Download - Inventory Managementfinal
-
7/30/2019 Inventory Managementfinal
1/26
INVENTORY
MANAGEMENT
@ OM BIOMEDICS
PVT LTD
Submitted to
Dr. Sumit Singh Jasial
ContentsContents..................................................................................................................... 1
By :Annu Yadav (E-11)Govind Verma (E-27)Pranav Singh (E-37)Rajat Goyal (E-43)
-
7/30/2019 Inventory Managementfinal
2/26
INTRODUCTION........................................................................................................3
MEANING OF INVENTORY:-......................................................................................3
NATURE OF INVENTORIES :- ..................................................................................3
RAW MATERIALS:- ...................................................................................................3
WORK IN PROGRESS:- .............................................................................................3
PACKAGING MATERIAL:- .......................................................................................4
FINISHED GOODS:- ................................................................................................. 4
INVENTORY MANAGEMENT......................................................................................4
Two types of cost are involved in the inventory maintenance:-..............................6
OBJECTIVES OF INVENTORY MANAGEMENT.............................................................6
Operating Objectives:..............................................................................................7
Financial Objectives:............................................................................................. 8
Importance of inventory management....................................................................8
SUCCESSFUL INVENTORY MANAGEMENT...............................................................10
About Inventory Control........................................................................................ 11
ADVANTAGES OF INVENTORY CONTROL:..............................................................11
Inventory Costs..................................................................................................... 12
Safety Stock.......................................................................................................... 12
Ordering Costs.......................................................................................................12
The Cost of Shortfalls............................................................................................12Cyclical Counting................................................................................................... 13
TECHNIQUES OF INVENTORY MANAGEMENT.........................................................14
Economic Order Quantity...................................................................................... 15
Just in Time Inventory............................................................................................16
ABC Analysis.......................................................................................................... 17
Common Inventory Valuation Methods..................................................................18
Inflationary Effects on Valuation............................................................................19
INDUSTRY OVERVIEW............................................................................................20
Pharmaceutical industry in India..............................................................................20
Om Biomedic Private Limited...............................................................................21
Contact Details......................................................................................................22
Procedure followed by the company.....................................................................22
DATA COLLECTED.................................................................................................. 23
-
7/30/2019 Inventory Managementfinal
3/26
CONCLUSION ........................................................................................................26
INTRODUCTION
MEANING OF INVENTORY:-
Inventory is the physical stoke of goods maintained in an organization for its smooth sunning. In
accounting language it may mean stock of finished goods only. In a manufacturing concern, it
may includes raw materials, work-in-progress and stores etc. In the form of materials or supplies
to be consumed in the production process or in the rendering of services.
In brief, Inventory is unconsumed or unsold goods purchased or manufactured.
NATURE OF INVENTORIES :-
Inventories are stock of the product a company is manufacturing for sale and components that
make up the product. The various forms in which inventory exist in a manufacturing
company are raw materials, work in progress and finished goods.
RAW MATERIALS:-
Raw materials are those inputs that are converted into finished product though the
manufacturing process. Raw materials inventories are those units which have been purchased
and stored for future productions.
WORK IN PROGRESS:-
These inventories are semi manufactured products. They represent products that need more
work before they become finished products for sales.
-
7/30/2019 Inventory Managementfinal
4/26
PACKAGING MATERIAL:-
Packaging material includes those items which are used for packaging of perfumery product i.e.
cap of the bottle, pump, coller,liver, box etc.
FINISHED GOODS:-
Finished goods inventories are those completely manufactured products which are ready forsale. Stock of raw materials and work in progress facilitate production. While stock of finished
goods is required for smooth marketing operation. Thus, inventories serve as a link between the
production and consumption of goods.
INVENTORY MANAGEMENT
"managing the level of inventory is like maintaining the level of water in a bath tub with an open
drain. the water is flowing out continuously. if water is let in too slowly, the tub is soon empty. ifthe water is let in too fast, the tub overflows."
The dictionary meaning of inventory is 'stock of goods'. The investment in inventory is
very high in most of the undertakings engaged in manufacturing. The amount of investment is
sometimes more in inventory than in other assets. About 90 percent part of working capital is
invested in inventories. It is necessary for every management to give proper attention to
inventory management. A proper planning of purchasing, handling, storing and accounting
should form a part of inventory management. By proper planning it is possible for a company to
reduce its levels of inventories to a considerable degree, without any adverse effect on
production and sales, by using simply inventory planning and control technique. The reduction in
excessive inventories carries a favorable impact on company's profitability.
An efficient system of inventory management will determine.
1) What to purchase
-
7/30/2019 Inventory Managementfinal
5/26
2) How much to purchase
3) From where to purchase
4) Where to store, etc.
"Effective inventory management enables an organization to meet or exceed customers'
expectations of product availability while maximizing net profits or minimizing co.
Inventories constitute about 60% of current assets of companies of India. The manufacturing
companies hold inventories in the form of raw materials, work in process, finished goods, stores
and spares, chemicals, lubricants etc.
In a literal sense, inventory refers to stocks of anything necessary to do business. These stocksrepresent a large portion of the business investment and must be well managed in order to
maximize profits. In fact, many small businesses cannot absorb the types of losses arising from
poor inventory management. Unless inventories are controlled, they are unreliable, inefficient
and costly.
Inventory management simply means the methods you use to organize, store and replace
inventory, to keep an adequate supply of goods while minimizing costs. Each location where
goods are kept will require different methods of inventory management. Keeping an inventory,or stock of goods, is a necessity in retail. Customers often prefer to physically touch what they
are considering purchasing, so you must have items on hand. In addition, most customers prefer
to have it now, rather than wait for something to be ordered from a distributor. Every minute that
is spent down because the supply of raw materials was interrupted costs the company unplanned
expenses
Three motives for holding inventories:-
To facilitate smooth production and sales operation (transaction motive),
To guard against the risk of unpredictable changes in usage rate and delivery time
(precautionary motive)
-
7/30/2019 Inventory Managementfinal
6/26
-
7/30/2019 Inventory Managementfinal
7/26
Operating Objectives:
(1) Ensuring Availability of Materials: There should be a continuous availability of all
types of raw materials in the factory so that the production may not be help up wants of any
material. A minimum quantity of each material should be held in store to permit production
to move on schedule.
(2) Avoidance of Abnormal Wastage: There should be minimum possible wastage of
materials while these are being stored in the godowns or used in the factory by the workers.
Wastage should be allowed up to a certain level known as normal wastage. To avoid any
abnormal wastage, strict control over the inventory should be exercised. Leakage, theft,
embezzlements of raw material and spoilage of material due to rust, bust should be avoided.
(3) Promotion of Manufacturing Efficiency: If the right type of raw material is available tothe manufacturing departments at the right time, their manufacturing efficiency is also
increased. Their motivation level rises and morale is improved.
(4) Avoidance of Out of Stock Danger: Information about availability of materials should
be made continuously available to the management so that they can do planning for
procurement of raw material. It maintains the inventories at the optimum level keeping in
view the operational requirements. It also avoids the out of stock danger.
(5) Better Service to Customers: Sufficient stock of finished goods must be maintained to
match reasonable demand of the customers for prompt execution of their orders.
(6)Highlighting slow moving and obsolete items of materials.
(7) Designing poorer organization for inventory management: Clear cut accountability should
be fixed at various levels of organization.
-
7/30/2019 Inventory Managementfinal
8/26
Financial Objectives:
(1) Economy in purchasing: A proper inventory control brings certain advantages and
economies in purchasing also. Every attempt has to make to effect economy in purchasing
through quantity and taking advantage to favorable markets.
(2) Reasonable Price: While purchasing materials, it is to be seen that right quality of material
is purchased at reasonably low price. Quality is not to be sacrificed at the cost of lower price.
The material purchased should be of the quality alone which is needed.
(3) Optimum Investing and Efficient Use of capital: The basic aim of inventory control from
the financial point of view is the optimum level of investment in inventories. There should be
no excessive investment in stock, etc. Investment in inventories must not tie up funds that
could be used in other activities. The determination of maximum and minimum level of stock
attempt in this direction.
Importance of inventory management
1. COUNTING CURRENT STOCK
All businesses must know what they have on hand and evaluate stock levels with respect to
current and forecasted demands. You must know what you have in stock to ensure you can meet
the demands of customers and production and to be sure you are ordering enough stock in the
future. Counting is also important because it is the only way you will know if there is a problem
with theft occurring at some point in the supply chain. When you become aware of such
problems you can take steps to eliminate them.
-
7/30/2019 Inventory Managementfinal
9/26
-
7/30/2019 Inventory Managementfinal
10/26
Warehouse employees should be educated on the costs of improper inventory management. Be
sure they understand that the lower your profit margin, the more sales must be generated to make
up for the lost goods. Incentive programs can help employees keep this in perspective. When
they see a difference in their paychecks from poor inventory management, they are more likely
to take precautions to prevent shrinkage.
Each stock item in your warehouse or back room should have its own procedures for
replenishing the supply. Find the best suppliers and storage location for each and record this
information in official procedures that can easily be accessed by your employees.
Inventory management should be a part of your overall strategic business plan. As the business
climate evolves towards a green economy, businesses are looking for ways to leverage this trend
as part of the big picture. This can mean re-evaluating your supply chain and choosing
products that are environmentally sound. It can also mean putting in place recycling procedures
for packaging or other materials. In this way, inventory management is more than a means to
control costs; it becomes a way to promote your business.
SUCCESSFUL INVENTORY MANAGEMENTSuccessful inventory management involves balancing the costs of inventory with the benefits of
inventory. Many small business owners fail to appreciate fully the true costs of carrying
inventory, which include not only direct costs of storage, insurance and taxes, but also the cost of
money tied up in inventory. This fine line between keeping too much inventory and not enough
is not the manager's only concern. Others include:
Maintaining a wide assortment of stock -- but not spreading the rapidly moving ones too
thin;
Increasing inventory turnover -- but not sacrificing the service level;
Keeping stock low -- but not sacrificing service or performance.
-
7/30/2019 Inventory Managementfinal
11/26
Obtaining lower prices by making volume purchases -- but not ending up with slow-
moving inventory; and
Having an adequate inventory on hand -- but not getting caught with obsolete items.
The degree of success in addressing these concerns is easier to gauge for some than for
others. For example, computing
About Inventory Control
Inventory consists of the goods and materials that a retail business holds for sale or a
manufacturer keeps in raw materials for production. Inventory control is a means for maintaining
the right level of supply and reducing loss to goods or materials before they become a finished
product or are sold to the consumer.
Inventory control is one of the greatest factors in a companys success or failure. This part of the
supply chain has a great impact on the companys ability to manufacture goods for sale or to
deliver customer satisfaction on orders of finished products. Proper inventory control will
balance the customers need to secure products quickly with the business need to control
warehousing costs. To manage inventory effectively, a business must have a firm understanding
of demand, and cost of inventory.
ADVANTAGES OF INVENTORY CONTROL:
(1) Reduction in investment in inventory.
(2) Proper and efficient use of raw materials.
(3)No bottleneck in production.
(4) Improvement in production and sales.
(5) Efficient and optimum use of physical as well as financial resources.
(6)Ordering cost can be reduced if a firm places a few large orders in place of numerous small
orders.
(7)Maintenance of adequate inventories reduces the set-up cost associated with each production
-
7/30/2019 Inventory Managementfinal
12/26
Inventory Costs
There are three main types of cost in inventory. There are the costs to carry standard inventories
and safety stock. Ordering and setup costs come into play as well. Finally, there are shortfall
costs. A good inventory control system will balance carrying costs against shortfall costs.
Safety Stock
Safety stock is comprised of the goods needed to be kept on hand to satisfy consumer demand.
Because demand is constantly in flux, optimizing the Safety Stock levels is a challenge.
However, demand fluctuations do not wholly dictate a companys ability to keep the right supply
on hand most of the time. Companies can use statistical calculations to determine probabilities in
demand.
Ordering Costs
Ordering costs have to do with placing orders, receiving and stowage. Transportation and invoice
processing are also included. Information technology has proven itself useful in reducing these
costs in many industries. If the business is in manufacturing, then to production setup costs are
considered instead.
The Cost of Shortfalls
Stock out or shortfall costs represent lost sales due to lack of supply for consumers. Sales
departments prefer these numbers be kept low so that an ample stock will always be kept.
Logistics managers prefer to err on the side of caution to reduce warehousing costs.
-
7/30/2019 Inventory Managementfinal
13/26
Shortfall costs are avoided by keeping an ample safety stock on hand. This practice also
increases customer satisfaction. However, this must be balanced with the cost to carry goods.
The best way to manage stockout is to determine the acceptable level of customer service for the
business. One can then balance the need for high satisfaction with the need to reduce inventory
costs. Customer satisfaction must always be considered ahead of storage costs.
Cyclical Counting
Many companies prefer to count inventory on a cyclical basis to avoid the need for shutting
down operations while stock is counted. This means that a particular section of the warehouse or
plant is counted physically at particular times, rather than counting all inventory at once. Whilethis method may be less accurate than counting the whole, it is much more cost effective.
Cyclical counting is preferred because it allows for operations to continue while inventory is
taken. If not for this practice, a business would have to shut down while counts were taken, often
requiring the hire of a third party or use of overtime employees. Cyclical counting usually
utilizes the ABC rule, but there are other variations of this method that can be used. The ABC
rule specifies that tracking 20 percent of inventory will control 80 percent of the cost to store the
goods. Therefore, businesses concentrate more on the top 20 percent and counter other goods
less frequently. Items are categorized based on three levels:
A Category: Top valued 20 percent of goods, whether by economic or demand value
B Category: Midrange value items
C Category: Cheaper items, rarely in demand
Warehouse staff can now schedule counting of inventories based on these categories. The A
category is counted on a regular basis while B and C categories are counted only once a
month or once a quarter.
-
7/30/2019 Inventory Managementfinal
14/26
TECHNIQUES OF INVENTORY MANAGEMENT
The various techniques of inventory management are:-
1. Level Setting
2. EOQ
3. Price Break
4. Just In time Inventory
5. ABC Analysis
Level Setting
In order to have proper control on materials, following levels are set:-
a. RE ORDER LEVEL
b. MINIMUM LEVEL
c. MAXIMUM LEVEL
1. RE ORDER LEVEL - It is the point at which stock of a particular material in store
approaches, the storekeeper should initiate the purchase requisition for fresh supplies of
that material. The level is fixed somewhere between the maximum and the minimum
level.
-
7/30/2019 Inventory Managementfinal
15/26
MINIMUM LEVEL + CONSUMPTION DONE DURING THE TIME REQUIRED TO
GET FRESH STOCK
OR
(MAXIMUM CONSUMPTION X MAXIMUM RE ORDER PERIOD)
2. MINIMUM LEVELAlso called the safety stock, this represents the minimum quantity
of the material which must be maintained in hand at all times. The quantity is fixed so
that production may not be held up due to shortage of the material.
RE ORDER LEVEL (NORMAL CONSUMPTION *NORMAL RE ORDER PERIOD)
3. MAXIMUM LEVELIt represents the maximum quantity of an item of material which
can be held in stock at any time. Stock should not exceed this quantity. The quantity is
fixed so that there is no over-stocking.
RE ORDER LEVEL + RE ORDER QUANTITY (MINIMUM CONSUMPTION *
MINIMUM RE ORDERING PERIOD)
Economic Order Quantity
Economic order quantity is the order quantity that minimizes total inventory holding costs and
ordering costs. It is one of the oldest classical production scheduling models.EOQ applies only
when demand for a product is constant over the year and each new order is delivered in full when
inventory reaches zero. There is a fixed cost for each order placed, regardless of the number of
units ordered. There is also a cost for each unit held in storage, sometimes expressed as a
percentage of the purchase cost of the item.
Assumptions:-
1. The ordering cost is constant.
2. The rate of demand is known, and spread evenly throughout the year.
-
7/30/2019 Inventory Managementfinal
16/26
3. The lead time is fixed.
4. The purchase price of the item is constant i.e. no discount is available
5. The replenishment is made instantaneously i.e. the whole batch is delivered at once.
6. Only one product is involved.
It consists of two parts:-
1. CARRYING COSTS Cost of holding the materials in the store. Eg.- Cost of
warehousing, cost of racks etc.
2. ORDERING COSTS Cost of placing the order. Eg.-Cost of purchasing department,
stationery costs etc.
Formula of Economic Order Quantity: 2CO/I (under root)
C Carrying cost
O Ordering cost
I Interest payment of storing cost per unit per year
Price Break Model
When there is discount offered on larger quantities, it may appear that the holding costs may
increase. But discounts offered are so attractive that it outweighs the holding costs. The formulais the same as that of EOQ, only the holding costs/carrying costs changes according to the price
break.
Just in Time Inventory
-
7/30/2019 Inventory Managementfinal
17/26
Just-In-Time or JIT purchasing is the purchase of material or goods in such a way that delivery
of purchased items is assured before their use or demand. JIT purchasing recognizes too much
carrying costs associated with holding high inventory levels. Hence, it advocates developing
good relations with suppliers and making timely purchases from proven suppliers which can
make ready delivery of goods available as and when required.
JIT helps reduce the investment in inventory as more frequent purchase orders of small quantities
are made. Thus, the carrying cost is also reduced as a result of low investment in inventory. Also,
there is a reduction in the number of suppliers to be dealt with. Lastly, JIT reduces the wasting of
time by the workforce and the time is spent concentrated on the production process.
ABC Analysis
The ABC analysis is a business term used to define an inventory categorization technique often
used in materials management. It is also known as Selective Inventory Control. Policies based on
ABC analysis:
A ITEMS: very tight control and accurate records
B ITEMS: less tightly controlled and good records
C ITEMS: simplest controls possible and minimal records
The ABC analysis provides a mechanism for identifying items that will have a significant impact
on overall inventory cost, while also providing a mechanism for identifying different categories
of stock that will require different management and controls.
'A' items are very important for an organization. Because of the high value of these A items,
frequent value analysis is required. In addition to that, an organization needs to choose an
appropriate order pattern (e.g. Just- in- time) to avoid excess capacity.
'B' items are important, but of course less important, than A items and more important than C
items. Therefore B items are intergroup items.
'C' items are marginally important.
According to Pareto Principle, ABC has been divided into the following categories:
-
7/30/2019 Inventory Managementfinal
18/26
Class A items may represent only about 10% of the total inventory items, but they
represent about 70% of the total money value.
Class B items may represent about 20% of the total inventory items and they represent
about 20% of the total money value.
Class C items may represent about 10% of the total inventory items, but they represent
only about 10% of the total money value.
Using the classification each item should be handled in different way, with more attention
being devoted to category A, less to B , and still less to C.
Common Inventory Valuation Methods
The methods a company uses to value the costs of inventory have a direct effect on the business
balance sheets, income statements and cash flows. Three methods are widely used to value such
costs. They are First-In, First-Out (FIFO), Last-In First-Out (LIFO) and Average Cost. Inventory
can be calculated based on the lesser of cost or market value. It can be applied to each item, each
category or on a total basis.
FIFO
FIFO operates under the assumption that the first product that is put into inventory is also the
first sold. An example of this in action can be made when we assume that a widget seller
acquires 200 units on Monday for Rs.1.00 per unit. The next day, he spots a good deal and gets
500 more for Rs.75 per unit. When valuing inventory under the FIFO method, the sale of 300
units on Wednesday would create a cost of goods sold of Rs.275. That is, 200 units at Rs1.00
each and 100 units at Rs.75 each. In this way, the first 200 units on the income statement were
valued higher. The remaining 400 widgets would be valued at Rs.75 each on the balance sheet in
ending inventory.
LIFO
-
7/30/2019 Inventory Managementfinal
19/26
LIFO assumes instead that the last unit to reach inventory is the first sold. Using the same
example, the income statement and balance sheet would instead show a cost of goods sold of
Rs.225 for the 300 units sold. The ending inventory on the balance sheet would be valued at
Rs.350 in assets. When this method is used on older inventories, the companys balance sheet
can be greatly skewed. Consider the company that carries a large quantity of merchandise over a
period of 10 years. This accounting method is now using 10-year-old information to value its
assets.
WEIGHTED AVERAGE
Average Cost works out a weighted average for the cost of goods sold. It takes an average cost
for all units available for sale during the accounting period and uses that as a basis for the cost of
goods sold. To site our example again, we would calculate the cost of goods sold at [(200 x Rs.1)
+ (500 x Rs.75)]/700, or Rs.821 each. The remaining 400 units would also be valued at this rate
on the balance sheet in ending inventory.
SPECIFIC IDENTIFICATION
A less commonly used, but important method to valuation is called specific identification. This
method is used for high-end items that are more easily tracked. In some cases, this method can
be used for more common items, but less value is realized from this accounting method is such
cases. This is because powerful and detailed tracking software is required to employ specific
identification on large numbers of goods.
Inflationary Effects on Valuation
Market conditions change causing inflationary changes. When this happens, your
accounting method can have a strong impact on how healthy the business looks on income
-
7/30/2019 Inventory Managementfinal
20/26
-
7/30/2019 Inventory Managementfinal
21/26
The lack of patent protection made the Indian market undesirable to the multinational companiesthat had dominated the market, and while they streamed out. Indian companies carved a niche inboth the Indian and world markets with their expertise in reverse-engineering new processes formanufacturing drugs at low costs. Although some of the larger companies have taken baby stepstowards drug innovation, the industry as a whole has been following this business model until the
present.
Om Biomedic Private Limited
Om Biomedic Private Limited is an Indian Pharma Company is engaged in manufacturing andmarketing of pharmaceutical products based in Haridwar, Uttarakhand.
Om biomedic private limited was established in 2007 (year) with 250 employees and we are the
manufacturer and exporter of diclosenac injection , amikacinsulsate , ceseriaone , salbectam ,drried ferrous sulsate and folic acid. Om Biomedic Private Limited Drug Regulatory Departmenthas well trained personnel for reviewing drug registration procedures with various Ministries ofHealth across the globe and for making products dossiers.Om Biomedic Private Limitedworksas a sub unit of Akums limited and they also manufacture many products for this company.
Fact Sheet
Year of Establishment = 2007 IndiaMART Member Since = 2011
Nature of Business = Manufacturer Legal Status of Firm = Limited Liability/Corporation (Privately Held)
Number of Employees = 476 People
Company has expertise in
-
7/30/2019 Inventory Managementfinal
22/26
New Product Development Development of Analytical Method
Validation of Analytical Method
Technology Development & Transfer to others
Arranging B.E. Studies & Clinical Trials
Development of Reference & Working Standards
Novel Drug Delivery System (N.D.D.S)
Low RH Preparations with specific reference to SAMe (S-Adenosyl methionine) andclavulanic acid preparations
Taste Masking of Bitter drugs; and
Making drugs in palatable flavor.Company dedicates itself to humanitys quest for longer, healthier, happier lives throughinnovation in Pharmaceuticals Formulations; maintains its high ethical standards, making itsproducts & processes of high quality; and is committed to meeting the needs of its customers andconstantly focuses on customer satisfaction.
Contact Details
Om Biomedic Private Limited
Plot No- 68,69& 82- 83, Sector- 6-A, Sidcul,
Haridwar - 249 403, Uttarakhand, India
Procedure followed by the company
Sales order
Purchase planning
Master formula
Requirement generation
-
7/30/2019 Inventory Managementfinal
23/26
Market quotation
Purchase order
Inward
Quality testing
Approved stock
Consumption saleorder
Issuing of material
DATA COLLECTED
-
7/30/2019 Inventory Managementfinal
24/26
-
7/30/2019 Inventory Managementfinal
25/26
-
7/30/2019 Inventory Managementfinal
26/26
CONCLUSION
The data collected by us shows that the company follows the FIFO & FEFO methods ofinventory management for their different products according to the requirement of differentproducts, Whereas there major competitor like Ranbaxy & Sun Pharma uses the LIFO & FEFOfor their different products.