Download - Greenbuild 2007 Fulmer
-
8/14/2019 Greenbuild 2007 Fulmer
1/5
John Fulmer
East Mill Street Studio
313 Hardwick Place
Joppa, Md. 21085
410.510.7513814.512.1482 cell
814.975.1144 fax
Greenbuild 2007
If the throng of people who assembled at Greenbuild 2007 is any indication, sustainable
building is no longer a niche market or practice.
Attendees were met with a long, disorganized registration process, but the overflow crowd for
the convention, sponsored by the U.S Green Building Council (USGBC) and held in Chicagos
McCormick Place from Nov. 7-9, only helped solidify the notion that the green movement is now
mainstream. Organizers expected 20,000 and seemed totally unprepared for the 22,835 who
showed up.
Initiated in 2002, in Austin, Texas with a crowd of just 4,000, Greenbuild once largely
showcased regional vendors and contractors, but the 2007 convention featured heavy-hitting
multinationals such as Dow, DuPont and Siemens and huge contractors such as Skanska and
Whiting-Turner. The trade-show floor offered 850 booths with exhibits as diverse as soy-based
adhesives, airplane-tire based rubber floor coverings, composting toilets, energy-efficient lighting
and building controls, roof gardens, and an entire area devoted to Forest Stewardship Council
(FSC) wood products.
An eclectic mix of conventioneers, somewhat unusual for a trade show, was on hand.
Students and scruffy-looking 20-somethings, no doubt drawn to the convention by the siren of
idealism, rubbed shoulders with well-dressed, high-profile architects and their geekier
counterparts in facility management, building commissioning, contracting and engineering. Bill
Clinton, jokingly referred to as Al Gores president, handled the keynote address, giving the
convention an extra-high-profile sheen.
-
8/14/2019 Greenbuild 2007 Fulmer
2/5
All new constructionall of itshould be green, said Clinton, adding that a green
economy is the biggest opportunity to create broad-based prosperity since World War II. In 18
months well be racing to see who can make the most energy positive buildings.
Just about every veteran trade show attendee spoke about the unusual energy and enthusiasm
at Greenbuild and the heavy traffic at the booths. Even the inconvenience at registration was
offset by the schmoozing while waiting in line, said Amy Cornelius, a project manager with Hugh
Lofting Timber Framing, a Kennett Square, Pa. specialty contractor. Cornelius, like many at
Greenbuild, is an Accredited Professional in USGBCs Leadership in Energy and Environmental
Design program or, in shorthand, a LEED AP.
I have a friend who came and hes starting a greenhedge fund so he was there looking for
companies to invest in, Cornelius said. He met so many people that he forgot that he had been
in line all of that time. So he and I both said the same thing, which was interesting. It wasnt that
it was so interesting to see what somebody is doing today, it was interesting to talk to them about
what they are going to do in four years.
Cornelius, a Greenbuild first-timer, was dismayed by the lack of representation by solar and
wind power companies, but was impressed overall by the variety of exhibitors, seminars and
programs. She called green building a web whose many strands can be scary for someone
putting together a sustainable-building project.
I actually put my name in to be on the (USGBC) board this year because I wanted to be able
to get to the little general contractors that are actually building all of the buildings, who are afraid
of thegreen stuff, she said. And I think that the Green Building Council recognizes that theres
a problem there. But they dont know how to deal with it either. They said, Go run some other
nonprofit then come back to us and well be able to put you on the board.
But I thought it was a terrific show, she said. It was a bunch of really smart people who
were very interested in learning as much as they could. Not because they had a specific project
-
8/14/2019 Greenbuild 2007 Fulmer
3/5
they might have one in the futurebut they had a specific interest in learning a lot and that was
refreshing. It made you really energized to go and learn more yourself and apply these things
yourself. You know, I think I wrote twelve business plans while I was there.
Chris Bailey, particleboard sales manager with The Collins Co., a Portland, Ore., wood
products manufacturer, dealt with a steady stream of architects, engineers and other specifiers.
Collins also won a Top Ten product award at Greenbuild for its FreeForm particleboard,
advertised as the only FSC-certified particleboard in North America. The FreeForm spec sheet
lists its potential for LEED credits, such as recycled content and regional materials. For the
uninitiated, LEED rates sustainable-construction practices through a point system. Its a
comprehensive rating, and some means of gathering points, such as installing energy-efficient
lighting, seem logical. Others, such as awarding points for regional materials are more oblique
and arcane. But since FreeForm comes from sources close to the manufacturing facility, in this
case, within 500 miles, it means less fuel is required for its transport.
Bailey, who has missed just one Greenbuild, described the booth traffic as a group of
knowledgeable folks who wanted to know more than whether products were FSC certified, they
wanted how they were certified.
They wanted to know, Where is your wood source? In our case, it is all our own land, but
then they wanted to know about the company, he said. They want to know where youre
sourcing it. Were there other things your company was doing on the environmental front? It was
definitely more of a holistic kind of questioning than just product-specific questioning.
And I heard some people comment that they didnt want to buy products from a company
that made one item in a sustainable fashion just to meet the niche and everything else is made
with a business-as-usual, production-type approach, Bailey said. Definitely a deeper
questioning than you would normally get from a traditional crowd.
Jim Melillo, an account executive with Siemens Building Technologies, said his company,
which provides products for integrated building systems, among many other things, has had a
-
8/14/2019 Greenbuild 2007 Fulmer
4/5
booth at Greenbuild for two years. He met with engineers and some developers who were looking
to incorporate green building technologies into the existing buildings or finding out how to attain
LEED accreditations in new construction.
The people that were coming up to us were asking us what did we offer because they didnt
really understand how our energy conservation or our energy methods or design-build methods
would help their particular facility, said Melillo. Siemens, he added, also designs systems, which
was of particular interest to developers So what they wanted to know from us is how we can be
involved early from a design-build perspective where, if they brought us in early, helping design,
there is certain building-automation equipment to give them the energy needs that they need now
rather down the road after the building has been built.
Angela Schumacher, a performance assurance specialist with Siemens Energy Services
Group, dealt more with facility managers
Primarily, our focus was controls and building optimization, she said. A lot of the
feedback or a lot of the people who were at the conference were focusing on solar. That was one
of the biggest things that a lot of people talked about or were concerned about or interested in.
And building automation controls, obviously.
Her group biggest focus, she said is trying to implement the LEED certification into what we
do. She works on performance contracting (PC), a construction method that includes energy-
saving improvements within an existing budget by financing them with money saved through
future reduced utility costs.Truly understanding the overlap of what we do in PC to identify what would change in the
scope of work to, not only save them energy at a PC format, but to also make them eligible to
receive LEED certification, she said. If not right now, at least get them on the path to do that.
Identifying kind of where we fit in, implementing that into our PCs and our audits that we do
now, and kind of moving toward that.
She agreed Greenbuild was different type of show.
-
8/14/2019 Greenbuild 2007 Fulmer
5/5
Primarily just the energy, she said. I mean, no pun intended, but the energy of the people
there. There was a lot more excitement; people were a little bit more interested, not just by the
technology, but beyond that how it affected the environment.
And so being able to overlap things that would save them money in addition to those that are
more environmentally friendly, she said. There was a big cross between people were greenies
or environmentally aware to people who were, like Jim was saying, architects and engineers
looking for technology.
Rich Bienvenu, also a LEED-AP, works as a landscape architect for LPA Inc. in Irvine, Calif.
This was his first Greenbuild and the first time his firm had been represented at the convention.
Bienvenu said traffic was excellent. With two people in the booth there wasnt a time when
someone was idle. Bienvenu caught Clintons keynote speech, which he called realistic and also
one by environmental guru Thom Mayne, the 2005 Pritzker Architecture Prize Laureate, that
was very idealistic.
When you think about Clinton and Thom, Bienvenu said, and then you begin to see that
its not only an issue of conservationand, of course commerce has to be a big part of itbut its
really a moral issue. What kind of world are we going to leave for future generations?