-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
1/20
LINEAR MOTOR ACTUATORS
LMS SERIES
-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
2/20
PBA Systems designs and manufactures motion control products, including linear servo motors,linear motor modules, piezo stages, large XYZ Theta stages and special customized solutions. We
also distribute complimenting products such as controllers, servo amplifiers, encoders, air bearings
etc, to provide complete solutions to our customers. Our focus in quality products and sound
technical support has earned us a reputation of a reliable motion control partner for our custom-
ers.
Design capabilities:
Finite Element Analysis (FEA)
Motor design
Motion analysis
Manufacturing/Inspection services:
Laser interferometer calibration
High precision probes
Natural frequency vibration analysis
DX Series Linear Motors
DX20, DX30, DX50, DX65
Direct Drive, low settling time,
zero back lash, no cogging
Speeds of 5 m/s; acceleration up to 10G
Continuous force 10 N 924 N
Peak force 43N- 4620N
Customised Modules/Systems
Pick and Place system
Inspection system
Photonics/Fibre optics alignment
Special customized modules
Material handling Precision XYZ module
-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
3/20
Pba
LMS SERIES
Part Numbering System
LMS 30 XX C2 X2 SXX LXX 1 XX
20
30
50
65
Motor Size Coil Size
C1
C2
C3
C4
LM Guide
Blank - Single guide
DG - Double guide
No. of carriages
Blank - 1
X2 - 2
X3 - 3
X4 - 4
Stroke Length
S60 - 60mm
S120 - 120mm
S180 - 180mm
S240 - 240mm
Module Length
L280
L340
L400
L460
Encoder Resolution
0.0012 - 1.22nm
0.0025 - 2.5nm
0.005 - 5nm
0.02 - 20nm
0.05 - 50nm
0.1 - 0.1 m
0.5 - 0.5 m
1 - 1 m
2 - 2 m
5 - 5 m
10 - 10 m
u
u
u
u
u
u
SPECIAL#
Blank - Standard
SS - Sealing Strip
S1
S2
S3
LMS MODEL
-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
4/20
Pba
Protective Cover
Single or multiplemoving carriage
High StrengthAluminium Profile(Precision Marchined)
Direct Drive Linear MotorPlug and play Module
Comparison With Traditional Actuators
Features of LMS Series Linear Motor Actuators
Features Ball Screw Actuators Timing Belt ActuatorsLMS Series LinearMotor Actuators
Speed
Motor
Backlash
Servo Feedback/Accuracy
Dirve Design
Reliability
Smoothness
Max 1.5 m/s
Rotary Servo Motor
3um- 5um
Rotary Encoder
Complicated(Many mechanical parts)
Wear and Tear(high maintenance)
Noisy when moving fast
Max 3.5 m/s
Rotary Servo Motor
10 um -100um
Rotary Encoder
Complicated(Many mechanical parts)
Wear and Tear(high tensioning requiredperiodically)
Noisy
Max 20 m/s
Linear Servo Motor
Zero Backlash
Linear encoder(Measure actual linear
position)Simple design(Direct drive)
Least maintenance(no contact between coil& track)
Smooth Motion
Linear Encoder for trueposition feeback
LM GuideSingle/Double
1
LMS model
-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
5/20
LMS Series Linear Motor Specifications
Model Number Resolution( m)
Max. Velocity
(m/s)
LMS20
LMS30
LMS50
LMS30DG
LMS50DG
LMS65DG
Straightness( m)u u
0.1
0.5
5.0
1.0
10
0.5
1.5
4.0
5.0
5.0
20
20
20
20
30
Accuracy Evaluation
State-of-the-art laser Calibra-
tion systems are utilized for
verifying LM series linear
motor actuators accuracy
and performance specifica-
tions.
2
0.05 1 20
......
LMS model
5
-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
6/20
Descriptions LMS20-C2Unit
Peak Force
Maximum Velocity
LMS 20
Linear Motor Module
LMS model
features
Technical Specification
LMS20-C3 LMS20-C4
Continuous Force1
Maximum Acceleration
Maximum Carriage Weight
N
N
m/s
m/s2
kg
21.5
86
5
100
0.96
32.25
129
5
100
1.12
43.0
172
5
100
1.27
Total Module Length
(mm)
Base Weight
(kg)
2
288
408
528
648
768
888
1008
1128
3.7
5.2
6.8
8.3
9.8
11.3
12.8
14.3
Standard Stroke (Travel )(mm)
3
120
240
360
480
600
720
840
960
90
210
330
450
570
690
810
930
60
180
300
420
540
660
780
900
1 Please request for free motor selection software.
2 Total module weight =base weight +moving carriage weight.
3 Custom lengths are available, please consult factory.
4 Subject to encoder resolution.
Three basic models are available covering different load, speed and travel requirements.
3
4
Direct Drive Design
High Speed
High Strength Aluminium Profile
Resolution of 10 m, 3 m, 5 m,1 m, 0.5 m, 0.1 m,
50nm, 20nm, 5nm, 2.5nm, 1.22nm.
Zero Backlash
Least Maintenance Required
u u u u u u
-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
7/20
C1, C0
Mor
136
126
C1, C0
74.5
30
22
113
123.5
Extemal
Limit Switch Option
Intemal Motor Cable
System for Stroke
-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
8/20
LMS model
Descriptions LMS30-C1Unit
Peak Force
Maximum Velocity
LMS 30
Linear Motor Module
features
Technical Specification
LMS30-C2 LMS30-C3
Continuous Force1
Maximum Acceleration
Maximum Carriage Weight
N
N
m/s
m/s2
kg
72
267
5
100
1.53
108
400
5
100
1.97
144
533
5
100
2.45
Total Module Length
(mm)Base Weight
(kg)
2
315
435
555
675
795
915
1035
1155
2.3
3.4
4.5
5.7
6.8
7.9
9.1
10.2
Standard Stroke (Travel )(mm)
3
120
240
360
480
600
720
840
960
120
240
360
480
600
720
840
60
180
300
420
540
660
780
1 Please request for free motor selection software.
2 Total module weight =base weight +moving carriage weight.
3 Custom lengths are available, please consult factory.
4 Subject to encoder resolution.
Four basic models are available covering different load, speed and travel requirements.
LMS30-C4
36
133
5
100
1.03
60
180
300
420
540
660
780
900
- -
5
4
Direct Drive Design
High Speed
High Strength Aluminium Profile
Resolution of 10 m, 5 m, 2 m, 1 m, 0.5 m, 0.1 m,
50nm, 20nm, 5nm, 2.5nm, 1.22nm.
Zero Backlash
Least Maintenance Required
u u u u u u
-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
9/20
Mounting Holes Dimensions
0 x 1002 x 200
2 x 100
4 x 100
6 x 100
A
26
6
10
14
610
10
14
18
E F
315435
555
675
795
1035
915
1155
6 x 100
8 x 100
8 x 100
14
18
18
Total no. of holes
18
22
22
Contact us for customised specifications([email protected])
Moving Plate Dimensions
B
C
D
LMS 30-C2 LMS 30-C3 LMS 30-C4
180
3 x 52
8
240
4 x 54
10
300
5 x 55.2
12
LMS 30-C1
120
2 x 48
6
Bearing Load & Moment Ratings
Dyamic Load C1
Static Load Co
Static Moment Mor
Static Moment Mop
Static Moment Moy
KN
KN
Nm
Nm
Nm
14.4
29
200
180
180
All Models
C1, C0
Mor
136
126
C1, C0
113 3
0
22
117
123.5
Limit Switch Option
Motor Cable
M4 Nut Slot
A
Stroke B
10
D - M4 X Dep1010
2 - 4 X H7
C 12
A - 14040 30
87
30
4 - M6 X Dep10 (Both ends)Mounting Holes
4 - 6 H7 (Both ends)
A /2 E
F - M6 X Dep10Mounting Holes
E
Mop
LMS model
Dimensions
LMS 30
6
Moy
-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
10/20
Descriptions LMS30-C1Unit
Peak Force
Maximum Velocity
LMS 50
Linear Motor Module
features Direct Drive Design
High Speed
High Strength Aluminium Profile
Resolution of 10 m, 5 m, 2 m, 1 m, 0.5 m, 0.1 m,
50nm, 20nm, 5nm, 2.5nm, 1.22nm.
Zero Backlash
Least Maintenance Required
u u u u u
Technical Specification
LMS30-C2 LMS30-C3
Continuous Force1
Maximum Acceleration
Maximum Carriage Weight
N
N
m/s
m/s2
kg
126
450
5
100
1.57
189
675
5
100
2.04
252
920
5
100
2.54
Total Module Length
(mm)
Base Weight
(kg)
2
315
435
555
675
795
915
1035
1155
7.7
10.8
14.1
17.3
20.5
23.7
26.9
30.2
Standard Stroke (Travel )(mm)
3
120
240
360
480
600
720
840
960
120
240
360
480
600
720
840
60
180
300
420
540
660
780
1 Please request for free motor selection software.
2 Total module weight =base weight +moving carriage weight.
3 Custom lengths are available, please consult factory.
4 Subject to encoder resolution.
Four basic models are available covering different load, speed and travel requirements.
LMS30-C4
63
225
5
100
1.06
60
180
300
420
540
660
780
900
- -
LMS model
7
4
u
-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
11/20
LMS model
8
Dimensions
LMS 50
C1, C0
Mor
136
126
C1, C0
113
30
22
117
123.5
Limit Switch Option
Motor Cable
M4 Nut Slot
A
Stroke B
10
D - M4 X Dep1010
2 - 4 H7
C 12
A - 14040 30
87
30
4 - M6 X Dep10 (Both ends)Mounting Holes
4 - 6 H7 Dep8 (Both ends)
A /2 EF - M6 X Dep10Mounting Holes
E
Mop
Mounting Holes Dimensions
0 x 100
2 x 200
2 x 100
4 x 100
6 x 100
A
2
6
6
10
14
6
10
10
14
18
E F
315
435
555
675
795
1035
915
1155
6 x 100
8 x 100
8 x 100
14
18
18
Total no. of holes
18
22
22
Contact us for customised specifications([email protected])
Moving Plate Dimensions
B
C
D
LMS 50-C2 LMS 50-C3 LMS 50-C4
180
3 x 52
8
240
4 x 54
10
300
5 x 55.2
12
LMS 50-C1
120
2 x 48
6
Bearing Load & Moment Ratings
Dyamic Load C1
Static Load Co
Static Moment Mor
Static Moment Mop
Static Moment Moy
KN
KN
Nm
Nm
Nm
14.4
29
200
180
180
All Models
Moy
-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
12/20
LMS DG..model
LMS 30DG
Linear Motor Module
9
Descriptions LMS30DG-C1Unit
Peak Force
Maximum Velocity
features Direct Drive Design
High Speed
High Strength Aluminium Profile
Resolution of 10 m, 5 m, 2 m, 1 m, 0.5 m, 0.1 m,
50nm, 20nm, 5nm, 2.5nm, 1.22nm.
Zero Backlash
Least Maintenance Required
u u u u u
Technical Specification
Continuous Force
Maximum Acceleration
Maximum Carriage Weight
N
N
m/s
m/s2
kg
36
133
5
100
120
72
267
5
100
180
144
533
5
100
300
1 Please request for free motor selection software.
2 Total module weight =base weight +moving carriage weight.
3 Custom lengths are available, please consult factory.
4 Subject to encoder resolution.
Four basic models are available covering different load, speed and travel requirements.
LMS30DG-C2 LMS30DG-C3 LMS30DG-C4
108
400
5
100
240mmMaximum Carriage Length
1.5 2 32.5
4
u
-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
13/20
LMS DG..MODEL
10Contact us for customised specifications([email protected])
Bearing Load & Moment Ratings
Dyamic Load C1
Static Load Co
Static Moment Mor
Static Moment Mop
Static Moment Moy
KN
KN
Nm
Nm
Nm
31.2
54
1768
810
810
All Models
Module Lt=Carriage Lt +Stroke +100
20*
Q
150
Dimensions
LMS 30DG
Carriage Lt
30 XN
Moy
171
111
8H7(2X) 8 M6 12
(Stroke / 20) +8
Hard Stop
Carriage Lt (Stroke / 2) +8
Hard StopMop
(Stroke / 2 )- 5 (Stroke / 2) +3
Home Limit Sensor
117
P*
c
a
G*b 120 120
6,FS 10
M8 12
608H7(2X)
Weight of Base =23kg/m
(Excluding Carriage wt)
Module weight =Base +Carriage
C1 2
4
6
8
Coil Size Carriage Lt
120
N
C2
C3
C4
180
240
300
NOTE
a. Incremental step of 120.
b. G =Q - 20
=>0
=
-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
14/20
LMS DG..model
11
LMS 50DG
Linear Motor Module
Descriptions LMS50DG-C1Unit
Peak Force
Maximum Velocity
features Direct Drive Design
High Speed
High Strength Aluminium Profile
Resolution of 10 m, 5 m, 2 m, 1 m, 0.5 m, 0.1 m
50nm, 20nm, 5nm, 2.5nm, 1.22nm.
Zero Backlash
Least Maintenance Required
u u u u u
Technical Specification
Continuous Force
Maximum Acceleration
Maximum Carriage Weight
N
N
m/s
m/s2
kg
63
225
5
100
2
126
450
5
100
2.5
252
920
5
100
3.5
1 Please request for free motor selection software.
2 Total module weight =base weight +moving carriage weight.
3 Custom lengths are available, please consult factory.
4 Subject to encoder resolution.
Four basic models are available covering different load, speed and travel requirements.
LMS50DG-C2 LMS50DG-C3 LMS50DG-C4
189
675
5
100
3
Maximum Carriage Length mm 120 180 300240
4
u
-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
15/2012
Contact us for customised specifications([email protected])
LMS dg..model
Bearing Load & Moment Ratings
Dyamic Load C1
Static Load Co
Static Moment Mor
Static Moment Mop
Static Moment Moy
KN
KN
Nm
Nm
Nm
31.2
54
1768
810
810
All Models
Module Lt=Carriage Lt +Stroke +100
20*
Q
170
Dimensions
Carriage Lt
30 XN
Moy
191
131
8H7(2X) M8 12
(Stroke / 2) +8
Hard Stop
Carriage Lt (Stroke / 2) +8
Hard StopMop
(Stroke / 2) - 5 (Stroke / 2) +3
Home Limit Sensor
137
P*
c
a
G*b 120 120
6,FS 10
M8 12
608H7(2X)
Weight of Base =30kg/m
(Excluding Carriage wt)
Module weight =Base +Carriage
C1 2
4
6
8
Coil Size Carriage Lt
120
N
C2
C3
C4
180
240
300
NOTE
a. Incremental step of 120.
b. G =Q - 20
=>0
=
-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
16/20
LMS dg..model
13
LMS 65DG
Linear Motor Module
Descriptions LMS65DG-C2Unit
Peak Force
Maximum Velocity
features Direct Drive Design
High Speed
High Strength Aluminium Profile
Resolution of 10 m, 5 m,1 m, 0.5 m, 0.1 m,
50nm, 20nm, 5nm, 2.5nm, 1.22nm.
Zero Backlash
Least Maintenance Required
u u u u u
Technical Specification
Continuous Force
Maximum Acceleration
Maximum Carriage Weight
N
N
m/s
m/s2
kg
154
760
5
100
5
231
1140
5
100
6
616
3040
5
100
11
1 Please request for free motor selection software.
2 Total module weight =base weight +moving carriage weight.
3 Custom lengths are available, please consult factory.
4 Subject to encoder resolution
Five basic models are available covering different load, speed and travel requirements.
LMS65DG-C3 LMS65DG-C4 LMS65DG-C6
308
1520
5
100
7
LMS65DG-C8
462
2280
5
100
9
Maximum Carriage Length mm 180 240 540300 420
4
-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
17/20
LMS DG..model
Contact us for customised specifications([email protected])
14
Bearing Load & Moment Ratings
Dyamic Load C1
Static Load Co
Static Moment Mor
Static Moment Mop
Static Moment Moy
KN
KN
Nm
Nm
Nm
75.2
97.6
4148
1064
1064
All Models
Module Lt=Carriage Lt +Stroke +100
20*
Q
212
Dimensions
Carriage Lt
60 XN
Moy
240
170
10H7(2X) M8 16
(Stroke / 2) +8
Hard Stop
Carriage Lt (Stroke / 2) +8
Hard StopMop
(Stroke / 2) - 5 (Stroke / 2) +3
Home Limit Sensor
170
c
P*a
G*b 120 120
9,FS 16
M8 16
60
8H7(2X)
Weight of Base =50kg/m
(Excluding Carriage wt)
Module weight =Base +Carriage
C2 2
2
4
6
Coil Size Carriage Lt
120
N
C3
C4
C6
240
300
420
NOTE
a. Incremental step of 120.
b. G =Q - 20
=>0
=
-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
18/20
ba
15
LMS MODEL
Customized modules allow you to purchase the linear motorsystem as a complete package that is modular or plug andplay.This simplifies design, reduces assembly time and lowersthe cost of ownership.
Catalogue DX Series 79-02/07
Every care has been taken to ensure the correctness of the information contained in this book but no liability can be accepted for any errors or omissions.
Copyright reserved. This book or parts thereof may not be reproduced without our permission.
-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
19/20
AIS Ind ust rial Componen ts Ltd
Address: Rm.2313-2315, 23/F, Block A, Stars Plaza,
Hua Qiang Bei Road, Futian District,
Shenzhen, China Zip: 518028
Tel: (86-775) 83747600, 83747595
Fax: (86-775) 83747605
Email: [email protected]
Ningbo Jingfeng Magnets Co Ltd
Address: Ninbo Economic & Technical
Development Zone G1. No7, Xiaogang,
Ninbo China Postal Code 315083
Tel: (86-574) 862 20333
Fax: (86-574) 862 20333
Email: [email protected]
Ninbo Konit Nihon Magnetics Co Ltd
Address: Ninbo Economic & Technical
Development Zone China
Postal Code 315803
Tel: (86-574) 862 21333
Fax: (86-574) 862 21789
CHINA
AIS Ind ust rial Componen ts Ltd
Address: Rm.21, 22/F, New Tech Plaza
34, Tai Yau Street, San Po Kong,
Kowloon, Hong Kong-China
Tel: (852) 279 30311
Fax: (852) 279 30976
Email: [email protected]
PBA-AIS Systems Ltd
Address: Rm.21, 22/F, New Tech Plaza
34, Tai Yau Street, San Po Kong,Kowloon, Hong Kong-China
Tel: (852) 279 30311
Fax: (852) 279 30976
Email: [email protected]
HONG KONG
PT PBA Indonesia
Address: J I. Bulevar Raya. Block RA11 No.2kelapa Gading, J akarta Utara 14240,
Indonesia
Tel: (+62) 21 4587 4679
Fax: (+62) 21 4587 4680
H/P: (62)816 4846 547
Email: [email protected]
INDONESIA
Rep Office
Address: J apan, address, 4-27-3
sakae machi Takatsuki-shi Osaka
J apan 569-0825
Mobile: +81(0) 90 7360 7998
Email: [email protected]
JAPAN
MALAYSIA
PBA (M) Sdn Bhd
Address: No 34-1,Block A, J alan 1/116B,
Sri Desa Entrepreneurs' Park,
Off J alan Kuchai Lama,
58200 Kuala Lumpur
Tel: (03) 798 47101, 798 47102
Fax: (03) 798 24000
Email: [email protected]
PBA Industries (JB) Sdn Bhd
Address: 34-01, Jalan Permas 9/2B. B P ermas J aya, 81750, J .B. Malaysia
Tel / Fax: 07-388 7475
PBA Industries (PG) Sdn Bhd
Address: 17-2-5, Bayan Point,
Medan Kampung Relau,
11900, Penang, Malaysia.
Tel: (04) 6427915 / 04-6452916
Fax: (04) 6447434
Email: [email protected]
PM-BEARINGS B.V.Address: Galileistraat 2
7701 SK Dedemsvaart
The Netherlands
Tel: (31) 523-612 258
Fax: (31) 523-615 290
Email: [email protected]
NETHERLANDS
PBA (S) Pte Ltd
Philippines Rep Office
Address:157, Sin Ming Road
#02-01 Amtech Building (Annex Blk)
Singapore 575624
Tel: (65) 6552 7992
Fax: (65) 6552 6992
Email: [email protected]
Website: www.pbagroup.net
PHILIPPINES
PBA VIETNAM
Address: 18/3 THEP MOI STREET
WARD 12, TAN BINH DISTRICT,
HOCHIMINH CITY, Vietnam
Tel: (84) 87 156 350
Fax: (84) 87 159 344
Email: [email protected]
Website: www.pbagroup.net
VIETNAM
PBA (S) Pte Ltd
Headquarters
Address: 157, Sin Ming Road,
#02-01 Amtech Building (Annex Blk)
Singapore 575624
Tel: (65) 6552 7992
Fax: (65) 6552 6992
Email: [email protected]
Website: www.pbagroup.net
PBA Solutions Pte Ltd
Address: 157, Sin Ming Road,
#02-01 Amtech Building (Annex Blk)
Singapore 575624
Tel: (65) 6553 0047
Fax: (65) 6552 6992
Website: www.pbasolutions.com
Nihon Industrial Products Pte Ltd
Address:159, Sin Ming Road,
#02-01 Amtech Building
Singapore 575625
Tel: (65) 6552 3809
Fax: (65) 6552 7031
Email: [email protected]
Website: www.nihons.com.sg
PBA Systems Pte Ltd
Address: 159, Sin Ming Road,
#02-01 Amtech Building
Singapore 575625
Tel: (65) 6484 9390Fax: (65) 6484 2097
Email: [email protected]
Website: www.pbasystems.com.sg
PBA Technology Pte Ltd (QA251)
Address: 157, Sin Ming Road,
#02-01 Amtech Building (Annex BLK)
Singapore 575624
Tel: (65) 6552 8154 6552 8085
Fax: (65) 6552 7261
Email: [email protected]
Website: www.pbatechnology.com
PM-PBA Pte Ltd
Address: 157, Sin Ming Road,
#02-01 Amtech Building (Annex BLK)
Singapore 575624
Tel: (65) 6552 7992
Fax: (65) 6552 6992
Email: [email protected]
PBA Spindles Pte Ltd
Address: 157, Sin Ming Road,
#02-01 Amtech Building (Annex BLK)
Singapore 575624
Tel: (65) 6553 0950
Fax: (65) 6553 0950
Email: [email protected]
PBA Bearings (T) Co Ltd
Address: 24/101 Soi Lardprao 21, Jomphol
Chatujak Dist., Bangkok 10900
Tel: (662) 639 1249
Fax: (662) 639 1244
Email: [email protected]
THAILAND
SINGAPORE
Manufacturing Plants
INDIA
PBA Technology Pte Ltd
Address: Flat No.405, Lok Darshan, Marol,
Military Road, Andheri (east)
H/P: (919) 892 597 726
Email: [email protected]
pba group
-
7/29/2019 Ironless Linear Motor - LMS Linear Motor Actuator
20/20
PBA Systems Pte LtdAddress: 159, Sin Ming Road,#02-01 Amtech BuildingSingapore 575625
Tel: [+65] 6484 9390Fax: [+65] 6484 2097www.pbasystems.com.sgEmail: [email protected]. No.: 19-9904238-R
M
AK
ES
D
IFF
ER
EN
CE
S Y S T E M S