Download - Electronic Products August 2013
-
electronicproducts.comA Hearst Business Publication
AUGUST 2013
Also In This ISSUE:Flash Memory Summit preview
UFS The next generation of embedded storage
Smarter, slimmer power supplies
-
Best performance in a leading role.
Histogram for a statistical viewTrend chart to see trends over time
Introducing the much-anticipated Agilent Digital Multimeters with Truevolt technology.All have a large display and revolutionary interface. And only Agilent Truevolt DMMs let you measure with unquestioned Truevolt confi dence and display results as youve never seen before. Plus you can advance to the next level 34401A DMM with 100% assurance. For metrology-level performance and unequaled measurement integrity, its easy to see why these DMMs are winning fans everywhere.
Agilent and our Distributor NetworkRight Instrument. Right Expertise. Delivered Right Now.
Free DMM software to capture and view data anywhere with a single click www.alliedelec.com/lp/agilentdmms/800-433-5700 www.alliedelec.com/agilent
Agilent 34461A 6 digit Truevolt DMM
Agilent Technologies, Inc. 2013
-
Accelerating Your Success!1 800 332 8638 | www.avnetexpress.com | @avnetdesignwire
TAilored.AvneT SoluTionS MeeT Your unique needS
From big to small we do it all.
Even big products begin small, with millions of sizes in between. We see them all. Here at Avnet, no order is too small. Avnet provides products and services to match your needs. No matter the location; whether you are in the new product introduction phase or extending a products life. If you need design support, or supply chain assistance were here to help. With Avnet, you determine the scale of interaction or complexity and we will support you every step of the way, so its a perfect fit!
What can we do for you? www.avnetexpress.com
-
Electronic Products Magazine (USPS 539490) (ISSN 0013-4953)Published monthly by Hearst Business Communications Inc./UTP Division, 50 Charles Lindbergh Blvd., Suite 100, Uniondale, NY 11553. Periodicals postage paid Garden City, NY and additional mailing offices. Electronic Products is distributed at no charge to qualified persons actively engaged in the authorization, recommenda-tion or specification of electronic components, instruments, materials, systems and subsystems. The publisher reserves the right to reject any subscription on the basis of information submitted in order to comply with audit regulations. Paid subscriptions available: U.S. subscriber rate $65 per year, 2 years $110. Single issue, $6.00. Information contained herein is subject to change without notice. No responsibility is assumed by the publisher for its accuracy or completeness.
Postmaster: Send address changes to Electronic Products, PO Box 3012, Northbrook, Il 60065-3012. Phone 847-559-73172013 by Hearst Business Communications Inc./UTP Division. ALL RIGHTS RESERVEDPublications Mail Agreement Number 40012807. Return Undeliverable Canadian Addresses to: Station A PO Box 12, Windsor, ON N9A 6J5
4 Contents
AUGUST 2013 electronicproducts.com ELECTRONIC PRODUCTS
Features19 Digital ICs:UFS The next generation of embedded storage
Universal Flash Storage is set to improve embedded system performance
24 Energy-Saving Initiative Series:Semiconductor advances make smarter, slimmer power suppliesAs equipment becomes smarter, maximizing energy efficiency and usage modes, power supplies can also act smarter by using the latest power semiconductor innovations
Vol. 56, No.3 August 2013
Cover Story28 HCC ultrasound advances diagnostic clinical
proceduresCutting-edge ultrasound re-search requires a high-channel-count (HCC) system that can interface to large matrix arrays
Touch Points6 Viewpoint: Undercover medical research
8 The Story Behind the Story: Dc/dc converters with more functionality, flexibility, power
11 Outlook (Technology News): Flash Memory Summit 2013 Santa Clara Next-gen LED shows new promise
22 Product Trends: Transportation electronics
34 Product Roundup: Sensors and transducers
38 Product Update: Packaging, cabinets, and enclosures
New Products41 Power Sources 45 Packaging & Interconnections43 Components & Subassemblies 46 Optoelectronics44 Test & Measurement 47 Integrated Circuits
34
11
19
Only OnlineElectronicproducts.com
Education Center:
How to turn a window, table top, and TV screen into a touchscreen device
First exoskeleton robot to mimic human motions
3D-printing artificial bone and nacre
Massive rocket explosion due to technician putting sensors in upside down
Keller Rinaudo talks about his new soft-ware which turns iPhones into personal robots
Throwable camera captures sharp, aerial photos and video that dont induce motion sickness
Handibot: A 3D milling and carpentry robot that does the work for you
Whats It Worth: Early Digital Meters and Displays
Cove
r Im
ages
: Dig
ital i
mag
ery
by D
on W
ilber
.
-
AUGUST 2013 electronicproducts.com ElEcTronic ProdUcTS
6 Viewpoint
Undercover medical research
No one can say I don't put 100% of myself into my work. In preparing for this, our annual Medical Technology issue, I actually developed cholelithiasis (gall stones) and, for the first time since I was born, was admitted to a hospi-tal Long Island College Hospital, a part of SUNY Downstate Medical Center for an operation.
From the emergency room, I was quickly transported to radiology where I expected I would be given some sort of X ray or MRI. Imagine my surprise, when I was wheeled up next to an ultrasonography machine. I explained to the technician that I was fairly certain I was not pregnant, which is the only instance I knew of from prior experience in which ultrasound was used. But sure enough, when she applied the wand to my torso, there was a gall stone about the size of a golf ball nicely lodged in my gallbladder.
The ultrasound specialist explained to me that diagnostic ul-trasonography is being used today as an imaging technique for looking at all sorts of internal body structures: muscles, joints, internal organs, and so on. Not only is ultrasound being used for diagnosis, it is also being used theraputically, bringing heat or vibration to bear. Hence it can be used to clean teeth, treat cysts or tumors, break up kidney stones, and remove cataracts.
As the feature article on page28 by Danny Kreindler, Cephasonics' Senior Director of Technical Marketing and FAE,
explains, ultrasound's potential for medical applications is now being widely explored at research institutions, particularly using multichannel ultrasound. As he says, "Ultrasound is the modality of choice due to more and better data throughput, higher-resolution imaging, decreasing cost, and less patient risk." A few of the areas being explored are the use of 2D arrays of ultrasound sensors to create highly detailed 3D images, a less painful alternative to mammography, and remote diagnosis.
Thanks to such technologies and MEMS and wireless communications, sensors are playing an ever-increasing role in medicine and healthcare. In the on-line issue, you'll find articles by Freescale Semiconductor, Renesas, and Microchip Technol-ogythat give particular examples of how those technologies are changing the face of medicine.
But after spending a week in the hospital, the thing for which I was most gratefulwas the attention of the doctors, nurses, and orderlies who made my stay more comfortable and pleasant than I had reason to expect. On leaving, I jokingly told the staff that I planned to spend my next vacation there. The more technology can do to make it possible for patients to receive the type of individual attention I did, the more it will truly benefit all of us.
Richard Comerford To comment: http://bit.ly/15L10ew
-
The widest selection of the newest products.Over 4 million products from over 500 manufacturers.
Authorized distributor of semiconductorsand electronic components for design engineers.
Mouser and Mouser Electronics are registered trademarks of Mouser Electronics, Inc. Other products, logos, and company names mentioned herein, may be trademarks of their respective owners.
The Newest Products for Your Newest Designs
www.mouser.com
-
8 Story Behind the Story
AUGUST 2013 electronicproducts.com ELECTRONIC PRODUCTS
A look at the making of POY award winnersElectronic PRODUCTS
EDITORIAL STAFF 516-227-1300 FAX: 516-227-1901
Content Operations Director Bryan DeLuca516-227-1379 [email protected]
Managing Editor John Filippelli516-227-1381 [email protected]
Senior Editor Paul OShea941-359-8684 [email protected]
Technical Editor Jim Harrison415-456-1404 [email protected]
Editor Richard Comerford516-227-1433 [email protected]
Contributing Editors Michael KawaSteve Evanczuk
Chief Copy Editor Leonard Schiefer
Online Researcher and Editor Jeffrey Bausch
Associate Editor Nicolette Emmino
Editorial Assistants/Interns Nicole DiGioseMax Teodorescu
Yolanda SutherlandDaniella Garrisi
Emily Bahr
Art Director Don Wilber
Artist Estelle Zagaria
Group Production Manager Thomas Young
Client Services Account Managers Amy FischeriMarisa Giordano
Client Services Assistant Account ManagerKellyAnne Zarcone
Audience Development Director Carolyn Giroux
Subscriber Service 1-866-813-3752
Group Publisher Steve CholasElectronics Group
Director of Online Sales Robert McIntoshand Operations
Published by Hearst Business Communications, Inc.
UTP DivisionA Unit of The Hearst Corporation
50 Charles Lindbergh Blvd., Suite 100 Uniondale, NY 11553
TEL: (516) 227-1300 FAX: (516) 227-1901
Robert D. WilbanksTreasurer
Catherine BostronSecretary
William BarronVice President, Publishing Director,
Electronics Group
Adriana MarzovillaBusiness Manager
THE HEARST CORPORATION
Steven R. SwartzPresident & Chief Executive Officer
William R. Hearst, IIIChairman
Frank A. Bennack, Jr.Executive Vice Chairman
HEARST BUSINESS MEDIARichard P. Malloch
President & Group Head
Robert D. WilbanksGroup Controller
The Ericsson BM456/457 dc/dc converters are the first models in the second genera-tion of digital Advanced Bus Converter (ABC) products. They target information and communication technology (ICT) companies that need more advanced functionality and higher levels of flexibility from board-mounted power source manufacturers. To achieve this, designers are now combining at the board level a number of power units that integrate PMBus interfaces, such as power interface modules, ABCs, and PoL regu-lators. In addition, the datacom industry, working on an ac-source and converting via narrow-output voltage rectifiers to 48 or 52 V, require an increased level of output power per quarter-brick module, provided by these Ericsson products.
e company used a small core design team that was supported by dedicated re-sources from di erent design units including thermal simulation and veri cation to develop the dc/dc converters. eir biggest challenge was developing a new product at the same time as a new control IC plus rmware. When they were developing the rst ABC platform called FRIDA I and integrated digital control and power management, the company explored new ways to optimize energy utilization and make it possible for system architects to increase the integration of dc/dc converters within the rest of the digital chain. Working in close cooperation with silicon vendors,Ericsson achieved the de-velopment of such a product, but also faced an immediate demand for more advanced features and an increased level of power required by the datacom industry.
Increasing the level of functionality and making the power module even more e cient meant that the R&D team had to signi cantly increase the level of embedded so ware ( rmware) while also increasing the number of commands executed by the processor. As there was no suitable control IC available, they had to work in close cooperation with silicon vendors to develop the new control IC for the second-generation FRIDA II, in parallel with developing the product.
In addition to the complexity of developing a new platform at the same time as the con-trol IC, there was an additional level of complexity with the development of new algorithms to optimize the built-in power management. Very few so ware designers combine pow-er-switching expertise with knowledge of developing complex program algorithms.
e development of the rmware requiredthe teamto take a step-by-step approach and develop a process for design, veri cation, and validation, and nally function-by-function implementation. In the development of this new process, the most di cult part was to bal-ance functionality with processing power. e switching cycle and timing events, combined with analog delays and sampling limitations, called not only for accuracy, but also thorough veri cations and quality checks.
e result of this process was the Ericsson Energy Optimizer Firmware, which optimiz-es operational parameters to any type of load or line transients such in the case of ATCA switching from Feed A to Feed B.
is type of complex project normally takes about 36 months. However, due to the exper-tise gained from the rst-generation FRIDA I, by combining the development of so ware and rmware in a single core team, together with the companys knowledgeof energy management and dedicated algorithms,creating theBM456/457 dc/dc converterstook only 18 months.
Paul OShea
Dc/dc converters with more functionality, flexibility, power
Core members of the BM456/457 design team (le to right): Henrik Borgengren, Anders Kullman, Fredrik Wahledow, Jonas Malmberg, and Jan Arvidsson.
-
Sense-ability.
Newark element14 makes it easy to fi nd all of your sensors and transducers fast. newark.com
-
WWW.COILCRAFT.COM
Our web tools help you quickly pick the perfect inductor.Then get free samples overnight!
We make picking inductors fast, easy, and almost fun! Start with a quick para-metric search for parts that meet your specs. (We even show you volume pricing.) Click to instantly compare core and winding losses for multiple inductors. Want to see actual L and I
curves at a specifi c tempera-ture? Theres a tool for that! When youve picked your inductors, just click to get free samples. Do it by 5:00 p.m. CST and theyll ship to you the same day! See how fast you can go from search to samples. Visit coilcraft.com/tools
From Search to Samples in Seconds
-
Outlook 11Innovations impacting product, technology and applications
ELECTRONIC PRODUCTS electronicproducts.com AUGUST 2013
Maximum capacitance values up to 10,000 F
Low inductance, low ESR and ESL with low DF
Voltages to 10,000 VDC, ripple currents up to 400 Arms, 150C operation
Ideal for renewable energy power converters, off-highway vehicle traction control, electric vehicle battery chargers and many others
film & dc linkpower
EMI Filters EMI Filtered Connectors Advanced Ceramics Power Filters & Capacitors Magnetics
Download our NEW
datasheet
Power Film Capacitors
API Technologies Spectrum Control has developed a new line of power film capacitors designed using the latestfilm technology to achieve maximum capacitance density. Available in application-specific packages and terminations,these new power film capacitors feature rugged constructionto withstand even the harshest environments.
Features and Specifications Metallized: polyester, polypropylene and polyphenylene sulphide film dielectrics
Temperature ratings -55C up to +150C
Low ESR and ESL construction
Rugged construction for even the harshest environments
In-house electrical, environmental and reliability testing verification
Standard designs up to 10,000 VDC/ 750 VAC
Standard capacitance values up to 10,000 F
Ripple currents up to 400 Arms
Applications Renewable energy inverters solar converters, wind turbines and fuel cells
Electric vehicle power conversion and battery chargers
Aircraft power conversion systems
Radar systems, laser pulse power
Industrial welders, elevators, rail traction drives
High voltage power supplies, switching power supplies
Medical imaging equipment, defibrillators
Model Features & Ordering Information Example: 55PP-600-153-K
55HV 10K 103 M
Voltage Code
10K = 10,000 VDC
High VoltageCapacitor Series
Capacitance Code*
103 = 0.01 F
Tolerance**
M = 20%
High Voltage Capacitor Series Metallized polyester
Flame retardant tape wrap and epoxy end fill
Temperature -55C to +125C
Voltages up to 10,000 VDC
55PP 600 153 K
Voltage Code
600 = 600 VDC
Power PolypropyleneCapacitor Series
Capacitance Code*
153 = 0.015 F
Tolerance**
K = 10%
High Power Capacitor Series Metalized polypropylene, low loss
Flame retardant tape wrap and epoxy end fill
Axial leads or tab termination
Low ESL & ESR design for high ripple currents
Temperature -55C to +105C
Voltages up to 2,000 VDC
Capacitance 0.015 F to 3.3 F
* Capacitance in Picofarads. The first two digits are significant and the third represents the number of zeros.
** Indicates standard tolerance. Others available upon request.
For complete specs and drawings, visit eis.apitech.com/film
High performance in rugged, Hi-Rel packages
Call 888.267.1195 orvisit eis.apitech.com/film
capacitors
EMC (www.emc.com) will have on handits XtremSF PCIe flash hardware that is deployed in servers to dramatically improve application performance by reducing latency and acceler-ating throughput. XtremSF can also be used in conjunction with server flash caching software from EMC for accelerated read performance with data protection.
HGST (www.hgst.com) will be at booth 606 demonstrating new 12-Gbit/s SAS SSDs that have high performance, three endur-ance-level options, capacity up to 1 Tbyte, and proven reliability. The companies Ultrastar SLC and MLC drives fit the enterprise where it is critical that they integrate seamlessly in tiered storage environments.
PNY (www3.pny.com) will talk to you in booth 414 aboutthe company'sendurance promise that offers peace of mind for solid-state drives with up to 10k program/erase cycles, so you can easily choose the right drive based on your needs. They feature capacities up to 480 Gbytes and performance up to 550 Mbytes/s.
Viking Technology (www.vikingtechnology.com) will show you its ArxCis-NV nonvolatile DDR3 DIMM memory in booth 508. It
Starting Monday August 12, at its regular spot in the Santa Clara Convention Center, the Flash Memory Summit and Exhibition will again bring together just about anybody who has knowledge and interest innonvolatile memory. Monday is reserved for four in-depth seminars, followed by a reception from 5:30 to 7 p.m. The regular conference starts Tuesday with a full gaggle of 1-hour talks that continue until 6 p.m. on Thursday. There will be11 half-hour keynote presentations given during the three conference days.
The exhibit floor is open on Wednesday (noon to 2 and 5 to 7:30 p.m.) and Thursday (noon to 2 p.m.). Here are just a few of the many interesting products being shown on the exhibit floor:
LSI Sandforce (www.lsi.com), in booth 402, will show you a new SSD NAND flash controller delivering the endurance, reli-ability, and performance customers require, even as flash memory geometries shrink.
PMC (http://pmcs.com), a leading provider of enterprise storage system solutions for networked and server storage applications, will showcase 12-Gbit/s SAS and PCIe Gen 3 solutions. They will be happy to explain how NAND vendors and storage OEMs can design managed enterprise flash solutions using off-the-shelf MLC and SLC NAND devices.
Flash Memory Summit 2013 Santa ClaraKey nonvolatile storage conference expects 4,000 attendees
-
12 OutlookInnovations impacting product, technology and applications
AUGUST 2013 electronicproducts.com ELECTRONIC PRODUCTS
Next-gen LED shows new promiseResearchers from the Smart Lighting Engineering Research Center at Rensselaer Polytechnic Institute (RPI) have success-fully integrated an LED and a power transistor on the same gal-lium nitride (GaN) chip. This innovation could open the door to a new generation of LED technology that is less expensive to manufacture, significantly more efficient, and one that enables new functionalities and applications beyond illumination.
At the heart of these LED lighting systems are chips made from GaN. For the LED to function, many external compo-nents such as inductors, capacitors, silicon interconnects, and wires must be installed on or integrated into the chip. The large size of the chip, with all of these necessary com-ponents, compli-cates the design and performance of LED lighting products. Additionally, the process of assembling these complex LED lighting systems can
Fig. 1: A cross-section of the new monolithically integrated GaN LED and HEMT developed by engineers at Rensselaer.DATA MODUL Inc.
275 Marcus Blvd | Unit K Hauppage | NY 11788 - USA | Phone: +1-631-951-0800 | www.data-modul.com
THE ONE STOP SUPPLIER FOR ALL YOUR DISPLAY, TOUCH AND EMBEDDED REQUIREMENTS!
Contact us with any of your display, touch or embedded re-quirements on +1-631-951-0800 / [email protected]
EMBEDDED
TFT, LCD AND OLED DISPLAYS
TOUCH SCREENS
TO U C H
With in-house design and manufacturing facilities, DATA MODUL can meet all your requirements for design, integration or kit supply.
- Qseven, COM Express, 3.5, EPIC, Nano-ITX and Mini-ITX - based on Intel i-Core and AMD Embedded G-Series - Adaptation and integration of all available displays
- ARM Modules up to Quadcore Cortex A9
- Intel Atom platforms
E M B E D D E D
runs at DDR3 speeds, delivers both performance and reliability to enterprise applications, and is integrated
into standard server and storage architecture at the fastest storage tier. ArxCis-NV also
features practically infinite write endurance.Seagate Technology (www.seagate.com) will have three 2.5-in.
SSDs. The 600 SSD is the ultimate SSD to speed up existing laptops with SATA 6 Gbits/s and up to 480-Gbyte capacity. The 600 Pro SSD is an entry-level enterprise SATA 6-Gbit/s drive with up to 480-Gbyte capacity. And, the 1200 SSD enterprise 12-Gbit/s SAS SSD has capacities up to 800 Gbytes.
Silicon Motion Technology (www.siliconmotion.com) will demonstrate their SM2246 SATA 6-Gbit/s controller in booth 615. It targets PC/ultrabook and tablet applications, with ultra-low power consumption and support for the Toggle/ONFI 3.0/Async interface.
Skyera (www.skyera.com) has leveraged experience in ad-vanced networking and chip design to build skyHawk, a vertically integrated hardware and software solution that combines a pur-pose-built flash storage array and a rich feature set of software tools.
Jim Harrison
-
Not Your Dads LDO
Info & Free Samples
, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners.
www.linear.com/products/LDOs
1-800-4-LINEAR
Selected LDOs
Current Reference-BasedNPN Positive LDOs
Positive LDOs
Dual Positive LDOs
Dual Positive and Negative LDOs
Negative LDOs
OutputCurrent (A)
PartNumberProduct Category
LT3082
LT3085
LT3080
LT3083
LT3008
LT3050
LT3013
LT3022
LT3070
LT3029
LT3032
LT3015
0.2
0.5
1.1
3
0.02
0.1
0.25
1.0
5
0.5 x 2
0.15 x 2
1.5
VIN Range (V)
1.2 to 40
1.2 to 36
1.2 to 36
1.2 to 23
2 to 45
2 to 45
4 to 80
0.95 to 10
0.95 to 3
1.9 to 20
1.9 to 20
1.9 to 30
Output Voltage (V)
Adj (0 to 38.5)
Adj (0 to 35.5)
Adj (0 to 35.5)
Adj (0 to 22.5)
Adj (0.6 to 44.5), Fixed
Adj (0.6 to 44.5), Fixed
Adj (1.24 to 60)
Adj (0.2 to 9.5), Fixed
Adj (0.8 to 1.8)
Adj (1.215 to 19.5)
Adj (1.22 to 19.5), 5
Adj (1.22 to 29.5), Fixed
-
14 OutlookInnovations impacting product, technology and applications
AUGUST 2013 electronicproducts.com ELECTRONIC PRODUCTS
Fig. 2: Researchers from Smart Lighting Engineering Research Center at RPI have integrated an LED and HEMT structure on the same GaN chip. The device is seen on the left with the LED on the right.
be slow, manually intensive, and expensive.The study, done by a research team led by T. Paul Chow, professor in the
Department of Electrical, Computer, and Systems Engineering (ECSE) at RPI, sought to solve the challenge by developing a chip with components all made from GaN. This type of monolithically integrated chip simplifies LED device manufacturing, with fewer assembly steps and less required auto-mation. Additionally, the LED devices made with monolithically integrated chips will have fewer parts to malfunction, higher energy efficiency and cost
effectiveness, and greater lighting design flexibility.
Chow and the research team grew a GaN LED structure directly on top of a GaN high-electron-mobility transistor (HEMT) structure. They used several basic techniques to interconnect the two regions, creating what they are calling the first monolithic integration of a HEMT and an LED on the same GaN-based chip. The device, grown on a sapphire substrate, demonstrated light output and light density comparable to standard GaN LED devices. Chow said the study is an important step toward the creation of a new class of optoelectronic device called a light emitting integrated circuit (LEIC).
The LEIC will play a pivotal role in cost-effective monolithic integration of electronics and LED technology for new smart lighting applications and more efficient LED lighting systems, according to Mr. Chow.
This new study, and the device we have created, is just the tip of the ice-berg, said Smart Lighting ERC Director Robert Karlicek, a co-author of the study and ECSE professor at Rensselaer. LEICs will result in even higher energy efficiency of LED lighting systems. But what will be even more exciting are the new devices, new applications, and new breakthroughs enabled by LEICsthey will truly usher in the era of smart lighting.
Visit http://tinyurl.com/qhfkeh3 for additional information.
Paul OShea
-
800 453 6202
>> Accelerate your productivity at ni.com/measurements-platform
2013 National Instruments. All rights reserved. LabVIEW, National Instruments, NI, ni.com, and NI CompactDAQ are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies. 12123
NI data acquisition products are the most trusted computer-based measurement
devices available, offering superior accuracy and maximum performance.
NI CompactDAQ systems feature more than 50 measurement-specifi c modules and
complete breadth and depth of I/O. Coupled with the analysis and signal processing
capabilities of NI LabVIEW software, this platform puts the power of graphical system
design at your command so you can build any measurement system faster.
The Trusted Leader for Any Measurement
LabVIEW offers powerful analysis functions for sensor and signal data, simplifi es GUI development, and helpsyou program the way you thinkgraphically.
-
16 Engineering Distribution
AUGUST 2013 electronicproducts.com ELECTRONIC PRODUCTS
IN PARTNERSHIP WITH
Medical ApplicationsMagnetic Resonance Imaging (MRI)
AD
VE
RT
ISE
ME
NT
Magnetic Resonance Imaging: Some Key Components
As noted on the opposite page, magnetic resonance imaging (MRI) is a non-invasive diagnostic technology for taking very clear and detailed pictures of tissues and internal organs using high-frequency radio waves delivered in pulses and a strong magnetic field. The magnetic field forces hydrogen atoms in the body into a particular alignment (resonance). Radio frequency energy is then distributed over the patient, which is disrupted by body tissue. The disruptions correspond to varying return signals that, when processed, create the image. In this article we'll look at the role played by three product types used in the signal path whose accurate processing of MRI signals is essential to obtaining high-quality images: DACs, DSPs, and power amplifiers.
Given adequate support circuitry, component selection and proper layout, higher DAC precision produces sharper MRI image resolution. For controlling the magnetic and RF energy in an MRI, high-resolution, high-speed DACs are needed. High resolution is required to accurately define the area of the patient to be scanned. High-speed is necessary where the signals for the predominant 1.5- and 3-Tesla systems are approximately 64 and 128 MHz.
Fortunately, advances in semiconductor processing, DAC architecture, and fast on-chip calibration techniques make possible highly linear, stable, fast-settling DACs which provide controllable precision voltages. The Analog Devices AD5791 (Fig. 1), for example, is a single, 20-bit, serial input, 1-ppm-accurate voltage output DAC that operates from a bipolar supply of up to 33 V. Besides its impressive linearity, the AD5791 combines a low 0.05-ppm/C temperature drift, 1-s settling time, 0.6-Vp-p noise in the 0.1 to 10-Hz frequency band and better-than-1-ppm long-term stability. Analog Devices also offers its EVAL-AD5791, a full-featured evaluation board designed to allow the user to easily evaluate all features of the AD5791 voltage-output 20-bit DAC.
Accurate signal processing is essential to obtaining high-quality MRI images. DSPs can be used to properly control the magnets in the MRI system. A DSP can also take care of preprocessing the signal before it reaches the image reconstruction engine. The TI TMS320C6672 DSP (Fig. 2) is the highest-performance fixed/floating-point DSP based on TI's KeyStone multi-core architecture. Incorporating the C66x DSP core, this device can run at a core speed of up to 1.5 GHz. TI's TMS320C6672 DSP combines both fixed and floating point performance, an increased number of peripherals and memory per core, offers 3-GHz cumulative DSP and is fully backward compatible with TI's existing C6000 family of DSPs. The C6672 device has a complete set of development tools, which include an enhanced C compiler, an assembly optimizer to simplify programming and scheduling, and a Windows debugger interface for visibility into source-code execution.
Radio frequency power amplifiers (RFPAs) for MRI are designed to take a relatively weak RF signal and boost it up to a stronger RF signal. How well this is done can have a direct impact on signal-to-noise ratio (SNR) and other parameters that can become clearly visible in MRI scans. (For example, failure to achieve the desired noise levels can lead to "ghosting" artifacts in the image.) Based on the STMicroelectronics STAC4932B RF power transistors, the company's STEVAL-IMR002V1 demonstration board helps designers implement a 2-kW 100-V 123-MHz Class AB peak power amplifier (PPA) for 3-Tesla MRI applications. It uses double push-pull bolt-down devices, two STAC4932B N-channel MOSFETs and can exceed 2,000 W at 123 MHz with large signal gain of 19 dB in Class AB and a drain efficiency of 60%.
With Mouser expanding its Medical Applications website, engineers will find a new MRI section with resources listed by supplier to bring them up to date on the newest technology and design developments. An interactive block diagram is used for easy navigation to a broad selection of products.
BY MURRAY SLOVICK
Fig. 1: Analog Devices AD5791 20-bit DAC.
Fig. 2: Functional diagram of TI TMS320C6672.
-
Engineering Distribution 17
ELECTRONIC PRODUCTS electronicproducts.com AUGUST 2013
IN PARTNERSHIP WITH
MRI Technology and Semiconductors: Worth Closer Examination
Magnetic resonance imaging (MRI), first introduced in hospitals in the early 1980s, is one of the most useful imaging techniques for medical diagnostics. MRI provides very clear and detailed pictures of tissues and internal organs using a strong magnetic field and high-frequency radio waves delivered in pulses. MRI offers images with excellent contrast between soft tissues. MRI images can differ in con-trast based upon the specific imaging technique used. This is different from ultrasound, X-rays, or computed tomography, which use only absorption, reflection, or scattering to form images. Since MRI does not expose the patient to radiation and has many other advantages, applications for MRI have grown very broad. Specifically, it is well suited for cardiology and in diagnosing cancer, stroke, and brain disorders.
For clinical use, MRIs use 1.5- or 3-Tesla magnets, a measure of magnetic field strength. The natural magnetic flux at the earths surface is only about 50 T. MRI resolution improves with a lower signal-to-noise ratio (SNR), which improves with an increasing magnetic field strength. In the MRI chamber, atoms in the body are literally magnetized, and pulsed RF is shot at the patient. The pulse resonates with the magnetized nuclei at a selected frequency. This flips the spin on
all resonating nuclei to align them in the same direction, and is called nuclear magnetic resonance (NMR). NMR is created in the patients body one slice at a time.
The magnetic resonance at the nuclear level is strong enough to induce a perceivable current in the nearby RF coil. This induced current is a signal that can be amplified with very sensitive electronics that are specifically designed to reduce electrical noise in the system. Noise competes with and corrupts the MRI signal. Accurate, precision devices that introduce the least noise and are stable over varying temperatures are required. Analog Devices new family of precision voltage reference chips (ADR45xx) introduce less than 1 Vp-p (peak-to-peak) to a VOUT of 2.048. For MRI, high speed is also a necessary attribute to rapidly communicate and process large amounts of imaging data.
In an MRI, once the signal is captured, magnetized nuclei spin-states return to normal in an exponential decay. The decay is also exploited to manipulate image contrast for diagnostics. RF pulses are repeated with varying amplitudes in every slice.
MRI allows detailed contrast manipulation, which dramatically enhances the diagnostic value of MRI because tissue contrast can be tailored to a particular purpose. Other imaging technologies do not have this feature.
Since newer products tend to provide better overall performance, Mouser has assembled a Medical Imaging site specifically designed to provide design engineers with a jump-start on part selection.
MRI has brought a whole new level of vision to medicine that continues to improve with new technology found at Mouser.
By Mouser Electronics, www.mouser.com
Fig. 1: (Left) Excerpts demonstrating the affect of temperature on output voltage regulation. (Right) The test plots for the occurance of noise (peak 10 Hz) with respect to output voltage. (Courtesy Analog Devices datasheet for AD4525)
Fig. 2: Mouser Medical Imaging applications block diagram with parts selected for MRI across multiple manufacturers.
Learn more at mouser.com/applications/medical-application-mri/
AD
VE
RT
ISEM
EN
T
-
Economy oscilloscopes redefi ned.
Oscilloscopes Redefi ned. With its brilliant 8.5-inch screen, fast update rate, full upgradability and 5-in-1 instrument integration, the Agilent 2000 X-Series oscilloscope is already fi rst in class. Now with more memory depth, new serial decode options and 5-year warranty, its accelerating ahead. Experience the complete Infi niiVision line for oscilloscope features and performance you need at prices that will surprise you.
See the Infi niiVision X-Series oscilloscopeswww.metrictest.com/agilent/scope.jsp
Agilent and our Distributor NetworkRight Instrument. Right Expertise. Delivered Right Now.
Infi niiVision 2000 X-Series70 to 200 MHz
New memory depth up to 1 Mpts New serial decode options*
New 5-year warrantyStarting at $1,258**
Infi niiVision 3000 X-Series100 MHz to 1 GHz8.5-inch displayUpdate rate to 1 million wfms/sMemory depth up to 4 MptsStarting at $2,929**
*I2C, SPI, CAN, LIN, RS232, UART **Prices are in USD and are subject to change
Infi niiVision 4000 X-Series200 MHz to 1.5 GHz12.1-inch touch screenInfi niiScan Zone touch triggeringUpdate rate to 1 million wfms/sMemory depth up to 4 MptsStarting at $5,611**
866-436-0887 www.metrictest.com/agilent
Agilent Technologies, Inc. 2013
-
Digtal ICs 19
ElEctronic Products electronicproducts.com AuGust 2013
UFS The next generation of embedded storageUniversal Flash Storage is set to improve embedded system performanceBY SCOTT BEEKMAN Director, Managed NAND Memory Products Toshiba America Electronic Components www.toshiba.com/taec/
For a few years now, e-MMC (Embedded Multi-Media Controller) has been the leading high-density embed-ded storage solution for mobile devices and for good reason. As a JEDEC standard solution, widely adopted by an enormous and growing smartphone and tablet market, the e-MCC format enabled a wide variety of applications to take advantage of the infrastructure of memory, chipset, and OS
vendors that support this solution. These applications include games, digital video cameras, printers, servers, eReaders, security systems, medical, automotive, and many more. The e-MMC market has skyrocketed from under $1 billion in global sales in 2009 to about $5 billion in 2012, and it contin-ues to grow.
So, what embedded Gbyte storage solution comes after e-MMC? As mobile devices become more sophisticated, inter-
We provide interconnect designs that take extremesof shock and vibration in stride, and meet ne-pitch specications ranging from 2.54mm down to 0.8mm pin-to-pin spacing. Our extensive selection of headers and sockets can be congured to accommodate awide range of board-to-board requirements.
Unique connector housings can be provided in two options: molded, using high temperature thermoplas-tics, or machined from FR-4 epoxy for prototyping and quick turnaround. Whatever the challenge, Mill-Max isyour solution.
Dont see what you need? Rapid prototypingand custom designs are our specialty.
DESIGNS AND OPTIONS TOMEET ANY REQUIREMENTS
Follow usMillMaxMfg
Like usMill-Max Mfg.Corp.
www.mill-max.com/EP635
Fig.1: UFS vs. e-MMC topology.
-
20 Digital ICs
AUGUST 2013 electronicproducts.com ElEcTronic ProdUcTS
face speeds and system level performance for embedded storage must continue to advance. For this reason, a new JEDEC standard embedded storage interface solution is taking shape Universal Flash Storage (UFS). Enabling significant boosts in interconnect performance; UFS is in-tended to be the next gen-eration of mobile mass storage after e-MMC. Like e-MMC, UFS incor-porates into one package one or multiple NAND flash die and a controller die that performs NAND management functions such as error code correc-tion (ECC), wear-leveling and block management, to simplify integration into product designs.
UFS operationUFS is not backward compatible to e-MMC and has a serial interface, in contrast to e-MMC's parallel format. As shown in Fig. 1, UFS supports full duplexing, enabling both reading and writing between the host processor and UFS device at the same time; e-MMC supports half duplexing, only allowing either reading or writing between the host processor and e-MMC device.
One key benefit of UFS is its faster interface. While e-MMC version 4.5 and 5.0 have maximum interface speeds of 200 and 400 Mbytes/s, respectively, UFS version 2.0 HS-G2 (High-Speed Gear 2) can supporttwo lanes, each operat-ing at a maximum speed of around 360 Mbytes/s, for a total of 720 Mbytes/s.
HS-G3 (High-Speed Gear 3) can sup-porttwo lanes, each operating at a max-imum speed of around 720 Mbytes/s, or 1,440 Mbytes/s total.
Since NAND performance can be a bottleneck, especially for write oper-ations, the benefit of the faster UFS
interface is best achieved by interleaving multiple NAND die within the UFS device. This is managed by the UFS con-troller. For this reason, higher densities, which have more die to interleave, can have higher performance, and are ex-pected to be the target for UFS initially. Figure 2 highlights some key differences between UFS and e-MMC.
Other UFS benefitsThe e-MMC solutionhas a feature called Packed Command, which enables the host system to issue a set of multiple commands to the e-MMC device, rather than one command at a time. However,
Fig. 2: UFS vs. e-MMC: key feature comparison.
for e-MMC, these sets of commands must all be read commands, or write commands, but not both intermixed. UFS has Command Queuing, which enables the host system to issue multiple read and write commands, to be executed by the UFS device in parallel, enabling improved
system performance.UFS has better power
efficiency during read and write operations, though e-MMC uses less power during idle or sleep states, and therefore e-MMC likely uses less power overall, depending on the application's use case.
Production rampThe e-MMC market's size and momentum will likely mean that these two mobile embedded solutions will continue to be supported in parallel for some time, with UFS initially supporting the
needs of applications demanding higher performance, and typically at higher densities, and e-MMC supporting the needs of applications driven to maintain the lowest cost.
An earlier version of UFS, version 1.1 (see Fig. 3), has been sampling since early 2013 for initial chipset and OS de-velopment. UFS version 2.0 is expected to be the first high-speed UFS solution that broadly goes to mass production, in early 2014. UFS will likely take a greater share of the embedded storage market as economies of scale increase and the rela-tive additional cost over that of e-MMC decreases over time.
Fig. 3: The THGLF0G9B8JBAIE 64-Gbyte UFS 1.1 storage IC comes in a 169-ball FBGA package.
-
Optik-D Series
Low insertion loss of 0.06 dB(typical) means less optical power is required, which can mean the difference between an inexpensive LED laser and a costly solid state laser
Suitable for harsh environments
More cost effective than D38999 and ARINC 600-based systems
Wide availability of accessories
Precision guide pin ensuresproper alignment
Hybrid Combo-D connector allows for combination of optical, power, signal and/or coax in a single connector
Fiber Optic Connectors for Rugged Applications
Conforms to ARINC 801
www.connectpositronic.com/optik-dCrimp sleeve not shown
-
22 Product Trends
AUGUST 2013 electronicproducts.com ELECTRONIC PRODUCTS
Insight into current product developments
Applications in
Transportation electronicsThe design of transportation systems is at a crossroads for certain. The move to electric and hybrid-electric automobiles is very significant now and I think it will continue to grow quickly. When will that technology, along newer automotive safety systems, be widely implemented in buses, trucks, and trains? There are some hybrid buses, but not a lot. Maybe a better question is why hasnt it been done already. But, there are many active innovations in public transport and in automotive.
Public transportationThere are some new and interesting applications in public transportation, and systems in many cities could use a number of updates. Fare collection is one area to look at. Rainer Lutz, senior global marketing manager at NXP tells us that electronic ticketing is making access to public transport faster, more reliable, and more secure. Mifare, NXPs extensive range of contactless IC prod-ucts, is the most popular and advanced development platform. It is used in over 650 cities from London to Auckland and from Moscow to Sao Paulo.
Innovative smart mobility concepts are being implemented that combine metro, bus, taxi and micro payments as well as bike and car rental on a single card. In addition, regional and country-wide schemes extend the scope of the passengers travel experience incorporat-ing street parking or museum entrance fees, for example.
Rainer adds that the latest industry trends also include mobile ticketing using NFC phones and banking cards which can be used for public transpor-tation; both can use Mifare function-ality for a seamless integration.Mobile ticketing enables the integration of travel information and ticketing in one device, encouraging a sustainable urban lifestyle.
Automotive convenienceSome significant automotive advances fall under a heading of convenience but, at lease for some people, these may be moving to the Cant Live Without category. Google and Apple Maps with traffic info and Garmin systems with traffic updates are being widely used. And now there are signs on city streets showing real-time availability of parking spaces in nearby garages. But, Id have to say the main emphasis in transportation electronics is in automotive safety.
Automotive safetyRenesasis one of the leading chip suppliers for automotive. I spoke with Amrit Vivekanand, vice president of the automotive marketing unit at Renesas. Amrit said, With all the post-crash safety technology, such as air bags, that we have today, there are still close to 100 automotive related deaths per day in the U.S., and this statistic unfortunately has been staying flat. Focus is shifting to pre-crash active safety and crash prevention as the only way to reduce the level of fatalities. This shift will drive tremendous electronic content into the vehicle.
All this pre-crash and post-crash technologies and the innovation that has been spawned will make autonomous driving a reality, delivering intelligent and self-aware automobiles. For the IC manufacturer, we know that devices that combine the performance of high-end SOCs and the safety levels of drivetrain/chassis applications will be required.
The backup camera may also soon be a safety requirement. The Department of Transportation has delayed the new car requirement until 2015. They say more analysis of the cost, said to be $2.7 B or as much as $18 M per life saved, is needed before issuing the mandate. The agency has previously delayed the rule three times,
Jim Harrison
Vishay Intertechnology: www.vishay.com
Freescale Semiconductor: www.freescale.com
International Rectifier:www.irf.com
40-V family of automotive-qualified MOS-FETs offer RDS(on) as low as 0.75-m at 10 VGS. The family of 22 devices come in D2Pak-7P, D2Pak, DPak, TO-262, IPAK, and TO-220 packages and current ratings up to 240 A. The devices offer 765-mJ single-pulse ava-lanche energy and a tested value to 1,485 mJ. Pricing begins at $0.39 ea/100,000.
The AEC-Q200-qual-ified IHTH-0750IZ-5A and IHTH-1125KZ-5A high-current, high-temp through-hole inductors come in
0750 and 1125 case sizes. They operate up to 155C, with rated currents to 125 A and values from 0.47to 100 H. They have a frequency range up to 10 MHz, and handle high tran-sient-current spikes without hard saturation.
The Qorivva MPC577xK 32-bit embed-ded MCU is designed for automotive radar systems, providing high levels of
digital and analog integration for next-gen-eration advanced driver assistance systems (ADAS) systems. When combined with the MRD2001 77-GHz radar front-end chipset, it offers a complete system-level radar solution.
-
NEW!Cost Eff
ective
Testers
LCR Meter IM3523Reduces Inspection & ManagementCosts on Production Lines Can perform measurements at high speed under multiple conditions
(C-D + ESR measurement and L + DCR measurement) Optimal measurement conditions can be set automatically according to the test sample so switching between
set-ups is a snap.
$2,955
$4,955 $5,955LCR Meter IM3533Comprehensive Transformer &Coil MeasurementsAll the features of the IM3523 plus: DCR temperature compensation Measurements necessary to evaluate transformers
LCR Meter IM3533-01High Accuracy & Easy Operation Ideal for R&D in ElectrochemistryAll the features of the IM3523 and IM3533 plus: Reliable & highly accurate measurements Frequency sweep function
Producing High Quality Products For 7 Years
6 Corporate Drive Cranbury, NJPhone: 609-409-9109Fax: 609-409-9108
www.hiokiusa.com
ISO 9001ISO 14001FOR A CLEAN
ENVIRONMENTWere doing our part
INNOVATION!New Series of LCR Meters
-
AUGUST 2013 electronicproducts.com ELECTRONIC PRODUCTS
an electronic products special series
24 Energy-Saving Initiative
Semiconductor advances make smarter, slimmer power suppliesAs equipment becomes smarter, maximizing energy efficiency and usage modes, power supplies can also act smarter by using the latest power semiconductor innovationsBY TIM KASKE, Product Marketing Manager for DC-DC Power Products, ON Semiconductor, www.onsemi.com
As PCs and televisions adopt ever slimmer and more elegant form factors, power supplies must achieve lower profiles and adapt-ers for ultra-portable computers must become more compact and lightweight travelling companions.
To help meet targets such as these, quasi-square-wave resonant (QR) power supplies provide high switch-ing efficiency and reduce EMI, which can simplify shielding or suppres-sion. Managing the power supply, a combined flyback and power-factor correction (PFC) controller allows designers to reduce component count. Moreover, by turning off the PFC under low/no-load condition, the controller can improve standby efficiency. The roadmap for this type of device is moving towards further feature integration and enhanced switching performance for lower audible noise.
Combination QR/PFC controllersA number of combination devices are available, featuring PFC and quasi-reso-nant flyback control in a single package. High-voltage IC technology allows direct startup from the rectified ac-line voltage. Logic circuitry controls the flyback and PFC switching waveforms as well as functionality such as soft-start and protection features including overcurrent, overvoltage, and overtem-perature protection, safe restart and demagnetization detection.
During normal operation, PFC en-
hances efficiency by minimizing reactive power and preventing distortion of the line-voltage waveform. It is mandatory in appliances rated over 70 W, but is not required at lower power levels, where energy losses in the PFC circuitry can reduce efficiency. To save these losses, some commercial combination flyback/PFC controllers are able to turn the PFC off and hence improve efficiency at light loads and in standby mode.
A novel feature of ON Semicon-
ductors NCP1937 controller allows the user to program the PFC disable threshold based on the percentage of output power. Internal circuitry generates a current proportional to the output power, which is scaled and averaged using an external resistor and capacitor to produce a voltage proportional to output power. The IC uses this voltage in conjunction with an integrated PFC disable timer and a reference that varies with the line voltage to coordinate turning off and re-enabling the PFC. This allows the PFC stage to be disabled between 25 and 50% of the load at low line and be-tween 50 and 75% at high line. The PFC
stage is also disabled during power-up until the flyback soft-start time expires. In addition, the circuitry needed to turn off PFC by opening the feedback connection is integrated in the device. Conventional combination devices re-quire an external feedback connection with a MOSFET circuit to open or close the loop as required. Figure 1 illustrates the PFC on/off control circuitry.
This feature provides one example of how advances in high-voltage IC
technology are allowing manufactur-ers to deliver more highly integrated controllers that allow power supply designers to eliminate additional external circuitry and further improve efficiency across the load range. ICs with high-voltage capability have typ-ically provided only limited digital ca-pability. More advanced high-voltage processes now allow smaller digital feature sizes, permitting extra on-chip functionality, which enables designers to build smarter and more accurate power supply solutions within smaller form factors than has been possible in the past.
Fig. 1: Integrated circuitry for PFC on/off control.
-
EMI Filter
Line
Rectifier IC and Switches LEDs
IC
310
320
330
340
350
360
370
380
390
60
70
80
90
100
110
120
130
140
150
160
170
180
Curr
ent (
mA
)
Input Voltage
LED Current (mA)
LEDrivIRIRS2980
LEDLEDrivIRIRLEDLEDLEDrivIRLEDLEDrivIR
IRS2980 Features Internal high voltage regulator
Hysteretic current control
High side current sensing
PWM dimming with analog or PWM control input
Free running frequency with maximum limiting (150kHz)
IRS2980 Benefi ts Low component count
Off-line operation
Very simple design
Inherent stability
Inherent short circuit protection
Demo Board Specifi cations Input Voltage 70V to 250V (AC)
Output Voltage 0V to 50V (DC)
Regulated Output Current: 350mA
Power Factor > 0.9
Low component count
Dimmable 0 to 100%
Non-isolated Buck regulator
for more information call 1.800.981.8699 or visit us at www.irf.com
High-Voltage Buck Control ICs forConstant LED Current Regulation
THE POWER MANAGEMENT LEADER
PartNumber
Package VoltageGate
Drive CurrentStartupCurrent
Frequency
IRS2980S SO-8 450V +180 / -260 mA
-
AUGUST 2013 electronicproducts.com ElEcTronic ProdUcTS
an electronic products special series
26 Energy-Saving Initiative
Keys to improvementON Semiconductors 700-V high-volt-age process also allows the controller to integrate most of the circuitry for discharging the X2 input filter capacitor when the ac-line voltage is removed a feature required by safety agency standards. This saves the PCB space and power consumed by the external resistor network used for X2 ca-pacitor discharge. The NCP1937 controller has two high-voltage startup circuits, and a novel approach is used to reconfigure these to discharge the input filter capacitance upon removal of the ac-line voltage.
Other integrated features made possible by the advanced process technology, saving sever-al external components, include a power-savings mode (PSM) in which the supply current is reduced to below 70 A. The typical approach taken with conventional flyback control ICs uses an active-off signal to initiate the low-power mode, which requires an additional bias current to pull down the optocoupler on the secondary side and reduces the overall system efficiency. In contrast, the NCP1937 has internal circuitry that eliminates the need for such a bias current, thereby improv-ing system efficiency when no load is present.
The increased digital integration combined with the advanced 700-V high-voltage process also allows more of the circuitry required for protection features, such as fault detection, current sensing, and overpower compensation to be implemented on chip, reducing reliance on external components.
Better user experienceQR operation of the flyback converter is currently popular in laptop power adapters and televisions, mainly by virtue of zero-voltage switching (ZVS), or valley switching, which improves switching efficiency and produces lower electromagnetic interference (EMI) than a hard-switching architecture.
By nature, the QR converters switch-ing frequency varies according to input and output load conditions and tends to increase as the output load decreas-es. In a conventional QR converter, the free-running frequency is typically clamped at 125 kHz, which is below the 150-kHz CISPR-22 EMI starting point. Hence, at light loads, the MOS-
FET cannot turn on as soon as a valley is detected but must wait8 s, causing some valleys to be ignored. However, if the output power is at a level such that the off-time needed for cycle-by-cycle energy balance falls between adjacent valleys, two or three cycles of first-val-ley switching may be followed by one cycle of second-valley switching. This phenomenon, known as valley jumping, causes large variations in the switching frequency, which are compensated by large changes in the peak current, result-ing in audible noise in the transformer.
Skip-cycle or frequency-foldback operation is often used to reduce the switching frequency as the frequency clamp is reached. This is effective in increasing light-load efficiency, but does not prevent valley jumping. Another drawback of this approach is the rela-tively low minimum switching frequency required, typically around 30 kHz, neces-sitating a larger transformer.
ON Semiconductors patented Valley Lockout technique eliminates valley jumping by locking the converter in its
selected valley until a significant change in output power is detected. In the NCP1937 this is achieved by using a gang of comparators to monitor the voltage on the feedback pin and feed the informa-tion to a counter. The hysteresis on each comparator locks the operating valley. In addition to this, a frequency foldback circuit based on a VCO reduces the
switching frequency as the output power decreases, delivering a further improve-ment in efficiency at light load.
With this innovation, which delivers improved efficiency and a better user experience, combined with increased on-chip integration of features essential for correct operation of flyback/PFC combination controllers, designers can meet the requirements of todays con-sumer and business electronics markets.
Demands to continue improving the energy efficiency of high-volume electronic products such as PCs and televisions are coming from many directions, including governments and eco-design bodies. For end users, products that are smaller, slimmer, and lighter are consistent with meeting these requirements as well as their own desires for greater style and mobility. As equipment becomes smarter, maxi-mizing energy efficiency across diverse operating conditions and usage modes, power supplies can also look and act smarter by using the latest power semi-conductor innovations.
Fig. 2: ON Semiconductors valley lockout detection circuitry.
-
Analog, Digital & Mixed-SignalICs, Modules, Subsystems & Instrumentation
2 Elizabeth Drive Chelmsford, MA 01824978-250-3343 tel 978-250-3373 faxwww.hittite.com [email protected]
Receive the latest product releases - click on My Subscription
Download Hittite at the App Store
Passive Mixer Solutions for Backhaul Radios to 90 GHz
HIGH PERFORMANCE MIXERS
We Offer Complete Microwave & Millimeterwave Radio Chipset Solutions
A SELECTION OF OUR MICROWAVE & MILLIMETERWAVE MIXERSPart
NumberRF Frequency
(GHz)Function
IF Frequency(GHz)
ConversionGain (dB)
LO / RFIsolation (dB)
IIP3(dBm)
HMC1042LC4 15 - 33.5 I/Q Mixer / IRM DC - 3.5 -10 30 +22
HMC1048LC3B 2 - 18 +13 LO, TPL-BAL 16 - 22 -10 45 23
HMC773LC3B 6 - 26 +13 LO, DBL-BAL DC - 8 -9 38 22
HMC1015 26 - 32 +13 LO, TPL-BAL 16 - 22 -10 45 22
HMC560LM3 24 - 40 +13 LO, DBL-BAL DC - 17 -10 35 21
HMC1043LC3 26 - 32 +13 LO, TPL-BAL DC - 2 -10 35 19
HMC-MDB169 54 - 64 +13 LO, DBL-BAL DC - 5 -8 30 13
HMC-MDB277 70 - 90 +14 LO, DBL-BAL DC - 18 -12 - -
HMC1057 71 - 86 x3 LO Sub-Harmonic, I/Q Mixer DC - 12 -12 30 13
HMC1058 71 - 86 x3 LO Sub-Harmonic Mixer DC - 12 -11 28 6
Passive: No DC Bias Required
Wide IF Bandwidth: DC to 12 GHz
High LO/RF Isolation: up to 30 dB
High 2LO/RF Isolation: up to 60 dB
Upconversion & Downconversion
x3 LO Input
HMC1057/1058 2 LO/RF Isolations
-70
-60
-50
-40
-30
30 33 36 39 42 45
HMC1057 HMC1058
ISO
LAT
ION
(dB
)
LO FREQUENCY (GHz)
HMC1058
NEW!
NEW!
HMC1057
HMC1058
E-Band!71 to 86 GHz
-
AUGUST 2013 electronicproducts.com ElEcTronic ProdUcTS
28 Cover Story
HCC ultrasound advances diagnostic clinical proceduresCutting-edge ultrasound research requires a high-channel-count (HCC) system that can interface to large matrix arrays
BY DANNY KREINDLER, Senior Director of FAE and Technical MarketingCephasonics, www.cephasonics.com
One area of medical research thathas beengaining a lot of attention is shear-wave elastography imaging. This technique has enormous poten-tial for medical diagnosis due to its higher contrast properties compared to traditional B-mode or harmonic imaging. In shear-wave elastography imaging, after generating a push pulse, a shear wave is created in the region of interest in the tissue. This imaging technique is done today using one-dimensional linear arrays that produce a less satis-factory two-dimensional slice. Capturing the shear-wave with a high-channel-count (HCC) ultrasound matrix array, and then generating and processing volumetric data,may lead not only to research breakthroughs in this field, but eventually clin-ical adoption of new diagnosis methodsfor many diseases, including breast cancer.
Shear-wave elastography, as well ascutting-edge ultrasound research in many fields, requires an HCC ultra-sound system that can interface to large matrix arrays.In the past, researchers seeking such a high channel-count system mostly built the system on their own. However, academic institutes found such an endeavor to be very costly and time-consuming, often running way over budget and taking years longer than planned to build. After all, universities need to focus on conducting research using the system; they are not set up to
build the system itself. Further, support and continuous maintenance of a one-of-a-kind in-house-built system is very costly, and can result in lengthy down-timeduring whichno research can be conductedwith the system.
AnHCC system needs to be, in essence, both a flexible ultrasound gener-ator and a high-bandwidth data acquisi-tion system (DAS). Any HCC system is comprised ofthe five major electronics subsystems seen in Fig.1.
TheHCC system's ultrasound gen-erator (TX) includes all the transmit circuitry and digital beam formation required to generate ultrasound pulses to the transducer.The ultrasound receiver (RX)provides all analog conditioning circuitry, the ADCs, and (optional) digital receive beam formation required to sample RF data from each channel
and, optionally, generate beam data from it. The data transportand interconnect subsystemfundamentally includes the multiple high-speed data links, their con-trol, protocol, cabling, and connectors re-quired to transport the receive data from
the RX subsystem to thehost subsystem.The host computer (Host)isthe
master controllerfor the system hard-ware, including TX and RX, memory, HDD, and so forth. The Host contains very high-end graphic processing units (GPUs) toprovide researchers with fast memory and I/O data paths, as well as access to the high-performance compu-tation needed to run complex research algorithms. Lastly, there is the Power Supply Unit (PSU), whichsupplies all power rails to the system, including the ultrasound-specific high-voltage rails required by the ultrasound generator.
Fig. 1: The high-level block diagram for a high-channel-count systemshowsitsfive major subsystems:(counterclockwise from upper left) the ultrasound generator, the ultrasound receiver, the data transport & interconnect subsytem, the host, and the power supply unit.
-
AUGUST 2013 electronicproducts.com ElEcTronic ProdUcTS
30 Cover Story
A realization of such an HCC system will require a hierarchical architecture. A baseline system of some number of channels (typically a power or two such as 64, 128, or 256 channels) can be designed. This baseline system will include a number of transmit and receive channels along with all their control and timing circuitry, and ultrasound-spe-
cific high-voltage power supplies. In this baseline system, the TX subsystem consists of a number of transmitter mod-ules that include a fine delay resolution and multiple-level pulsing circuitry for each channel allowing users to generate virtually any arbitrary transmit sequence at various voltage outputs. Since most ultrasound transducers can use the same
elements both for transit and receive, the baseline RX subsystem will consist of the same number of receiver modules imple-menting the same number of channels. This symmetrical approach simplifies the wiring between the electronics and the transducer connector. Receive channels will be amplified with commontime/gain compensation (TGC) to account for signal attenuation with depth in the tis-sue. Next, at the channel level, sampling of the analog signal is accomplished by a dedicated ADC. Sampling rates should range up to 65 Msamples/s to comfort-ably oversample signals in the ultrasound bandwidth.
HCC systems inherently imply trans-port of huge amounts of data. For exam-ple, a 4,096-channel system, using 12-bit ADCs sampling at 65 MHz will produce approximately 3.2 Tbits of raw RF channel data per second. Many research applications indeed require all this data, and thus the system needs to be designed for such a "worst-case" scenario. But, transporting and storing so much data further upstream can be expensive, and pointless when all that data is not needed to accurately conduct the research at hand. Thus, the RX module should also implement several signal-processing functions including demodulation, fil-tering, and decimation. These functions can be used to reduce data rates. Further, for quick imaging or for probe placement verification, a beam-formed data path can be provided as well.
A number of such baseline systems are then properly interconnected to create larger systems. For example, four 1,024-channel systems can be used to build a 4,096-channel system.
The data transport and interconnect subsystem is designated as its own sub-system due to its complexity andthe very high throughput demands placed on it, as previously discussed. Although often overlooked, the design and implementa-tion of such a subsystem is non-trivial. The performance, robustness, flexibil-ity, and viability of the system depend on it. The subsystem needs to support continuous data transfer without much limitation. In some extreme situations where this is not feasible with raw data,
Life-Saving, CustomMagnetic ComponentsIf lives are at stake, the choice for custom magnetic
components is Datatronics Romoland, Inc. Were
designed into implantable pacemakers, portable
defibrillators, pacemaker-defibrillators, brain
therapy devices, dental equipment and more.
Our line of custom magnetic components include:
> Hi-Voltage Transformers
> Power and Swithing Transformers
> Sense Coils
> Fine Wire Magnetics (to 56 AWG)
The Magnetics Design ExpertDownload our new Short Form Guide, Custom MagNETicsWeb Design Tool and White Papers at datatronics.com orcall 1-951-928-7700.
C t
We meet the mostdemanding environmental
and quality standards
MIL-PRF-27, MIL-PRF-21038,MIL-STD-981
NASA Space Station Approved
AS9100 Rev B, ISO 9001:2000
J-STD-001, Class 3
EN ISO9000, EN ISO13485(Pending)
-
w w w. p o w e r g a t e l l c . c o m | ( 8 6 6 ) 5 8 8 - 1 7 5 0
www.powergatellc.com/gha
Authorized Distribution Center for North America
The Industrys Most Powerful Open-Frame 3x5 Power Supplyfor Medical (2 x MOPP) & ITE Applications
New GHA300/500 Series from Cosel for Medical & Industrial Applications 300W & 500W Single Output Models Convection, Conduction & Forced-Air Operation 2 x MOPP (Means of Patient Protection) High Efficiency Operation up to 92% Medical Approved (ANSI/AAMI ES/EN60601-1) ITE approvals (UL/EN60950-1) Measures only 3 x 5 x 1.38 Power Density up to 24 W/in3
Optional 5V @ 1A and 12V @ 1A Aux Outputs Backed by a 5 Year Warranty
Cosel, the quality leader with a failure rate of
-
32 Cover Story
AUGUST 2013 electronicproducts.com ELECTRONIC PRODUCTS
a capture-and-store option should be supported. For example, in a 128-channel RX module, a 12-cm scan with 6,400 12-bit samples at a 40-MHz sampling rate
will produce 9.83 Mb per fi ring (12 bits/samples x 6,400 samples x 128 channels). Using a fast 9-Gbit DRAM, 1,000 fi rings can be stored in the front-end. Finally, a
scalable protocol for properly handling and tagging the various sources types of data (channel, beam, and so on) needs to be implemented as part of any such subsystem (Fig. 2).
Th e Host complex in a baseline unit of a very-large-channel-count system is responsible for communicating user commands to the front-end controller and timing circuitry, and receiving the very-high-bandwidth data coming from the RX subsystemacross thedata trans-port and interconnect subsystem. Very high-end GPUs in the Host subsystem are responsible for some or all of the researcher's demanding computation needs. In larger systems using two, four, or more baseline systems hierarchically, another CPU/GPU server is needed to aggregate these baseline systems.
Th e PSU has to realize the ultra-sound-specifi c high-voltage dc/dc converter modules. Ultrasound power supplies are nontrivial. Extreme care must be taken to control noise in the design. A noisy PSU can contaminate the acquired data in many ways and may even compro-mise the research being conducted.
Finally, the HCC system must provide researchers full control over all of the system's confi gurability in real time. Th is interface preferably should abstract the hardware and low-level reg-ister access and allow parameters to be defi ned and set in high-level structures such as scans, frames, beams, fi rings, patterns, frequencies, fi lter coeffi cients, and the like. Th e acquired ultrasound data is available to the user via a shared memory interface.
Th e 1,024- to 4,096-channel cQuest Griffi n ultrasound research system recent-ly introduced by Cephasonics employs much of the above-mentioned critical architectural aspects. Th is HCC system also combinesa MATLAB interface topromote a fast learning curvefor sys-temoperation, and with proven, reliable technology to off er a much-needed 'buy' alternative to in-house implementations. Systems such as this willenable worldwide ultrasound researchers to focus entirely on conducting cutting-edge research that will hopefully lead to revolutionary new diagnostic clinical procedures.
t-yuden.com/automotive
800-348-2496
Extremely low failure rate Body and safety system grades Built with our own raw materials and advanced technology Quality controlled through entire manufacturing process Smaller cutting-edge solutions at competitive prices TS-16949 Certified Factory
AECQ200
*Please contact our salesoffice for latest information
QUALIFIED*
Fig. 2: Th e front end of an actualHCC ultrasound system shows some of theunique electronics needed to implement such a system.
-
New! ADW1 Series Latching 8 APower RelaysEnergy Saving!
Visit us online at www.panasonic.com/industrialemail [email protected] call 1-800-344-2112
Panasonic
Relays
Capacitors
Resistors
Connectors
Inductors
Sensors
Electromechanical
Circuit Protection
RF Modules
Semiconductors
Panasonic brings strategic innovations to our customers product development process. We provide the technology and engineering resources to enable manufacturers to plan and build world-class solutions to meet their customer needs.
Panasonics latest ADW1 Serieslatching-type power relay contributes to device energy savings. Fully IEC60335-1 compliant, this relay offers a surge breakdown voltage of 12,000 V. Perfect for energy-saving requirements while capable of switching 8 A on the contacts for applications such as smart meters, industrial equipment, security equipment, home appliances and various power supplies.
Panasonics New Hybrid design Surface Mount Aluminum Electrolytic Capacitors introduce a new technology that combines the benefi ts of both electrolytic and polymer products producing a capacitor with low ESR, low leakage current, high ripple current and smaller case sizes.
Hybrid Capacitors!EEH-ZA & EEH-ZC Series
Bluetooth, which is based on IEEE 802.15.1, was developed for the purpose of sending larger amounts of data quickly from computers to portable handheld devices. Key features include high data rate, frequency hopping, very small form factor and modest power consumption.
Panasonic offers a new Bluetooth RF module product line that makes connectivity between mobile devices easily implemented, creating a seamless data chain from sensors to the Web.
BLUETOOTH
www.panasonic.com/Bluetooth
mobile devices easily implemented, creating a seamless data chain from sensors to the Web.
Bluetooth ClassicBluetooth Multi-Mode Bluetooth ANT
Bluetooth Low Energy
New Series featuring:
Panasonics New NN30 Series integrates power MOSFETs that employ a hysteretic control system. This provides a high-speed response that minimizes output voltage fl uctuations in the presence of load current spikes. Panasonics NN30 Series has a user adjustable output voltage and a maximum current of 10A.
New! NN30 SeriesSynchronous DC/DCStep-Down Regulator
-
Measurement Specialties MS5805a miniature altimeter
34 Product RoundupSensors & Transducers
AUGUST 2013 electronicproducts.com ElEcTronic ProdUcTS
Pressure sensors have gotten more ca-pable and are tackling a wide variety of applications in which measuring pressure doesn't seem to be the point. Among the following sampling of pressure sensing devices from major suppliers, you'll find devices that serve as altimeters and replacements for ultrasonic and radar devices, as well as ones who tackle pressure measurement in novel ways.
Measurement Specialties (www.meas-spec.com) recently released the MS5805a miniature altimeter, actually a low-power digital barometric pressure sensor. The sensor's high precision it integrates a 24-bit delta-sigma ADC suits it for portable, battery-operated devices such as fitness gadgets, bike computers, adven-ture or multimode watches, variome-ters, and dataloggers. The sensor interfaces to virtually any microcontroller.
With a conversion time down to 0.5 ms via an IC interface, the device works from a 1.8 to 3.6-V supply, consuming just 0.6 A in operation and less than 0.1 A in standby mode at 25C. The fast conver-sion time includes an oversampling selection of up to 8192, allowing exceptionally low noise performance. With resolution of 0.02 mbar (equivalent to a 20 cm change in elevation), the inte-grated digital pressure sensor has a pressure accuracy of 4 mbar for pressures ranging from 300 to 1,200 mbar and temperatures of 20 to 85C. Further, it is splashproof down to 40 m and includes temperature measurement capabilities with an accuracy of 2C and a temperature resolution less than 0.01C.It is priced at $5.25 per unit in quantities of 10,000.
The Vortex1 from Farsens (www.farsens.com) is a battery-free RFID sensor tag capable of transmitting pressure data along with a unique identifier to a com-mercial EPC C1G2. The device features a LPS331AP pressure sensor from ST Micro-electronics with an absolute pressure range from 260 to 1,260 mbar. The tag comes in a variety of antenna designs and sizes to adapt the performance to the required application. The reading distance for the battery free pressure sensor tag is around
1.5 m and it can be embedded in a wide variety of materials, such as plastics or concrete. Evaluation kits are available.
The tag is designed for moni-toring pressure-sensitive assets and process management. That it needs no wiring simplifies retrofitting pip-ing systems, gas/liquid containers, or similar assets and processes due to
the low installa-tion investment required and the savings associated to sensor mainte-
nance due to battery changes.American Sensor Technologies (AST,
www.astsensors.com) has released the AST46DS explosion-proof pressure transducer with display. Available for pres-sures from 1 to 20,000 PSI, the sensor is price-competitive, and offers zero function
capability, voltage or 4 to 20-mA output signals, and all 316L stainless steel sensor materials.
The voltage output signal suits oil and gas well site applica-
tions. With many SCADA / RTU
sites powered by solar panels in remote locations, a pressure transducer with low current consumption can have an extended operating life; the AST46DS can operate as low as 8 Vdc and has current consumption as low as 2 mA. For offshore platforms, the transducer housing has a special layered
Farsens Vortex1
American Sensor Technologies AST46DS explosion- proof pressuretransducer with display
American Sen-sor Technologies AST4530 PVDF / PTFE submersible pressure transducer
-
36 Product RoundupSensors & Transducers
AUGUST 2013 electronicproducts.com ElEcTronic ProdUcTS
paint suitable for NEMA 4X environments and salt spray conditions. Using 316L stain-less steel, the $825 transducer is compliant to NACE MR0175/ISO 15156.
AST has also introduced the AST4530 PVDF / PTFE submersible pressure trans-ducer with measurement ranges from 0 to 2.5 psi up to 30 psi. Intended for liquid-level measurement of corrosive liquids in which
stainless steel or titanium cannot survive, the AST4530 is designed to offer excellent long-term survivability and stability.
Submersible pressure transducers offer some flexibility in comparison to ultrasonic and radar level sensors. Vapors generated from the liquid will not affect the sensing element of a submersible pressure transducer, since it is designed for optimal
compatibility. Foaming or reflections of the liquid will not generate false readings, be-cause the sensor measures liquid pressure based on specific gravity.
All exposed sensor materials are optimized for compatibility, including the PVDF cable and seal. Changes in pressure are transmitted through a PTFE diaphragm and converted to an output signal using ASIC electronics. Ratiometric 1 to 5 and 0.5 to 4.5-V outputs are available for low-cur-rent-consumption applications, whereas a 4 to 20-mA output is available long distance transmissions. The $595 submersible trans-ducers are vented to atmosphere through the cable for optimal accuracy.
Honeywell Sensing and Control (mea-surementsensors.honeywell.com) is now offering the Model S Series of subminia-ture pressure transducers. Featuring 1% accuracy, the sensors fit into tight spaces with little clearance, and measure pressure
ranges from 100 to 15,000 psi. The rugged transducers are designed to
handle high temperatures as well as pressures, and have a flush
diaphragm manufac-tured from 17-4
PH stainless steel with a high nat-ural frequency for applications
such as engine and transmission test
stands, pressure brake testing, and hydrau-lic sensor testing.
These transducers have a small electri-cal zero-balance circuit board, which is in the lead wire (approximately 1 in x 0.087 in thick); the board does not have to be at the same temperature as the transducers. All transducers have four strain gages in a Wheatstone-bridge configuration.
Honeywell also introduced two new Wing Union / Hammer Union pressure sensors for such applications as oil and gas drilling, mud pumps / mud logging, frac-turing and cementing, acidizing, well-head measurement, and standpipe stimulation. The model 425 is available in two accuracy levels (0.2% or 0.1% BFSL), while the Model 427 (0.2% BFSL) provides a wide, shallow sensing port that facilitates seam-less flow of more viscous media blends.
Richard Comerford
We EngineerThe Sustainable Future.
Engineering is Our PassionEngineers solve problems. Our optical and temperature sensors team solves the most demanding gesture and thermal sensing problems. Based on active light, time-of-flight or far infrared technology, we offer sensors to detect hand gestures with near infrared light or measure contactless temperatures with a single pixel, dual pixel or thermal cameras.
Smart Sensor Systems for a Sustainable FutureSafer Lifetimes by Design. Our engineers work together with our customers to improve quality of life through better sensing. Gesture Recognition sensors in cars simplify complex controls so attention is on the road not the radio. Infrared thermometers and thermal cameras detect fevers and save lives or make airco systems more energy efficient.
n Gesture Recognition Solutions Based on Active Light and Time-of-Flight technology
n Temperature Sensing and Interface Solutions Precise contactless temperature sensors, cost-effective thermal cameras and temperature sensor interfaces
See All Our Optical Sensors At: www.melexis.com/HMI
www.melexis.com/FIRray
WE ENGINEERGesture and
Temperature SensorsFor The Sustainable Future
Honeywell Sensing and Controls Model S Series sub-miniature pressure transducer
-
2013 Maxim Integrated Products, Inc. All rights reserved. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc., in the United States and other jurisdictions throughout the world.
ANALOG INTEGRATION ISNT FOR EVERYONE
-
38 Product UpdatePackaging, Cabinets, and Enclosures
AUGUST 2013 electronicproducts.com ELECTRONIC PRODUCTS
Keypad enclosures offer more choicesThe Comtec range of sloping front keypad enclosures is now available in seven standard sizes with external dimensions from 4.72 x 5.90 x 1.69 in. to 11.41 x 7.87 x 3.11 in. Four sizes are available with a battery compartment aperture in the base sec-tion which is designed for mounting an accessory bat-tery cradle. Three types of battery cradle are offered: one 9-V cell, two 9-V cells, or four 1.5-V AA cells.
The enclosures are molded in fine textured ABS (UL 94 HB) and come in two standard colors: off-white (RAL 9002) or black (RAL 9005). Priced starting at $22, they feature a so-called softline design with an ergonomically inclined (10) operating area to ensure comfortable operation of controls. Typical applications include telecom equipment, intercoms, surveillance devices, data collection, point-of-sale terminals, and a broad range of instrumentation.OKW Enclosures: www.okwenclosures.com
Vent aims to improve outdoor enclosureFor large outdoor enclosures with a volume over 200 l, the PolyVent XL screw-in protective vent is said to improve the enclosure's integrity, reliability, and safety in such applications as solar power, telecommunications, and exterior lighting. The vent meets the IP69K and UL 746C requirements, passes the IEC 62108 hail-impact test, performs over a 40 to 125C range, and requires no maintenance for the life of the electronics and the housing.
Changes in environmental temperatures cause air inside large-volume housings to expand resulting in pressures that sometimes exceed 200 mbar (3 psi) which can lead to failure of the housing seals and compromised internal electronics. The vent
Rack enclosures are strong and flexibleFor high-density server and network requirements, Titan DT series rack enclosures
are said to be the strongest rack in the industry - with certified static and dynamic load ratings of 5,400 and 3,300 lbs, respec-tively - andoffer a broad range of rack heights (24, 42, 44, 47, and 51 RU) and depths (36, 42, and 45 in.) to create extra space for power, cable, and cooling management. Cable raceways are available infour widths - 6, 8, 10, and 12 in. - to handle cable bundles of different sizes, and door options include vented or solid styles, including full doors or French doors with keyed handles. Vented doors have a 77% open pattern to provide optimal heat dissipation.
Available in 12 standard colors with a 10 year warranty, the cabinets employ an overhead chimney design to help dissipate thermal loads inside the rack, while hot/cold containment options prevent air mixing and lower total cost of ownership. Mount-ing-channel designs with finger cable management limit twisting and sag, and other mounting-channel options can accept 1-RU devices, freeing-up additional RU slots within the rack. Additional
options include overhead raceway choices, toolless power-strip mounting, and heavy-duty stationary/retractable shelves. An on-line rack configurator simplifies order specification, and racks ship with accessories mounted to user specifications.AMCO Enclosures: www.amcoenclosures.com
-
Agilent Technologies, Inc. 2012
Scan or visit http://qrs.ly/ey263t8 to see a video demo
No other oscilloscope can touch it.But you can.
Experience the difference. See demos, app notes and more.www.agilent.com/fi nd/4000Xscope
Agilent and our Distributor NetworkRight Instrument. Right Expertise. Delivered Right Now.
Buy from anAuthorized Distributorwww.agilent.com/find/distributors
Agilent Infi niiVision4000 X-Series Oscilloscopes 200 MHz to 1.5 GHz12.1-inch screen designed for touchInfi niiScan Zone touch triggering1M waveforms/sec update rateFully upgradable: bandwidth, MSO,dual-channel WaveGen, DVM, serial analysis including USB
Agilents next-generation oscilloscopes offer waveform update rates 20 times faster than the competition. With the latest capacitive touchscreen technology and innovative Infi niiScan Zone touch triggering, you havent really experienced an oscilloscope until now.
The oscilloscope experience redefi ned.
-
40 Product UpdatePackaging, Cabinets, and Enclosures
AUGUST 2013 electronicproducts.com ELECTRONIC PRODUCTS
Flameproof meter enclosures are IECEx certifiedNow available with IECEx certification, XJ_X series screw-cover flameproof meter enclosures come in 68 standard sizes, all approved to gas group IIB+H2 with an IP66 rating. The enclosures are available with solid cover or viewing window.
In addition to IEC 60079-0:2011, IEC 60079-1:2007-04, IEC 60079-31:2008 international standard qualifications, the enclosures have UL, and cUL approvals, and are also available with certifications rated to the ATEX Directive and compliant with all current standards.Adalet: www.adalet.com
can equalizes internal pressure b