Transcript
![Page 1: FORD FIESTA ST - BLOW OFF VAL - Boomba Racing FIESTA ST - BLOW OFF VALVE MANUAL... · FORD FIESTA ST BLOW OFF VALVE ADAPTOR 1 Remove plastic vacuum hose from rubber adaptor on the](https://reader034.vdocuments.us/reader034/viewer/2022052314/5bf8f01309d3f24c058b4c80/html5/thumbnails/1.jpg)
FORD FIESTA ST
BLOW OFF VALVE ADAPTOR
1
Remove plastic vacuum hose from rubberadaptor on the top of valve cover (leaverubber adaptor in place).1
When lifting the caralways use stands tosecure the car.
2Remove the right front wheel.
3
Disconnect the blow of valve wireharness.
4
Remove the factory blow of valve.
5
Wipe out oil residue from the bottom ofthe turbo housing.
6
Boomba Blow Off Valve Adaptor ready forinstallation.
7
Install the Boomba Blow Off ValveAdaptor with provided screws. Connectthe wire harness. 8
Reinstall the right front wheel.
MATERIALS REQUIRED
None
TOOLS REQUIRED
Set of car standsM5 long allen wrench