Download - Energy and Phases
![Page 1: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/1.jpg)
Energy and Phases
![Page 2: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/2.jpg)
Potential EnergyPotential Energy - stored energy - stored energy (stored in bonds, height)(stored in bonds, height)
Kinetic EnergyKinetic Energy - energy of motion, - energy of motion, associated with heatassociated with heat
![Page 3: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/3.jpg)
Forms of EnergyForms of Energy
Light - light waves, electromagnetic Light - light waves, electromagnetic radiationradiation
ElectricalElectrical ChemicalChemical HeatHeat Mechanical - moving parts, machinesMechanical - moving parts, machines Atomic/Nuclear - changes in mass of Atomic/Nuclear - changes in mass of
atomatom
![Page 4: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/4.jpg)
Conservation of Energy
Energy can be converted from one form to another but never destroyed.
The total amount of energy is always constant.
![Page 5: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/5.jpg)
Exothermic Reactions
• Energy (heat) exits• Releases energy (heat) when new products
are formed• Potential Energy of the reactants is greater
than the potential energy of the products• Surroundings feel warm because heat was
released• Heat is a product
Ex: AB A + B + heat
![Page 6: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/6.jpg)
Endothermic Reactions
• Endothermic – energy (heat) goes in• Reaction absorbs heat from the
environment• Potential energy of the reactants is less
than the potential energy of the products• Surroundings feel cold because heat was
absorbed from the surrounding• Heat is a reactant• Ex: A + B + heat AB
![Page 7: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/7.jpg)
Activation Energy
• The energy needed to break the bonds (to get the reaction started)
• Energy to get over the “hill”, difference between your starting point and the top of the hill
• All reactions need activation energy
![Page 8: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/8.jpg)
Heat of Reaction (H)
• Heat absorbed/released by a reactionH = Hp - HR
• If H is negative, Exothermic
• If H is positive, Endothermic
![Page 9: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/9.jpg)
Table I
1. Is the reaction, C(s) + O2(g) → CO2(g), exothermic or endothermic?
2. What is the value of ΔH for the reaction, CO2(g) → C(s) + O2(g)
![Page 10: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/10.jpg)
Catalyst
• Lowers the activation energy
• Speeds up the reaction
![Page 11: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/11.jpg)
Heat and Temperature
• Heat and temperature are not the same– Heat – measure of the energy transferred from one
substance to another– Temperature – measure of the average kinetic
energy of a substance’s particles
• The faster the particles move (more KE), the higher the temperature
• Heat flows from high to lower until an equilibrium is established (Hot Cold)
• Calorimeter – measures the heat given off by a reaction
![Page 12: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/12.jpg)
Heat/Temp Examples
1. If two systems at different temperatures have contact with each other, heat will flow from the system ata. 20oC to a system at 303Kb. 30oC to a system at 313Kc. 40oC to a system at 293Kd. 50oC to a system at 333K
2. Which is not a form of energy? a. Light b. Temperaturec. Heat d. Motion
3. Which has the most kinetic energy? a. 10.0 g of H2O at 70oC b. 10.0 g of H2O at 5oCc. 25.0 g of H2O at 60oC d. 25.0 g of H2O at 10oC
![Page 13: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/13.jpg)
Solids
• Definite shape• Definite volume• Very high attractive forces between
molecules• Neighboring particles are very
close together• Crystalline structure
![Page 14: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/14.jpg)
• Kinetic Energy – solids have KE– Particles are constantly vibrating
(around their positions in the crystal)
– Positions do not change in relation to the other particles in the crystal
– At absolute zero (O K) all movement stops (theoretically)
![Page 15: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/15.jpg)
Melting Point As energy is added to the solid, KE of the
particles increases until they have sufficient energy to overcome the forces holding them in the crystal, the substance begins to melt
Temperature where the solid and liquid phase exist in equilibrium
![Page 16: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/16.jpg)
Heat of Fusion Heat needed to melt Amount of heat needed to convert a unit mass
of a substance from a solid to liquid at a constant temperature
q = mHf
q = heat (J)m = mass (g)Hf = heat of fusion (J/g)Hf for water = 334 J/g
![Page 17: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/17.jpg)
Hf Examples
1. How much energy is needed to change 75g of ice at OoC to water at the same temperature?
2. 11,000J of heat are released as a sample of water at OoC freezes. Calculate the mass of the sample.
![Page 18: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/18.jpg)
Melting/Freezing Melting is an endothermic process, the H2O
absorbs 334J/g Freezing is the reverse process, so it is
exothermic, the H2O releases 334J/g
![Page 19: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/19.jpg)
Sublimation
• Solid phase gas phase (skip liquid)
• Endothermic
Example: dry ice CO2(s) CO2(g)
Iodine I2(s) I2(g)
Naphthalene (moth balls)
![Page 20: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/20.jpg)
Liquids
• Definite Volume• Take the shape of the
container• High attractive forces
between molecules (but not as high as those found in solids)
![Page 21: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/21.jpg)
Evaporation (Vaporization, Boiling)
• Change from liquid to gas, endothermic
• As temperature increase, rate of evaporation increases
• Increased temperature, more KE, easier to overcome intermolecular forces and to break them
• Condensation - change from gas to liquid, exothermic
![Page 22: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/22.jpg)
Vapor Pressure
• Pressure of a gas on a liquid• In a closed system (sealed container) the
vapor evaporating from the liquid exerts pressure on the liquid
• Vapor Pressure increases as the temperature of the liquid increases
• It has specific values for each substance at any given temperature
• Table H
![Page 23: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/23.jpg)
Boiling Point
• Temperature where vapor pressure = atmospheric pressure
• Water boils at 100oC at 101.3kPa (1atm)– Pressures below 101.3kPa (high elevations),
water boils below 100oC– Pressures greater than 101.3kPa (below sea
level), water boils above 100oC
![Page 24: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/24.jpg)
![Page 25: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/25.jpg)
Table H Examples
1. What is the vapor pressure of water at 105oC?
2. If the pressure is 30kPa, what temperature will water boil at?
3. What pressure is needed for ethanol to boil at 50oC?
4. Which liquid on Table H has the strongest intermolecular forces?
![Page 26: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/26.jpg)
Heat of Vaporization
• Heat to vaporize
• Amount of heat needed to convert a unit mass of a substance from liquid to vapor at a constant temperature
• Does not increase KE, so temperature does not change
![Page 27: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/27.jpg)
Heat of Vaporization
• q = mHv q = heat (J)
m = mass (g)
Hv = heat of vaporization
Hv for water = 2260 J/g
Examples:
1. How much heat must be supplied to evaporate 50.g of H2O at 100oC?
2. 12,750 J of heat are used to boil a sample of water. Calculate the mass of the sample.
![Page 28: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/28.jpg)
Boiling and Condensation
• Boiling is an endothermic process, the H2O absorbs 2260J/g
• Condensation is the reverse process, so it is exothermic, the H2O releases 2260J/g
![Page 29: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/29.jpg)
Deposition
• Reverse of sublimation
• Direct change from the gas to the solid phase, skip liquid
• Exothermic
• Example: Frost
![Page 30: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/30.jpg)
Phase Diagrams / Heating and Cooling Curves
• When a sample of matter is heated its temperature usually increases.
Increase in KE causes an increase in temp.
• Sometimes matter can gain or lose heat without changing temperature.
What is going on at this point?
![Page 31: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/31.jpg)
Points to remember:
• When heat is used to increase the speed of particles, the temperature increases – at this point the KE is changing
• When heat does not cause a change in temperature, it is being used to change phases (phase changes occur at the flat parts of the graph) – at this point PE is changing
• Melting Point - point when the solid begins to melt, both the solid and liquid phases are present
• Boiling Point - point when the liquid begins to boil, both the liquid and gas phases are present
![Page 32: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/32.jpg)
Rate of Heating
• Total amount of heat absorbed = time x rate of heating
q= t x rate
Example:
A solid is heated at a constant rate of 150 J/min for 3 minutes. How much heat is absorbed?
![Page 33: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/33.jpg)
Heating Curve
![Page 34: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/34.jpg)
Cooling Curve
![Page 35: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/35.jpg)
Change in Temperature Calcs
• q = mcT
• q = heat (Joules)
• m = mass
• C = specific heat capacity
(for water; c = 4.18 J/goC)T = change in temperature
![Page 36: Energy and Phases](https://reader030.vdocuments.us/reader030/viewer/2022033104/56813946550346895da0e132/html5/thumbnails/36.jpg)
Examples
1. How many joules does it take to raise the temperature of a 5.0g sample of water by 20.oC?
2. A 1000. gram mass of water in a calorimeter has its temperature raised 5.0oC. How much heat energy was transferred to the water?