SURFACE FINISH

PRESENTED BY : BILAL KHAN BHURA UMAIR IQBAL ZAFAR JYOTI YADAV MOHD. RAGHIB OMID PAKSIMA TABISH IFTEKHAR

PRESENTATION

ON

1. INTRODUCTION2. NECESSITY 3. TECHNIQUES

STROKS STRIPLING TEXTURE SCIOGRAPHY

4. CONCLUSION

INDEX

DEFINITION- This plaster is a textured plaster done in two layers in panels with grooves as per pattern with different type of stone chipping 10 mm. nominal size. Min thickness is 30mm.

COMPOSITION – ( 1 cement : 0.5 coarse sand : 2 stone chipping (10 MM nominal size. )

Stones- Dholpur & Kotastone.

TYPES OF GRIT PLASTER- Depend upon types of stone chips.

PROPERTIES-

MOISTURE RESISTANCE - High DURABILITY - High durability TERMITE RESISTANT - Good ENVIRONMENTAL HAZARDS- Good FINISHING RESULTS - Good

Textured Finish

GRIT FINISH PLASTER

APPLICATIONS-

PROCEDURE OF APPLICATION-

1st LAYER- 12 mm cement plaster in 1: 4 Ratio.

2nd LAYER- 1:0.5: 2 ( 1 cement : 0.5 coarse sand : 2 stone chipping

(10 MM nominal size. ) Stones- Dholpur & Kotastone.

USES-

ARCHITECTURAL- Exterior finish of buildings.Residential, Commercial building,Intuitional buildings

NON-ARCHITECTURAL-Landscape Elements

Like feature wall boundary wall,

Pathways. BEST SUITED FOR- Public Buildings.

RATES -

Grit Plaster -270 RS./ sqm. Groove -20.50Rs/Run m.

ADVANTAGES- Requires Low maintenance. acoustical absorption

DISADVANTAGES- It cant be use in interior because of texture finish.

DEFINITION- Brickwork is masonry produced by a bricklayer, using bricks tile and mortar. Typically, rows of bricks in courses are laid one on top of another.

COMPOSITION – Brick tile230mmx115mmx40 mm ) Cement mortar – (1:3-1:5)

PATTERN IN BRICK TILE – English bond, Flemish Bond , other Patterns.

PROPERTIES-

MOISTURE RESISTANCE - Good DURABILITY - High durability TERMITE RESISTANT - Good ENVIRONMENTAL HAZARDS - Moderate Resistant

FINISHING RESULTS - Good reddish brown Texture Finish

BRICK TILE CLADDING

115

230

40

APPLICATIONS-

PROCEDURE OF APPLICATION-

1st LAYER- 10 mm base cement plaster in 1: 3-1:4 Ratio.

2nd LAYER-Queen closer of Brick tile (230mmx57.5mmx40mm)

USES-

ARCHITECTURAL- Exterior finish of buildings.

Residential, Commercial building,Intuitional buildings.

NON-ARCHITECTURAL-Landscape Elements

Like feature wall boundary wall,

Pathways. BEST SUITED FOR- Public Buildings in

plain areas.

57.5

230 40

RATES -

Brick tile cladding -320 RS./ sqm..

ADVANTAGES- Requires Low maintenance. acoustical absorption

DISADVANTAGES- It is not good in interior because of texture finish.

DEFINITION- Stone cladding is a thin layer of stone or simulated stone applied to a surface of building.

TYPES OF STONES–

STONE

NATURAL STONE

SAND STONE , LIME STONE,

GRANITE,QUARTZITE

MANUFACTURED STONE

MARBLE ,MOSAIC,

POLISHED STONE,FCD STONE,

SAND BLASTED STONE

STONE CLADDING

PROPERTIES-

MOISTURE RESISTANCE - Good DURABILITY - High durability TERMITE RESISTANT - High ENVIRONMENTAL HAZARDS - High Resistant FINISHING RESULTS - Smooth &

textured as/ stone

APPLICATIONS-

PROCEDURE OF APPLICATION-

1st LAYER- 10 mm base cement plaster in 1: 3-1:4 Ratio.

2nd LAYER- Stone panel as/ Spcs. USES-

ARCHITECTURAL- Exterior & interior finish of buildings.

Residential, Commercial building,Instuitional buildings.

NON-ARCHITECTURAL-Landscape Elements Like feature

wall boundary wall, bird bath

Pathways & fire place.

BEST SUITED FOR- interior & exterior both

RATES -

Rough stone -320 RS./ sqm. Local stone - Polished stone -

ADVANTAGES- Requires Low maintenance. Easy to clean. Good appearance. Cheap in hilly areas.

DISADVANTAGES- costly in Plain areas ,