Download - Grit finish
SURFACE FINISH
PRESENTED BY : BILAL KHAN BHURA UMAIR IQBAL ZAFAR JYOTI YADAV MOHD. RAGHIB OMID PAKSIMA TABISH IFTEKHAR
PRESENTATION
ON
1. INTRODUCTION2. NECESSITY 3. TECHNIQUES
STROKS STRIPLING TEXTURE SCIOGRAPHY
4. CONCLUSION
INDEX
DEFINITION- This plaster is a textured plaster done in two layers in panels with grooves as per pattern with different type of stone chipping 10 mm. nominal size. Min thickness is 30mm.
COMPOSITION – ( 1 cement : 0.5 coarse sand : 2 stone chipping (10 MM nominal size. )
Stones- Dholpur & Kotastone.
TYPES OF GRIT PLASTER- Depend upon types of stone chips.
PROPERTIES-
MOISTURE RESISTANCE - High DURABILITY - High durability TERMITE RESISTANT - Good ENVIRONMENTAL HAZARDS- Good FINISHING RESULTS - Good
Textured Finish
GRIT FINISH PLASTER
APPLICATIONS-
PROCEDURE OF APPLICATION-
1st LAYER- 12 mm cement plaster in 1: 4 Ratio.
2nd LAYER- 1:0.5: 2 ( 1 cement : 0.5 coarse sand : 2 stone chipping
(10 MM nominal size. ) Stones- Dholpur & Kotastone.
USES-
ARCHITECTURAL- Exterior finish of buildings.Residential, Commercial building,Intuitional buildings
NON-ARCHITECTURAL-Landscape Elements
Like feature wall boundary wall,
Pathways. BEST SUITED FOR- Public Buildings.
RATES -
Grit Plaster -270 RS./ sqm. Groove -20.50Rs/Run m.
ADVANTAGES- Requires Low maintenance. acoustical absorption
DISADVANTAGES- It cant be use in interior because of texture finish.
DEFINITION- Brickwork is masonry produced by a bricklayer, using bricks tile and mortar. Typically, rows of bricks in courses are laid one on top of another.
COMPOSITION – Brick tile230mmx115mmx40 mm ) Cement mortar – (1:3-1:5)
PATTERN IN BRICK TILE – English bond, Flemish Bond , other Patterns.
PROPERTIES-
MOISTURE RESISTANCE - Good DURABILITY - High durability TERMITE RESISTANT - Good ENVIRONMENTAL HAZARDS - Moderate Resistant
FINISHING RESULTS - Good reddish brown Texture Finish
BRICK TILE CLADDING
115
230
40
APPLICATIONS-
PROCEDURE OF APPLICATION-
1st LAYER- 10 mm base cement plaster in 1: 3-1:4 Ratio.
2nd LAYER-Queen closer of Brick tile (230mmx57.5mmx40mm)
USES-
ARCHITECTURAL- Exterior finish of buildings.
Residential, Commercial building,Intuitional buildings.
NON-ARCHITECTURAL-Landscape Elements
Like feature wall boundary wall,
Pathways. BEST SUITED FOR- Public Buildings in
plain areas.
57.5
230 40
RATES -
Brick tile cladding -320 RS./ sqm..
ADVANTAGES- Requires Low maintenance. acoustical absorption
DISADVANTAGES- It is not good in interior because of texture finish.
DEFINITION- Stone cladding is a thin layer of stone or simulated stone applied to a surface of building.
TYPES OF STONES–
STONE
NATURAL STONE
SAND STONE , LIME STONE,
GRANITE,QUARTZITE
MANUFACTURED STONE
MARBLE ,MOSAIC,
POLISHED STONE,FCD STONE,
SAND BLASTED STONE
STONE CLADDING
PROPERTIES-
MOISTURE RESISTANCE - Good DURABILITY - High durability TERMITE RESISTANT - High ENVIRONMENTAL HAZARDS - High Resistant FINISHING RESULTS - Smooth &
textured as/ stone
APPLICATIONS-
PROCEDURE OF APPLICATION-
1st LAYER- 10 mm base cement plaster in 1: 3-1:4 Ratio.
2nd LAYER- Stone panel as/ Spcs. USES-
ARCHITECTURAL- Exterior & interior finish of buildings.
Residential, Commercial building,Instuitional buildings.
NON-ARCHITECTURAL-Landscape Elements Like feature
wall boundary wall, bird bath
Pathways & fire place.
BEST SUITED FOR- interior & exterior both
RATES -
Rough stone -320 RS./ sqm. Local stone - Polished stone -
ADVANTAGES- Requires Low maintenance. Easy to clean. Good appearance. Cheap in hilly areas.
DISADVANTAGES- costly in Plain areas ,