addd:: i11661144 2wwhhirrllaawwaayy cctt ... - r-tek … · brochure r-tek international 214 martin...
TRANSCRIPT
RR--TTEEKK IINNTTEERRNNAATTIIOONNAALL LLLLCC AADDDD:: 11661144 WWHHIIRRLLAAWWAAYY CCTT,, AALLLLEENN,, TTEEXXAASS,, 7755000022,, UUSSAA
TTEELL:: ((880000)) 881100 66117766
FFAAXX:: ((881177)) 229900 00553377
EEMMAAIILL:: ssaalleess@@rrtteekkiinndduussttrriiaall..ccoomm
WWEEBB:: wwwwww..rrtteekkiinndduussttrriiaall..ccoomm
2015-2016 Brochure
R-TEK INTERNATIONAL
214 Martin Dr, Wylie, Texas, 75098, USA
2009-2010 Catalog
R-TEK INTERNATIONAL LLC
1614 Whirlaway Ct, Allen, Texas, 75002
2015-2016 Catalog
POWER TRANSMISSION BELT
R-TEK INTERNATIONAL LLC
The Industrial Solutions
1614 Whirlaway Ct, Allen, TX, 75002, USA Tel: (800) 810 6176 Fax: (817) 290 0537 Email: [email protected]
http://www.rtekindustrial.com
R-TEK INTERNATIONAL LLC TEL: 800 810 6176 FAX: 817 290 0537 EMAIL: [email protected] www.rtekindustrial.com
2
R-Tek International LLC, The eexxppeerrttss ffoorr rruubbbbeerr pprroodduuccttss,, wwiitthh oovveerr 4400 yyeeaarrss ooff eexxppeerriieennccee iinn rruubbbbeerr
VV--bbeellttss mmaannuuffaaccttuurriinngg,, ffaabbrriiccaatteess tthhee hhiigghheesstt qquuaalliittyy VV--bbeellttss ffoorr aallmmoosstt eevveerryy aapppplliiccaattiioonn..
IInn RR--TTeekk,, oouurr ffiirrsstt ggooaall iiss ttoo hheellpp oouurr ccuussttoommeerrss ffiinndd tthhee rriigghhtt ssoolluuttiioonnss ffoorr aannyy bbeellttiinngg aapppplliiccaattiioonn.. WWee ooffffeerr aa
ccoommpprreehheennssiivvee lliinnee ooff rruubbbbeerr VV--bbeellttss ttooggeetthheerr wwiitthh ppuulllleeyyss.. OOuurr ppoolliiccyy iiss ttoo ssuuppppllyy oouurr ccuussttoommeerrss wwiitthh tthhee hhiigghheesstt
ppoossssiibbllee ggrraaddee ooff pprroodduuccttss aatt tthhee lloowweesstt ppoossssiibbllee pprriiccee..
R-Tek International LLC Featured Power Transmission Belts:
1. Wrapped V-belts
2. Raw edge cogged V-belts
3. Industrial timing belts
4. Automotive belts
R-TEK INTERNATIONAL LLC
The Industrial Solutions
1614 Whirlaway Ct, Allen, TX, 75002, USA Tel: (800) 810 6176 Fax: (817) 290 0537 Email: [email protected]
http://www.rtekindustrial.com
R-TEK INTERNATIONAL LLC TEL: 800 810 6176 FAX: 817 290 0537 EMAIL: [email protected] www.rtekindustrial.com
3
The Product Category
Power Transmission Belts
Wrapped V- belt
Application:
Suitable for General Engineering Industries &
Agricultural Industries
Characteristics:
1. High tension
2. Low elongation
3. Long life span
4. High bending and wearing resistant
5. Heat and oil resistant
Available Types and Sizes:
TYPE PITCH WIDTH TOP WIDTH HEIGHT
M 8.50 10.00 5.50
Z 8.50 10.00 6.00
A 11.00 13.00 8.00
B 14.00 17.00 11.00
C 19.00 22.00 13.50
D 27.00 32.00 19.00
E 32.00 38.00 25.00
3L 8.20 3/8’’ 7/32’’
4L 10.50 1/2’’ 5/16’’
5L 13.70 5/8’’ 3/8’’
SPZ 8.50 9.70 8.00
SPA 11.00 12.70 10.00
SPB 14.00 16.30 13.00
SPC 19.00 22.00 18.00
3V 8.50 9.00 8.00
5V 14.30 15.00 13.00
8V 23.70 25.00 23.00
R-TEK INTERNATIONAL LLC
The Industrial Solutions
1614 Whirlaway Ct, Allen, TX, 75002, USA Tel: (800) 810 6176 Fax: (817) 290 0537 Email: [email protected]
http://www.rtekindustrial.com
R-TEK INTERNATIONAL LLC TEL: 800 810 6176 FAX: 817 290 0537 EMAIL: [email protected] www.rtekindustrial.com
4
Joint V- belt
Application:
Used in Vertical shaft drives, V-flat drives,
Compressors, Pumps and Agricultural drives.
Characteristics:
1. Excellent power transmission
2. Outstanding flexibility
3. Compact and low elongation
4. Heat and oil resistant
Available Types and Sizes:
TYPE PITCH WIDTH TOP WIDTH HEIGHT
AJ 11.00 13.00 9.9
BJ 14.00 17.00 13
CJ 19.00 22.00 16.2
DJ 27.00 32.00 22.4
SPZJ 8.50 9.70 10.5
SPAJ 11.00 12.70 12.5
SPBJ 14.00 16.30 15.6
SPCJ 19.00 22.00 22.6
3VJ 8.50 9.00 9.9
5VJ 14.30 15.00 15.1
8VJ 23.70 25.00 25.5
R-TEK INTERNATIONAL LLC
The Industrial Solutions
1614 Whirlaway Ct, Allen, TX, 75002, USA Tel: (800) 810 6176 Fax: (817) 290 0537 Email: [email protected]
http://www.rtekindustrial.com
R-TEK INTERNATIONAL LLC TEL: 800 810 6176 FAX: 817 290 0537 EMAIL: [email protected] www.rtekindustrial.com
5
Hexagonal V- belt
Application:
Suitable for all industrial applications that
requires rotation reversal on some driven shafts.
Characteristics:
1. Excellent power transmission
2. Outstanding flexibility
3. Low elongation
4. Corrosion resistant
5. Good resistance to moisture, oil and heat,
6. Good wear ability and long service life
Available Types and Sizes:
TYPE WIDTH THICKNESS ANGLE WEIGHT LENGTH RANGE
AA 13 10 40º 0.150 KG/M 1350MM-28000MM
BB 17 13 40º 0.250 KG/M 1350MM-28000MM
CC 22 17 40º 0.440 KG/M 1600MM-28000MM
DD 32 25 40º 0.935 KG/M 3000MM-28000MM
R-TEK INTERNATIONAL LLC
The Industrial Solutions
1614 Whirlaway Ct, Allen, TX, 75002, USA Tel: (800) 810 6176 Fax: (817) 290 0537 Email: [email protected]
http://www.rtekindustrial.com
R-TEK INTERNATIONAL LLC TEL: 800 810 6176 FAX: 817 290 0537 EMAIL: [email protected] www.rtekindustrial.com
6
NRaw Edge Cogged V- Belt
Application:
Suitable for all industrial applications especially
where space, weight, and horsepower are critical.
Characteristics:
1. High power transmission capability
2. Extraordinary abrasion resistant
3. Low elongation
4. Extreme transverse rigidity
5. Outstanding heat and oil resistant
Available Types and Sizes:
TYPE TOP WIDTH (MM) HEIGHT (MM) LENGTH (Ld=Lp)
ZX (AVX 10) 10 6 Li≈La-38 La≈Lp+16
AX (AVX 13) 13 8 Li≈La-50 La≈Lp+20
BX (AVX 17) 17 11 Li≈La-69 La≈Lp+29
CX (AVX 22) 22 14 Li≈La-88 La≈Lp+30
XPZ 9.7 8 Li≈La-51 La≈Lp+13
XPA 12.7 10 Li≈La-63 La≈Lp+18
XPB 16.3 13 Li≈La-82 La≈Lp+22
XPC 22 18 Li≈La-113 La≈Lp+30
3VX 9.5 (0.38’’) 8.0 (0.31’’) Li≈La-42 La≈Lp+4
5VX 15.5 (0.62’’) 13.5 (0.53’’) Li≈La-71 La≈Lp+11
Joint cogged V- belt
Application:
Used for vertical shaft drives such as agitators and
mixers.
Characteristics:
1. Excellent power transmission capability
2. Outstanding flexibility
3. Compact and low elongation
4. Abrasion, heat, and oil resistant
Available Types:
AXJ, BXJ, CXJ, 3VXJ, 5VXJ
R-TEK INTERNATIONAL LLC
The Industrial Solutions
1614 Whirlaway Ct, Allen, TX, 75002, USA Tel: (800) 810 6176 Fax: (817) 290 0537 Email: [email protected]
http://www.rtekindustrial.com
R-TEK INTERNATIONAL LLC TEL: 800 810 6176 FAX: 817 290 0537 EMAIL: [email protected] www.rtekindustrial.com
7
Agricultural V- belt
Application:
Suitable for shock loads, pulsation loads, vertical
Characteristics:
1. High flexibility
2. Excellent cross-section rigidity
3. Outstanding power transmission capability
4. Heat and oil resistant
Available Types and Sizes:
TYPE WIDTH (MM) HEIGHT (MM) WIDTH (INCH) HEIGHT (INCH)
HI 25.4 12.7 1 0.5
HJ 31.8 15.1 1.25 0.59
HK 38.1 17.5 1.5 0.69
HL 44.5 19.8 1.75 0.78
HM 50.8 22.2 2 0.88
HN 57.2 23.9 2.25 0.94
HO 63.5 25.4 2.5 1
R-TEK INTERNATIONAL LLC
The Industrial Solutions
1614 Whirlaway Ct, Allen, TX, 75002, USA Tel: (800) 810 6176 Fax: (817) 290 0537 Email: [email protected]
http://www.rtekindustrial.com
R-TEK INTERNATIONAL LLC TEL: 800 810 6176 FAX: 817 290 0537 EMAIL: [email protected] www.rtekindustrial.com
8
Poly V- Belt
Application:
Suitable for applications such as appliances,
outdoor power equipment, machine tools,
medical equipment, exercise equipment, etc.
Characteristics:
1. Higher transmission power
2. Lower elongation
3. Thin, soft belt carcass
4. Heat, oil and wearing resistant
5. Long life span
Available Types and Sizes:
TYPE PH PJ PK PL PM
Center Distance Pitch (mm) 1.6 2.34 3.56 4.7 9.4
Belt height (mm) 3 3.5 6 9.5 16.5
Weight per Rib (g/m) 5.9 8.4 20 30.9 124.1
Min. Pulley Diameter (mm) 13 20 40 75 180
Min. Reverse Bend Dia. (mm) 32 45 70 140 300
Length Range (mm) 380~2600 380~2600 500~2600 700~10000 2300~10000
R-TEK INTERNATIONAL LLC
The Industrial Solutions
1614 Whirlaway Ct, Allen, TX, 75002, USA Tel: (800) 810 6176 Fax: (817) 290 0537 Email: [email protected]
http://www.rtekindustrial.com
R-TEK INTERNATIONAL LLC TEL: 800 810 6176 FAX: 817 290 0537 EMAIL: [email protected] www.rtekindustrial.com
9
Variable speed belt
Application:
Used in gear changes, motorcycles and
agricultural machinery.
Characteristics:
1. Highly efficient power transmission
2. Smooth speed changes
3. Excellent acceleration response
4. High temperature and oil resistant
5. Small elongation
Available Types and Sizes:
Type Top width (mm) Thickness (mm) Length range (mm)
W16 17 6 500~1000
W20 21 7 560~1250
W25 26 8 710~1600
W31.5 33 10 900~2000
W40 42 13 1120~2500
W50 52 16 1400~3150
W63 65 20 1800~4000
W80 83 25 2240~5000
W100 104 32 2800~6300
R-TEK INTERNATIONAL LLC
The Industrial Solutions
1614 Whirlaway Ct, Allen, TX, 75002, USA Tel: (800) 810 6176 Fax: (817) 290 0537 Email: [email protected]
http://www.rtekindustrial.com
R-TEK INTERNATIONAL LLC TEL: 800 810 6176 FAX: 817 290 0537 EMAIL: [email protected] www.rtekindustrial.com
10
Industrial Timing Belt
Available Types:
Trapezia Teeth Rubber Timing Belt
Main type: XL, L, H, XH, XXH, T2.5, T5, T10, T20, AT5, AT10, AT20
Arc Teeth Rubber Timing Belt
Main type: HTD, STPD/STS, RPP/HPPD
R-TEK INTERNATIONAL LLC
The Industrial Solutions
1614 Whirlaway Ct, Allen, TX, 75002, USA Tel: (800) 810 6176 Fax: (817) 290 0537 Email: [email protected]
http://www.rtekindustrial.com
R-TEK INTERNATIONAL LLC TEL: 800 810 6176 FAX: 817 290 0537 EMAIL: [email protected] www.rtekindustrial.com
11
Trapezia Teeth Rubber Timing Belt
TYPE Pitch Tooth height Belt thickness
Angle (mm) (mm) (mm)
MXL 2.03 0.51 1.14 40
XL 5.08 1.27 2.30 50
L 9.53 1.91 3.60 40
H 12.70 2.29 4.30 40
XH 22.23 6.35 11.20 40
XXH 31.75 9.53 15.70 40
T2.5 2.50 0.70 1.30 40
T5 5.00 1.20 2.20 40
T10 10.00 2.50 4.50 40
T20 20.00 5.00 8.00 40
AT5 5.00 1.20 2.70 50
AT10 10.00 2.50 5.00 50
AT20 20.00 5.00 8.00 50
R-TEK INTERNATIONAL LLC
The Industrial Solutions
1614 Whirlaway Ct, Allen, TX, 75002, USA Tel: (800) 810 6176 Fax: (817) 290 0537 Email: [email protected]
http://www.rtekindustrial.com
R-TEK INTERNATIONAL LLC TEL: 800 810 6176 FAX: 817 290 0537 EMAIL: [email protected] www.rtekindustrial.com
12
Arc Teeth Rubber Timing Belt
Available types: HTD, STPD/STS, RPP/HPPD
1. HTD
Gear code Type Pitch Tooth height Belt thickness
(mm) (mm) (mm)
HTD
2M 2 0.75 1.36
3M 3 1.17 2.40
5M 5 2.06 3.80
8M 8 3.36 6.00
14M 14 6.02 10.00
20M 20 8.40 13.20
2. STPD/STS
Gear code Type Pitch Tooth height Belt thickness
(mm) (mm) (mm)
STPD/STS S2M 2 0.76 1.36
STPD/STS S3M 3 1.14 2.20
STPD/STS S4.5M 4.5 1.71 2.81
STPD/STS S5M 5 1.91 3.40
STPD/STS S8M 8 3.05 5.30
STPD/STS S14M 14 5.30 10.20
3. RPP/HPPD
Gear code Type Pitch Tooth height Belt thickness
(mm) (mm) (mm)
RPP/HPPD 2M 2 0.76 1.36
RPP/HPPD 3M 3 1.15 1.90
RPP/HPPD 5M 5 1.95 3.50
RPP/HPPD 8M 8 3.20 5.50
RPP/HPPD 14M 14 6.00 10.00
R-TEK INTERNATIONAL LLC
The Industrial Solutions
1614 Whirlaway Ct, Allen, TX, 75002, USA Tel: (800) 810 6176 Fax: (817) 290 0537 Email: [email protected]
http://www.rtekindustrial.com
R-TEK INTERNATIONAL LLC TEL: 800 810 6176 FAX: 817 290 0537 EMAIL: [email protected] www.rtekindustrial.com
13
Double teeth timing belt
The pitch and teeth type of double teeth timing belt is the
same as that of regular teeth timing belt.
There are two types of double teeth timing belt:
1. DA: Arrangement symmetrical 2. DB: Arrangement overlapping
Available Types and Sizes:
Type W T
D-MXL 0.508 1.53
D-XL 0.508 3.05
D-L 0.762 4.58
D-H 1.372 5.95
D-XH 2.794 15.49
D-XXH 3.048 22.11
D-T2.5 0.60 2.00
D-T5 1.00 3.40
D-T10 2.00 7.00
D-T20 3.00 13.00
D-AT10 2.00 7.00
HTD.DA-3M 0.76 3.10
HTD.DA-5M 1.143 5.26
HTD.DA-8M 1.372 8.17
HTD.DA-14M 2.9 14.84
HTD.DA-S8M 7.48
R-TEK INTERNATIONAL LLC
The Industrial Solutions
1614 Whirlaway Ct, Allen, TX, 75002, USA Tel: (800) 810 6176 Fax: (817) 290 0537 Email: [email protected]
http://www.rtekindustrial.com
R-TEK INTERNATIONAL LLC TEL: 800 810 6176 FAX: 817 290 0537 EMAIL: [email protected] www.rtekindustrial.com
14
PU timing belt
Application:
Used in textile, printing, chemical machines and
medical equipment.
Type:
Endless PU timing belt
Open-ended PU timing belt
Endless PU timing belt
Application:
Suitable for high power and precision motion control
at high speed.
Cord type:
Polyester, Kevlar and steel cord available.
Main type:
HTD, STS, RPP, MXL, XL, L, H, XH, T5, AT10, Double Teeth, etc.
Characteristics:
1. Excellent flexibility
2. Small pulley diameter and dimensional accuracy
3. High speed and energy efficient
4. Low noise and vibration
5. Perfect abrasion, chemical and ozone resistance
6. High friction surface
R-TEK INTERNATIONAL LLC
The Industrial Solutions
1614 Whirlaway Ct, Allen, TX, 75002, USA Tel: (800) 810 6176 Fax: (817) 290 0537 Email: [email protected]
http://www.rtekindustrial.com
R-TEK INTERNATIONAL LLC TEL: 800 810 6176 FAX: 817 290 0537 EMAIL: [email protected] www.rtekindustrial.com
15
Open-ended PU timing belt
Characteristics:
1. Consistent dimensional stability
2. Low pre-tension and noise
3. High wearing and abrasion resistant
4. High flexibility
5. Linear speed up to 80m/sec.
Cord type:
Polyester, Kevlar and steel cord available
We deliver the belts in standard roll length of 100 meters and sold by the roll or cut to the desired
length.
Main type:
HTD, STS, RPP, MXL, XL, L, H, XH, T5, AT10, etc.
R-TEK INTERNATIONAL LLC
The Industrial Solutions
1614 Whirlaway Ct, Allen, TX, 75002, USA Tel: (800) 810 6176 Fax: (817) 290 0537 Email: [email protected]
http://www.rtekindustrial.com
R-TEK INTERNATIONAL LLC TEL: 800 810 6176 FAX: 817 290 0537 EMAIL: [email protected] www.rtekindustrial.com
16
Automotive V- belt
Characteristics:
1. Oil and heat resistant
2. Aging resistant
3. High power transmission capability
4. Small elongation
5. Long life span
Material: Neoprene (CR)
Types: Raw edge, raw edge laminated and raw edge cogged.
Main section: AVX10, AVX13, AVX15, AVX17, and AVX22
Specifications:
Section Top width
(mm)
Thickness(mm)
Length range(mm) Raw edged
Raw edge
laminated Raw edge cogged
AVX10 10 7.5 7.5 8 595-2000
AVX13 13 8.5 8.5 9 600-2300
AVX15 15 - - 9 615-2500
AVX17 17 9.5 9.5 11 860-2500
AVX22 22 - - 13 860-2500
R-TEK INTERNATIONAL LLC
The Industrial Solutions
1614 Whirlaway Ct, Allen, TX, 75002, USA Tel: (800) 810 6176 Fax: (817) 290 0537 Email: [email protected]
http://www.rtekindustrial.com
R-TEK INTERNATIONAL LLC TEL: 800 810 6176 FAX: 817 290 0537 EMAIL: [email protected] www.rtekindustrial.com
17
Automotive timing belt
Application:
Used to transmit synchronous movement from one
driven shaft to another.
Characteristics:
1. Oil and heat resistant
2. Aging resistant
3. Non-slip
4. High power transmission capability
5. Small elongation
6. Long life span
Material: Neoprene (CR)
Main Tooth Type: ZA, ZB, MR, RU, RS, RPP, ZAS, YU, S8M, and STD
Specifications:
Type Pitch (mm) Teeth Height (mm) Thickness (mm)
ZA 9.525 1.91 4.1
ZB 9.525 2.3 4.5
ZBS 9.525 2.8 5.1
RU 9.525 3.44 5.7
MR 9.525 3.54 5.69
RS 9.525 3.6 5.8
YU 8 3 5.2
MY 8 3.06 5.2
S8M 8 3.05 5.3