Water Consultancy Services
LEGISLATION ON RECEIVING AND TREATMENT OF INDUSTRIAL WASTE WATER AT COMMUNITY SEWERAGE SYSTEM – EU AND EU COUNTRIES
Niina Vieno, Dr. (Tech.)Treatment of industrial wastewater from metalworking plants
St. PetersburgSeminar by International Advanced Water Technology Center of Ladec and Vodokanal of St.
PetersburgOctober 27, 2015
Niina Vieno 2
INDUSTRIAL FACILITY
DIRECT DISCHARGEDischarge of wastewater through own sewerage and wastewater treatment plant to the environment
UNDIRECT DISCHARGEDischarge of wastewater (untreated or pre-treated) via public sewerage and municipal wastewater treatment plant.
LEGISLATION AND REGULATION OF INDUSTRIAL WASTEWATERS
Geographical division International conventions Community level (e.g. EU) regulations State level regulations
Regulation regarding water supply and environmental protection
Regulations regarding the quality of sewage sludge Chemicals regulations Waste regulations Regulations and standards on specific industrial field Other agreements and orders
Niina Vieno 3
Niina Vieno 4
GLOBAL: Stockholm Convention on Persistent Organic Pollutants
Stockholm Convention (2004)Global treaty to protect human health and the
environment from chemicals that remain intact in the environment for long periods, become widely distributed geographically, accumulate in the fatty tissue of humans and wildlife, and have harmful impacts on human health or on the environment.
Prohibit, eliminate or restrict the production and use, as well as the import and export, of the intentionally produced POPs.
Reduce or eliminate releases from unintentionally produced POPs
Niina Vieno 5
EU LEGISLATIONS
Niina Vieno 6
Niina Vieno 7
EU LEGISLATION• EU Member States are free to adopt legislation in the
absence of EU legislation• Where the Community has acted, EU legislation is supreme
and binding, taking precedence over both past and future Member State actions
• Member States must at least, fullfil the requirements of the EU directives
FinlandSweden
Germany
EU legislative framework
Niina Vieno 8
Directive on industrial emissions (2010/75/EU)European Pollutant Release and Transfer Register (166/2006)CLP-regulation (1272/2008)
INDUSTRY MUNICIPAL WASTE WATERTREATMENT PLANT
AQUATIC ENVIRONMENT
SEWAGE SLUDGE
Urban wastewater directive(91/271/EEC and 98/15/EC)
Water Framework Directive (2000/60/EC)Priority substances Directive (2013/39/EU)
Sewage Sludge Directive (86/278/EEC)
Applies for specific industriese.g. Animal by-products directive (1069/2009)
Directive on Industrial Emissions (2010/75/EU)
In order to prevent, reduce and as far as possible eliminate pollution arising from industrial activities in compliance with the ‘polluter pays’ principle and the principle of pollution prevention
Environmental permit
Niina Vieno 9
The permit should also include emission limit values for polluting substances
Directive does not prevent Member States from maintaining or introducing more stringent protective measures.
Categories of activities that require environmental permit
Energy industriesProduction and processing of metalsMineral industryChemical industryWaste management
Urban wastewater treatment plants discharging > 50 m3/day wastewater into the environment.
Niina Vieno 10
Production and processing of metals
Metal ore (including sulphide ore) roasting or sintering
Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5 tonnes per hour
Processing of ferrous metals: operation of hot-rolling mills with a capacity exceeding 20 tonnes of crude steel per hour; operation of smitheries with hammers the energy of which exceeds 50 kilojoule per hammer,
where the calorific power used exceeds 20 MW; application of protective fused metal coats with an input exceeding 2 tonnes of crude steel
per hour.
Operation of ferrous metal foundries with a production capacity exceeding 20 tonnes per day
Processing of non-ferrous metals: production of non-ferrous crude metals from ore, concentrates or secondary raw materials by
metallurgical, chemical or electrolytic processes; melting, including the alloyage, of non-ferrous metals, including recovered products and
operation of non- ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals.
Surface treatment of metals or plastic materials using an electrolytic or chemical process where the volume of the treatment vats exceeds 30 m3
Niina Vieno 11
European Pollutant Release and Transfer Register (E-PRTR) (166/2006)
Releases of listed pollutants that must be reported by the operators of the facilities carrying out the specific activities, such as: Production and processing of metals Urban wastewater treatment plants of > 100.000 p.e.
No limit values has been decreed
Annex II lists pollutants and threshold values for reporting
Niina Vieno 12
CLP-regulation (1272/2008)Classification, Labelling and
Packaging of chemicals substances and mixtures.
Especially substances classified as hazardous to the aquatic environment should be considered when dealing with industrial wastewaters
Niina Vieno 13
Urban wastewater directive (91/271/EEC and 98/15/EC)
The Directive require Member States to establish systems of prior regulation or authorisation for discharges of industrial wastewater into urban sewage collecting systems to ensure:
Treatment plant operation and sludge treatment will not be impeded;
No adverse effect on the environment (including receiving waters) will occur; and
The safe disposal of sewage sludge.
Annex I lists general requirements for industrial wastewater discharged into urban collecting systems.
Niina Vieno 14
General requirements Industrial waste water entering collecting systems and urban
waste water treatment plants shall be subject to such pre-treatment as is required in order to : protect the health of staff working in collecting systems and
treatment plants, ensure that collecting systems, waste water treatment plants
and associated equipment are not damaged, ensure that the operation of the waste water treatment plant and
the treatment of sludge are not impeded, ensure that discharges from the treatment plants do not
adversely affect the environment, or prevent receiving water from complying with other Community Directives,
ensure that sludge can be disposed of safety in an environmentally acceptable manner
Niina Vieno 15
Priority substances in the field of water policy (2013/39/EC)
As a matter of priority, causes of pollution should be identified and emissions of pollutants should be dealt with at source, in the most economically and environmentally effective manner.
List of Hazardous substances (emissions should be
reduced)Priority hazardous substances (cessation or
phasing out of discharges and emissions)Niina Vieno 16
Niina Vieno 17
LIST OFPRIORITY
SUBSTANCESAND
PRIORITY HAZARDOUS SUBSTANCES
• Use of these compounds should be reduced or banned
• Environmental quality standard
WATCH LIST OF EMERGING
POLLUTANTS
These compounds should be monitored-> can be classified as priority substance- No environmental quality standard
Priority substances and watch list substances
Use of sewage sludge in agriculture (86/278/EEC)
The use of sewage sludge in agriculture in such a way as to prevent harmful effects on soil, vegetation, animals and man
Limit values for heavy metals in soils
Limit values for heavy metals in sludge for use in agriculture
Niina Vieno 18
FINLAND
Niina Vieno 19
Laws and Regulations
Implemented EU directives and regulations:
• Law on Water Supply (681/2014)
• Environmental Protection Law (169/2000)
• Decree on Urban Wastewater (888/2006)
• Decree on Substances Hazardous to Aquatic Environment (1022/2006 & 868/2010)
Industrial wastewater agreements
Decree on Substances Hazardous to Aquatic Environment (1022/2006 &
868/2010) Annex 1A: Substances that are prohibited to
discharge to surface waters or to public sewers.
Annex 1B: Maximum allowed concentrations in emissions
Annex 1C: Substances hazardous to the environment in a Community level (EU priority substances)
Annex 1D: Substances hazardous to the environment in a State level (specific to Finland)
Niina Vieno 20
Industrial wastewater agreementsFinnish Water Utilities Association:
Industrial wastewater guide – conveying direct non-household wastewater to sewers
Niina Vieno 21
INDUSTRY MUNICIPAL WASTE WATERTREATMENT PLANT
AGREEMENT
MunicipalityRegional State Administrative Agencies
Centre for Economic Development, Transport and the Environment
Content of the agreement Contains terms in regard to:
Wastewater quantity and quality (e.g. pH, BOD, nutrients, hazardous substances) NOTE that the wastewater treatment plant can decide on the limit
values for hazardous substances How the wastewater is discharged to the public sewer Pre-treatment of the industrial wastewater Obligations regarding communication Monitoring of the wastewater quantity and quality Tariffs Contractual terms (changes, terminations, liability of damages,
sanctions)
Niina Vieno 22
Wastewater tariffs For industrial wastewaters, tariffs are normally defined by
multiplying the residential tariff by factor that is > 1. This factor takes into account additional costs caused to
the municipal wastewater treatment plant due to maintenance of sewers and the treatment plant, and hindrances in the treatment process caused by the
different quality of the industrial wastewater compared to the municipal wastewater
The quantity and quality of the industrial wastewater affects on the tariff Tariff is different for every facility
Niina Vieno 23
SWEDEN
Niina Vieno 24
Swedish Water and Wastewater Association has published a guide for municipal wastewater treatment plants on receiving industrial wastewater.
Focus is on environmentally hazardous substances The industrial facility is responsible in finding out and reporting
the substances and their concentrations in the wastewater intended to be discharged to the public sewer.
Wastewater treatment plant can decide on the limit values for hazardous substances: Substances can be hazardous to the sewers (e.g. corrosion) Substances can affect the wastewater treatment, the quality of sludge
or the quality of the receiving surface water.
For example: Käppala WWTPGuides for pre-treatment
of industrial wastewatersE.g. WWTP recommends
that the wastewaters from washing hands in metal industry should be pre-treated due to increased concentrations of cadmium in wastewater.
Niina Vieno 25
GERMANYGerman Wastewater Regulation defines State of the
Technical Art with respect municipal wastewater as well as regarding wastewater from several industries
Minimum requirements are valid for the whole Federal Republic of Germany.Every state can decide on the specific requirements
Specific demands on wastewater of given industry segments before this sewage is mixed with other wastewaterDemands relate to harmful substances
Niina Vieno 26
Niina Vieno
Contact information
Niina Vienopuh. 050 [email protected]
www.envieno.com
Thank you for your attention!