Download - Equilab EQR-100 Vibratory Disc Mill
EQR-100
Vibratory Disc Mill
EQR-100 Vibratory Disc Mill
• Quick• Simple• Safe• Noiseless• 5 working programs
• Obtain analytical grain size inseconds
• Easy to use
• 5 working programs
• Accepts a wide range of materials
• Quick change of milling jars
• Anti-vibration chamber
• Convenient display
• The best quality/price of themarket
The Vibratory Disc Mill is crushing unitspecially designed to obtain grain sizes from awide range of samples, such as glass, earth,slag, metallic oxides, ferroalloys, cements,ceramic elements, amongst other.It can quickly crush a great variety of differentmaterials, from semisoft materials to thehardest, fragile or fibrous.Its simplicity of use and sturdiness make ofthis it a practically maintenance free unit.
Controlled by a microprocessor, it has got five workingprograms, from where you can select several timesand milling speeds. When the milling jar is put in placewith the sample inside, and you close the door, simplyselect one of the programs and push start. The unitstarts up immediately and, when the programmed timehas elapsed, the mill will stop, allowing the door to opento take the milling jar.
The acoustic insulation lining the inside effectivelylowers the sound level of the mill during the millingprocess, avoiding thus exposing the user to noise.
The fixing system for the milling jars, as well as thesafety lock in the door preventing it from opening
until the engine has completely stopped, make ofthis mill a highly safe unit.Stable. The frequency converter in this unit, apartfrom allowing adjusting the speed of the engine tothe most adequate for each type of sample, lets youreach the working speed as well as pass to zerospeed via an acceleration or deceleration ramp, thisway avoiding that the unit vibrates in the starting andstopping process.
The crushing of the sample is made in the inside ofthe jar initially with the discs colliding into oneanother, and then with the friction between the discsand the walls of the jar. The milling times are reallyshort.
Aplicaciones:
Vidrios, tierras, escorias,carbón, clinquer, coque,
óxidos metálicos,ferroaleaciones, cemento,
materiales cerámicos,minerales, silicatos,
muestras geologicas ymineralógicas.
Normal milling time, app 1 Minuto.
Tecnical specifications:
Method: Friction, mixing and crushing_______________________________________________________________________________________________________________________________________________
Applications: Cement Industry, Metallurgical Industry, Thermal Stations,Environmental Laboratories, Material Recovery Plants,Recycling Plants, Geology and Mineralogy, Cerámic Industry.
_______________________________________________________________________________________________________________________________________________
Initial grain size*: < 15mm_______________________________________________________________________________________________________________________________________________
Final grain size*: < 40 μm_______________________________________________________________________________________________________________________________________________
Milling speed: Adjustable / 1500rpm_______________________________________________________________________________________________________________________________________________
Power engine: 750W_______________________________________________________________________________________________________________________________________________
Power source: 220V_______________________________________________________________________________________________________________________________________________
Milling jars: Steel 100mlSteel 200mlTungsten carbide 100mlTungsten carbide 200ml
_______________________________________________________________________________________________________________________________________________
Dimensions: 104cm (height) x 80cm (width) x 60cm (depth)Approximate weight: 250kg
* Depending on the material and milling program
Once the sample is inside the jar, we just need to establishthe milling time and the appropriate speed using the display.The mill has got five programs to adjust the milling time andspeed. It is specially designed to avoid vibrations.
A latching systemallows a quickjars replacement
Equilab, S.A.Avda. Camino de lo Cortao, 21 - Nave 628703 - San Sebastián de los Reyes - MadridTel.: 91 661 00 22 / Fax: 91 661 81 46www.equilab.esAtención al cliente: [email protected]
EQUILAB
© 2014 Equilab, S.A. All Rights Reserved
EQUILAB is a registered trademark of Equilab, S.A.