SERIES SPECIFICATIONS
PROTECTION TYPE/THREAT LEVEL:
q NIJ III Plus
CONFIGURATION:
q Stand-Alone q ICW (In Conjunction With)
CONSTRUCTION:
PROTECTIVE COVERS AVAILABLE:
q Polyurea q Cordura w/ Welded Seams
HIT RATING:
q Single q Multi
MODEL #:
q DKX MAX III (NIJ Compliance Product List)
TESTING CERTIFICATION/STANDARD:
q NIJ 0101.061 q Special Threat Tested*
SPECIAL THREATS:
q .223 Rem 60gr Partition
q 7.62mm x 39mm 123gr Mild Steel Core
q 7.62mm x 51mm 147gr M80 FMJ
3
3
3
3
3
q Polyethylene q Alloy/Polyethylene
M3 SERIES(MAX III)
3
3
3
3
3
3
DKX ADVANCED MANUFACTURING, INC.Phone: 1-800-606-8317 | Fax: 1-352-672-6922
www.dkxarmor.comLIT: DKX-M3-010616
*Special Threat Testing conducted in accordance with an abbreviated and modified NIJ Standard 0101.06 / NIJ 0115.00.
q Ceramic/Polyethylene q Ceramic/Composite
The DKX M3 (MAX III) Series ballistic plates are NIJ 0101.06 level III certified stand-alone. The M3 also stops special, non-armor piercing threats, such as the Winchester Ranger and 7.62x39 MSC. The positive buoyancy of the M3 plates= provides users in waterborne or maritime environments added support and flotation, while a rigid polycarbonate backing gives superior blunt force trauma protection. Each DKX M3 Series plate= comes equipped with Radio Frequency Embedded Verification (RFEV) tracking for inventory management along with an industry first 7 year warranty. =Applies only to certified plate sizes.
1: If l isted as NIJ cert if ied, only sizes greater than the 7”x8” side plate may be considered compliant to the NIJ Standard-0101.06. Al l s ide plates equal to or less than 7”x8” are Independently Tested to the above standards.
DKX ADVANCED MANUFACTURING, INC.Phone: 1-800-606-8317 | Fax: 1-352-672-6922
www.dkxarmor.comMADE WITH PRIDEIN THE USA
Department of State ITAR / Department of Commerce EAR:This data sheet is for an EXPORT CONTROLLED PRODUCT. The export of these products and technical information related to these products is governed by the U.S. Department of State International Traff ic in Arms Regulations (ITAR) and/or the Department of Commerce Export Administration Regulations (EAR). Non-Sales Technical Data related to these products must not be transmitted to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civi l , or cr iminal penalt ies. ITAR/EAR Export Licenses and/or ITAR/EAR Brokering Licenses (as appropriate) wil l be required prior to submittal of any further technical information and/or shipment of samples and/or products.
LIT: DKX-M3-02112016
1. Al l s ize dimensions are ± 0.375”2. Al l thickness dimensions are ± 0.125”3. Al l weights are ± 4% or 0.50 lbs., whichever is greater
SHAPE SIZE1 (IN) THICKNESS2 (IN) WEIGHT3 (LBS) CURVATURE PRODUCT CODE
Full Size 5 x 6 0.73 0.85 Multi DKX-M3-56-SPS
Full Size 5 x 7 0.73 0.89 Multi DKX-M3-57-SPL
Full Size 6 x 8 0.73 1.23 Multi DKX-M3-68-SPXL
Full Size 10 x 12 1.30 3.15 Multi DKX-M3-1012-FS
Full Size 11 x 14 1.30 3.97 Multi DKX-M3-1114-FS
Shooter 10 x 12 1.30 2.90 Multi DKX-M3-1012-SH
Shooter 11 x 14 1.30 3.50 Multi DKX-M3-1114-SH
Swimmer 10 x 12 1.30 2.70 Multi DKX-M3-1012-SW
Swimmer 11 x 14 1.30 3.50 Multi DKX-M3-1114-SW
Enhanced Swimmer 10 x 12 1.30 2.70 Multi DKX-M3-1012-ES
Enhanced Swimmer 11 x 14 1.30 3.50 Multi DKX-M3-1114-ES
PRODUCT SPECIFICATIONS
FULL SIZE SHOOTER SWIMMER ENHANCED SWIMMER
M3 SERIES(MAX III)
