]
TEKNOE0100701
3 x 3 Slot Support Beam3.38 in x 3.38 in
[85.85 mm x 85.85 mm]
Typical Uses:• Structural framework.• Cross supports.• Support legs.
Features:• T-slots for modular assembly with T-bolts,Joiner Strips, and Square Nuts.• Corner holes run throughout the length of theextrusion for the attachment of End Caps, EndPlate Brackets, Leveling Feet, and Casters.
Material: 6063-T6 Aluminum Alloy
Surface Finish:201 R1 Clear Anodize, 150 RMS with an appli-cation depth of 0.001 in - 0.002 in [0.025 mm -0.051 mm]
Yield Strength:25,000 lbs/in2 [1,758 kg/cm2]
Tensile Strength:30,000 lbs/in2 [2,109 kg/cm2]
Cross Sectional Area (A):2.379 in2 [15.350 cm2]
Moments of Inertia:Ix: 3.395 in4 [141.311 cm4]Iy: Symmetric
Sectional Moduli:Wx: 1.975 in3 [32.360 cm3]Wy: Symmetric
Weight Per Foot:2.80 lb [1.27 kg]
Maximum Length Available:20.0 ft [6.1 m]
.
1-11T-SLOTTED EXTRUSIONS
3.38” [85.73mm]
2.88” [73.03mm]
Ø0.23”[Ø5.72mm]
0.25” [6.35mm]
0.88” [22.23mm]
0.81” [20.62mm]
TEKNO1-12T-SLOTTED EXTRUSIONS
E01008011 x 1 Slot Cross Beam
1.75 in x 1.00 in[44.45 mm x 25.40 mm]
Typical Uses:• Structural framework.• Cross supports.• Door and safety screen frames.
Features:• T-slots for modular assembly with T-bolts,Joiner Strips, and Square Nuts.
Material: 6063-T6 Aluminum Alloy
Surface Finish:201 R1 Clear Anodize, 150 RMS with an applica-tion depth of 0.001 in - 0.002 in [0.025 mm -0.051 mm]
Yield Strength:25,000 lbs/in2 [1,758 kg/cm2]
Tensile Strength:30,000 lbs/in2 [2,109 kg/cm2]
Cross Sectional Area (A):0.743 in2 [4.794 cm2]
Moments of Inertia:Ix: 0.193 in4 [8.033 cm4]Iy: 0.074 in4 [3.080 cm4]
Sectional Moduli:Wx: 0.220 in3 [3.605 cm3]Wy: 0.148 in3 [2.425 cm3]
Weight Per Foot:0.87 lb [0.39 kg]
Maximum Length Available:20.0 ft [6.1 m]
.
XX
Y
Y
1.75”[44.45mm]
0.88”[22.23mm]
0.50”[12.70mm]
1.00” [25.40mm]
TEKNO 1-13T-SLOTTED EXTRUSIONS
Typical Use:• Lift mechanisms within structural frameworkapplications.
Features:• T-slots for modular assembly with T-bolts, Joiner Strips, and Square Nuts.* Two embedded larger slots for #60 chain and wearstrip the length of the beam.
Material: 6063-T6 Aluminum Alloy
Surface Finish: 201 R1 Clear Anodize, 150 RMS with an application depth of 0.001in - 0.002 in [0.025 mm - 0.051 mm]
Yield Strength:25,000 lbs/in2 [1,758 kg/cm2]
Tensile Strength:30,000 lbs/in2 [2,109 kg/cm2
Cross Sectional Area (A):8.688 in2
Moments of Inertia:
Sectional Moduli:
Weight Per Foot: 10.17 lb [4.64 kg]
Maximum Length Available:
.
E1200121Lift Extrusion
TEKNO1-14T-SLOTTED EXTRUSIONS
E0800121Snap-On Guide Rail
Typical Use:• Guiding pallets along lenghts of conveyor.
Features:• Mounts easily to allTekno Guide Rail Brackets
Material: 6063-T6 Aluminim Alloy
Surface Finish:201 R1 Clear Anodize, 150 RMS with anapplication depth of 0.001 in - 0.002 in [0.025mm - 0.051 mm]
Yield Strength:
Tensile Strength:
Cross Sectional Area (A):
Moments of Inertia:
Sectional Moduli:
Weight Per Foot:
Maximum Length Available: 20 ft (240in)
.
TEKNO
Notes:
1-15T-SLOTTED EXTRUSIONS
2-1BRACKETS
90° Web Brackets
2 x 2 Slot Full WebBracket
B0100521Page 2-6
45° Web Brackets
1 x 2 Slot Half WebBracket - Right
B0100221Page 2-3
1 x 2 Slot Half WebBracket - Left
B0100321Page 2-4
2 x 1 Slot Full WebBracket
B0100421Page 2-5
3 x 1 Slot Full WebBracket
B0100621Page 2-7
3 x 2 Slot Full WebBracket
B0100721Page 2-8
3 x 3 Slot Full WebBracket
B0100821Page 2-9
1 x 1 Slot 45° WebBracket
B0100921Page 2-10
2 x 2 Slot 45° WebBracket
B0101021Page 2-11
3 x 3 Slot 45° WebBracket
B0101121Page 2-12
Angle Bracket
1 x 1 Slot Angle BracketB0200121Page 2-14
1 x 2 Slot Full Web BracketB0100121Page 2-2
Guide Rail Bracket
Guide Rail BracketB0700721Page 2-13
TEKNOTEKNOTEKNOTEKNOTEKNO
TEKNOB0100121
1 x 2 Slot Full Web Bracket
Typical Use:• To join two coplanar lengths of 1-slotSupport Beam perpendicular (90°) to oneanother.
Features:• Raised bosses and slotted holes for easyalignment during installation.
Material:Pressure Die-cast Aluminum
Weight:0.25 lb [0.11 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 3/4” T-Bolts (H0100121), 4each.• 5/16” Flat Washers (68N34WSDZ/089), 4each.• 5/16” - 18 Nylon Insert Thin Height LockNuts (31CNTEZ), 4 each.
OR
• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 4 each.• 5/16” Flat Washers (68N34WSDZ/089), 4each.• Double Square Nuts (H0100721), 4 each.
Assembly Note:When using Hex Head Cap Screws andDouble Square Nuts with this bracket inapplications where the hardware may vibrate,apply Locktite™ #262 to the outside thread ofthe Cap Screws before insertion to preventloosening.
.
2-2BRACKETS
Ø0.34”[Ø8.64mm]
0.19”[4.78mm]
0.25”[6.35mm]
0.88” [22.23mm]0.38” [9.52mm]
0.43”[10.97mm]SQUARE
0.06”[1.52mm]
2.31”[58.75mm]
1.38” [34.93mm]0.69” [17.48mm]
0.81”[20.65mm]
TEKNOB0100221
1 x 2 Slot HalfWeb Bracket - Right
Typical Use:• To join two lengths of 1-slot Support Beams,not on the same plane, perpendicular (90°) toone another.
Features:• Raised bosses and slotted holes for easyalignment during installation.• The web of the bracket is on its right side asshown in the illustration at right.
Material:Pressure Die-cast Aluminum
Weight:0.14 lb [0.06 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 3/4” T-Bolts (H0100121), 3 each.• 5/16” Flat Washers (68N34WSDZ/089), 3each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 3 each.
OR
• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 3 each.• 5/16” Flat Washers (68N34WSDZ/089), 3each.• Double Square Nuts (H0100721), 3 each.
Assembly Note:When using Hex Head Cap Screws and DoubleSquare Nuts with this bracket in applicationswhere the hardware may vibrate, applyLocktite™ #262 to the outside thread of the CapScrews before insertion to prevent loosening.
.
2-3BRACKETS
0.38”[9.52mm]
0.19”[4.78mm]
0.43”[10.97mm]SQUARE
0.25”[6.35mm]
0.06”[1.60mm]
2.31”[58.75mm]
Ø0.34”[Ø8.64mm]
0.88”[22.23mm]
1.38”[34.98mm]0.69”
[17.48mm]
0.81”[20.62mm]
1.47”[37.39mm]
TEKNOB0100321
1 x 2 Slot HalfWeb Bracket - Left
Typical Use:• To join two lengths of 1-slot SupportBeams, not on the same plane, perpendicular(90°) to one another.
Features:• Raised bosses and slotted holes for easyalignment during installation.• The web of the bracket is on its left side asshown in the illustration at left.
Material:Pressure Die-cast Aluminum
Weight:0.14 lb [0.06 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 3/4” T-Bolts (H0100121), 3each.• 5/16” Flat Washers (68N34WSDZ/089), 3each.• 5/16” - 18 Nylon Insert Thin Height LockNuts (31CNTEZ), 3 each.
OR
• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 3 each.• 5/16” Flat Washers (68N34WSDZ/089), 3each.• Double Square Nuts (H0100721), 3 each.
Assembly Note:When using Hex Head Cap Screws andDouble Square Nuts with this bracket inapplications where the hardware may vibrate,apply Locktite™ #262 to the outside thread ofthe Cap Screws before insertion to preventloosening.
.
2-4BRACKETS
Ø0.34”[Ø8.64mm]
0.19”[4.78mm]
0.25”[6.35mm]
0.88”[22.23mm]
0.43”[10.97mm]SQUARE
0.06”[1.60mm]
1.47”[37.34mm]
0.81”[20.62mm]
0.69”[17.48mm]
1.38”[34.93mm]
0.38”[9.52mm]
2.31”[58.67mm]
TEKNO2-5BRACKETS
B01004212 x 1 Slot Full Web Bracket
Typical Use:• To join two lengths of 2-slot Support Beam,not on the same plane, perpendicular (90°) toone another.
Features:• Raised bosses and slotted holes for easyalignment during installation.
Material:Pressure Die-cast Aluminum
Weight:0.24 lb [0.11 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 3/4” T-Bolts (H0100121), 6each.• 5/16” Flat Washers (68N34WSDZ/089), 6each.• 5/16” - 18 Nylon Insert Thin Height LockNuts (31CNTEZ), 6 each.
OR
• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 6 each.• 5/16” Flat Washers (68N34WSDZ/089), 6each.• Double Square Nuts (H0100721), 6 each.
Assembly Note:When using Hex Head Cap Screws andDouble Square Nuts with this bracket inapplications where the hardware may vibrate,apply Locktite™ #262 to the outside threadof the Cap Screws before insertion to preventloosening.
.
0.43”[10.97mm]SQUARE
0.19”[4.78mm]
0.25”[6.35mm]
2.31”[58.75mm]
0.06”[1.60mm]
0.81”[20.62mm]
0.69”[17.48mm]
2.25” [57.15mm]
0.38”[9.52mm]
Ø0.34”[Ø8.64mm]1.47”
[37.39mm]
TEKNO 2-6BRACKETS
B01005212 x 2 Slot Full Web Bracket
Typical Use:• To join two coplanar lengths of 2-slotSupport Beam perpendicular (90°) to oneanother.
Features:• Raised bosses and slotted holes for easyalignment during installation.
Material:Pressure Die-cast Aluminum
Weight:0.44 lb [0.20 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 3/4” T-Bolts (H0100121), 8each.• 5/16” Flat Washers (68N34WSDZ/089), 8each.• 5/16” - 18 Nylon Insert Thin Height LockNuts (31CNTEZ), 8 each.
OR
• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 8 each.• 5/16” Flat Washers (68N34WSDZ/089), 8each.• Double Square Nuts (H0100721), 8 each.
Assembly Note:When using Hex Head Cap Screws andDouble Square Nuts with this bracket inapplications where the hardware may vibrate,apply Locktite™ #262 to the outside thread ofthe Cap Screws before insertion to preventloosening.
.
0.88” [22.35mm]
0.43”[10.97mm]SQUARE
Ø0.34”[Ø8.64mm]
0.19”[4.78mm]
0.25”[6.35mm]
0.06”[1.60mm]
2.31”[58.72mm]
0.81”[20.62mm]
0.69”[17.48mm]
2.25” [57.15mm]
0.38”[9.52mm]
TEKNO2-7BRACKETS
B01006213 x 1 Slot Full Web Bracket
Typical Use:• To join a length of 1-slot Support Beamperpendicular (90°), but not coplanar, to alength of 3-slot Support Beam.
Features:• Raised bosses and slotted holes for easyalignment during installation.
Material:Pressure Die-cast Aluminum
Weight:0.42 lb [0.19 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 3/4” T-Bolts (H0100121), 6each.• 5/16” Flat Washers (68N34WSDZ/089), 6each.• 5/16” - 18 Nylon Insert Thin Height LockNuts (31CNTEZ), 6 each.
OR
• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 6 each.• 5/16” Flat Washers (68N34WSDZ/089), 6each.• Double Square Nuts (H0100721), 6 each.
Assembly Note:When using Hex Head Cap Screws andDouble Square Nuts with this bracket inapplications where the hardware may vibrate,apply Locktite™ #262 to the outside threadof the Cap Screws before insertion to preventloosening.
.
0.43”[10.97mm]
0.19”[4.78mm]
0.25”[6.35mm]
3.19”[80.98mm]
0.06”[1.60mm]
Ø0.34” [Ø8.64mm]
0.69”[17.48mm]
0.81”[20.62mm]
2.44” [61.93mm]
3.13” [79.38mm]
0.38”[9.52mm]
1.47”[37.39mm]
TEKNO 2-8BRACKETS
B01007213 x 2 Slot Full Web Bracket
Typical Use:• To join a length of 2-slot Support Beamperpendicular (90°), but not coplanar, to a lengthof 3-slot Support Beam.
Features:• Raised bosses and slotted holes for easyalignment during installation.
Material:Pressure Die-cast Aluminum
Weight:0.53 lb [0.24 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 3/4” T-Bolts (H0100121), 8 each.• 5/16” Flat Washers (68N34WSDZ/089), 8each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 8 each.
OR
• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 8 each.• 5/16” Flat Washers (68N34WSDZ/089), 8each.• Double Square Nuts (H0100721), 8 each.
Assembly Note:When using Hex Head Cap Screws and DoubleSquare Nuts with this bracket in applicationswhere the hardware may vibrate, applyLocktite™ #262 to the outside thread of the CapScrews before insertion to prevent loosening.
.
Ø0.34”[Ø8.64mm] 0.88” [22.23mm]
0.19”[4.78mm]
0.34”[8.64mm]SQUARE
0.25”[6.35mm]
0.06”[1.60mm]
3.19”[80.98mm]
0.69”[17.48mm]
1.19”[30.18mm]
3.13” [79.38mm]
0.38”[9.52mm]
2.35”[59.59mm]
TEKNO2-9BRACKETS
B01008213 x 3 Slot Full Web Bracket
Typical Use:• To join two coplanar lengths of 3-slot SupportBeam perpendicular (90°) to one another.
Features:• Raised bosses and slotted holes for easyalignment during installation.
Material:Pressure Die-cast Aluminum
Weight:0.69 lb [0.31 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 3/4” T-Bolts (H0100121), 8 each.• 5/16” Flat Washers (68N34WSDZ/089), 8each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 8 each.
OR
• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 8 each.• 5/16” Flat Washers (68N34WSDZ/089), 8each.• Double Square Nuts (H0100721), 8 each.
Assembly Note:When using Hex Head Cap Screws and DoubleSquare Nuts with this bracket in applicationswhere the hardware may vibrate, applyLocktite™ #262 to the outside thread of the CapScrews before insertion to prevent loosening.
.
0.38” [9.52mm]0.06” [1.60mm]
0.43”[10.97mm]SQUARE
1.75”[44.45mm]
1.75”[44.45mm]
Ø0.34”[Ø8.64mm]
0.25”[6.35mm] 0.19”
[4.78mm]
3.19”[80.98mm]
3.13” [79.38mm]0.69”
[17.48mm]
0.81”[20.62mm]
TEKNO 2-10BRACKETS
B01009211 x 1 Slot 45° Web Bracket
Typical Uses:• To join the end of a 1-slot Support Beam to theside of another 1-slot Support Beam at a 45° angle.• Provides support structure sway bracing.
Features:• Provides easy alignment for 45° angle gussets.• Surface “A” depicted in the 2-D illustrationattaches firmly to the end of a 1 x 1 Slot SupportBeam with 1/4 - 20 Socket Head Cap Screws.• Surface “B” attaches firmly to the side of the other1 x 1 Slot Support Beam with fasteners listed below.
Material:Pressure Die-cast Aluminum
Weight:0.38 lb [0.17 kg]
Hardware Recommended for Assembly:For attachment to the end of the one support beam:• 1/4” - 20 x 1” Socket Head Cap Screws(25C100KCSS), 4 each.
For attachment to the side of the other supportbeam:• 5/16” - 18 x 7/8” T-bolts (H0100221), 2 each.• 5/16” Flat Washers (68N34WSDZ/089), 2 each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 2 each.
OR
• 5/16” - 18 x 3/4” Hex Head Cap Screws(31C75HCS5Z), 2 each.• 5/16” Flat Washers (68N34WSDZ/089), 2 each.• Double Square Nuts (H0100721), 2 each.
Assembly Note:When using Hex Head Cap Screws and DoubleSquare Nuts with this bracket in applications wherethe hardware may vibrate, apply Locktite™ #262 tothe outside thread of the Cap Screws beforeinsertion to prevent loosening.
.
0.25” [6.35mm]
0.25”[6.35mm]
1.95”[49.48mm]0.31”
[7.92mm]
1.13”[28.58mm]
SURFACE A
SURFACE B
4.50” [114.30mm]
3.50” [88.90mm] 0.50” [12.70mm]
0.63”[15.88mm]
Ø0.34” [Ø8.64mm]Ø0.22” [Ø5.56mm]
0.75”[19.05mm]
1.63”[41.28mm]
TEKNO2-11BRACKETS
B01010212 x 2 Slot 45° Web Bracket
Typical Uses:• To join the end of a 2-slot Support Beam to theside of another 2-slot Support Beam at a 45° angle.• Provides support structure sway bracing.
Features:• Provides easy alignment for 45° angle gussets.• Surface “A” depicted in the 2-D illustrationattaches firmly to the end of a 2 x 2 Slot SupportBeam with 1/4 - 20 Socket Head Cap Screws.• Surface “B” attaches firmly to the side of the other2 x 2 Slot Support Beam with fasteners listedbelow.
Material:Pressure Die-cast Aluminum
Weight:0.50 lb [0.23 kg]
Hardware Recommended for Assembly:For attachment to the end of the 2 x 2 Slot SupportBeam:• 1/4” - 20 x 1” Socket Head Cap Screws(25C100KCSS), 4 each.
For attachment to the side of the other supportbeam:• 5/16” - 18 x 7/8” T-bolts (H0100221), 4 each.• 5/16” Flat Washers (68N34WSDZ/089), 4 each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 4 each.
OR
• 5/16” - 18 x 3/4” Hex Head Cap Screws(31C75HCS5Z), 4 each.• 5/16” Flat Washers (68N34WSDZ/089), 4 each.• Double Square Nuts (H0100721), 4 each.
Assembly Note:When using Hex Head Cap Screws and DoubleSquare Nuts with this bracket in applications wherethe hardware may vibrate, apply Locktite™ #262 tothe outside thread of the Cap Screws beforeinsertion to prevent loosening.
.
0.25” [6.35mm]
0.25”[6.35mm]
2.00”[50.80mm]
SURFACE A
SURFACE B
5.38” [136.53mm]
2.57”[65.18mm]
0.31”[7.95mm]
0.50” [12.70mm]4.38” [111.13mm]
2.13”[53.98mm]
2.50”[63.50mm]
0.62”[15.72mm]
0.88”[22.23mm]
Ø0.34”[Ø8.64mm]
Ø0.27” [Ø5.58mm]
TEKNO 2-12BRACKETS
B01011213 x 3 Slot 45° Web Bracket
Typical Uses:• To join the end of a 3-slot Support Beam to theside of another 3-slot Support Beam at a 45° angle.• Provides support structure sway bracing.
Features:• Provides easy alignment for 45° angle gussets.• Surface “A” depicted in the 2-D illustrationattaches firmly to the end of a 3 x 3 Slot SupportBeam with 1/4 - 20 Socket Head Cap Screws.• Surface “B” attaches firmly to the side of the other3 x 3 Slot Support Beam with fasteners listed below.
Material:Pressure Die-cast Aluminum
Weight:0.63 lb [0.28 kg]
Hardware Recommended for Assembly:For attachment to the end of the 3 x 3 Slot SupportBeam:• 1/4” - 20 x 1” Socket Head Cap Screws(25C100KCSS), 4 each.
For attachment to the side of the other supportbeam:• 5/16” - 18 x 7/8” T-bolts (H0100221), 6 each.• 5/16” Flat Washers (68N34WSDZ/089), 6 each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 6 each.
OR
• 5/16” - 18 x 3/4” Hex Head Cap Screws(31C75HCS5Z), 6 each.• 5/16” Flat Washers (68N34WSDZ/089), 6 each.• Double Square Nuts (H0100721), 6 each.
Assembly Note:When using Hex Head Cap Screws and DoubleSquare Nuts with this bracket in applications wherethe hardware may vibrate, apply Locktite™ #262 tothe outside thread of the Cap Screws beforeinsertion to prevent loosening.
.
0.25” [6.35mm]
0.25”[6.35mm]
3.19”[80.90mm]
0.31”[7.92mm]
2.88”[73.03mm]
SURFACE A
SURFACE B6.00” [152.40mm]
5.00” [127.00mm] 0.50” [12.70mm]
3.00”[76.20mm]
3.38”[85.73mm]
Ø0.27” [Ø5.58mm]Ø0.34” [Ø8.64mm]
0.88”[22.23mm]
0.63”[15.88mm]
TEKNO2-13BRACKETS
B0700721Guide Rail Bracket
Typical Uses:• Mounting bracket for Tekno style guide rail
Material:6061-T6 Aluminum
Surface Finish:Polished
Weight:0.08 lb [0.03 kg]
Hardware Recommended for Assembly:For a Support Beam Joint:• 3/4’ T-Bolt (H0100121), (1ea.)• 5/16”-18 NY-LOC Flange nut (31CNNEFW)• Guide Rail Wedge ( H0900121), (1ea)
.
TEKNO 2-14BRACKETS
0.25”[6.35mm]
Ø0.34”[Ø8.74mm]
0.25”[6.35mm]
1.50”[38.10mm]
1.50”[38.10mm]
1.50”[38.10mm] 0.75”
[19.05mm]
0.81”[20.62mm]0.81”
[20.62mm]
B02001211 x 1 Slot Angle Bracket
Typical Uses:• To attach a 1-slot support beam to amachine base.
Material:6061-T6 Aluminum Alloy Angle
Surface Finish:Clear Anodize
Weight:0.10 lb [0.05 kg]
Hardware Recommended for Assembly:For a Support Beam Joint:• 5/16” - 18 x 5/8” Button Head Cap Screws(31C62KBCS), 2 each.• 5/16” Double Square Nuts (H0100721), 2each.
OR
For Attachment to a Machine Base:• 5/16” - 18 x 5/8” Button Head Cap Screws(31C62KBCS), 2 each.• 5/16” Double Square Nut (H0100721), 1each.
Assembly Note:When using Cap Screws and Double SquareNuts with this bracket in applications wherethe hardware may vibrate; apply Locktite™#262 to the outside thread of the Cap Screwsbefore insertion to prevent loosening.
.
TEKNO
Stair Tread and WalkoversTekno’s Modu-Tek line also allows you to design and buildcompletely modular stair treads and walkovers for yourapplication. Built of the highest quality extruded anodizedaluminum, these structures provide lightweight, yet ultrasturdy platforms and staircases. Our tread plate materialis designed with a premium on safety; all of our treadplates feature raised rows of “teeth” for extra traction. Wealso offer vented tread plate that allows dirt and otheraccumulates to fall freely through the plate, virtuallyeliminating the risk of slippage. As is the case with anyModu-Tek product, these structures posess incredibleversatility and are easily configured/reconfigured for anyapplication; no drilling or tapping required! Call us today forfurther information on our Modu-Tek Walkovers and StairTreads!This Page
Intentionally LeftBlank
TEKNO
Notes:
TEKNOAdapter Plates
1 x 1 Slot End AdapterPlate
B0300121Page 3-3
1 x 3 Slot End AdapterPlate
B0300321Page 3-5
2 x 3 Slot Ended AdapterPlate
B0300621Page 3-8
3 x 1 Slot End AdapterPlate
B0300721Page 3-9
3 x 2 Slot End AdapterPlate
B0300821Page 3-10
3 x 3 Slot End AdapterPlate
B0300921Page 3-11
90° Corner Joining Plates
1-Slot 90° CornerJoining Plate
B0500121Page 3-12
Heavy DutyJoining Plates
1 x 2 Slot End AdapterPlate
B0300221Page 3-4
2 x 1 Slot End AdapterPlate
B0300421Page 3-6
2 x 2 Slot End AdapterPlate
B0300521Page 3-7
2-Slot 90° CornerJoining Plate
B0500221Page 3-13
3-Slot 90° CornerJoining Plate
B0500321Page 3-14
1-Slot Heavy Duty CornerJoining Plate
B0500421Page 3-15
3-1ADAPTER/JOINING PLATES
TEKNO 3-2ADAPTER/JOINING PLATES
45° Corner Joining Plates
1 x 1 Joining PlateB0501121Page 3-21
1-Slot 45° Right HandCorner Joining Plate
B0500521Page 3-16
1-Slot Left HandCorner Joining Plate
B0500621Page 3-17
2-Slot 45° Right HandCorner Joining Plate
B0500721Page 3-18
2-Slot 45° Left HandCorner Joining Plate
B0500821Page 3-18
3-Slot 45° RightCorner Joining Plate
B0500921Page 3-19
3-Slot 45° LeftCorner Joining Plate
B0501021Page 3-20
1 x 1 (4-Hole Tee) JoiningPlate
B0501221Page 3-22
1 x 1 (6-Hole Tee) JoiningPlate
B0501321Page 3-23
TEKNO3-3ADAPTER/JOINING PLATES
B03001211 x 1 Slot End Adapter Plate
Typical Use:• To mount 1 x 1, 1 x 2, or 1 x 3 Slot Support Beamsperpendicularly to 1 x 1 Slot Support Beams incross beam applications.
Features:• Provides alignment for two perpendicular supportbeams.• 1/4” - 20 x 1 1/4” Flat Head Cap Screws securethe end of a 1 x 1 Slot Support Beam to the bracketon surface “A”.• T-bolts or Hex Head Cap Screws secure surface“B” of the bracket to the side of the mating 1 x 1, 1 x2, or 1 x 3 Slot Support Beam.
Material:Clear Anodized Aluminum
Weight:0.19 lb [0.09 kg]
Hardware Recommended for Assembly:For attachment to the end of the 1 x 1 Slot SupportBeam:• 1/4” - 20 x 1 1/4” Flat Head Thread Cutting CapScrews (25C125TTF), 4 each.
For attachment to the side of the other matingsupport beam:• 5/16” - 18 x 7/8” T-bolts (H0100221), 2 each.• 5/16” Flat Washers (68N34WSDZ/089), 2 each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 2 each.
OR
• 5/16” - 18 x 3/4” Hex Head Cap Screws(31C75HCS5Z), 2 each.• 5/16” Flat Washers (68N34WSDZ/089), 2 each.• Double Square Nuts (H0100721), 2 each.
Assembly Note:When using Hex Head Cap Screws and DoubleSquare Nuts with this bracket in applications wherethe hardware may vibrate, apply Locktite™ #262 tothe outside thread of the Cap Screws beforeinsertion to prevent loosening.
.
4.25” [107.95mm]3.25” [82.55mm]
1.13”[28.58mm]
0.25”[6.35mm]
1.13”[28.58mm]
0.50”[12.70mm]
Ø0.34” [Ø8.64mm]
DRILLED & COUNTERSUNKFOR 1/4 -20 FHCS
1.56”[39.67mm]
0.81”[20.65mm]
1.63”[41.28mm]
SURFACEA
SURFACEB
0.31”[7.95mm]
TEKNO 3-4ADAPTER/JOINING PLATES
B03002211 x 2 Slot End Adapter Plate
Typical Use:• To mount 1 x 1, 1 x 2, or 1 x 3 Slot Support Beamsperpendicularly to 1 x 2 Slot Support Beams incross beam applications.
Features:• Provides alignment for two perpendicularsupportbeams.• 1/4” - 20 x 1 1/4” Flat Head Cap Screws securethe end of a 1 x 2 Slot Support Beam to the bracketon surface “A”.• T-bolts or Hex Head Cap Screws secure surface“B” of the bracket to the side of the mating 1 x 1, 1 x2, or 1 x 3 Slot Support Beam.
Material:Clear Anodized Aluminum
Weight:0.24 lb [0.11 kg]
Hardware Recommended for Assembly:For attachment to the end of the 1 x 2 Slot SupportBeam:• 1/4” - 20 x 1 1/4” Flat Head Thread Cutting CapScrews (25C125TTF), 4 each.
For attachment to the side of the other matingsupport beam:• 5/16” - 18 x 7/8” T-bolts (H0100221), 2 each.• 5/16” Flat Washers (68N34WSDZ/089), 2 each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 2 each.
OR
• 5/16” - 18 x 3/4” Hex Head Cap Screws(31C75HCS5Z), 2 each.• 5/16” Flat Washers (68N34WSDZ/089), 2 each.• Double Square Nuts (H0100721), 2 each.
Assembly Note:When using Hex Head Cap Screws and DoubleSquare Nuts with this bracket in applicationswherethe hardware may vibrate, apply Locktite™ #262 tothe outside thread of the Cap Screws beforeinsertion to prevent loosening.
.
TEKNO3-5ADAPTER/JOINING PLATES
B03003211 x 3 Slot End Adapter Plate
Typical Use:• To mount 1 x 1, 1 x 2, or 1 x 3 Slot Support Beamsperpendicularly to 1 x 3 Slot Support Beams incross beam applications.
Features:• Provides alignment for two perpendicular supportbeams.• 1/4” - 20 x 1 1/4” Flat Head Cap Screws securethe end of a 1 x 3 Slot Support Beam to the bracketon surface “A”.• T-bolts or Hex Head Cap Screws secure surface“B” of the bracket to the side of the mating 1 x 1, 1 x2, or 1 x 3 Slot Support Beam.
Material:Clear Anodized Aluminum
Weight:0.29 lb [0.13 kg]
Hardware Recommended for Assembly:For attachment to the end of the 1 x 3 Slot SupportBeam:• 1/4” - 20 x 1 1/4” Flat Head Thread Cutting CapScrews (25C125TTF), 4 each.
For attachment to the side of the other matingsupport beam:• 5/16” - 18 x 7/8” T-bolts (H0100221), 2 each.• 5/16” Flat Washers (68N34WSDZ/089), 2 each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 2 each.
OR
• 5/16” - 18 x 3/4” Hex Head Cap Screws(31C75HCS5Z), 2 each.• 5/16” Flat Washers (68N34WSDZ/089), 2 each.• Double Square Nuts (H0100721), 2 each.
Assembly Note:When using Hex Head Cap Screws and DoubleSquare Nuts with this bracket in applications wherethe hardware may vibrate, apply Locktite™ #262 tothe outside thread of the Cap Screws beforeinsertion to prevent loosening.
.
SURFACEA
SURFACEB
0.31”[7.95mm]
0.25” [6.35mm] 1.13” [28.58mm]
0.50” [12.70mm]
Ø0.34”[Ø8.64mm]
DRILLED &COUNTERSUNK
FOR1/4-20 FHCS
1.56”[39.67mm]
0.81”[20.65mm]
1.63”[41.28mm]
2.88”[73.03mm]
5.00”[127.00mm]
6.00”[152.40mm]
TEKNO 3-6ADAPTER/JOINING PLATES
B03004212 x 1 Slot End Adapter Plate
Typical Use:• To mount 1 x 2, 2 x 2, or 2 x 3 Slot Support Beamsperpendicularly to 1 x 2 Slot Support Beams incross beam applications.
Features:• Provides alignment for two perpendicular supportbeams.• 1/4” - 20 x 1 1/4” Flat Head Cap Screws securethe end of a 1 x 2 Slot Support Beam to the bracketon surface “A”.• T-bolts or Hex Head Cap Screws secure surface“B” of the bracket to the side of the mating 1 x 2, 2 x2, or 2 x 3 Slot Support Beam.
Material:Clear Anodized Aluminum
Weight:0.30 lb [0.14 kg]
Hardware Recommended for Assembly:For attachment to the end of the 1 x 2 Slot SupportBeam:• 1/4” - 20 x 1 1/4” Flat Head Thread Cutting CapScrews (25C125TTF), 4 each.
For attachment to the side of the other matingsupport beam:• 5/16” - 18 x 7/8” T-bolts (H0100221), 4 each.• 5/16” Flat Washers (68N34WSDZ/089), 4 each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 4 each.
OR
• 5/16” - 18 x 3/4” Hex Head Cap Screws(31C75HCS5Z), 4 each.• 5/16” Flat Washers (68N34WSDZ/089), 4 each.• Double Square Nuts (H0100721), 4 each.
Assembly Note:When using Hex Head Cap Screws and DoubleSquare Nuts with this bracket in applicationswherethe hardware may vibrate, apply Locktite™ #262 tothe outside thread of the Cap Screws beforeinsertion to prevent loosening.
.
TEKNO3-7ADAPTER/JOINING PLATES
B03005212 x 2 Slot End Adapter Plate
Typical Use:• To mount 1 x 2, 2 x 2, or 2 x 3 Slot Support Beamsperpendicularly to 2 x 2 Slot Support Beams incross beam applications.
Features:• Provides alignment for two perpendicular supportbeams.• 1/4” - 20 x 1 1/4” Flat Head Cap Screws securethe end of a 2 x 2 Slot Support Beam to the bracketon surface “A”.• T-bolts or Hex Head Cap Screws secure surface“B” of the bracket to the side of the mating 1 x 2, 2 x2, or 2 x 3 Slot Support Beam.
Material:Clear Anodized Aluminum
Weight:0.38 lb [0.17 kg]
Hardware Recommended for Assembly:For attachment to the end of the 2 x 2 Slot SupportBeam:• 1/4” - 20 x 1 1/4” Flat Head Thread Cutting CapScrews (25C125TTF), 4 each.
For attachment to the side of the other matingsupport beam:• 5/16” - 18 x 7/8” T-bolts (H0100221), 4 each.• 5/16” Flat Washers (68N34WSDZ/089), 4 each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 4 each.
OR
• 5/16” - 18 x 3/4” Hex Head Cap Screws(31C75HCS5Z), 4 each.• 5/16” Flat Washers (68N34WSDZ/089), 4 each.• Double Square Nuts (H0100721), 4 each.
Assembly Note:When using Hex Head Cap Screws and DoubleSquare Nuts with this bracket in applicationswherethe hardware may vibrate, apply Locktite™ #262 tothe outside thread of the Cap Screws beforeinsertion to prevent loosening.
.
TEKNO
B03006212 x 3 Slot End Adapter Plate
Typical Use:• To mount 1 x 2, 2 x 2, or 2 x 3 Slot SupportBeams perpendicularly to 2 x 3 Slot SupportBeams in cross beam applications.
Features:• Provides alignment for two perpendicularsupport beams.• 1/4” - 20 x 1 1/4” Flat Head Cap Screws securethe end of a 2 x 3 Slot Support Beam to thebracket on surface “A”.• T-bolts or Hex Head Cap Screws securesurface “B” of the bracket to the side of themating 1 x 2, 2 x 2, or 2 x 3 Slot Support Beam.
Material:Clear Anodized Aluminum
Weight:0.45 lb [0.20 kg]
Hardware Recommended for Assembly:For attachment to the end of the 2 x 3 SlotSupport Beam:• 1/4” - 20 x 1 1/4” Flat Head Thread Cutting CapScrews (25C125TTF), 4 each.
For attachment to the side of the other matingsupport beam:• 5/16” - 18 x 7/8” T-bolts (H0100221), 4 each.• 5/16” Flat Washers (68N34WSDZ/089), 4each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 4 each.
OR
• 5/16” - 18 x 3/4” Hex Head Cap Screws(31C75HCS5Z), 4 each.• 5/16” Flat Washers (68N34WSDZ/089), 4each.• Double Square Nuts (H0100721), 4 each.
Assembly Note:When using Hex Head Cap Screws and DoubleSquare Nuts with this bracket in applicationswhere the hardware may vibrate, applyLocktite™ #262 to the outside thread of the CapScrews before insertion to prevent loosening.
.
2.50” [63.50mm]SURFACE A
SURFACE B
0.31” [7.95mm]
0.81”[20.65mm]
0.88”[22.23mm]
Ø0.34”[Ø8.64mm] 0.50” [12.70mm]
DRILLED &COUNTERSUNK
FOR1/4-20 FHCS
1.56”[39.67mm]
2.00” [50.80mm]
2.88”[73.03mm]
5.00”[127.00mm]
6.00”[152.40mm]
3-8ADAPTER/JOINING PLATES
TEKNO3-9ADAPTER/JOINING PLATES
B03007213 x 1 Slot End Adapter Plate
Typical Use:• To mount 1 x 3, 2 x 3, or 3 x 3 Slot SupportBeams perpendicularly to 1 x 3 Slot SupportBeams in cross beam applications.
Features:• Provides alignment for two perpendicularsupport beams.• 1/4” - 20 x 1 1/4” Flat Head Cap Screwssecure the end of a 1 x 3 Slot Support Beam tothe bracket on surface “A”.• T-bolts or Hex Head Cap Screws securesurface “B” of the bracket to the side of themating 1 x 3, 2 x 3, or 3 x 3 Slot Support Beam.
Material:Clear Anodized Aluminum
Weight:0.41 lb [0.18 kg]
Hardware Recommended for Assembly:For attachment to the end of the 2 x 3 SlotSupport Beam:• 1/4” - 20 x 1 1/4” Flat Head Thread CuttingCap Screws (25C125TTF), 4 each.
For attachment to the side of the other matingsupport beam:• 5/16” - 18 x 7/8” T-bolts (H0100221), 6 each.• 5/16” Flat Washers (68N34WSDZ/089), 6each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 6 each.
OR
• 5/16” - 18 x 3/4” Hex Head Cap Screws(31C75HCS5Z), 6 each.• 5/16” Flat Washers (68N34WSDZ/089), 6each.• Double Square Nuts (H0100721), 6 each.
Assembly Note:When using Hex Head Cap Screws and DoubleSquare Nuts with this bracket in applicationswhere the hardware may vibrate, applyLocktite™ #262 to the outside thread of the CapScrews before insertion to prevent loosening.
.
SURFACE A
SURFACE B
0.31”[7.95mm]
3.38” [85.73mm]
0.25”[6.35mm]
Ø0.34”[Ø8.64mm]
0.88”[22.23mm]
DRILLED &COUNTERSUNK
FOR1/4-20 FHCS
0.50” [12.70mm]
1.56”[39.67mm]
1.75”[44.45mm]
2.88” [73.03mm]
1.13”[28.58mm]
3.25”[82.55mm]
4.25”[107.95mm]
TEKNOB0300821
3 x 2 Slot End Adapter Plate
Typical Use:• To mount 1 x 3, 2 x 3, or 3 x 3 Slot SupportBeams perpendicularly to 2 x 3 Slot SupportBeams in cross beam applications.
Features:• Provides alignment for two perpendicularsupport beams.• 1/4” - 20 x 1 1/4” Flat Head Cap Screws securethe end of a 2 x 3 Slot Support Beam to thebracket on surface “A”.• T-bolts or Hex Head Cap Screws securesurface “B” of the bracket to the side of themating 1 x 3, 2 x 3, or 3 x 3 Slot Support Beam.
Material:Clear Anodized Aluminum
Weight:0.50 lb [0.23 kg]
Hardware Recommended for Assembly:For attachment to the end of the 2 x 3 SlotSupport Beam:• 1/4” - 20 x 1 1/4” Flat Head Thread Cutting CapScrews (25C125TTF), 4 each.
For attachment to the side of the other matingsupport beam:• 5/16” - 18 x 7/8” T-bolts (H0100221), 6 each.• 5/16” Flat Washers (68N34WSDZ/089), 6each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 6 each.
OR
• 5/16” - 18 x 3/4” Hex Head Cap Screws(31C75HCS5Z), 6 each.• 5/16” Flat Washers (68N34WSDZ/089), 6each.• Double Square Nuts (H0100721), 6 each.
Assembly Note:When using Hex Head Cap Screws and DoubleSquare Nuts with this bracket in applicationswhere the hardware may vibrate, applyLocktite™ #262 to the outside thread of the CapScrews before insertion to prevent loosening.
.
3.38” [85.73mm]
SURFACE A
0.31” [7.95mm]
SURFACE B
0.88”[22.23mm]
0.81”[20.62mm]
0.50” [12.70mm]
Ø0.34”[Ø8.64mm]
DRILLED &COUNTERSUNKFOR 1/4-20 FHCS
1.56” [39.67mm]
0.25” [6.35mm] 2.88” [73.03mm]
2.00”[50.80mm]
4.13”[104.78mm]
5.13”[130.18mm]
3-10ADAPTER/JOINING PLATES
TEKNO3-11ADAPTER/JOINING PLATES
B03009213 x 3 Slot End Adapter Plate
Typical Use:• To mount 1 x 3, 2 x 3, or 3 x 3 Slot SupportBeams perpendicularly to 3 x 3 Slot SupportBeams in cross beam applications.
Features:• Provides alignment for two perpendicularsupport beams.• 1/4” - 20 x 1 1/4” Flat Head Cap Screwssecure the end of a 3 x 3 Slot Support Beam tothe bracket on surface “A”.• T-bolts or Hex Head Cap Screws securesurface “B” of the bracket to the side of themating 1 x 3, 2 x 3, or 3 x 3 Slot Support Beam.
Material:Clear Anodized Aluminum
Weight:0.60 lb [0.27 kg]
Hardware Recommended for Assembly:For attachment to the end of the 3 x 3 SlotSupport Beam:• 1/4” - 20 x 1 1/4” Flat Head Thread CuttingCap Screws (25C125TTF), 4 each.
For attachment to the side of the other matingsupport beam:• 5/16” - 18 x 7/8” T-bolts (H0100221), 6 each.• 5/16” Flat Washers (68N34WSDZ/089), 6each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 6 each.
OR
• 5/16” - 18 x 3/4” Hex Head Cap Screws(31C75HCS5Z), 6 each.• 5/16” Flat Washers (68N34WSDZ/089), 6each.• Double Square Nuts (H0100721), 6 each.
Assembly Note:When using Hex Head Cap Screws and DoubleSquare Nuts with this bracket in applicationswhere the hardware may vibrate, applyLocktite™ #262 to the outside thread of the CapScrews before insertion to prevent loosening.
.
3.38” [85.73mm]
SURFACE A0.31” [7.95mm]
SURFACE B
0.81”[20.65mm]
0.25”[6.35mm]
Ø0.34”[Ø8.64mm]
DRILLED &COUNTERSUNKFOR 1/4-20 FHCS
1.56”[39.67mm]
2.88” [73.03mm]
0.88”[22.23mm]
0.50” [12.70mm]
2.88”[73.03mm]
5.00”[127.00mm]
6.00”[152.40mm]
TEKNOB0500121
1-Slot 90° Corner Joining Plate
Typical Use:• To connect 1 x 1, 1 x 2, and 1 x 3 SlotSupport Beams to one another at a perpen-dicular (90°) angle.
Features:• Recessed tabs allow for the accuratepositioning into beam T-slots to ensuresquareness of the joint.
Material:Mild Steel, Zinc Plated
Weight:0.32 lb [0.14 kg]
Hardware Recommended for Assembly:Standard Configuration:• 5/16” - 18 x 3/4” T-bolts (H0100121), 5each.• 5/16” Flat Washers (68N34WSDZ/089), 5each.• 5/16” - 18 Nylon Insert Thin Height LockNuts (31CNTEZ), 5 each.
Alternate configuration (used as a highloading capacity fastening method whichallows for easy lateral movement of thebracket and fasteners along the length of onebeam’s T-slot):• 5/16” - 18 x 1/2” Hex Head Cap Screws(31C50HCS5Z), 5 each.• 5/16” Lock Washers (31NLOCZ), 5 each.• Double Square Nuts (H0100721), 5 each.
.
0.63”[15.88mm]
1.75”[44.45mm]
0.88”[22.23mm]
4.56”[115.90mm]
1.25”[31.75mm]
Ø0.34” [Ø8.64mm]
0.13”[3.18mm]
0.06”[1.60mm] 0.43”
[10.97mm]
SECTION A-A
High Load Capacity Fastening Method
3-12ADAPTER/JOINING PLATES
TEKNO3-13ADAPTER/JOINING PLATES
B05002212-Slot 90° Corner Joining
PlateB05002212-Slot 90° Corner Joining Plate
Typical Use:• To connect 1 x 2, 2 x 2, and 2 x 3 SlotSupport Beams to one another at aperpendicular(90°) angle.
Features:• Recessed tabs allow for the accuratepositioning into beam T-slots to ensuresquareness of the joint.
Material:Mild Steel, Zinc Plated
Weight:0.60 lb [0.27 kg]
Hardware Recommended for Assembly:Standard Configuration:• 5/16” - 18 x 3/4” T-bolts (H0100121), 10each.• 5/16” Flat Washers (68N34WSDZ/089), 10each.• 5/16” - 18 Nylon Insert Thin Height LockNuts (31CNTEZ), 10 each.
Alternate configuration (used as a highloading capacity fastening method whichallows for easy lateral movement of thebracket and fasteners along the length of onebeam’s T-slot):• 5/16” - 18 x 1/2” Hex Head Cap Screws(31C50HCS5Z), 10 each.• 5/16” Lock Washers (31NLOCZ), 10 each.• Double Square Nuts (H0100721), 10 each.
.
TEKNO 3-14ADAPTER/JOINING PLATES
B05003213-Slot 90° Corner Joining Plate
Typical Use:• To connect 1 x 3, 2 x 3, and 3 x 3 SlotSupport Beams to one another at aperpendicular(90°) angle.
Features:• Recessed tabs allow for the accuratepositioning into beam T-slots to ensuresquareness of the joint.
Material:Mild Steel, Zinc Plated
Weight:0.93 lb [0.42 kg]
Hardware Recommended for Assembly:Standard Configuration:• 5/16” - 18 x 3/4” T-bolts (H0100121), 17each.• 5/16” Flat Washers (68N34WSDZ/089), 17each.• 5/16” - 18 Nylon Insert Thin Height LockNuts (31CNTEZ), 17 each.
Alternate configuration (used as a highloading capacity fastening method whichallows for easy lateral movement of thebracket and fasteners along the length of onebeam’s T-slot):• 5/16” - 18 x 1/2” Hex Head Cap Screws(31C50HCS5Z), 17 each.• 5/16” Lock Washers (31NLOCZ), 17 each.• Double Square Nuts (H0100721), 17 each.
.
TEKNOB0500421
1-Slot Heavy Duty CornerJoining Plate
Typical Use:• To connect all T-slotted Support Beams toone another at a perpendicular (90°) anglewith 4 fasteners per beam positionedlinearly.
Features:• Greater plate thickness for increasedstrength and rigidity.• Recessed tabs allow for the accuratepositioning into beam T-slots to ensuresquareness of the joint.
Material:Mild Steel, Zinc Plated
Weight:1.08 lbs [0.49 kg]
Hardware Recommended for Assembly:Standard Configuration:• 5/16” - 18 x 3/4” T-bolts (H0100121), 8each.• 5/16” Flat Washers (68N34WSDZ/089), 8each.• 5/16” - 18 Nylon Insert Thin Height LockNuts (31CNTEZ), 8 each.
Alternate configuration:• 4-Hole Joiner Strips (B0600311), 2 each.• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 8 each.• 5/16” Lock Washers (31NLOCZ), 8 each.
.
3-15ADAPTER/JOINING PLATES
TEKNO
B05005211-Slot 45° Right Hand Corner
Joining Plate
Typical Use:• To connect 1 x 1, 1 x 2, and 1 x 3 SlotSupport Beams to one another at a 45°angle.
Features:• Provides alignment of two support beamsat a 45° angle.• Recessed tabs allow for the accuratepositioning into beam T-slots to ensure acorrect joint angle.
Material:Mild Steel, Zinc Plated
Weight:0.41 lb [0.18 kg]
Hardware Recommended for Assembly:Standard Configuration:• 5/16” - 18 x 3/4” T-bolts (H0100121), 5each.• 5/16” Flat Washers (68N34WSDZ/089), 5each.• 5/16” - 18 Nylon Insert Thin Height LockNuts (31CNTEZ), 5 each.
Alternate configuration (used as a highloading capacity fastening method whichallows for easy lateral movement of thebracket and fasteners along the length of onebeam’s T-slot):• 5/16” - 18 x 1/2” Hex Head Cap Screws(31C50HCS5Z), 5 each.• 5/16” Lock Washers (31NLOCZ), 5 each.• Double Square Nuts (H0100721), 5 each.
.
3-16ADAPTER/JOINING PLATES
TEKNO3-17ADAPTER/JOINING PLATES
B05006211-Slot 45° Left Hand Corner Joining
Plate
Typical Use:• To connect 1 x 1, 1 x 2, and 1 x 3 SlotSupport Beams to one another at a 45° angle.
Features:• Provides alignment of two support beams at a45° angle.• Recessed tabs allow for the accuratepositioninginto beam T-slots to ensure a correct jointangle.
Material:Mild Steel, Zinc Plated
Weight:0.41 lb [0.18 kg]
Hardware Recommended for Assembly:Standard Configuration:• 5/16” - 18 x 3/4” T-bolts (H0100121), 5 each.• 5/16” Flat Washers (68N34WSDZ/089), 5each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 5 each.
Alternate configuration (used as a high loadingcapacity fastening method which allows for easylateral movement of the bracket and fastenersalong the length of one beam’s T-slot):• 5/16” - 18 x 1/2” Hex Head Cap Screws(31C50HCS5Z), 5 each.• 5/16” Lock Washers (31NLOCZ), 5 each.• Double Square Nuts (H0100721), 5 each.
.
TEKNO 3-18ADAPTER/JOINING PLATES
B05007212-Slot 45° Right Hand Corner
Joining Plate&
B05008212-Slot 45° Left Hand Corner
Joining Plate
Typical Use:• To connect 1 x 2, 2 x 2, and 2 x 3 SlotSupport Beams to one another at a 45°angle.
Features:• Provides alignment of two support beamsat a 45° angle.• Recessed tabs allow for the accuratepositioning into beam T-slots to ensure acorrect joint angle.
Material:Mild Steel, Zinc Plated
Weight:0.69 lb [0.32 kg]
Hardware Recommended for Assembly:Standard Configuration:• 5/16” - 18 x 3/4” T-bolts (H0100121), 10each.• 5/16” Flat Washers (68N34WSDZ/089), 10each.• 5/16” - 18 Nylon Insert Thin Height LockNuts (31CNTEZ), 10 each.
Alternate configuration (used as a highloading capacity fastening method whichallows for easy lateral movement of thebracket and fasteners along the length of onebeam’s T-slot):• 5/16” - 18 x 1/2” Hex Head Cap Screws(31C50HCS5Z), 10 each.• 5/16” Lock Washers (31NLOCZ), 10 each.• Double Square Nuts (H0100721), 10 each.
.
B0500721
B0500821
TEKNO3-19ADAPTER/JOINING PLATES
B05009213-Slot 45° Right Hand Corner
Joining Plate
Typical Use:• To connect 1 x 3, 2 x 3, and 3 x 3 SlotSupport Beams to one another at a 45°angle.
Features:• Provides alignment of two support beamsat a 45° angle.• Recessed tabs allow for the accuratepositioning into beam T-slots to ensure acorrect joint angle.
Material:Mild Steel, Zinc Plated
Weight:0.95 lb [0.43 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 3/4” T-bolts (H0100121), 15each.• 5/16” Flat Washers (68N34WSDZ/089), 15each.• 5/16” - 18 Nylon Insert Thin Height LockNuts (31CNTEZ), 15 each.
Alternate configuration (used as a highloading capacity fastening method whichallows for easy lateral movement of thebracket and fasteners along the length ofonebeam’s T-slot):• 5/16” - 18 x 1/2” Hex Head Cap Screws(31C50HCS5Z), 15 each.• 5/16” Lock Washers (31NLOCZ), 15 each.• Double Square Nuts (H0100721), 15 each.
.
TEKNO 3-20ADAPTER/JOINING PLATES
B05010213-Slot 45° Left Hand Corner Joining
Plate
Typical Use:• To connect 1 x 3, 2 x 3, and 3 x 3 SlotSupport Beams to one another at a 45°angle.
Features:• Provides alignment of two support beamsat a 45° angle.• Recessed tabs allow for the accuratepositioning into beam T-slots to ensure acorrect joint angle.
Material:Mild Steel, Zinc Plated
Weight:0.95 lb [0.43 kg]
Hardware Recommended for Assembly:Standard Configuration:• 5/16” - 18 x 3/4” T-bolts (H0100121), 15each.• 5/16” Flat Washers (68N34WSDZ/089), 15each.• 5/16” - 18 Nylon Insert Thin Height LockNuts (31CNTEZ), 15 each.
Alternate configuration (used as a highloading capacity fastening method whichallows for easy lateral movement of thebracket and fasteners along the length of onebeam’s T-slot):• 5/16” - 18 x 1/2” Hex Head Cap Screws(31C50HCS5Z), 15 each.• 5/16” Lock Washers (31NLOCZ), 15 each.• Double Square Nuts (H0100721), 15 each.
.
TEKNOB0501121
1 x 1 Joining Plate
Typical Use:• To mount 1 x 1 support beams side by sidefor guarding applications.
Features:• T-bolts secure the plate to the supportbeams for ease of assembly.
Material:Clear Anodized Aluminum
Weight:0.21 lb [0.10 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 3/4” T-bolts (H0100121), 4each.• 5/16” Flat Washers (68N34WSDZ/089), 4each.• 5/16” - 18 Nylon Insert Thin Height LockNuts (31CNTEZ), 4 each.
.
3.00” [76.20mm]
2.31” [58.72mm]0.69”
[17.45mm]
3.00”[76.20mm]
0.63”[15.88mm]
2.38”[60.33mm]
0.25”[6.35mm]
3-21ADAPTER/JOINING PLATES
TEKNO
B05012211 x 1 (4-Hole) Tee Joining Plate
Typical Use:• To mount 1 x 1 support beams in a Teeconfiguration for guarding applications.Features:• T-bolts secure the plate to the supportbeams for ease of assembly.
Material:Clear Anodized Aluminum
Weight:0.27 lb [0.12 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 3/4” T-bolts (H0100121), 4each.• 5/16” Flat Washers (68N34WSDZ/089), 4each.• 5/16” - 18 Nylon Insert Thin Height LockNuts (31CNTEZ), 4 each.
.
3-22ADAPTER/JOINING PLATES
TEKNO3-23ADAPTER/JOINING PLATES
B05013211 x 1 (6-Hole) Tee Joining Plate
Typical Use:• To mount 1 x 1 support beams side byside for guarding applications.Features:• T-bolts secure the plate to the supportbeams for ease of assembly.
Material:Clear Anodized Aluminum
Weight:0.39 lb [0.18 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 3/4” T-bolts (H0100121), 6each.• 5/16” Flat Washers (68N34WSDZ/089), 6each.• 5/16” - 18 Nylon Insert Thin Height LockNuts (31CNTEZ), 6 each.
.
TEKNO
Notes:
TEKNO
Strap Nuts Straight Joiner Strip
2 - Hole Strap NutB0600121Page 4-2
3 - Hole Strap NutB0600221Page 4-3 4 - Hole Joiner Strip
B0600311Page 4-4
Vertical Joiner Strips
30° Vertical JoinerStrip
B0600421Page 4-5
45° Vertical JoinerStrip
B0600521Page 4-6
60° Vertical JoinerStrip
B0600621Page 4-7
90° Vertical JoinerStrip
B0600721Page 4-8
Horizontal Joiner Strips
45° Horizontal JoinerStrip
B0600921Page 4-10
90° Horizontal JoinerStrip
B0601121Page 4-12
30° Horizontal JoinerStrip
B0600821Page 4-9
60° Horizontal JoinerStrip
B0601021Page 4-11
4-1 Strap Nuts & Joiner Strips
TEKNO
B06001212-Hole Strap Nut
Typical Use:• A high-loading fastening method whichallows for easy movement along the length ofa T-slot. The strap nut can function in placeof T-bolts or Double Strap Nuts on WebBrackets, Corner Tab Brackets, etc. when ahigher loading capacity is required.
Features:• Includes two pre-tapped holes for HexHead Cap Screws, Set Screws, or MachineScrews.
Material:Mild Steel, Zinc Plated
Weight:0.13 lb [0.06 kg]
Hardware Recommended for Assembly:For a Web Bracket:• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 2 each.• 5/16” Flat Washers (68N34WSDZ/089), 2each.
For a 45° Web or End Plate Bracket:• 5/16” - 18 x 3/4” Hex Head Cap Screws(31C75HCS5Z), 2 each.• 5/16” Flat Washers (68N34WSDZ/089), 2each.
For a Corner Tab Bracket:• 5/16” - 18 x 1/2” Hex Head Cap Screws(31C50HCS5Z), 2 each.• 5/16” Lock Washers (31NLOCZ), 2 each.
.
2.50” [63.50mm]
1.75”[44.45mm]
0.38”[9.52mm]
0.25”[6.35mm]
0.75[19.05mm]5/16-18
TAPPED(2 PLACES)
4-2Strap Nuts & Joiner Strips
TEKNOB0600221
3-Hole Strap Nut
Typical Use:• A high-loading fastening method whichallows for easy movement along the length ofa T-slot. The strap nut can function in placeof T-bolts or Double Strap Nuts on WebBrackets, Corner Tab Brackets, etc. when ahigher loading capacity is required. Whenused in this manner, the third pre-tappedhole, secured by a Set Screw, can serve tofurther prevent slippage of the parts along thelength of the T-slot.
Features:• Includes three pre-tapped holes for HexHead Cap Screws, Set Screws, or MachineScrews.
Material:Mild Steel, Zinc Plated
Weight:0.21 lb [0.10 kg]
Hardware Recommended for Assembly:For a Web Bracket:• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 2 each.• 5/16” - 18 x 5/16” Stainless Steel SetScrew (31C31KKCS), 1 each.• 5/16” Flat Washers (68N34WSDZ/089), 2each.
For a 45° Web or End Plate Bracket:• 5/16” - 18 x 3/4” Hex Head Cap Screws(31C75HCS5Z), 2 each.• 5/16” - 18 x 5/16” Stainless Steel SetScrew (31C31KKCS), 1 each.• 5/16” Flat Washers (68N34WSDZ/089), 2each.
For a Corner Tab Bracket:• 5/16” - 18 x 1/2” Hex Head Cap Screws(31C50HCS5Z), 2 each.• 5/16” Lock Washers (31NLOCZ), 2 each.
.
4.25” [107.95mm]
1.75”[44.45mm]
0.38”[9.52mm]
0.25”[6.35mm]
5/16-18TAPPED
(3 PLACES)
0.75”[19.05mm]
0.38”[9.52mm]
4-3 Strap Nuts & Joiner Strips
TEKNOB0600311
4-Hole Strap Nut
Typical Uses:• To mate and connect support beams in anend-to-end fashion when inserted into T-slots and fastened.• Can be used as a strap nut, a high-loadingfastening method which allows for easymovement along the length of a T-slot. Thestrap nut can function in place of T-boltsand Double Square Nuts on Web Brackets,Corner Tab Brackets, etc. when a higherloading capacity is required. When used inthis manner, the third and fourth pre-tappedholes, secured by Set Screws, can serve tofurther prevent slippage of the parts along thelength of the T-slot.
Features:• Four pre-tapped 5/16” holes accommodateSet Screws, Cap Screws, or Machine Screwsfor connecting beams and attachments.
Material:Mild Steel, Zinc Plated
Weight:0.32 lb [0.14 kg]
Hardware Included:• 5/16” - 18 x 5/16” Stainless Steel SetScrew (31C31KKCS), 4 each.
Hardware Recommended for Assembly:For use as a Joiner Strip to join two supportbeams end-to-end:• None (all set screws included).
For attaching to a 3-Slot 90° Corner TabBracket:• 5/16” - 18 x 1/2” Hex Head Cap Screws(31C50HCS5Z), 4 each.• 5/16” Lock Washers (31NLOCZ), 4 each.
.
6.00” [152.40mm]
1.75” [44.45mm]0.38”
[9.52mm]
5/16-18TAPPED
(4 PLACES)
0.38”[9.52mm]
0.75”[19.05mm]
0.25”[6.35mm]
4-4Strap Nuts & Joiner Strips
TEKNOB0600421
30° Vertical Joiner Strip
Typical Use:• To build a stable and neat frameworkcorner from two Support Beams mated andconnected end-to-end at a 30° mitered joint.The fitting is placed in the T-slots andclamped against the slot with Set Screws.
Features:• Four pre-tapped 5/16” holes accommodateSet Screws, Cap Screws, or MachineScrews for connecting beams and attach-ments.
Material:Mild Steel, Zinc Plated
Weight:0.20 lb [0.09 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 5/16” Stainless Steel SetScrews (31C31KKCS), 4 each.
Assembly Note:The ends of the two Support Beams have tobe cut at 15° to form the 30° mating angle.
.
4.34” [110.24mm]
2.13” [53.98mm]1.81”
[46.05mm]
30°
0.88” [22.23mm]
5/16-18TAPPED
(4 PLACES)
0.75”[19.05mm]
0.38”[9.52mm]
0.38”[9.52mm]
0.25”[6.35mm]
4-5Strap Nuts & Joiner Strips
TEKNOB0600521
45° Vertical Joiner Strip
Typical Use:• To build a stable and neat framework cornerfrom two Support Beams mated and con-nected end-to-end at a 45° mitered joint. Thefitting is placed in the T-slots and clampedagainst the slot with Set Screws.
Features:• Four pre-tapped 5/16” holes accommodateSet Screws, Cap Screws, or Machine Screwsfor connecting beams and attachments.
Material:Mild Steel, Zinc Plated
Weight:0.21 lb [0.10 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 5/16” Stainless Steel SetScrews (31C31KKCS), 4 each.
Assembly Note:The ends of the two Support Beams have tobe cut at 22.5° to form the 45° mating angle.
.
4.16” [105.61mm]
2.13” [53.98mm]
5/16-18TAPPED
(4 PLACES)
2.25” [57.23mm]
45°
0.88” [22.23mm]
0.75”[19.05mm]
0.38”[9.52mm]
0.38”[9.52mm]
0.25”[6.35mm]
4-6Strap Nuts & Joiner Strips
TEKNO
B060062160° Vertical Joiner Strip
Typical Use:• To build a stable and neat frameworkcorner from two Support Beams mated andconnected end-to-end at a 60° mitered joint.The fitting is placed in the T-slots andclamped against the slot with Set Screws.
Features:• Four pre-tapped 5/16” holes accommodateSet Screws, Cap Screws, or MachineScrews for connecting beams and attach-ments.
Material:Mild Steel, Zinc Plated
Weight:0.21 lb [0.10 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 5/16” Stainless Steel SetScrews (31C31KKCS), 4 each.
Assembly Note:The ends of the two Support Beams have tobe cut at 30° to form the 60° mating angle.
.3.84” [97.46mm]
5/16-18TAPPED
(4 PLACES)
2.59”[65.79mm]
60°
2.13” [53.98mm]0.38”
[9.52mm]
0.75”[19.05mm]
0.88”[22.23mm]
0.25”[6.35mm]
0.38”[9.52mm]
4-7Strap Nuts & Joiner Strips
TEKNOB0600721
90° Vertical Joiner Strip
Typical Use:• To build a stable and neat framework cornerfrom two Support Beams mated and con-nected end-to-end at a 90° mitered joint. Thefitting is placed in the T-slots and clampedagainst the slot with Set Screws.
Features:• Four pre-tapped 5/16” holes accommodateSet Screws, Cap Screws, or Machine Screwsfor connecting beams and attachments.
Material:Mild Steel, Zinc Plated
Weight:0.32 lb [0.14 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 5/16” Stainless Steel SetScrews (31C31KKCS), 4 each.
Assembly Note:The ends of the two Support Beams have tobe cut at 45° to form the 90° mating angle.
.
0.38”[9.52mm]
2.88”[73.03mm]
0.88”[22.35mm]
0.25”[6.35mm]
0.75”[19.05mm]
0.38”[9.52mm]
4-8Strap Nuts & Joiner Strips
TEKNOB0600821
30° Horizontal Joiner Strip
Typical Use:• An alternative to the 30° Vertical JoinerStrip to build a stable and neat frameworkcorner from two Support Beams mated andconnected end-to-end at a 30° mitered joint.The fitting is placed in the T-slots andclamped against the slot with Set Screws.
Features:• Four pre-tapped 5/16” holes accommodateSet Screws, Cap Screws, or MachineScrews for connecting beams and attachments.
Material:Mild Steel, Zinc Plated
Weight:0.19 lb [0.09 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 5/16” Stainless Steel SetScrews (31C31KKCS), 4 each.
Assembly Note:The ends of the two Support Beams have tobe cut at 15° to form the 30° mating angle
.
4-9Strap Nuts & Joiner Strips
TEKNOB0600921
45° Horizontal Joiner Strip
Typical Use:• An alternative to the 45° Vertical JoinerStrip to build a stable and neat frameworkcorner or joint from two Support Beamsmated and connected end-to-end or end-to-side. The fitting is placed in the T-slotsand clamped against the slot with SetScrews.
Features:• Four pre-tapped 5/16” holes accommodateSet Screws, Cap Screws, or Machine Screwsfor connecting beams and attachments.
Material:Mild Steel, Zinc Plated
Weight:0.19 lb [0.09 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 5/16” Stainless Steel SetScrews (31C31KKCS), 4 each.
Assembly Note:The 45° Horizontal Joiner Strip may connecttwo beams end-to-end or end-to-side usingtwo different configuration of beam cuts:
• Each end of the two Support Beams to bemated can be cut at 22.5° to form the 45°mating angle.
OR
• One Support Beam can be cut at a 45°miter joint and fastened along the side of theadjoining beam. This allows lateral position-ing of the mitered beam anywhere along thelength of the beam to which it is connected.
.
0.35”[8.76mm]
0.38”[9.52mm]
5/16-18TAPPED
(4 PLACES)
0.75”[19.05mm]
0.88” [22.23mm]
3.80” [96.62mm]
1.75”[44.53mm]
45°
0.25”[6.35mm]
4-10Strap Nuts & Joiner Strips
TEKNOB0601021
60° Horizontal Joiner Strip
Typical Use:• An alternative to the 60° Vertical JoinerStrip to build a stable and neat frameworkcorner or joint from two Support Beamsmated and connected end-to-end or endto-side. The fitting is placed in the T-slotsand clamped against the slot with SetScrews.
Features:• Four pre-tapped 5/16” holes accommodateSet Screws, Cap Screws, or Machine Screwsfor connecting beams and attachments.
Material:Mild Steel, Zinc Plated
Weight:0.19 lb [0.09 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 5/16” Stainless Steel SetScrews (31C31KKCS), 4 each.
Assembly Note:The 60° Horizontal Joiner Strip may connecttwo beams end-to-end or end-to-side usingtwo different configuration of beam cuts:• Each end of the two Support Beams to bemated can be cut at 30° to form the 60°mating angle.
OR
• One Support Beam can be cut at a 60°miter joint and fastened along the side of theadjoining beam. This allows lateral positioningof the mitered beam anywhere along thelength of the beam to which it is connected.
.
4-11Strap Nuts & Joiner Strips
TEKNOB0601121
90° Horizontal Joiner Strip
Typical Use:• An alternative to the 90° Vertical JoinerStrip to build a stable and neat frameworkcorner or joint from two Support Beamsmated and connected either end-to-end at a90° mitered joint or perpendicular to oneanother end-to-side with square ends. Thefitting is placed in the T-slots and clampedagainst the slot with Set Screws.
Features:• Four pre-tapped 5/16” holes accommodateSet Screws, Cap Screws, or Machine Screwsfor connecting beams and attachments.
Material:Mild Steel, Zinc Plated
Weight:0.19 lb [0.09 kg]
Hardware Recommended for Assembly:• 5/16” - 18 x 5/16” Stainless Steel SetScrews (31C31KKCS), 4 each.
Assembly Note:The 90° Horizontal Joiner Strip may connecttwo beams end-to-end or end-to-side usingtwo different configuration of beam cuts:
• Each end of the two Support Beams to bemated can be cut at 45° to form the 90°mating angle.
OR
• One Support Beam can be cut at a normal90° and fastened along the side of theadjoining beam. This allows lateralpositioning of the mitered beam anywherealong the length of the beam to which it isconnected.
.
5/16-18TAPPED
(4 PLACES)
0.38”[9.52mm]
0.35”[8.76mm]
0.75”[19.05mm]
0.88”[22.23mm]
0.25”[6.35mm]
2.38”[60..33mm]
4-12Strap Nuts & Joiner Strips
TEKNO
Stair Tread and WalkoversTekno’s Modu-Tek line also allows you to design and buildcompletely modular stair treads and walkovers for yourapplication. Built of the highest quality extruded anodizedaluminum, these structures provide lightweight, yet ultrasturdy platforms and staircases. Our tread plate materialis designed with a premium on safety; all of our treadplates feature raised rows of “teeth” for extra traction. Wealso offer vented tread plate that allows dirt and otheraccumulates to fall freely through the plate, virtuallyeliminating the risk of slippage. As is the case with anyModu-Tek product, these structures posess incredibleversatility and are easily configured/reconfigured for anyapplication; no drilling or tapping required! Call us today forfurther information on our Modu-Tek Walkovers and StairTreads!This Page
Intentionally LeftBlank
SUPPORT FEET & CASTERS
5-1
1X1 Slot CenterAngle Fixed Foot
H0200121Page 5-4
2X2 Slot CenterAngle Fixed Foot
H0200221Page 5-5
3x3 Slot CenterAngle Fixed Foot
H0200321Page 5-6
1X1 Slot LevelingFoot Support
H0200421Page 5-7
2X2 Slot LevelingFoot Support
H0200521Page 5-8
3X3 Slot LevelingFoot Support
H0200621Page 5-9
Teardrop LevelingFoot w/ 1/2”-13
StemH0200721Page 5-10
Teardrop LevelingFoot w/ 3/4”-10
StemH0200821Page 5-11
1X1 Slot TeardropLeveling Foot
AssemblyH0200921Page 5-12
2X2 Slot TeardropLeveling Foot
AssemblyH0201011Page 5-13
3X3 Slot TeardropLeveling Foot
AssemblyH0201111Page 5-14
All Metal Leveling Footwith 1/2”-13 Stem
H0201221Page 5-15
All Metal Leveling Footwith 3/4”-10 Stem
H0201321Page 5-16
Leveling Foot with1/2”-13 Stem & Jam Nut
H0201421Page 5-17
TEKNO
Rigid Casters
Rigid Caster with 5”Diameter Wheel
H0300421Page 5-21
Rigid Caster with 3”Diameter Wheel
H0300521Page 5-22
Rigid Caster Assemblies
1X1 Slot RigidCaster Assy.
H0300611Page 5-23
2X2 Slot RigidCaster Assy.
H0300711Page 5-24
3X3 Slot RigidCaster Assy.
H0300811Page 5-25
Rigid Caster Mounting Plates
1X1 Slot RigidCaster PlateH0300121Page 5-18
2X2 Slot RigidCaster PlateH0300221Page 5-19
3X3 RigidCaster PlateH0300321Page 5-20
Swivel Casters W/O Brakes
Swivel Casterwith
1/2” StemH0300921Page 5-26
Swivel Casterwith
3/4” StemH0301021Page 5-27
Swivel Casters with Brakes
Swivel Caster with1/2” Stemand BrakeH0301121Page 5-28
and BrakeH0301221Page 5-29
Swivel Caster with3/4” Stem
TEKNOTEKNOTEKNOTEKNOTEKNOSUPPORT FEET & CASTERS
5-2
Swivel Caster Assemblies W/O Brakes
1X1 Slot Swivel CasterAssemblyH0301311Page 5-30
2X2 Slot Swivel CasterAssemblyH0301411Page 5-31
3X3 Slot Swivel CasterAssemblyH0301511Page 5-32
Swivel Caster Assemblies with Brakes
1X1 Slot Swivel CasterAssembly with Brake
H0301611Page 5-33
2X2 Slot Swivel CasterAssembly with Brake
H0301711Page 5-34
3X3 slot Swivel CasterAssembly with Brake
H0301811Page 5-35
TEKNOTEKNOTEKNOTEKNOTEKNO SUPPORT FEET & CASTERS
5-3
TEKNO5-4SUPPORT FEET & CASTERS
H02001211 x 1 Slot Center Angle
Fixed Foot
Typical Use:• Fixed support base for 1 x 1 slot supportbeam legs. Primarily designed for guardingand lighter-weight, non-load bearing applica-tions.
Features:• Solid base for mounting beam to the floorto provide and anchor for machine guarding,benches, etc.• T-slots on two sides of the support beamare accessible to within 0.25” [6.35mm] ofthe floor.• Pre-drilled holes for lagging to the floor.
Material:Hot Rolled Steel, Black Powder Coated
Weight:3.75 lbs [1.70 kgs]
Hardware Recommended for Assembly:For attachment to support beam:• 5/16” - 18 x 5/8” Button Head Cap Screws(31C62KBC), 4 each.• Double Square Nuts (H0100721), 4 each.
OR
• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 4 each.• Double Square Nuts (H0100721), 4 each.
For attachment to floor:• 3/8” diameter x 3 3/4” length WedgeAnchors (37C375AWG), 4 each.
.
4.00” [101.60mm]
1.00” [25.40mm]
0.25” [6.35mm]
Ø0.53” [Ø13.46mm](4 PLACES)
1.94” [49.23mm]
Ø0.34” [Ø8.64mm](4 PLACES)
0.81” [20.62mm]
6.25” [158.75mm]4.75” [120.65mm]
1.25” [31.75mm]0.25” [6.35mm]
TEKNO 5-5SUPPORT FEET & CASTERS
H02002212 x 2 Slot Center Angle
Fixed Foot
Typical Use:• Fixed support base for 2 x 2 slot supportbeam legs. Primarily designed for guardingand lighter-weight, non-load bearingapplications.
Features:• Solid base for mounting beam to the floorto provide and anchor for machine guarding,benches, etc.• T-slots on two sides of the support beamare accessible to within 0.25” [6.35mm] ofthe floor.• Pre-drilled holes for lagging to the floor.
Material:Hot Rolled Steel, Black Powder Coated
Weight:4.50 lbs [2.04 kgs]
Hardware Recommended for Assembly:For attachment to support beam:• 5/16” - 18 x 5/8” Button Head Cap Screws(31C62KBC), 8 each.• Double Square Nuts (H0100721), 8 each.
OR
• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 8 each.• Double Square Nuts (H0100721), 8 each.For attachment to floor:• 3/8” diameter x 3 3/4” length WedgeAnchors (37C375AWG), 4 each.
.
TEKNO5-6SUPPORT FEET & CASTERS
H02003213 x 3 Slot Center Angle
Fixed Foot
Typical Use:• Fixed support base for 3 x 3 slot supportbeam legs. Primarily designed for guardingand lighter-weight, non-load bearing applica-tions.
Features:• Solid base for mounting beam to the floorto provide and anchor for machine guarding,benches, etc.• T-slots on two sides of the support beamare accessible to within 0.25” [6.35mm] of thefloor.• Pre-drilled holes for lagging to the floor.
Material:Hot Rolled Steel, Black Powder Coated
Weight:8.00 lbs [3.63 kgs]
Hardware Recommended for Assembly:For attachment to support beam:• 5/16” - 18 x 5/8” Button Head Cap Screws(31C62KBC), 8 each.• Double Square Nuts (H0100721), 8 each.
OR
• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 8 each.• Double Square Nuts (H0100721), 8 each.
For attachment to floor:• 3/8” diameter x 3 3/4” length WedgeAnchors (37C375AWG), 4 each.
.
6.00” [152.40mm]
Ø0.53” [Ø13.46mm](4 PLACES)1.00” [25.40mm]
0.25”[6.35mm]
2.06” [52.40mm]
Ø0.34” [Ø8.64mm](8 PLACES)
5.50” [139.70mm]
1.25” [31.75mm]
0.25” [6.35mm]
8.25” [209.55mm]
TEKNO 5-7SUPPORT FEET & CASTERS
H02004211 x 1 Slot Leveling
Foot Support
Typical Use:• Mounts to 1 x 1 slot support beams toprovide a base for the foot.
Features:• Pre-drilled holes for mounting to 1 x 1 slotsupport beam.• Tapped hole which accepts a 1/2” shaft forvertical adjustment.
Material:Pressure Die-cast Aluminum
Weight:0.13 lb [0.06 kg]
Hardware Recommended for Assembly:• 1/4” - 20 x 5/8” Socket Head Cap Screws(25C62KCSS), 4 each.
Assembly Note:• Surface “A” must be assembled flush withthe end of the 1 x 1 Slot Support Beam, i.e.the flange will not fit into the extrusion cavityfor reverse mounting.
.
TEKNO5-8SUPPORT FEET & CASTERS
H02005212 x 2 Slot Leveling
Foot Support
Typical Use:• Mounts to 2 x 2 slot support beams toprovide a base for the foot.
Features:• Pre-drilled holes for mounting to 2 x 2 slotsupport beam.• Tapped hole which accepts a 3/4” shaft forvertical adjustment.
Material:Pressure Die-cast Aluminum
Weight:0.25 lb [0.11 kg]
Hardware Recommended for Assembly:• 1/4” - 20 x 5/8” Socket Head Cap Screws(25C62KCSS), 4 each.
Assembly Note:• Unlike the 1 x 1 Slot Leveling FootSupport, either the top or the bottom surfacecan be assembled flush with the end of the2 x 2 Slot Support Beam, i.e. the flange willfit into the extrusion cavity for reversemounting.
.
TEKNO 5-9SUPPORT FEET & CASTERS
H02006213 x 3 Slot Leveling
Foot Support
Typical Use:• Mounts to 3 x 3 slot support beams toprovide a base for the foot.
Features:• Pre-drilled holes for mounting to 3 x 3 slotsupport beam.• Tapped hole which accepts a 3/4” shaft forvertical adjustment.
Material:Pressure Die-cast Aluminum
Weight:0.41 lb [0.18 kg]
Hardware Recommended for Assembly:• 1/4” - 20 x 5/8” Socket Head Cap Screws(25C62KCSS), 4 each.
Assembly Note:• Unlike the 1 x 1 Slot Leveling Foot Support,either the top or the bottom surface can beassembled flush with the end of the 3 x 3 SlotSupport Beam, i.e. the flange will fit into theextrusion cavity for reverse mounting.
.
TEKNOH0200721
Teardrop Leveling Foot1/2” - 13 Stem
Typical Use:• Leveling foot for support beam legs.Specifically designed for mating with 1 x 1Slot Leveling Foot Supports.
Features:• Three holes in the base for use in laggingto the floor.• Teardrop shape facilitates lagging whenclearance for lag bolt drilling is needed.• Easy height adjustment with 1/2” mountingrod and included adjustment nut.
Weight Capacity:1,200 lbs [544 kgs] static load
Materials:• Stem & Leveling Nut: Zinc-plated Steel• Base: Glass-filled Nylon
Weight:1.00 lb [0.45 kg]
Hardware Recommended for Assembly:• None.Hardware Recommended for Attachmentto the Floor:• 3/8” diameter x 3 3/4” length WedgeAnchors (37C375AWG), 3 each.
.
5-10SUPPORT FEET & CASTERS
TEKNO 5-11SUPPORT FEET & CASTERS
H0200821Teardrop Leveling Foot
3/4” - 10 Stem
Typical Use:• Leveling foot for support beam legs.Specifically designed for mating with 2 x 2and 3 x 3 Slot Leveling Foot Supports.Intended for supporting heavier loads.
Features:• Three holes in the base for use in laggingto the floor.• Teardrop shape facilitates lagging whenclearance for lag bolt drilling is needed.• Easy height adjustment with 3/4” mountingrod and included adjustment nut.
Weight Capacity:1,800 lbs [816 kgs] static load
Materials:• Stem & Leveling Nut: Zinc-plated Steel• Base: Glass-filled Nylon
Weight:1.50 lbs [0.68 kg]
Hardware Recommended for Assembly:• None.Hardware Recommended for Attachmentto the Floor:• 3/8” diameter x 3 3/4” length WedgeAnchors (37C375AWG), 3 each.
.
TEKNOH0200911
1 x 1 Slot Teardrop Leveling FootAssembly
Typical Use:• Leveling foot and accompanying 1 x 1 SlotLeveling Foot Support and hardware specificallydesigned for mating with 1 x 1 SlotSupport Beam legs.
Features:• Three holes in the base for use in laggingto the floor.• Teardrop shape facilitates lagging whenclearance for lag bolt drilling is needed.• Easy height adjustment with 1/2” mountingrod and included adjustment nut.• Mounting hardware included as describedbelow.
Weight Capacity:1,200 lbs [544 kgs] static load
Materials:• Stem & Leveling Nut: Zinc-plated Steel• Base: Glass-filled Nylon• Support (provides mounting surface forsupport beam): Pressure Die-cast Aluminum• Socket Head Cap Screws: 18 - 8 StainlessSteel
Weight:1.20 lbs [0.54 kg]
Hardware Included:• Teardrop Leveling Foot with 1/2” - 13 Stem(H0200721), 1 each.• 1 x 1 Slot Leveling Foot Support(H0200421), 1 each.• 1/4 - 20 x 1 PanTorx Type F Plated(25C100PTFZ), 4 each.• 1/2” - 13 Standard Hex Nut (50CNFHZ), 1each.
Hardware Recommended for Attachmentto the Floor:• 3/8” diameter x 3 3/4” length WedgeAnchors (37C375AWG), 3 each.
.
5-12SUPPORT FEET & CASTERS
TEKNO SUPPORT FEET & CASTERS
Notes:
TEKNO5-13SUPPORT FEET & CASTERS
H02010112 x 2 Slot Teardrop Leveling Foot
Assembly
Typical Use:• Leveling foot and accompanying 2 x 2 SlotLeveling Foot Support and hardware specificallydesigned for mating with 2 x 2 SlotSupport Beam legs.
Features:• Three holes in the base for use in laggingto the floor.• Teardrop shape facilitates lagging whenclearance for lag bolt drilling is needed.• Easy height adjustment with 3/4” mountingrod and included adjustment nut.• Mounting hardware included as describedbelow.
Weight Capacity:1,800 lbs [816 kgs] static load
Materials:• Stem & Leveling Nut: Zinc-plated Steel• Base: Glass-filled Nylon• Support (provides mounting surface forsupport beam): Pressure Die-cast Aluminum• Socket Head Cap Screws: 18 - 8 StainlessSteel
Weight:1.80 lbs [0.82 kg]
Hardware Included:• Teardrop Leveling Foot with 3/4” - 10 Stem(H0200821), 1 each.• 2 x 2 Slot Leveling Foot Support(H0200521), 1 each.• 1/4 - 20 x 1 PanTorx Type F Plated(25C100PTFZ), 4 each.• 3/4” - 10 Standard Hex Nut (75CNFHZ), 1each.
Hardware Recommended for Attachmentto the Floor:• 3/8” diameter x 3 3/4” length WedgeAnchors (37C375AWG), 3 each.
.
TEKNO 5-14SUPPORT FEET & CASTERS
H02011113 x 3 Slot Teardrop Leveling Foot
Assembly
Typical Use:• Leveling foot and accompanying 3 x 3 SlotLeveling Foot Support and hardware specifi-cally designed for mating with 3 x 3 SlotSupport Beam legs.
Features:• Three holes in the base for use in laggingto the floor.• Teardrop shape facilitates lagging whenclearance for lag bolt drilling is needed.• Easy height adjustment with 3/4” mountingrod and included adjustment nut.• Mounting hardware included as describedbelow.
Weight Capacity:1,800 lbs [816 kgs] static load
Materials:• Stem & Leveling Nut: Zinc-plated Steel• Base: Glass-filled Nylon• Support (provides mounting surface forsupport beam): Pressure Die-cast Aluminum• Socket Head Cap Screws: 18 - 8 StainlessSteel
Weight:2.00 lbs [0.91 kg]
Hardware Included:• Teardrop Leveling Foot with 3/4” - 10 Stem(H0200821), 1 each.• 3 x 3 Slot Leveling Foot Support(H0200621), 1 each.• 1/4 - 20 x 1 PanTorx Type F Plated(25C100PTFZ), 4 each.• 3/4” - 10 Standard Hex Nut (75CNFHZ), 1each.
Hardware Recommended for Attachmentto the Floor:• 3/8” diameter x 3 3/4” length WedgeAnchors (37C375AWG), 3 each.
.
6.75” [171.45mm]
3.88” [98.43mm]0.50”
[12.70mm]0.53”
[13.46mm]
3.69”[93.73mm]
4.75”[120.65mm]Ø0.50”
[Ø12.70mm](3 PLACES)
2.22” [56.49mm]UPWARD ADJUSTMENT
0.92” [23.42mm]DOWNWARD ADJUSTMENT
6.00”[152.40mm]
8.22”[208.89mm]
TEKNO5-15SUPPORT FEET & CASTERS
H0201221All Metal Leveling Foot with 1/2” -
13 Stem
Typical Use:• Leveling foot for support beam legs.Specifically designed for mating with 1 x 1Slot Leveling Foot Supports (H0200421).
Features:• Easy height adjustment with includedadjustment nut.
Weight Capacity:5,000 lbs [2,268 kgs] static load
Material:Yellow Zinc-plated Steel
Weight:0.50 lb [0.23 kg]
Hardware Recommended for Assembly:• None.
.
TEKNO 5-16SUPPORT FEET & CASTERS
H0201321All Metal Leveling Foot with 3/4” -
10 Stem
Typical Use:• Leveling foot for support beam legs.Specifically designed for mating with 2 x 2and 3 x 3 Slot Leveling Foot Supports(H0200521 & H0200621 respectively).
Features:• Easy height adjustment with includedadjustment nut.
Weight Capacity:7,400 lbs [3,357 kgs] static load
Material:Yellow Zinc-plated Steel
Weight:1.75 lbs [0.79 kg]
Hardware Recommended for Assembly:• None.
.
TEKNO5-17SUPPORT FEET & CASTERS
H0201421Leveling Foot with
1/2” - 13 Stem
Typical Use:• Leveling foot for the support of light dutyapplications such as table top applications,small tables, etc.
Features:• Non-skid base.• Easy height adjustment with screw driverand included adjustment nut.
Weight Capacity:700 lbs [318 kgs] static load
Materials:• Stem & Shell: Chrome-plated Steel• Base: Grey Nylon
Weight:0.24 lb [0.11 kg]
Hardware Recommended for Assembly:• None.
.
TEKNO 5-18SUPPORT FEET & CASTERS
H03001211 x 1 Slot Rigid Caster Adapter
Plate
Typical Use:• To connect a rigid caster to a 1 x 1 SlotSupport Beam.
Features:• Provides a transition plate for the mountingof an appropriate rigid caster to the end of a 1x 1 Support Beam.
Material:• Clear Anodized Aluminum
Weight:0.39 lb [0.18 kg]
Hardware Recommended for Assembly:• 1/4” - 20 x 1” Socket Head Cap Screws(25C100KCSS), 4 each.
.
TEKNO5-19SUPPORT FEET & CASTERS
H03002212 x 2 Slot Rigid Caster Adapter
Plate
Typical Use:• To connect a rigid caster to a 2 x 2 SlotSupport Beam.
Features:• Provides a transition plate for the mountingof an appropriate rigid caster to the end of a 2x 2 Support Beam.
Material:• Clear Anodized Aluminum
Weight:0.41 lb [0.19 kg]
Hardware Recommended for Assembly:• 1/4” - 20 x 1” Socket Head Cap Screws(25C100KCSS), 4 each.
.
TEKNO 5-20SUPPORT FEET & CASTERS
H03003213 x 3 Slot Rigid Caster Adapter
Plate
Typical Use:• To connect a rigid caster to a 3 x 3 SlotSupport Beam.
Features:• Provides a transition plate for the mountingof an appropriate rigid caster to the end of a 3x 3 Support Beam.
Material:• Clear Anodized Aluminum
Weight:0.57 lb [0.26 kg]
Hardware Recommended for Assembly:• 1/4” - 20 x 1” Socket Head Cap Screws(25C100KCSS), 4 each.
.
TEKNO5-21SUPPORT FEET & CASTERS
H0300521Rigid Caster with 3.0 in
[76.2 mm] Diameter Wheel
Typical Use:• Fixed caster with a 3.0 in [76.2 mm] wheelfor mating with a 1 x 1 Slot Rigid CasterAdapter Plate (B0500121).
Features:• Heavy gauge cold rolled steel, formed forstrength.
Weight Capacity:150 lbs [68 kgs]
Materials:• Wheel: Cushion Tread Rubber.• Housing: Mild Steel, Bright Zinc Plated.
Weight:1.69 lbs [0.77 kg]
Hardware Recommended for Assembly:• 1/4” - 20 x 5/8” Socket Head Cap Screws(25C62KCSS), 4 each.
.
TEKNO 5-22SUPPORT FEET & CASTERS
H0300421Rigid Caster with 5.0 in [127.0 mm]
Diameter Wheel
Typical Use:• Fixed caster with a 5.0 in [127.0 mm]wheel for mating with a 2 x 2 or 3 x 3 SlotRigid Caster Mounting Plate (H0300211 &H0300321 respectively).
Features:• Heavy gauge cold rolled steel, formed forstrength.
Weight Capacity:200 lbs [91 kgs]
Materials:• Wheel: Cushion Tread Rubber.• Housing: Mild Steel, Bright Zinc Plated.
Weight:2.00 lbs [0.91 kg]
Hardware Recommended for Assembly:• 1/4” - 20 x 5/8” Socket Head Cap Screws(25C62KCSS), 4 each.
.
TEKNO5-23SUPPORT FEET & CASTERS
H03006111 x 1 Slot Rigid Caster Assembly
Typical Use:• Assembly mounts to the end of a 1 x 1 SlotSupport Beam (E0100201) to provide fixedcaster mobility.
Features:• All mounting hardware included.
Weight Capacity:150 lbs [68 kgs]
Materials:• Wheel: Cushion Tread Rubber.• Housing: Mild Steel, Bright Zinc Plated.• Mounting Plate: Clear Anodized Aluminum.
Weight:2.50 lbs [1.13 kgs]
Assembly Hardware Included:• Rigid Caster with 3.0” [76.2mm] DiameterWheel (MEAAD0700V015), 1 each.• 1 x 1 Slot Rigid Caster Adapter Plate(H0300121), 1 each.• 1/4” - 20 x 1” Socket Head Cap Screws(25C100KCSS), 4 each.• 1/4” - 20 x 5/8” Socket Head Cap Screws(25C62KCSS), 4 each.
Hardware Recommended for Assembly:• None.
.
3.63” [92.08mm]
0.50” [12.70mm]
4.13” [104.78mm]
Ø3.00” [Ø76.20mm]
2.38” [60.33mm]
TEKNO 5-24SUPPORT FEET & CASTERS
H03007112 x 2 Slot Rigid Caster Assembly
Typical Use:• Assembly mounts to the end of a 2 x 2 SlotSupport Beam (E0100501) to provide fixedcaster mobility.
Features:• All mounting hardware included.
Weight Capacity:200 lbs [91 kgs]
Materials:• Wheel: Cushion Tread Rubber.• Housing: Mild Steel, Bright Zinc Plated.• Mounting Plate: Clear Anodized Aluminum.
Weight:3.00 lbs [1.36 kgs]
Assembly Hardware Included:• Rigid Caster with 5.0 in [127.0 mm]Diameter Wheel (MEAAD0700V016), 1 each.• 2 x 2 Slot Rigid Caster Adapter Plate(H0300211), 1 each.• 1/4” - 20 x 1” Socket Head Cap Screws(25C100KCSS), 4 each.• 1/4” - 20 x 5/8” Socket Head Cap Screws(25C62KCSS), 4 each.
Hardware Recommended for Assembly:• None.
.
TEKNO5-25SUPPORT FEET & CASTERS
H03008113 x 3 Slot Rigid Caster Assembly
Typical Use:• Assembly mounts to the end of a 3 x 3 SlotSupport Beam (E0100701) to provide fixedcaster mobility.
Features:• All mounting hardware included.
Weight Capacity:200 lbs [91 kgs]
Materials:• Wheel: Cushion Tread Rubber.• Housing: Mild Steel, Bright Zinc Plated.• Mounting Plate: Clear Anodized Aluminum.
Weight:3.94 lbs [1.79 kgs]
Assembly Hardware Included:• Rigid Caster with 5.0 in [127.0 mm]Diameter Wheel (MEAAD0700V016), 1 each.• 3 x 3 Slot Rigid Caster Adapter Plate(H0300321), 1 each.• 1/4” - 20 x 1” Socket Head Cap Screw(25C100KCSS), 4 each.• 1/4” - 20 x 5/8” Socket Head Cap Screw(25C62KCSS), 4 each.
Hardware Recommended for Assembly:• None.
.
3.63” [92.08mm] 3.38” [85.73mm]
0.50” [12.70mm]
6.25” [158.75mm]
Ø5.00”[Ø127.00mm]
TEKNO 5-26SUPPORT FEET & CASTERS
H0300921Swivel Caster with 1/2” Stem
Typical Use:• Caster with a 1/2” stem for mating with a 1x 1 Slot Leveling Foot Support.
Features:• Caster swivels 180° upon double ballbearings and hardened raceways.
Weight Capacity:150 lbs [68 kgs]
Materials:• Wheel: Cushion Tread Rubber.• Housing: Mild Steel, Bright Zinc Plated.
Weight:1.56 lbs [0.71 kg]
Hardware Recommended for Assembly:• 9/16” x 2 1/2” Caster Washer(56N250WSDZ/125), 1 each..
TEKNO5-27SUPPORT FEET & CASTERS
H0301021Swivel Caster with 3/4” Stem
Typical Use:• Caster with a 3/4” stem for mating with 2x 2 and 3 x 3 Slot Leveling Foot Supports.
Features:• Caster swivels 180° upon double ballbearings and hardened raceways.
Weight Capacity:200 lbs [91 kgs]
Materials:• Wheel: Cushion Tread Rubber.• Housing: Mild Steel, Bright Zinc Plated.
Weight:2.06 lbs [0.94 kg]
Hardware Recommended for Assembly:• 13/16” x 2 1/2” Caster Washer(81N250WSDZ/125), 1 each.
.
TEKNO 5-28SUPPORT FEET & CASTERS
H0301121Swivel Caster with 1/2” Stem with
Brake
Typical Use:• Brakeable caster with a 1/2” stem formating with a 1 x 1 Slot Leveling FootSupport.
Features:• Caster swivels 180° upon double ballbearings and hardened raceways.• Built-in brake mechanism.
Weight Capacity:150 lbs [68 kgs]
Materials:• Wheel: Cushion Tread Rubber.• Housing: Mild Steel, Bright Zinc Plated.
Weight:1.69 lbs [0.77 kg]
Hardware Recommended for Assembly:• 9/16” x 2 1/2” Caster Washer(56N250WSDZ/125), 1 each.
.
TEKNO5-29SUPPORT FEET & CASTERS
H0301221Swivel Caster with 3/4” Stem with
Brake
Typical Use:• Brakeable caster with a 3/4” stem formating with 2 x 2 and 3 x 3 Slot Leveling FootSupports.
Features:• Caster swivels 180° upon double ballbearings and hardened raceways.• Built-in brake mechanism.
Weight Capacity:200 lbs [91 kgs]
Materials:• Wheel: Cushion Tread Rubber.• Housing: Mild Steel, Bright Zinc Plated.
Weight:2.81 lbs [1.28 kgs]
Recommended Hardware for Assembly:• 13/16” x 2 1/2” Caster Washer(81N250WSDZ/125), 1 each.
.
TEKNO 5-30SUPPORT FEET & CASTERS
H03013111 x 1 Slot Swivel Caster Assembly
Typical Use:• Assembly mounts to the end of a 1 x 1Slot Support Beam to provide swivel castermobility.
Features:• Caster swivels 180° upon double ballbearings and hardened raceways.• 1/2” diameter rod.• Mounting hardware included.
Weight Capacity:150 lbs [68 kgs]
Materials:• Wheel: Cushion Tread Rubber.• Housing: Mild Steel, Bright Zinc Plated.
Weight:1.75 lbs [0.79 kg]
Assembly Hardware Included:• Swivel Caster with 1/2” - 13 Stem(H0300921), 1 each.• 1 x 1 Slot Leveling Foot Support(H0200421), 1 each.• 1/4 - 20 x 1 PanTorx Type F Plated(25C100PTFZ), 4 each.• 9/16” x 2 1/2” Caster Washer(56N250WSDZ/125), 1 each.
Hardware Recommended for Assembly:• None.
.
TEKNO5-31SUPPORT FEET & CASTERS
H03014112 x 2 Slot Swivel Caster Assembly
Typical Use:• Assembly mounts to the end of a 2 x 2 SlotSupport Beam to provide swivel castermobility.
Features:• Caster swivels 180° upon double ballbearings and hardened raceways.• 3/4” diameter rod.• Mounting hardware included.
Weight Capacity:200 lbs [91 kgs]
Materials:• Wheel: Cushion Tread Rubber.• Housing: Mild Steel, Bright Zinc Plated.
Weight:2.88 lbs [1.30 kgs]
Assembly Hardware Included:• Swivel Caster with 3/4” - 10 Stem(H0301021), 1 each.• 2 x 2 Slot Leveling Foot Support(H0200521), 1 each.• 1/4 - 20 x 1 PanTorx Type F Plated(25C100PTFZ), 4 each.• 13/16” x 2 1/2” Caster Washer(81N250WSDZ/125), 1 each.
Hardware Recommended for Assembly:• None.
.
TEKNO 5-32SUPPORT FEET & CASTERS
H03015113 x 3 Slot Swivel Caster Assembly
Typical Use:• Assembly mounts to the end of a 3 x 3Slot Support Beam to provide swivel castermobility.
Features:• Caster swivels 180° upon double ballbearings and hardened raceways.• 3/4” diameter rod.• Mounting hardware included.
Weight Capacity:200 lbs [91 kgs]
Materials:• Wheel: Cushion Tread Rubber.• Housing: Mild Steel, Bright Zinc Plated.
Weight:3.00 lbs [1.36 kgs]
Assembly Hardware Included:• Swivel Caster with 3/4” - 10 Stem(H0301021), 1 each.• 3 x 3 Slot Leveling Foot Support(H0200621), 1 each.• 1/4 - 20 x 1 PanTorx Type F Plated(25C100PTFZ), 4 each.• 13/16” x 2 1/2” Caster Washer(81N250WSDZ/125), 1 each.
Hardware Recommended for Assembly:• None
.
TEKNO5-33SUPPORT FEET & CASTERS
H03016111 x 1 Slot Swivel Caster Assembly
with Brake
Typical Use:• Assembly mounts to the end of a 1 x 1 SlotSupport Beam to provide brakeable swivelcaster mobility.
Features:• Caster swivels 180° upon double ballbearings and hardened raceways.• 1/2” diameter rod.• Built-in on/off brake mechanism.• Mounting hardware included.
Weight Capacity:150 lbs [68 kgs]
Materials:• Wheel: Cushion Tread Rubber.• Housing: Mild Steel, Bright Zinc Plated.
Weight:1.88 lbs [0.85 kg]
Assembly Hardware Included:• Swivel Caster with 1/2” - 13 Stem withBrake (H0301121), 1 each.• 1 x 1 Slot Leveling Foot Support(H0200421), 1 each.• 1/4 - 20 x 1 PanTorx Type F Plated(25C100PTFZ), 4 each.• 9/16” x 2 1/2” Caster Washer(56N250WSDZ/125), 1 each.
Hardware Recommended for Assembly:• None.
.
1/2” - 13 X 1 1/2”STEM
3.96” [100.66mm]SWIVEL RADIUS
1.38” [35.05mm]OFFSET
Ø3.00”[Ø76.20mm]
WHEEL
4.80” [121.82mm]LOAD HEIGHT
1.50” [38.02mm]
3.94” [100.00mm]
TEKNO 5-34SUPPORT FEET & CASTERS
H03017112 x 2 Slot Swivel Caster Assembly
with Brake
Typical Use:• Assembly mounts to the end of a 2 x 2 SlotSupport Beam to provide brakeable swivelcaster mobility.
Features:• Caster swivels 180° upon double ballbearings and hardened raceways.• 3/4” diameter rod.• Built-in on/off brake mechanism.• Mounting hardware included.
Weight Capacity:200 lbs [91 kgs]
Materials:• Wheel: Cushion Tread Rubber.• Housing: Mild Steel, Bright Zinc Plated.
Weight:3.00 lbs [1.36 kgs]
Assembly Hardware Included:• Swivel Caster with 3/4” - 10 Stem withBrake (H0301221), 1 each.• 2 x 2 Slot Leveling Foot Support(H0200521), 1 each.• 1/4 - 20 x 1 PanTorx Type F Plated(25C100PTFZ), 4 each.• 13/16” x 2 1/2” Caster Washer(81N250WSDZ/125), 1 each.
Hardware Recommended for Assembly:• None.
.
TEKNOH0301811
3 x 3 Slot Swivel Caster Assemblywith Brake
Typical Use:• Assembly mounts to the end of a 3 x 3 SlotSupport Beam to provide brakeable swivelcaster mobility.
Features:• Caster swivels 180° upon double ballbearings and hardened raceways.• 3/4” diameter rod.• Built-in on/off brake mechanism.• Mounting hardware included.
Weight Capacity:200 lbs [91 kgs]
Materials:• Wheel: Cushion Tread Rubber.• Housing: Mild Steel, Bright Zinc Plated.
Weight:3.19 lbs [1.45 kgs]
Assembly Hardware Included:• Swivel Caster with 3/4” - 10 Stem withBrake (H0301221), 1 each.• 3 x 3 Slot Leveling Foot Support(H0200621), 1 each.• 1/4 - 20 x 1 PanTorx Type F Plated(25C100PTFZ), 4 each.• 13/16” x 2 1/2” Caster Washer(81N250WSDZ/125), 1 each.
Hardware Recommended for Assembly:• None.
.
3/4” - 10 X 1 3/4”STEM
4.47” [113.49mm]SWIVEL RADIUS
1.44” [36.53mm]OFFSET
Ø5.00”[Ø127.00mm]
WHEEL
7.58” [192.56mm]LOAD HEIGHT
6.06” [153.87mm]
1.75” [44.45mm]
5-35SUPPORT FEET & CASTERS
TEKNO SUPPORT FEET & CASTERS
Notes:
TEKNO
Stair Tread and WalkoversTekno’s Modu-Tek line also allows you to design and buildcompletely modular stair treads and walkovers for yourapplication. Built of the highest quality extruded anodizedaluminum, these structures provide lightweight, yet ultrasturdy platforms and staircases. Our tread plate materialis designed with a premium on safety; all of our treadplates feature raised rows of “teeth” for extra traction. Wealso offer vented tread plate that allows dirt and otheraccumulates to fall freely through the plate, virtuallyeliminating the risk of slippage. As is the case with anyModu-Tek product, these structures posess incredibleversatility and are easily configured/reconfigured for anyapplication; no drilling or tapping required! Call us today forfurther information on our Modu-Tek Walkovers and StairTreads!This Page
Intentionally LeftBlank
TEKNO 6-1ASSEMBLY HARDWARE
T - Bolts Set Screws
Nuts
Torx Screw
T - BoltsPart Nos. Shown in TBOLT
Ordering ChartPage 6-3
Cup Point Socket SetScrews
Part Nos. Shown inSHSS Ordering Chart
Page 6-4
Nylon insert HextLock Nuts
Part Nos. Shown inHLNUT Ordering Chart
Page 6-4
Thin Spring StrutNuts
Part Nos. Shown inSPRING NUT Ordering
ChartPage 6-6
Double Square Nut-5/16”-18 & 1/4”-20
H0100721Page 6-6
Torx Screw1/4-20x1
25C100PTFZPage 6-7
Flange Nut5/16”-18
31CNNEFWPage 6-5
6 Lobe Flat Head ThreadCutting Cap Screw, Type F
1/4” - 20 x 1 1/4”25C125TTFPage 6-4
Self Tapping Screws
Self Tapping ScrewFor Guide Rail
#8 x 1/4”8N25TPCPage 6-4
Screws
Flat Head Cap Screw1/2” - 13 x 7/8”
50C88KFCPage 6-5
Flat WashersPart Nos. Shown inFWASHER Ordering
Chart Page 6-7
Flat Caster WashersPart Nos. Shown inFCWasher Ordering
ChartPage 6-5
Washers
Lock WashersPart Nos. Shown in
LWASHER Ordering ChartPage 6-7
TEKNO6-2ASSEMBLY HARDWARE
Fastener Torque Recommendations
Application Fastener TypeRecommended
Torque (lbs.-ft.)
Corner Tab Bracket into Square Nut
5/16" - 18 Hex Head Cap Screw 16
Corner Tab Bracket into Square Nut
5/16" - 18 Button Head Cap Screw 16
End Plate into Support Beam
1/4" - 20 Flat Head Cap Screw 14
Heavy Duty Corner Tab Bracket into Square Nut
5/16" - 18 Flat Head Cap Screw 17
Square Nut into Support Beam T-slot 1/4" - 20 Socket Set Screw 8
Square Nut into Support Beam T-slot 5/16" - 18 Socket Set Screw 8
Web Brackets, etc. into 5/16" Lock Nut & Washer 5/16" - 18 T-Bolt 12
End of Support Beam 1/4" - 20 x 1 1/4" 6-Lobe Thread Cutting Screw 14
End of Support Beam 1/4" - 20 x 1" Socket Head Cap Screw 14
Web Bracket into Square Nut
5/16" - 18 Hex Head Cap Screw 16
TEKNO 6-3ASSEMBLY HARDWARE
T-BoltsTypical Use:• To secure mounting hardware to support beam T-slots.
Features:• Easy twist and locate installation from the side of the beam.• Indicator slot to identify proper orientation.• The T-Bolt is known to be fastened correctly when the indicator slot is perpendicular to the support beam T-slot.
Material:Low Carbon Steel, Zinc Plated.
0.75” [19.05mm]
0.23” [5.84mm]
5/16 - 18
L
0.42” [10.67mm]
20.22mm [0.80”]
5.34mm [0.21”]
27.34mm [1.08”]
M8 X 125 THD.
10.67mm [0.42”]
Part Number Description Length (L) Weight (lb/kg) List PriceH0100121 3/4" T-Bolt 0.98 in 0.03/0.01H0100221 7/8" T-Bolt 1.10 in 0.04/0.02H0100321 1" T-Bolt 1.23 in 0.04/0.02H0100421 1 1/4" T-Bolt 1.48 in 0.04/0.02H0100521 1 1/2" T-Bolt 1.73 in 0.05/0.02H0100621 M8-1.25 T-Bolt 27.34 mm 0.03/0.01
T-BOLT Ordering Chart:
TEKNO6-4ASSEMBLY HARDWARE
6-Lobe Flat Head Thread Cutting Cap Screw,Type F
Cup Point SocketSet Screws
SHSS Ordering Chart:
Pa rt Num be r De scription Ma te ria l W e ight (lb/kg) List Price25C125TTF 1/4" - 20 x 1 1/4" Steel, B lack Oxide 0.02/0.01
Part Num ber De scription Materia l W e ight (lb/kg) List Price25C31KKCS 1/4" - 20 x 5/16" 18-8 Stainless S teel 0.01/0.0131C31KKCS 5/16" - 18 x 5/16" 18-8 Stainless S teel 0.01/0.131C37KKCS 5/16" - 18 x 3/8" 18-8 Stainless Steel 0.01/0.0110F100KKCS 10 - 32 x 1" 18-8 Stainless Steel 0.02/0.01
Nylon Insert Hex Lock Nuts
Features:• Nylon Locking Insert.
HLNUT Ordering Chart:Part Number Description Material Weight (lb/kg) List Price
31CNTEZ 5/16" - 18 Thin Height Steel, Zinc Plated 0.01/0.01.80CNNE M8 - 1.25 Steel, Zinc Plated 0.01/0.01
Pa rt Num be r De scription Ma te ria l W e ight (lb/kg) List Price8N25TPC #8 X 1/4" Steel,Black Oxide 0.02/0.01
Self Tapping-Screw, For Snap On Guide Rail
TEKNO 6-5ASSEMBLY HARDWARE
Flange Nuts
Part Number Description Material Weight (lb/kg) List Price31CNNEFW 5/16" - 18 Steel, Zinc Plated 0.01/0.01
Flat Head Cap Screw
Part Number Description Material Weight (lb/kg) List Price50C88KFC 1/2"-13 x 7/8" Steel,Black Oxide 0.01/0.01
Flat Caster Washers* Typical Use: To create a rotation plate between a
caster and a Leveling Foot Support.
Features: Distributes load across the caster’s ballbearings.
FCWASHER Ordering ChartPart Number Description Material Weight
(lb/kg)
56N250WSDZ/125
9/16” X 2 ½” (for ½” stem
caster)
Zinc Plated
Steel
0.01/0.001
81N250WSDZ/125
13/16” X 2 ½” (for ¾” stem
caster)
Zinc Plated
Steel
0.01/0.001
TEKNO6-6ASSEMBLY HARDWARE
H0100721Double Square Nut -
5/16”-18 & 1/4”-20
Typical Uses:• To secure mounting hardware to supportbeam T-slots.• Used in place of a T-Bolt for increasedsurface contact with the T-slot profile toprovide high loading capacity.• Provides easy movement within the lengthof extrusion T-slots for easier positioning andadjustment of attachments.
Features:• Secured in T-slots with 1/4” - 20 or 5/16” -18 set screws and attached to hardware with1/4” - 20 or 5/16” - 18 screws.
Weight:0.05 lb [0.02 kg]
Hardware Recommended for Assembly:• 1/4” - 20 Cup Point Socket Set Screw(25C31KKCS), 1 each.• 5/16” - 18 Cup Point Socket Set Screw(31C31KKCS), 1 each.
.
Thin Spring Strut NutsTypical Use:• To secure mounting hardware to support beam T-slots.
Features:• The design allows for the insertion of the nut into SupportBeam T-slots from the side of the extrusion.• The nut is held in place by the compressed spring untiltightened by a screw.
SPRING NUT Ordering Chart:Pa rt Num be r De scription Ma te ria l W e ight (lb/kg) List Price
/G1534 1/4" - 20" S teel, Zinc P lated 0.03/0.01/G1532 10 32 S teel, Zinc P lated 0.04/0.02
0.38” [9.52mm]
0.38” [9.52mm]
0.38” [9.52mm]
0.25”[6.35mm]
1.00”[25.40mm]
0.75”[19.05mm]
TEKNO 6-7ASSEMBLY HARDWARE
Pa rt Num be r De scription M a te ria l W e ight (lb/kg) List Price25C100P TFZ 1/4" - 20 x 1 Zinc P lated S teel 0.04/0.02
1/4-20 X 1 PAN TORX TYPE F ZINC PLATED
Part Number Description Material Weight (lb/kg) List Price25NWSAZ 1/4" Steel,Zinc Plated,Grade 8 0.01/0.01
68N34WSDZ/089 5/16" Steel,Zinc Plated,Grade 8 0.01/0.0137NWSAZ 3/8" Steel,Zinc Plated,Grade 8 0.01/0.0150NWSAZ 1/2" Steel,Zinc Plated,Grade 8 0.01/0.0175NWSAZ 3/4" Steel,Zinc Plated,Grade 8 0.01/0.01
Lock Washers
LWASHER Ordering Chart:
Part Number Description Material Weight (lb/kg)
25NLOCZ
¼”
Zinc Plated Steel Medium Carbon,
Heat Treated
0.01/0.001
31NLOCZ
5/16”
Zinc Plated Steel Medium Carbon,
Heat Treated
0.01/0.001
37NLOCZ
3/8”
Zinc Plated Steel Medium Carbon,
Heat Treated
0.01/0.001
TEKNO7-1BEAM END CAPS
Beam End Caps
Typical Uses:• To cover the exposed ends ofSupport Beams.• Presents a neat, finished lookwhen used to complete astructure.
Features:• Push-lock tabs secure the endcaps during assembly withoutthe use of special tools.• The end caps may be removedfrom beam ends without damage,so they can be used again.
Material:Black Nylon.
Hardware or Tools Requiredfor Assembly:• None.
Tri-Slot End CapH0400121Page 7-2
1 x 1 Slot End CapH0400221Page 7-2
1 x 3 Slot EndCapH0400421Page 7-3
3 x 3 Slot End CapH0400721Page 7-5
2 x 3 Slot End CapH0400621Page 7-4
Guide Rail Lead InH0900221Page 7-5
1 x 2 Slot End CapH0400321Page 7-3
2 x 2 Slot End CapH0400521Page 7-4
TEKNO 7-2BEAM END CAPS
H0400121Tri-Slot End Cap1.28 in x 1.00 in
[32.51 mm x 25.40 mm]
Weight:0.01 lb [0.01 kg]
.
H04002211 x 1 Slot End Cap
1.63 in [41.40 mm] Square
Weight:0.02 lb [0.01 kg]
.
1.28” [32.61mm]
1.00” [25.40mm]
0.75” [19.05mm]
0.50” [12.70mm]
0.25” [6.35mm]
0.75” [19.02mm]
0.25” [6.35mm]0.25” [6.35mm]
1.63” [41.28mm] 1.13” [28.58mm]
TEKNO
H04004211 x 3 Slot End Cap
1.63 in x 3.38 in[41.40 mm x 85.85 mm]
Weight:0.04 lb [0.02 kg]
.
0.25” [6.35mm]
1.13” [28.58mm]
0.75” [19.05mm]
2.88” [73.03mm]0.25” [6.35mm]
1.62” [41.10mm]
3.38” [85.73mm]
7-3BEAM END CAPS
H04003211 x 2 Slot End Cap
1.63 in x 2.50 in[41.40 mm x 63.50 mm]
Weight:0.03 lb [0.01 kg]
.
TEKNO 7-4BEAM END CAPS
H04006212 x 3 Slot End Cap
2.50 in x 3.38 in[63.50 mm x 85.85 mm]
Weight:0.05 lb [0.02 kg]
.
0.25” [6.35mm]
2.50” [63.50mm]
0.75” [19.02mm]
0.25” [6.35mm]2.88” [73.03mm]
3.37” [85.67mm]
2.00” [50.80mm]
H04006212 x 2 Slot End Cap
2.50 in [63.50 mm] Square
Weight:0.04 lb [0.03 kg]
.
TEKNO7-5BEAM END CAPS
0.25” [6.35mm]
3.37” [85.70mm]
0.75” [19.02mm] 0.25” [6.35mm]
2.88” [73.03mm]
H04007213 x 3 Slot End Cap
3.38 in [85.85 mm] Square
Weight:0.06 lb [0.03 kg]
.
H0900221Guide Rail Lead In
Weight:0.02 lb
.
Hardware Recommended forAssembly: Self-Tapping Screw forSnap-On Guiderail (pp 6-4)
TEKNONotes:
7-5 BEAM END CAPS
TEKNO7-6 BEAM END CAPS
Notes:
TEKNO 8-1ELECTRICAL COMPONENTS
Standard Aluminum Wireway Components
Wireway Junction Components 45° Wireway Junction Components
Plastic Wireway Junction Boxes
WirewayE0600121Page 8-2
Wireway CoverE0600221Page 8-3
Wireway DividerH0600121Page 8-4
Wireway End PlateH0500121Page 8-5
Wireway JunctionE0600321Page 8-6
Wireway Junction End PlateH0500221Page 8-7
45° Wireway Junction CoverE0600421Page 8-8
45° Wireway Junction End PlateH0500321Page 8-9
Plastic WirewayE0500121Page 8-10
3-Hole 45°Junction Box
V0201111Page 8-11
3-Hole 45°Junction Box
V0200611Page 8-14
1-Hole 45°Junction Box
V0200411Page 8-12
2-Hole 45°Junction Box
V0200511Page 8-13
6-Hole 45°Junction Box
V0200911Page 8-17
4-Hole 45°Junction Box
V0200711Page 8-15
5-Hole 45°Junction Box
V0200811Page 8-16
TEKNOE0600121
Wireway
Typical Use:• For the routing of air and electrical linesbetween termination points.
Features:• The standard Modu-Tek® T-slot configura-tion on each side of the extrusion allows theuse of standard mounting hardware to fastenthe wireway to all T-slotted structuralextrusions.• V-shaped indentation marks running alongthe length of three sides of the extrusionfacilitate the proper alignment of a knockoutpunch for the attachment of conduit fittings.• The standard 3 x 3 Slot End Cap(H0400721) fits the extrusion profile.• The open top with snap-in wireway coverallows easy access for wiring.
Material:6063-T6 Aluminum Alloy with a 201-R1 ClearAnodize Exterior Finish.
Cross Sectional Area (A):1.70 in2 [10.94 cm2]
Weight Per Foot:1.99 lbs [0.90 kg]
Standard Length:20 ft [6.1 m]
Maximum Length Available:20 ft [6.1 m]
Assembly Notes:• 5/16” - 18 x 3/8” Set Screws(31C37KKCS) are required to be used inplace of 5/16” - 18 x 5/16” Set Screws(31C31KKCS) when joining wireway sec-tions together with joiner strips.• The knockout holes require a special toolto create. Please give the length andlocation of junction knockouts when order-ing.
.
8-2ELECTRICAL COMPONENTS
COVER CAN PIVOT TO 10°FROM THE VERTICAL PLANE
Ø0.23” [Ø5.72mm](4 PLACES)
2.88” [73.03mm] 3.35” [85.19mm]
0.25” [6.35mm]
3.38” [85.73mm]
0.81” [20.62mm]
0.25” [6.35mm] 2.88” [73.03mm]
TEKNO 8-3ELECTRICAL COMPONENTS
E0600221Wireway Cover
Typical Use:• Provides a hinged cover for theModu-Tek® Wireway (E0600121).
Features:• Unique profile snaps onto the wirewayextrusion providing a hinged cover along theentire length of the wireway without the use offasteners.• The wireway extrusion is symmetrical,allowing the piece to be attached as either aright hand or left hand cover.• Profile design allows the cover to hingeopen 10° beyond the vertical position toprovide easy access for wiring.• Easy lift-off profile allows the cover to beremoved.
Material:6063-T6 Aluminum Alloy with a 201-R1 ClearAnodize Exterior Finish.
Cross Sectional Area (A):0.37 in2 [2.39 cm2]
Weight Per Foot:0.44 lb [0.20 kg]
Standard Length:20 ft [6.1 m]
Maximum Length Available:20 ft [6.1 m]
Hardware Required for Attachment toWireway:• None.
.
2.88” [73.03mm]
COVER CAN PIVOT TO 10°FROM THE VERTICAL PLANE
ON WIREWAY’S CYLINDRICAL PROFILE
WIREWAYEXTRUSION
TEKNO8-4ELECTRICAL COMPONENTS
H0600121Wireway Divider
Typical Use:• The steel wall divides Wireway (E0600121)into two equal-sized, parallel chambers.
Features:• Allows separation of electrical wiring andpneumatic air lines.• Can be used to separate wiring to avoidelectrical noise interference that can occurwhen these wires run together for longdistances.
Material:Mild Steel
Weight Per Foot:0.62 lb [0.28 kg]
Hardware Recommended for Assembly toCenter of Wireway Extrusion Trough:• 1” Double-sided Industrial Foam Tape(VHB4941), cut to length of Wireway Divider.
.0.38” [9.52mm]
2.88” [73.03mm]
0.75” [19.05mm]
TEKNO 8-5ELECTRICAL COMPONENTS
H0500121Wireway End Plate
Typical Use:• The aluminum plate covers the exposedend of the Modu-Tek® Wireway (E0600121).
Features:• The structural integrity and material compo-sition of the part allows for the tapping of ahole in the center to accept standard conduitfittings.• Although the wireway extrusion end canalso accommodate the 3 x 3 Slot Plastic EndCap (H0400721), the aluminum Wireway EndPlate is the best choice for the secureattachment of conduit fittings.
Material:6063-T6 Aluminum Alloy with a Clear AnodizeFinish.
Weight:0.14 lb [0.06 kg]
Hardware Recommended for Assembly toWireway:• 1/4” - 20 x 1 Pan Torx Screw Type F Plated(25C100PTFZ), 4 each.
.3.38” [85.73mm]
2.88” [73.03mm] 0.25” [6.35mm]
Ø0.28” [Ø7.11m](4 PLACES)
0.13” [3.18mm]
3.38” [85.73mm]
TEKNO8-6ELECTRICAL COMPONENTS
E0600321Wireway Junction
Typical Use:• Provides a 90° junction at the end of awireway section for the routing of air andelectrical lines between termination points.
Features:• The symmetrical design of the junctionprovides an open-style extrusion to facilitatethe addition of conduit fitting knockout holesfrom the inside of the extrusion.• Two pieces of the extrusion can be matedtogether and firmly secured between twoWireway Junction End Plates to form a fullyenclosed junction box.• Since the Wireway Junction is an extru-sion, various lengths can be accommodatedto create simple 90° or 45° elbow, “T” configu-rations, or junction boxes with terminationsfrom wireway to field devices.
Material:6063-T6 Aluminum Alloy with a 201-R1 ClearAnodize Exterior Finish.
Cross Sectional Area (A):1.32 in2 [8.52 cm2]
Weight Per Foot:1.55 lbs [0.70 kg]
Standard Length:20 ft [6.1 m]
Maximum Length Available:20 ft [6.1 m]
Assembly Notes:• The junction extrusion halves slide togetherend-to-end.• The knockout holes require a special tool tocreate. Please give the length and location ofjunction knockouts when ordering.
.
4.67” [118.46mm]
4.67” [118.46mm]
4.00” [101.60mm]
4.00” [101.60mm]
TEKNO 8-7ELECTRICAL COMPONENTS
H0500221Wireway Junction End Plate
Typical Use:• This aluminum plate covers the exposedends of two identical mated Modu-Tek®Wireway Junction halves (E0500121).
Features:• The structural integrity and material compo-sition of the part allows for the tapping of ahole in the center to accept standard conduitfittings.
Material:6061 Aluminum Alloy with a Clear AnodizeExterior Finish.
Weight:0.26 lb [0.12 kg]
Hardware Recommended for Assembly toMated Wireway Junction Extrusions:• 1/4” - 20 x 1 Pan Torx ScrewType F Plated(25C100PTFZ), 4 each.
. 4.00” [101.60mm]
4.67” [118.49mm]
Ø0.28” [Ø7.14mm](3 PLACES)
0.13” [3.18mm]
4.67” [118.49mm]
TEKNO8-8ELECTRICAL COMPONENTS
E060042145° Wireway Junction Cover
Typical Use:• Accommodates 45° wireway runs from theWireway Junction (E0600321).
Features:• An indentation mark running the length ofthe inside of the extrusion facilitates theproper alignment of a knockout punch for theattachment of conduit fittings.• The Wireway Junction and cover can bemated and secured firmly in place with themounting of a 45° Wireway Junction EndPlate (EEPPD0600V003) on each end.
Material:6063-T6 Aluminum Alloy with a 201-R1 ClearAnodize Exterior Finish.
Cross Sectional Area (A):1.02 in2 [6.58 cm2]
Weight Per Foot:1.20 lbs [0.54 kg]
Standard Length:20 ft [6.1 m]
Maximum Length Available:20 ft [6.1 m]
Assembly Notes:• The Wireway Junction Cover must slidefrom the end of the Wireway Junction to matethe two parts.• The knockout holes require a special tool tocreate. Please give the length and location ofjunction knockouts when ordering.
.
5.66” [143.69mm]45°
1.11” [28.09mm]
1.79” [45.52mm]
4.67” [118.49mm]
1.79” [45.52mm]
TEKNO 8-9ELECTRICAL COMPONENTS
H050032145° Wireway Junction
End Plate
Typical Use:• This aluminum plate covers the exposedends of the mated Modu-Tek® WirewayJunction (E0500121) and 45° WirewayJunction Cover (E060221).
Features:• The structural integrity and material compo-sition of the part allows for the tapping of ahole in the center to accept standard conduitfittings.
Material:6061 Aluminum Alloy with a Clear AnodizeExterior Finish.
Weight:0.21 lb [0.10 kg]
Hardware Recommended for Assembly toMated Wireway Junction and 45° Wire-way Junction Cover Extrusions:• 1/4” - 20 x 1 Pan Torx ScrewType F Plated(25C100PTFZ), 3 each.
.
4.67” [118.49mm]
4.00” [101.60mm] 0.13” [3.18mm]
Ø0.28” [Ø7.14mm](3 PLACES)
45°
TEKNO8-10ELECTRICAL COMPONENTS
E0500121Plastic Wireway1.00 in x 1.50 in
[25.40 mm x 38.10 mm]
Typical Use:• To neatly contain pneumatic tubes andelectrical cables along the length of supportstructure extrusion T-slots.
Features:• Flexible snap-in profile fits support structureextrusion T-slots.• The flexible hinge and snap-on lid allowseasy access to the wireway.• Witness lines along the full length of theextrusion allow for accurate positioning ofholes for the entry and exit of cables throughthe sides of the wireway.
Material:Black Dual Durometer Polyvinyl Chloride.
Weight Per Foot:0.14 lb [0.06 kg]
Hardware or Tools Recommended forAssembly:• None.
.1.50” [38.10mm]
1.00” [25.40mm]0.06” [1.60mm]
CLOSED VIEW
OPEN VIEW PLASTIC WIREWAY ASSEMBLEDTO 1 X 1 SUPPORT BEAM
TEKNO 8-11ELECTRICAL COMPONENTS
V02011113-Hole Junction Box
Typical Use:• An enclosure for the mounting and wiring oftwo electrical components.
Features:• Allows two electrical components to bemounted at a 45° angle.• Mounts to a Wireway extrusion (E0600121)when wireway knockouts are specified.• Can also be mounted to a conduit.
Materials:• Junction Box Extrusions: 6063-T6 Alumi-num Alloy with a Clear Anodize Finish.• End Plates: 6061 Aluminum Alloy with aClear Anodize Finish.• Button Head Cap Screws: 18-8 StainlessSteel.
Weight:1.25 lbs [0.57 kg]
Hardware Included:• 1-Hole 45° Wireway Junction Cover(E0600421), 1 each.• Wireway Junction(E0600321), 1 each.• 45° Wireway Junction End Plates(H0500321), 2 each.• 1/4” - 20 x 1 Pan Torx ScrewType F Plated(25C100PTFZ), 8 each.
Hardware Recommended for Assembly:• None.
.
TEKNO8-12ELECTRICAL COMPONENTS
V02004111-Hole 45° Junction Box
Typical Use:• An enclosure for the mounting and wiring oftwo electrical components.
Features:• Allows two electrical components to bemounted at a 45° angle.• Mounts to a Wireway extrusion (E0600121)when wireway knockouts are specified.• Can also be mounted to a conduit.
Materials:• Junction Box Extrusions: 6063-T6 AluminumAlloy with a Clear Anodize Finish.• End Plates: 6061 Aluminum Alloy with aClear Anodize Finish.• Button Head Cap Screws: 18-8 StainlessSteel.
Weight:1.25 lbs [0.57 kg]
Hardware Included:• 1-Hole 45° Wireway Junction Cover(E0600421), 1 each.• Wireway Junction(E0600321), 1 each.• 45° Wireway Junction End Plates(H0500321), 2 each.• 1/4” - 20 x 1 Pan Torx ScrewType F Plated(25C100PTFZ), 8 each.Hardware Recommended for Assembly:• None.
.
TEKNO 8-13ELECTRICAL COMPONENTS
V02005112-Hole 45° Junction Box
Typical Use:• An enclosure for the mounting and wiring oftwo electrical components.
Features:• Allows two electrical components to bemounted at a 45° angle.• Mounts to a Wireway extrusion (E0600121)when wireway knockouts are specified.• Can also be mounted to a conduit.
Materials:• Junction Box Extrusions: 6063-T6 AluminumAlloy with a Clear Anodize Finish.• End Plates: 6061 Aluminum Alloy with aClear Anodize Finish.• Button Head Cap Screws: 18-8 StainlessSteel.
Weight:1.80 lbs [0.82 kg]
Hardware Included:• 2-Hole 45° Wireway Junction Cover(E0600421), 1 each.• Wireway Junction(E0600321), 1 each.• 45° Wireway Junction End Plates(H0500321), 2 each.• 1/4” - 20 x 1 Pan Torx ScrewType F Plated(25C100PTFZ), 8 each.Hardware Recommended for Assembly:• None.
.
TEKNO8-14ELECTRICAL COMPONENTS
V02006113-Hole 45° Junction Box
Typical Use:• An enclosure for the mounting and wiring ofthree electrical components.
Features:• Allows three electrical components to bemounted at a 45° angle.• Mounts to a Wireway extrusion (E0600121)when wireway knockouts are specified.• Can also be mounted to a conduit.
Materials:• Junction Box Extrusions: 6063-T6AluminumAlloy with a Clear Anodize Finish.• End Plates: 6061 Aluminum Alloy with aClear Anodize Finish.• Button Head Cap Screws: 18-8 StainlessSteel.
Weight:2.40 lbs [1.09 kgs]
Hardware Included:• 3-Hole 45° Wireway Junction Cover(E0600421), 1 each.• Wireway Junction(E0600321), 1 each.• 45° Wireway Junction End Plates(H0500321), 2 each.• 1/4” - 20 x 1 Pan Torx ScrewType F Plated(25C100PTFZ), 8 each.
Hardware Recommended for Assembly:• None.
.
TEKNO 8-15ELECTRICAL COMPONENTS
V02007114-Hole 45° Junction Box
Typical Use:• An enclosure for the mounting and wiring ofthree electrical components.
Features:• Allows three electrical components to bemounted at a 45° angle.• Mounts to a Wireway extrusion (E0600121)when wireway knockouts are specified.• Can also be mounted to a conduit.
Materials:• Junction Box Extrusions: 6063-T6AluminumAlloy with a Clear Anodize Finish.• End Plates: 6061 Aluminum Alloy with aClear Anodize Finish.• Button Head Cap Screws: 18-8 StainlessSteel.
Weight:3.00 lbs [1.36 kgs]
Hardware Included:• 4-Hole 45° Wireway Junction Cover(E0600421), 1 each.• Wireway Junction (E0600321), 1 each.• 45° Wireway Junction End Plates(H0500321), 2 each.• 1/4” - 20 x 1 Pan Torx ScrewType F Plated(25C100PTFZ), 8 each.
Hardware Recommended for Assembly:• None.
.
TEKNO8-16ELECTRICAL COMPONENTS
V02008115-Hole 45° Junction Box
Typical Use:• An enclosure for the mounting and wiring ofthree electrical components.
Features:• Allows three electrical components to bemounted at a 45° angle.• Mounts to a Wireway extrusion (E0600121)when wireway knockouts are specified.• Can also be mounted to a conduit.
Materials:• Junction Box Extrusions: 6063-T6AluminumAlloy with a Clear Anodize Finish.• End Plates: 6061 Aluminum Alloy with aClear Anodize Finish.• Button Head Cap Screws: 18-8 StainlessSteel.
Weight:3.60 lbs [1.63 kgs]
Hardware Included:• 5-Hole 45° Wireway Junction Cover(E0600421), 1 each.• Wireway Junction (E0600321), 1 each.• 45° Wireway Junction End Plates(H0500321), 2 each.• 1/4” - 20 x 1 Pan Torx ScrewType F Plated(25C100PTFZ), 8 each.
Hardware Recommended for Assembly:• None.
.
TEKNO 8-17ELECTRICAL COMPONENTS
V02009116-Hole 45° Junction Box
Typical Use:• An enclosure for the mounting and wiring ofthree electrical components.
Features:• Allows three electrical components to bemounted at a 45° angle.• Mounts to a Wireway extrusion (E0600121)when wireway knockouts are specified.• Can also be mounted to a conduit.Materials:• Junction Box Extrusions: 6063-T6AluminumAlloy with a Clear Anodize Finish.• End Plates: 6061 Aluminum Alloy with aClear Anodize Finish.• Button Head Cap Screws: 18-8 StainlessSteel.
Weight:4.00 lbs [1.81 kgs]
Hardware Included:• 6-Hole 45° Wireway Junction Cover(E0600421), 1 each.• Wireway Junction (E0600321), 1 each.• 45° Wireway Junction End Plates(H0500321), 2 each.• 1/4” - 20 x 1 Pan Torx ScrewType F Plated(25C100PTFZ), 8 each.
Hardware Recommended for Assembly:• None.
.
TEKNO
Stair Tread and WalkoversTekno’s Modu-Tek line also allows you to design and buildcompletely modular stair treads and walkovers for yourapplication. Built of the highest quality extruded anodizedaluminum, these structures provide lightweight, yet ultrasturdy platforms and staircases. Our tread plate materialis designed with a premium on safety; all of our treadplates feature raised rows of “teeth” for extra traction. Wealso offer vented tread plate that allows dirt and otheraccumulates to fall freely through the plate, virtuallyeliminating the risk of slippage. As is the case with anyModu-Tek product, these structures posess incredibleversatility and are easily configured/reconfigured for anyapplication; no drilling or tapping required! Call us today forfurther information on our Modu-Tek Walkovers and StairTreads!This Page
Intentionally LeftBlank
TEKNO 9-1ACCESSORIES
T-Slot Covers
T- Slot Cover, SafetyYellow
E0500221Page 9-4
T-Slot Cover, BlackE0500321Page 9-4
Panels
Clear Polycarbon-ate
PanelH0700121Page 9-8
1” x 1” BlackPlastic-
Coated 12 GuageWire
Mesh PanelH0700421Page 9-9
Panel Retainers
Panel Retainerfor MeshPanels
H0700521Page 9-10
Corne
Panel Clamp
Panel Clamp T-SlotInsert
E0500521Page 9-5
2-Panel Door Slide T-SlotInserts
2 - Panel DoorSlide, TopE0500721Page 9-6
2 - Panel DoorSlide, Bottom
E0500721Page 9-7
Expanded MetalMesh PanelH0700221Page 9-8
1/2” x 1/2” BlackPlastic-
Coated 16 GuageWire
Mesh PanelH0700321Page 9-9
Panel Retainer forPlasticPanels
H0700621Page 9-11
Flat PanelRetainer Strip
E0501021Page 9-14
DoublePanel
RetainerStrip
E0500921Page 9-13
Panel Retainer Strips
PanelRetainer
StripE0500821Page 9-12
TEKNO
Plastic Door Handlefor Extrusion T-Slots
H0800221Page 9-18
Magnetic Catch Assemblies
Lift-Off Door Hinge,Left HandH0800521Page 9-21
Lift-Off Door Hinge,Right HandH0800811Page 9-22
Plastic Door Handles
Plastic Door Handlefor PanelsH0800711Page 9-17
Adjustable Door HingeH0800621Page 9-20
Door HingeH0800521Page 9-19
Nylon Door Hinges
Metal Handle Assemblies
Magnetic CatchAssembly, for Tri-Slot
Support BeamH0801011Page 9-26
Metal Handle Assembly,Non-Locking
H0800411Page 9-23
Metal HandleAssembly,Locking
H0800311Page 9-24
Magnetic CatchAssembly,H0800911Page 9-25
9-2ACCESSORIES
Corner Finishing Cap
Corner Finishing CapH0400821Page 9-15
Guide Wheel
Guide WheelH0801121Page 9-16
TEKNO
Corner ExtrusionE0502021Page 9-27
1x1 End BracketB0700521Page 9-28
Corner Extrusion
1x1 End Brackets
Tool Trolley
Tool Trolley AssemblyH1300311Page 9-29
Covered Roller
Covered RollerH0301921Page 9-27
1x1End Bracket SwivelB0700511Page 9-28
Cam RollerH1300211Page 9-29
9-3ACCESSORIES
TEKNO9-4ACCESSORIES
E0500221T-Slot Cover, Safety Yellow
E0500321T-Slot Cover, Black
Typical Use:• To cover T-slots.• To hold cables and piping in position.
Features:• Flexible snap-in profile.• No hardware or special tools required toinsert into beam extrusions.
Material:Rigid Polyvinyl Chloride Extrusion
Weight Per Foot:0.02 lb [0.01 kg]
Standard Length Available:16.0 ft [4.9 m]
Maximum Length Available:16.0 ft [4.9 m]
Hardware or Tools RequiredFor Assembly:• None: installs by pressing into a standardT-slot of any Modu-Tek® extrusion.
.
0.19” [4.70mm]
0.47” [11.99mm]INSTALLEDIN T-SLOT
TEKNO 9-5ACCESSORIES
E0500521Panel Clamp T-Slot Insert
Typical Use:• To secure 7/32” stationary polycarbonatepanels in place within extrusion T-Slots forguarding and enclosures.
Features:• Flexible profile accepts various widths ofpolycarbonate sheeting.• No hardware required for assembly.
Material:Black Rigid Polyvinyl Chloride Extrusion
Weight Per Foot:0.04 lb [0.02 kg]
Standard Length Available:16.0 ft [4.9 m]
Maximum Length Available:16.0 ft [4.9 m]
Hardware or Tools RequiredFor Assembly:• None.
Assembly Note:• Panels must be inserted before thecompletionof a closed assembly frame. The PanelT-Slot Clamp installs onto the polycarbonatesheet by pressing the open cavity of the PVCextrusion onto the edge of the panel, whilethe mated polycarbonate panel and clampinstalls by pressing into the T-Slot of asupport beam extrusion. A rubber mallet canbe used to tap the extrusion onto the edge ofthe polycarbonate panel.
.
TEKNO9-6ACCESSORIES
E05006212-Panel Door Slide, Top
Typical Use:• Holds the tops of two sliding panels inplace between two parallel beams.
Features:• Flexible snap-in profile.• No hardware or special tools required toinsert into beam extrusions.• Panels can be inserted after frameassembly.
Material:Black Rigid Polyvinyl Chloride Extrusion
Weight Per Foot:0.21 lb [0.09 kg]
Standard Length Available:16.0 ft [4.9 m]
Maximum Length Available:16.0 ft [4.9 m]
Hardware or Tools RequiredFor Assembly:• None.
Assembly Note:• Installs by pressing into T-slot. The slidingpanel height appropriate for a given spacebetween two parallel beams can be derived bysubtracting 0.81 in [20.57 mm] from thedistance between the bottom edge surface ofthe top beam and the top edge of the lowerbeam.
.
TEKNO 9-7ACCESSORIES
E05007212-Panel Door Slide, Bottom
Typical Use:• Holds the bottoms of two sliding panels inplace between two parallel beams.Features:• Flexible snap-in profile.• No hardware or special tools required toinsert into beam extrusions.• Panels can be inserted after frameassembly.
Material:Black Rigid Polyvinyl Chloride Extrusion
Weight Per Foot:0.17 lb [0.08 kg]
Standard Length Available:16.0 ft [4.9 m]
Maximum Length Available:16.0 ft [4.9 m]
Hardware or Tools RequiredFor Assembly:• None.
Assembly Note:• Installs by pressing into T-slot. Thesliding panel height appropriate for a givenspace between two parallel beams can bederived by subtracting 0.81 in [20.57 mm]from the distance between the bottom edgesurface of the top beam and the top edge ofthe lower beam.
.
TEKNO9-8ACCESSORIES
H0700221Expanded Metal Mesh Panel
Typical Use:• For guarding enclosure applications with allModu-Tek® extrusions.
Features:• 1.680 in x 0.563 in [42.672 mm x 14.300mm] openings.
Material:0.75 in [19.05 mm] #9 Flattened 0.13 in [3.30mm] Thick Powder Coated Yellow CarbonSteel
Weight Per Square Foot:1.75 lbs [0.79 kg]
Standard / Maximum Size:4.0 ft x 8.0 ft [1.2 m x 2.4 m] sheet
.
H0700121Clear Polycarbonate Panel
Typical Use:• For guarding enclosure applications with allModu-Tek® extrusions.
Features:• High Impact strength and durablilty, 0.22in [5.59mm] thick.
Weight Per Square Foot:1.50 lb [0.7 kg]
Standard / Maximum Size:4.0 ft x 8.0 ft [1.2 m x 2.4 m] sheet
Custom Sizes:Cut sizes smaller than standard are available.
.
TEKNO 9-9ACCESSORIES
H07004211” x 1” Black Plastic-Coated 12
Guage Wire Mesh Panel
Typical Use:• For guarding enclosure applications with allModu-Tek® extrusions.
Features:• 1.00” [25.40mm] Square openings.
Weight Per Square Foot:1.00 lb [0.45 kg]
Standard / Maximum Size:4.0 ft x 8.0 ft [1.2 m x 2.4 m] sheet
Custom Sizes:Cut sizes smaller than standard are available.
.
H07003211/2” x 1/2” Black Plastic-Coated 16
Guage Wire Mesh Panel
Typical Use:• For guarding enclosure applications with allModu-Tek® extrusions.
Features:• 0.50” [12.70mm] Square openings.
Weight Per Square Foot:0.50 lb [0.23 kg]
Standard / Maximum Size:4.0 ft x 8.0 ft [1.2 m x 2.4 m] sheet
Custom Sizes:Cut sizes smaller than standard areavailable.
.
TEKNO9-10ACCESSORIES
H0700521Panel Retainer for
Mesh Panel
Typical Use:• To attach expanded metal panel to supportbeam extrusions in guarding enclosures.
Features:• Attaches to all support beams with stan-dard fastener hardware.• The retainer allows the expanded metal tobe seated into the T-slot, providing a com-pletely enclosed guard.
Material:1/8” Thick Mild Seel, Zinc Plated.
Weight:0.28 lb [0.13 kg]
Hardware or Tools RequiredFor Assembly:
To Support Beam:• 5/16” - 18 x 3/4” T-Bolts (H0100121), 2each.• 5/16” Flat Washers (68N34WSDZ/089), 2each.• 5/16” Nylon Insert Thin Height Lock Nuts(31CNTEZ), 2 each.
To Mesh Panel:• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 2 each.• 5/16” Lock Washers (31NLOCZ), 2 each.• 2-Hole Strap Nut (B0600121), 1 each.
Assembly Note:• This panel retainer is not compatible withthe Tri-Slot Support Beam (E0100101).
.
0.84”[21.34mm]
Ø0.34”[Ø8.64mm]
0.63”[15.95mm]
1.75”[44.45mm]
2.50” [63.50mm]0.59”
[14.99mm]
1.44”[36.58mm]
3.34”[84.94mm]
TEKNO 9-11ACCESSORIES
H0700721Panel Retainer for
Plastic Panel
Typical Use:• To attach polycarbonate sheeting tosupport beam extrusions in guardingenclosures.
Features:• Attaches to all support beams withstandardfastener hardware.• The retainer allows a polycarbonate sheettobe firmly seated and secured into the Tslot,providing a completely enclosed guard.
Material:1/8” Thick Mild Steel, Zinc Plated.
Weight:0.14 lb [0.07 kg]
Hardware or Tools RequiredFor Assembly:
To Support Beam:• 5/16” - 18 x 3/4” T-bolt (H0100121), 1 each.• 5/16” Flat Washer (68N34WSDZ/089), 1each.• 5/16” Nylon Insert Thin Height Lock Nut(31CNTEZ), 1 each.
To Polycarbonate Panel:• 5/16” - 18 x 3/4” Hex Head Cap Screw(31C75HCS5Z), 1 each.• 5/16” Flat Washer (68N34WSDZ/089), 1each.• 5/16” Nylon Insert Thin Height Lock Nut(31CNTEZ), 1 each.
Assembly Note:• This panel retainer is not compatible withthe Tri-Slot Support Beam (E0100101).
.
TEKNO9-12ACCESSORIES
E0500821Panel Retainer Strip
Typical Use:• To secure 7/32” [5.56 mm] polycarbonatepaneling to T-slotted frame structures inguarding applications.
Features:• Flexible snap-in profile.• No hardware or special tools required toinsert into beam extrusions.
Material:Black Rigid Polyvinyl Chloride Extrusion
Weight Per Foot:0.06 lb [0.03 kg]
Maximum Length Available:16.0 ft [4.9 m]
Hardware or Tools Required
For Assembly:• A special installation tool is recommendedand available upon request.
.
TEKNO 9-13ACCESSORIES
E0500921Double Panel Retainer Strip
Typical Use:• To secure 7/32” [5.56 mm] polycarbonatepaneling to T-slotted frame structures inguarding applications. Secures paneling toboth sides of the T-slot.
Features:• Flexible snap-in profile.• No hardware or special tools required toinsert into beam extrusions.• Reduces the amount of T-slotted beamrequired to complete a structure.
Material:Black Rigid Polyvinyl Chloride Extrusion
Weight Per Foot:0.10 lb [0.04 kg]
Maximum Length Available:16.0 ft [4.9 m]
Hardware or Tools Required
For Assembly:• A special installation tool is recommendedand available upon request.
.
TEKNO9-14ACCESSORIES
E0501021Flat Panel Retainer Strip
Typical Use:• To secure 7/32” [5.56 mm] polycarbonatepaneling to the flat-surfaced framingstructures,such as tubing, in guarding applications.
Features:• Flexible profile.
Material:Black Rigid Polyvinyl Chloride Extrusion
Weight Per Foot:0.06 lb [0.02 kg]
Maximum Length Available:16.0 ft [4.9 m]
Hardware Recommended
For Assembly:• 1/4” - 20 x 3/8” Socket Head Cap Screws(25C37KCSS), quantity as needed per job.
.
TEKNO 9-15ACCESSORIES
H0400821Corner Finishing Cap
Typical Use:• To provide a finished look to individual 90°corners where Panel Retainer Strip,E0500821, is used.
Features:• The Cap covers the exposed ends of thePanel Retainer Strips, thereby, preventingthem from being pulled away from the beamslot.
Material:Black Nylon.
Weight:0.03 lb. [0.01 kg.]
Hardware Recommended
For Assembly:• 1/4” - 20 x 7/8” Button Head Cap Screw(25C87KBC), 1 each.• Double Square Nut (H0100721), 1 each.
.
TEKNO9-16ACCESSORIES
H0801121Guide Wheel
Typical Use:• As rollers to create panels that slide alongthe standard Modu-Tek® T-slotted extrusion.
Material:Polyamide
Weight:0.26 lb. [0.12 kg.]
Hardware Recommended
For Assembly:• 5/16” x 5/8” Shoulder Bolt (31N62KSS), 1each.• 5/16” Flat Washer (68N34WSDZ/089), 1each.• Double Square Nut (H0100721), 1 each.
.
TEKNO 9-17ACCESSORIES
H0800121Plastic Door Handle
for Panels
Typical Use:• To be mounted as a handle to slidingpanels, doors, and access hatches.
Features:• Lightweight and sturdy.• 1/4” - 20 inserts accept standard screws forattachment to surfaces.
Material:Polypropylene-Copolymer
Weight:0.08 lb [0.03 kg]
Hardware Recommended
For Assembly:• 1/4” - 20 x 1/2” Flat Head Cap Screws(25C50KFCS), 2 each.Assembly Note:• Panel holes must be drilled andcountersunkto use handle with Flat Head CapScrews.
.
TEKNOH0800221
Plastic Door Handlefor Extrusion T-Slots
Typical Use:• To be mounted as a handle to extrusion T-slots.
Features:• Lightweight and sturdy.• 1/4” - 20 inserts accept standard screwsfor attachment to extrusions.
Material:Thermoplastic, Glass Fiber Reinforced
Weight:0.09 lb [0.04 kg]
Hardware RecommendedFor Assembly:• 1/4” - 20 x 5/8” Socket Head Cap Screws(25C62KCSS), 2 each.• Double Square Nuts (H0100721), 2 each.• 5/16” - 18 x 5/16” Socket Set Screws withCup Points (31C31KKCS), 2 each.
Required in lieu of above listed 5/8” SocketHead Cap Screws (25C62KCSS) whenmounting to the Tri-Slot Support Beam(H0800221):• 1/4” - 20 x 1/2” Socket Head Cap Screws(25C50KCSS), 4 each.
.
1.02” [25.91mm]
Ø0.25” [Ø6.35mm] THROUGH,Ø0.41” [Ø10.41mm] X 0.35” [8.89mm] DEEP
1.61” [40.89mm]
0.24” [6.10mm]
1.34” [34.04mm]
3.75” [95.30mm]
4.61” [117.14mm]
5.47” [138.99mm]
9-18ACCESSORIES
TEKNO 9-19ACCESSORIES
H0800521Door Hinge
Typical Use:• Hinge for doors and swing-out or pivotingstructures.
Features:• Mounts directly to extrusion T-slots.
Material:Leaves: Reinforced Polyamide.Hinge Pin: AISI 304 Stainless Steel
Weight:0.26 lb [0.12 kg]
Hardware Recommended
For Assembly:• 1/4” - 20 x 1/2” Socket Head Cap Screws(25C50KCSS), 4 each.• Double Square Nuts (H0100721), 4 each.• 5/16” - 18 x 5/16” Socket Set Screws(31C31KKCS), 4 each.
Assembly Note:• This door hinge provides a wider gapbetween extrusions than the lift off hinges(H0800711 and H0800811).
.
TEKNO9-20ACCESSORIES
H0800621Adjustable Door Hinge
Typical Use:• Hinge for doors, panels, and swing-out orpivoting structures.
Features:• Mounts directly to extrusion T-slots.• Provides either free or dampened doorswing motion.• Assists in holding door open, closed, orpartially open.
Materials:• Leaves: Black Acetal.• Hinge Pin: Clear Polycarbonate.• Adjusting Screw and Nut: 303 StainlessSteel.
Weight:0.10 lb [0.05 kg]
Hardware Recommended
For Assembly:
For attachment to T-Slot:• 1/4” - 20 Thin Spring Strut Nuts (/G1534), 2each.• 1/4 - 20 x 1/2” Socket Head Cap Screws(25C50KCSS), 2 each.
For attachment to polycarbonate sheet(H0700121) with drilled and tapped holes:• 1/4” - 20 x 1/2” Socket Head Cap Screws(25C50KCSS), 2 each.
For attachment to Tri-Slot Support Beam:• 1/4” - 20 x 3/8” Socket Head Cap Screws(25C37KCSS), 2 each.
Assembly Note:• For attachment of this hinge to Tri-SlotSupport Beams (H0800221), drill and tap two1/4” - 20 x 1/4” deep holes into center of solidside of extrusion on 1.88” [47.75mm]centers.
.
TEKNO 9-21ACCESSORIES
H0800711Lift-off Door Hinge, Left Hand
Typical Use:• Hinge for doors and swing-out or pivotingstructures.
Features:• Attached door can be lifted off of its hinge.
Material:Glass-filled Nylon
Weight:0.38 lb [0.17 kg]
Hardware RecommendedFor Assembly:• 3/4” T-Bolts (H0100121), 4 each.• 5/16” Nylon Insert Thin Height Lock Nuts(31CNTEZ), 4 each.• 5/16” Flat Washers (68N34WSDZ/089), 4each.
. 3.00” [76.20mm]
0.88” [22.23mm]
1.22” [30.96mm]1.28” [32.56mm]
0.81” [20.62mm]
0.88” [22.23mm]
2.50” [63.50mm]
5.00” [127.00mm]
0.81” [20.62mm]
Ø0.34” [Ø8.64mm]
0.88” [22.23mm]1.50” [38.10mm]
TEKNO9-22ACCESSORIES
1.28” [32.56mm]
0.88” [22.23mm]
1.22” [30.96mm]
3.00” [76.20mm]
0.88” [22.23mm]
0.81” [20.62mm]
0.88” [22.23mm]
0.81” [20.62mm]
2.50” [63.50mm]
1.50” [38.10mm]Ø0.34” [Ø8.64mm]
5.00” [127.00mm]
H0800811Lift-off Door Hinge, Right Hand
Typical Use:• Hinge for doors and swing-out or pivotingstructures.
Features:• Attached door can be lifted off of its hinge.
Material:Glass-filled Nylon
Weight:0.38 lb [0.17 kg]
Hardware RecommendedFor Assembly:• 3/4” T-Bolts (H0100121), 4 each.• 5/16” Nylon Insert Thin Height Lock Nuts(31CNTEZ), 4 each.• 5/16” Flat Washers (68N34WSDZ/089), 4each.
.
TEKNO 9-23ACCESSORIES
H0800411Handle Assembly,
Non-locking
Typical Use:• To latch doors on cabinets and guarding.
Features:• Corrosion-resistant chrome finish.• 360° turn for right hand or left hand use.
Material:Bright Chrome, Zinc Die Cast.
Weight:0.63 lb [0.28 kg]
Hardware Included with Assembly:• Handle (H0800411), 1 each.• 10 - 32 Spring Nuts (/G1532), 2 each.• 10 - 32 x 1/2” Flat Head Cap Screws(10F50KFCS), 2 each.• Nylon Washer (90295A185), 1 each.• Cam (H0800411), 1 each.
Hardware Recommended for Assembly:• None.
.
TEKNO
H0800311Handle Assembly, Locking
Typical Use:• To latch and lock doors on cabinets andguarding.
Features:• Corrosion-resistant chrome finish.• 360° turn for right hand or left hand use.• Keyed lock for security.
Material:Bright Chrome, Zinc Die Cast.
Weight:0.63 lb [0.28 kg]
Hardware Included with Assembly:• Handle (H0800411), 1 each.• 10 - 32 Spring Nuts (/G1532), 2 each.• 10 - 32 x 1/2” Flat Head Cap Screws(10F50KFCS), 2 each.• Nylon Washer (90295A185), 1 each.• Cam (H0800411), 1 each.• Two working keys.
Hardware Recommended for Assembly:• None.
.
9-24ACCESSORIES
TEKNO 9-25ACCESSORIES
H0800911Magnetic Catch Assembly
Typical Use:• To latch panels in place.
Features:• Compact and rugged.• Self-aligning magnets assure full contactand maximum holding power.• Ten pounds of pull required to break contactbetween surfaces.
Material:• Body: Plastic.• Magnetic Poles & Striker Plate: Steel.
Weight:0.08 lb [0.04 kg]
Hardware Included with Assembly:• Magnet and Striker Plate Set (H0850721), 1each.• 10 - 32 Spring Nuts (/G1532), 2 each.• 10 - 32 x 1/2” Socket Head Cap Screws(10F50KCSS), 2 each.• #6 x 1/4” Self-tapping Screw (6N25TXFZ), 1each.
Hardware Recommended for Assembly:• None.
Note:• To use a magnetic catch assembly with aframe built from Tri-Slot Beam extrusions,refer to the Magnetic Catch Assembly for Tri-Slot Beam (H0801011) on the next page.
.
TEKNOH0801011
Magnetic Catch Assembly for Tri-Slot Support Beam
Typical Use:• To latch panels in place when the Tri-SlotSupport Beam is used in a vertical positionasshown in the “typical installation” illustrationat right.
Note:The standard Magnetic Catch Assembly(H0800911) can be used with the Tri-SlotSupport Beam if the catch is mounted on thelong side of the beam.
Features:• Compact and rugged.• Self-aligning magnets assure full contactand maximum holding power.• Ten pounds of pull required to break contactbetween surfaces.
Material:• Body: Plastic.• Magnetic Poles & Striker Plate: Steel.• Mounting Plate: Aluminum.
Weight:0.18 lb [0.08 kg]
Hardware Included with Assembly:• Magnet and Striker Plate Set (H0850721), 1each.• 10 - 32 Spring Nuts (/G1532), 2 each.• 10 - 32 x 3/8” Flat Head Cap Screws(10F37KFC), 2 each.• #6 x 1/4” Self-tapping Screw (6N25TXFZ), 1each.• 10 - 32 x 1/4” Socket Head Cap Screws(10F25KFCS), 2 each.• Mounting Angle Bracket (B0100821),1 each.
Hardware Recommended for Assembly:• None.
.
9-26ACCESSORIES
TEKNO 9-27ACCESSORIES
H0301921Covered Roller
Typical Use:• Cover Roller used on the Assembly of aPallet .
Features:• Excepts 3/8 and 10mm Flat Head Screw
Material:• Urethane,Sealed/Permanet LubricatedSealed Ball Bearing
Weight:
Hardware RecommendedFor Assembly:• 1/2”-13 x 7/8 Flat Head Cap Screw(1 each)
.
E0502021Corner Extrusion
pical Use:•Slide surface, Guide railFeatures:• Slide on corner of any support beam
Material:• High Density Polyethylene (UHMW)
Weight:
.
TEKNO9-28ACCESSORIES
B07005211x1 End Bracket
Typical Use:Features:• Can attach to 1x1 Beam with self tappingtorx screws.• Can attach by using a 3/4” x 7/8 T-Bolt• Can be used as rollers by attaching acovered roller to it (H0301921).
Material:• Die Cast Zinc
Weight:
Hardware RecommendedFor Assembly:• 1/4 - 20 x 1 Torx Screw• 3/4 x 7/8 T-Bolt• 1/2”-13 x 7/8 Flat Head Cap Screw
.
B07005111x1 End Bracket Swivel
Assembly
Features:• Can attach to 1x1 Beam with self tappingtorx screws.• Can attach by using a 3/4” x 7/8 T-Bolt
Material:• Die Cast Zinc
Weight:
Hardware RecommendedFor Assembly:• 1/4 - 20 x 1 Torx Screw• 3/4 x 7/8 T-Bolt
.
TEKNO 9-29ACCESSORIES
H1300311Tool Trolley Assembly
Typical UseFeatures:• Mounting Over of tool balancers• Fixtures that need to move
Material:• Steel
Weight:
Hardware RecommendedFor Assembly:• 8 cam rollers (H1300211)• 8 Jam nuts
.
H1300211Cam Roller
Material:• Hardened Steel Sealed/Permanet BallBearing Lubrication
Weight:
.
TEKNO
Stair Tread and WalkoversTekno’s Modu-Tek line also allows you to design and buildcompletely modular stair treads and walkovers for yourapplication. Built of the highest quality extruded anodizedaluminum, these structures provide lightweight, yet ultrasturdy platforms and staircases. Our tread plate materialis designed with a premium on safety; all of our treadplates feature raised rows of “teeth” for extra traction. Wealso offer vented tread plate that allows dirt and otheraccumulates to fall freely through the plate, virtuallyeliminating the risk of slippage. As is the case with anyModu-Tek product, these structures posess incredibleversatility and are easily configured/reconfigured for anyapplication; no drilling or tapping required! Call us today forfurther information on our Modu-Tek Walkovers and StairTreads!This Page
Intentionally LeftBlank
TEKNO 10-1ADDITIONAL PRODUCTS & SERVICES
Stair Tread and WalkoversTekno’s Modu-Tek line also allows you to design and buildcompletely modular stair treads and walkovers for yourapplication. Built of the highest quality extruded anodizedaluminum, these structures provide lightweight, yet ultrasturdy platforms and staircases. Our tread plate materialis designed with a premium on safety; all of our treadplates feature raised rows of “teeth” for extra traction. Wealso offer vented tread plate that allows dirt and otheraccumulates to fall freely through the plate, virtuallyeliminating the risk of slippage. As is the case with anyModu-Tek product, these structures posess incredibleversatility and are easily configured/reconfigured for anyapplication; no drilling or tapping required! Call us today forfurther information on our Modu-Tek Walkovers and StairTreads!
TEKNO10-2ADDITIONAL PRODUCTS & SERVICES
FlowRacks/Gravity Racks
Looking for innovative materialhandling solutions? Modu-Tek byTekno signals the end of yoursearch! Our vast array of extru-sions and brackets have lendedthemselves wonderfully to thecreation of flow racks and gravityracks. These structures providefunctionality and durability thatgoes above and beyond anythingelse in the industry. With a frame-work constructed of our heavy dutyhard-anodized aluminum extrusion,these racks are sturdy enough tohandle virtually any load, yet lightenough to move and/or reconfigureat a moments notice.
As with any Modu-tek structure, ourskilled professionals can design andbuild a flow rack/gravity rack to meetyour specific needs. Or you may preferto have it shipped to you in kit form, andusing three simple hand tools, as-semble it yourself in minutes with nodrilling/tapping required! Regardless ofthe application, Tekno has the solutionto meet your needs. Call us today!
TEKNO 10-3ADDITIONAL PRODUCTS & SERVICES
Systems Integration
Tekno Offers Turn-Key Manufacturing &Material Handling Systems IntegrationServices:
Tekno provides systems integration services toclients for projects large and small. With over 15years of experience in mainstream industry, bothdomestically and internationally, we have the provenknow-how, expertise, and product familiarity to makeyour automated production systems a success. Withinternal design, assembly, machining, control panelconfiguration, and programming capabilities, Teknooffers a breadth and depth of services worthy of theworld’s finest manufacturing facilities.
GEMINI® Conveyor Systems
Use Tekno’s own Gemini® Non-synchronous Con-veyor System for Palletized Product Assembly &Conveyance:
Tekno is an Original Equipment Designer and Manufacturer ofa world class line of modular non-synchronous conveyorcomponents. Gemini® conveyors can handle a wide variety ofproduct and carrier types, loads, sizes, and conveyancespeeds. Gemini® conveyors are extremely flexible inapplication, and they’re re-configurable when productionrequirements change. Hundreds of automated conveyance,assembly, and processing systems built from the well-established Gemini® System product line have been fieldedacross North America and beyond.
Custom Control Panels
Tekno has Internal Control Panel Design, Sourcing,Building, Programming, and Installation Capabilities:
Tekno designs and builds custom control panels, operatorinterface terminals, industrial computer enclosures, andfactory communications networks to customer specifications.All design work is performed by qualified engineers andtechnicians on AutoCAD workstations for convenient clientmodification and approval. Tekno’s in-house fabrication andassembly capability can provide enclosures, panel inserts,touch screens, and data collection / charting / display equip-ment of many styles and brands. Using the latest in designtechniques, materials, fabrication equipment, and third-partyhardware and software, Tekno’s engineers and technicianscan deliver the custom controls support you need for yourunique production and materials handling operations.
TEKNO10-4ADDITIONAL PRODUCTS & SERVICES
Custom Product Pallets
Check Out Tekno’s Own Internal Custom Pallet Design,Fabrication, and Build Capabilities:
Tekno can design and build product carriers of almostany size, shape, and composition, to very closetoleracnes. Tekno’s in -house fabrication, machining,and assembly capability can provide special fixtures,pallet electrification equipment, multiple-model cornerand prodcut support blocks, pallet-to-station lockingmethods, status flag, in -line product burn-in and testingfeatures, corner rollers, UHMW-PE glide edging, stoppercutouts, and raised aluminum pedestals, Send yourcustom applications our way.
TEKNO 10-5ADDITIONAL PRODUCTS & SERVICES
Special Machinery
Tekno’s Skilled Engineers & Technicians CanDesign, Fabricate, Build, and Install Special
Machinery to Meet Your Needs:
Tekno’s engineering, machining, fabrication,assembly, and documentation departments provide awealth of capabilities in the creation and applicationof custom machinery. With specialists in convey-ance, part fixturing, material flow, heat treatment,furnaces and ovens, vertical product lifts, brazingtechnology, manufacturing processes, in-line gaug-ing, product inspection and testing, automationprogramming and robotic applications, Tekno canhandle many types of special equipment projects.Special machinery is pre-built in our facility, thentested, de-bugged, and run off for the customer priorto shipment and installation of the equipment. Tohelp your operators and maintenance techniciansbetter understand and care for your new machinery,Tekno also offers various levels of custom documen-tation and training packages.
TEKNO
Notes: