Download - Covers, Frames & Grates
COVERS, FRAMES & GRATINGS 92
EH Smith supply a comprehensive range of ductile iron covers andgrates to BS EN 124, plus an extensive range of prefabricated steel covers. Both are available in standard sizes and bespoke one-offdesigns. The entire range of covers and grates are designed to incorporate the requirements of the end user, Highways Agency and other approved agencies.
Covers, Frames & Gratings
COVERS, FRAMES & GRATINGS
DUCTILE IRON PRODUCTS
93 COVERS, FRAMES & GRATINGS
A15 Cast Iron Manhole Cover & Frame - Pedestrian Loading
Clear Opening Size (mm) Over Frame Size (mm)
Kitemarked600 x 450 x 40 685 x 530600 x 600 x 40 685 x 685Kitemarked450 dia. PPIC 540 x 540450 x 450 x 40 540 x 540600 x 450 x 40 690 x 540600 x 600 x 40 690 x 690750 x 600 x 40 860 x 710900 x 600 x 40 1150 x 715
B125 Ductile Iron Manhole Cover & Frame - Car Park Loading
Clear Opening Size (mm) Over Frame Size (mm)
450 dia. 550 x 550450 x 450 x 75 555 x 555600 x 450 x 40 690 x 530600 x 450 x 75 705 x 555500 x 500 x 50 605 x 605600 x 600 x 40 690 x 690600 x 600 x 75 705 x 705600 dia. 692 x 692750 x 600 x75 850 x 700750 x 750 x 50 850 x 850900 x 600 x 75 1000 x 700900 x 900 x 75 1000 x 10001200 x 600 x 75 1300 x 740
DUCTILE IRON COVERS AND GRATINGSEH Smith can offer a comprehensive range of EN124 kite marked ductile Iron covers andframes and gratings designed and manufactured under stringent ISO 9000 series qualityprocedures.
When selecting your casting, care should be taken in deciding the suitability for the particular traffic situation according to the current standards:
BS EN124 Product Application Guide
Class Description Application
A15 Access covers and gratings capabale Areas where only pedestrians have accessof withstanding a 1.5 tonne test load
B125 Access cover and gratins capable of Car parks and areas of occasional standing a 12.5 tonne test load light with vehicular traffic
C250 Access covers and gratings capable of Areas not extending more than 500mm withstanding a 25 tonne test load from the kerb face into the carriageway
D400 Access covers and gratings capable of Areas where cars and lorries have access, withstanding a 40 tonne test load including carriageways. All units to be
either non-rock or silent in operationE600 Access covers and gratings capable of Areas where heavy loads are imposed
withstanding a 60 tonne test load such as loading areas, docks or aircraft pavements
F900 Access covers and gratings capable of Areas where very heavy wheel loads are withstanding a 90 tonne test load imposed such as aircraft pavements.
COVERS, FRAMES & GRATINGS
COVERS, FRAMES & GRATINGS 94
D400 Utility Ductile Iron Manhole Cover & Frame - Heavy Duty Estate Roads
Clear Opening Size (mm) Over Frame Size (mm)
600 x 450 x 100 745 x 595600 x 600 x 100 745 x 745600 x 600 x 150 745 x 745600 dia Square Frame 815 x 815600 dia Circ. Frame 815 x 815675 x 675 x 100 820 x 820675 x 675 x 150 820 x 820750 x 750 x 100 910 x 910
D400 Highway Ductile Iron Manhole Cover & Frame- Heavy Duty Highway Loading
Clear Opening Size (mm) Over Frame Size (mm)
600 x 600 x 100 800 x 800600 x 600 x 150 800 x 800675 x 675 x 100 855 x 855675 x 675 x 150 855 x 855750 x 600 x 100 930 x 780750 x 750 x 100 910 x 910900 x 600 x 100 1062 x 762900 x 600 x 150 1062 x 762900 x 900 x 100 1070 x 10701220 x 675 x 100 1390 x 8801220 x 675 x 150 1390 x 880
D400 Unite Ductile Iron Manhole Cover & Frame- Heavy Duty Highway Loading
Clear Opening Size (mm) Over Frame Size (mm)
600 x 600 x 100 800 x 800 x 100600 x 600 x 150 800 x 800 x 150675 x 675 x 150 875 x 875 x 150
C250 Ductile Iron Manhole Cover & Frame - Heavy Duty Loading
Clear Opening Size (mm) Over Frame Size (mm)
450 x 450 x 75 555 x 555600 x 450 x 75 705 x 555600 x 600 x 75 705 x 705600 dia. 692 x 692750 x 600 x 75 850 x 700900 x 600 x 75 1000 x 700
COVERS, FRAMES & GRATINGS
95 COVERS, FRAMES & GRATINGS
D400 Ductile Iron Gully Grate & Frame - Heavy Duty Highway Loading
D400 Captive Hinge
D400 Double Triangular
D400 Double Triangular
Pedestrianised gully grates also available. Please call for more information.
Clear Opening Size (mm) Over Frame Size (mm)
430 x 370 x 100 530 x 530430 x 370 x 150 530 x 530450 x 450 x 100 610 x 540500 x 350 x 100 655 x 440
Clear Opening Size (mm) Over Frame Size (mm)
450 x 450 x 100 600 x 540450 x 450 x 150 690 x 540600 x 600 x 100 780 x 780
Clear Opening Size (mm) Over Frame Size (mm)
382 x 320 x 75 685 x 530
Together with our manufacturing partners we are at the forefront of technical innovation promoting the latest solutions to on site problems. With this in mind Wrekin have introduced UNITE, a new concept designed to dramatically reduce wear and thereby extend the life of the casting.
UNITE Anti-Flex Design
Typical D400 Manhole Cover Deisgn
COVERS, FRAMES & GRATINGS
ELEVATA - MANHOLE COVER & FRAME
COVERS, FRAMES & GRATINGS 96
ElevAta - single fix solution for raising ironwork.ElevAta has been designed specifically to make the process of raising ironwork on Estate Roadsboth quick & easy, the frame only needs to be bedded in once and the whole assembly can thenbe raised in minutes using the bolting kits supplied. ElevAta installation involves 2 basic steps.
First Fix - Install the unit frame level to the binder course (lowered position). It is recommendedthat the installer has purchased one raising unit (3) to provide a reference level for the final surfacingcourse. Two heights of raising frames are available, which can raise the assemble 30mm & 40mmto suit the 2 standard surfacing course depths for Estate roads.
Second Fix - Raising the assembly to the surfacing course level. Simply order the correct heightsof raising frame (30mm or 40mm), then fllow the instruction manual and bolting kit supplied to fixthe raising frame into position and replace the cover/grating.
1
2
1. Spacer Bar (only used on lower position)
2. Double Triangular Cover
3. Raising Frame
4. Manhole Cover Frame
5. Fixing Bolts (x8)
6. Cover Coupling Bolts (x2)
3
4
An innovative design led to the development of ELEVATA. In response to the high costs associated with the reinstatement of iron work ELEVATA provides contractors with a simple andefficient method of raising manholes quickly and safely without having to break out and re-bed the assembly.
COVERS, FRAMES & GRATINGS
ELEVATA - GULLY GRATE & FRAME
97 COVERS, FRAMES & GRATINGS
Benefits of the ElevAta design:
• Only one bedding installation required.• Time saved, typically it takes 2hrs to raise 1 manhole cover (+24hrs curing time), ElevAta can reduce this time to under 10 mins for a manhle cover & less that 5 mins for a gully grating.
• No jack hammer required, removing the risk of damage to the bedding sub-structures & manhole cover frame.
• No requirement to build-up the suppporting substructures.• ElevAta provides a useful and accurate reference for both the Binder course level (lowered position) & the surfacing course level (raised position), ensuring the optimum tarmac depth is maintained.
• The ElevAta grating incorporates DTH (Double Tri Hinged) patented design feature, the grating is both captive hinge and double triangular (non-rocking).
• Fully Kitemarked in both lowered and raised positions.
1
2
3
4
5
6
1. Spacer Unit (only used on lower position)
2. Double Tri Hinged Grating
3. Raising Frame
4. Grating Frame
5. Fixing Bolts (x4)
6. Hinge Pin/Bolt (x1)
COVERS, FRAMES & GRATINGS
COVERS, FRAMES & GRATINGS 98
FABRICATED STEEL ACCESS COVERSEH Smith offer a wide range of quality fabricated steel covers manufactured to the FACTA(see table below) specifications.
Com
parisons***
GLW
Wheel Loads
Load Test Data
Typical Applications
A A15
C Pedestrian
0.6 tonne
N/A
5.0 x 1.0 x 1.0 =
5.0 x 1.6 = 8.0kN
Internal and external areas w
hich can only be used
duty
(5kN)
5.0kN
by pedestrians or cycles i.e. toilets,
changing rooms, footways and cycle tracks.
AA
N/A
N/A
5 tonne
1.5 tonne
N/A
15.0 x 1.1 x 1.15 =
19.0 x 1.6 =
Very light industrial areas, where sm
all trolleys and
cars/vans can manoeuvre
(15kN)
19.0kN
31.0kN
private driveways, trolley parks, hospital wards.
i.e. Domestic
AAA
N/A
N/A
10 tonne
2.5 tonne
0.5 tonne
25.0 x 1.1 x 1.15 =
32 .0 x 1.6 =
Delivery/service areas, shopping malls,
Light industrial areas, where trolleys
(25kN)
32.0kN
52.0kN
light ndustrial areas
and light pallet trucks operate.
B B125
B Up to 44
5.0 tonne
0.75 tonne
50.0 x 1.1 x 1.15 =
63.25 x 1.6 =
Pedestrian precincts, forecourts, commercial
Factories, industrial plants, where pick-up
tonne *
(50kN)
63.25kN
101.0kN
delivery/parking areas.
trucks and sm
all pallet trucks operate.
C C250
Up to 44
6.5 tonne
1.0 tonne
65.0 x 1.1 x 1.15 or
82.5 x 1.6 =
Factories, industrial plants, special axle loads,
Industrial areas w
here pallet and
tonne but
(65kN)
50.0 x 1.1 x 1.5 =
132.0kN
kerb side drainage
small fork-lift trucks operate
under special
82.5kN
conditions *
D D400
A Up to 44
11.0 tonne
3.0 tonne
108.0 x 1.1 x 1.15 or137.5 x 1.6 =
Heavy duty plant areas carriageways and industrial
Heavy duty industrial areas w
here
tonne but
(108kN)
50.0 x 1.1 x 2.5 =220.0kN
service roads w
here fast m
oving HGVs reach speeds
medium
duty fork-lift trucks operate
under special
137.5kN
of 20mph max.
conditions *
E E600
N/A
Special
16.0 tonne
5.0 tonne
158.0 x 1.1 x 1.15 =
200.0 x 1.6 =
Dockside and container storage areas w
here heavy
Very heavy industrial areas w
here l
application
(158kN)
200.0kN
320.0kN
transporters operate
arge heavy duty fork-lift trucks operate.
vehicles
F F900
N/A
Special
24.0 tonne
N/A
237.0 x 1.1 x 1.15 =
300.0 x 1.6 =
Civil and military airfield aprons, where particularly heavy wheel loads are imposed
application
(237kN)
300.0kN
480.0kN
by aircraft and towing vehicles.
vehicles
FACTA
EN124
BS497
Gross
Wheel
Wheel
Acceptance
Strength
Pneumatic Tyres
Solid Tyres
Class
Class
approximate
Laden
Loads **
Loads **
Test
Test
equivalent
Vehicle weigth(Slow moving)
(Slow moving)
(Static Wheel
(Acceptance
class
(Slow moving)
Pneumatic
Solid
Load plus
Test load plus
overload &
ultimate safety
dynamic
factor)
effects
* Under the “Road Vehicles (Authorised Weight) Regulations 1998”, Axle weights for the UK are lim
ited to 11.5 tonnes maximum ‘Refer to ‘Acceptance Test for maximumdesign load/load bearing capacity)
** Slow moving wheel loads are deemed to be speeds no greater than 20mph.
*** These comparisons are for guidance only and are not intended to be exact.
COVERS, FRAMES & GRATINGS
99 COVERS, FRAMES & GRATINGS
Other sizes & loadings are available to order. Please call for more information.
Double Seal Locked Pressed TopClear Gross Laden Vehicle WeightOpening (mm) 2.5 Tonne 5 Tonne 10 Tonne 17 Tonne300 x 300 ✓ ✓
600 x 450 ✓ ✓ ✓
600 x 600 ✓ ✓ ✓ ✓
750 x 600 ✓
Driveway Pavior Cover - 10 Tonne GLVW
Clear Opening (mm)
450 x 450 x 80600 x 450 x 80600 x 600 x 80750 x 600 x 80
GALVANISED STEEL MANHOLE COVERS & FRAMESEH Smith have a range of fabricated steel manhole covers and associated products, manufactured to the highest levels of quality, to FACTA specifications.
Clear Opening (mm)
300 x 300450 x 450600 x 450600 x 450600 x 600750 x 600900 x 600900 x 750
SINGLE & DOUBLE SEAL STEEL MANHOLECOVERS & FRAMESSingle Seal Drop In Pressed TopClear Gross Laden Vehicle WeightOpening (mm) 2.5 Tonne 5 Tonne 10 Tonne 17 Tonne300 x 300 ✓
450 dia ✓
450 x 450 ✓ ✓ ✓
600 x 450 ✓ ✓ ✓ ✓
600 x 600 ✓ ✓ ✓ ✓
750 x 600 ✓ ✓
750 x 750 ✓ ✓
900 x 600 ✓ ✓
900 x 750 ✓ ✓
Over Frame Dimension Table - 10 GLVW* Tonne Screed Infill Manhole Covers & Frames (*Gross Laden Vehicle Weight)
COVERS, FRAMES & GRATINGS
COVERS, FRAMES & GRATINGS 100
In addition to the stock range, we offer a bespoke service to suit a wide variety of applications all made to ISO 9000 quality standards, options include;
Solid Top Covers• Locking screw options including high security home office approved bolts• Turnbuckle locking devices • Multiple leaf covers• Sealing options including neoprene gaskets and sealing plates• Safety grids• Hinged units including torsion spring and gas ram assist• High strength covers for extra heavy loadings
Recessed Covers• Brass or stainless edge • Loadings up to fork lift duty• Various depth trays to suit block pavior, concrete or tarmac infill• Mild steel, stainless and aluminum options