OVERCURRENT PROTECTION FUNDAMENTALS for consulting and design engineers
IMPROVE YOUR NEC® BASED COMMERCIAL AND INDUSTRIAL POWER SYSTEM PROTECTION
Seminar topics LocationEatonBussmann DivisionVince Saporita Technical Center 114 Old State RoadEllisville, MO 63021
Registration is by invitation only. Please contact your local Bussmann series product sales person or rep. Visit Eaton.com/bussmannseries for more information.
EatonBussmann Division114 Old State RoadEllisville, MO 63021United StatesEaton.com/bussmannseries
© 2017 EatonAll Rights ReservedPrinted in USAPublication No. 10376November 2017
Eaton and Bussmann are valuable trademarks of Eaton in the US and other coun-tries. You are not permitted to use the Eaton trademarks without prior written consent of Eaton. NEC is a registered trademark of the National Fire Protection Association, Inc.
• Fuseology and overcurrent protection basics
• Current limitation – Engineering short-circuit protection
• Electrical safety basics
• Power reliability and selective coordination
• Emergency, legally required standby and COPS systems
• Elevator disconnect requirements
• Interrupting and series ratings
• Surge protection overview
• NEC requirements for equipment SCCR
• Paul P. Gubany Center for High Power Technology tour and demonstrations
After completion of seminar, participants will receive a certificate of completion with 10 Professional Development Hours (PDHs).
Target audienceElectrical professionals involved with consulting, plant engineering and construction as well as electrical inspectors
SpeakersApplication engineers, product managers and other technical experts
Seminar cost• $200 to register• Lodging and meals provided by Eaton• Attendees responsible for transportation
2018 training dates | Two, 1.5-day sessions offered:April 17-18 | June 19-20
