Download - Configuring the EVO + BIB
-
8/13/2019 Configuring the EVO + BIB
1/31
SSOOPP
CCoonnffiigguurriinnggBBIIBBffoorr
HHBBLLSScceennaarriioo
-
8/13/2019 Configuring the EVO + BIB
2/31
Configuring the EVO 1900 Mega Hz with PST 3.1.6
Press OK
Select CDMA
-
8/13/2019 Configuring the EVO + BIB
3/31
Select CDMA-2 which will bring the check box with it and view will become something like that.
Now select the right COM port, until the bulb below is turned Yellow.
-
8/13/2019 Configuring the EVO + BIB
4/31
Now press the button Read from phone which will bring some thing like that.
Press OK
Now change to the TAB CDMA-2
-
8/13/2019 Configuring the EVO + BIB
5/31
Here PPP AN has check box, whle User has some thing like [email protected], which you will
copy and paste under the PPP UM, User:[email protected]
mailto:[email protected]:[email protected] -
8/13/2019 Configuring the EVO + BIB
6/31
Then press Write
Now press OK
-
8/13/2019 Configuring the EVO + BIB
7/31
You will get another BIG Green Success.
-
8/13/2019 Configuring the EVO + BIB
8/31
Now comes the first TAB CDMA, here you will also press the Write Button
-
8/13/2019 Configuring the EVO + BIB
9/31
After that one can exit the PST V3.1.6
Press OK
Now disconnect the EVO and then reconnect it again.
You will be presented with some thing like that.
-
8/13/2019 Configuring the EVO + BIB
10/31
Press Setting button.
-
8/13/2019 Configuring the EVO + BIB
11/31
Here under the UserName we will give the EVO PPP AN; which in our case [email protected]
while the password will be ptcl
mailto:[email protected]:[email protected] -
8/13/2019 Configuring the EVO + BIB
12/31
Now press Apply
Press OK
After disconnecting the EVO, connect it again and press Connect
-
8/13/2019 Configuring the EVO + BIB
13/31
And you will be presented with some thing like that, this is to confirm that EVO is configured OK, and it
is working.
Now connect EVO to the Business in a Boxand Ethernet port should be connected withthe LAN port on BIB ~ Ethernet port on laptop,
-
8/13/2019 Configuring the EVO + BIB
14/31
Now select the Obtain an IP address automatically.
Now ping the 192.168.1.1, the default IP from the Laptop.
-
8/13/2019 Configuring the EVO + BIB
15/31
Now typehttp://192.168.1.1/in address bar of the browser, here the login information should be as
under.
Login: admin
Password; admin
One should be treated with something like that.
Now step # 1
Go to Menu, Management>Update Software
http://192.168.1.1/http://192.168.1.1/http://192.168.1.1/http://192.168.1.1/ -
8/13/2019 Configuring the EVO + BIB
16/31
Tools -- Update Software
Step 1:Obtain an updated software image file from your ISP.
Step 2:Enter the path to the image file location in the box below or click the "Browse" button to locate
the image file.
Step 3:Click the "Update Software" button once to upload the new image file.
NOTE: The update process takes about 180 seconds to complete, and your DSL Router will reboot.
Here browse to the firmware file (6.78 Mb file) AVS920W_PTCL_A_0_33_V1.1.14.img and press Update
Software
-
8/13/2019 Configuring the EVO + BIB
17/31
-
8/13/2019 Configuring the EVO + BIB
18/31
Press OK
Step # 2
Now go to the Advanced Setup>WAN Services>
Wide Area Network (WAN) Service Setup
Choose Add, or Remove to configure a WAN service over a selected interface.You can add 16WAN services at best.
ETH and PTM/ATM service can not coexist.
Interface Description Type Vlan8021p VlanMuxId ConnId Igmp NAT Firewall Remove Edit
ppp0 pppoe_0_0_33 PPPoE N/A N/A N/A Disabled Enabled Enabled
Now press Add button
WAN Service Interface Configuration
Select a layer 2 interface for this service
Note: For ATM interface, the descriptor string is (portId_vpi_vci)
For PTM interface, the descriptor string is (portId_high_low)
-
8/13/2019 Configuring the EVO + BIB
19/31
Where portId=0 --> DSL Latency PATH0
portId=1 --> DSL Latency PATH1
portId=4 --> DSL Latency PATH0&1
low =0 --> Low PTM Priority not setlow =1 --> Low PTM Priority set
high =0 --> High PTM Priority not sethigh =1 --> High PTM Priority set
Select 3g and press Next
-
8/13/2019 Configuring the EVO + BIB
20/31
Here fields should be filled as under,
APN: should clear the text in this box
3G PhoneNum: #777
PPP Username:[email protected]
PPP Password:ptcl
Enable FireWall: Uncheck
Enable NAT: Check
The press Apply
mailto:[email protected]:[email protected]:[email protected]:[email protected] -
8/13/2019 Configuring the EVO + BIB
21/31
-
8/13/2019 Configuring the EVO + BIB
22/31
While the Device Info>WAN should show the newly configured WAN, kindly note down the IPv4 Address
in front of connected WAN, as in this case 10.18.16.98, is unique and static IP, and when one will call the
HBL NOC, one should let them know about the WAN IP.
Step # 3
Enabling Services of BIB
Go to Management>Access Control>Services
-
8/13/2019 Configuring the EVO + BIB
23/31
Select all of the services and press Save/Apply
Step # 4
Disable Wireless and DHCP
Go to the Wireless> and follow these instructions,
1. Click Basic tab under Wireless option from left toolbar.
2. Uncheck Enable Wireless option
3. Click Apple/Save
Wireless -- Basic
This page allows you to configure basic features of the wireless LAN interface. You can enable or disable
the wireless LAN interface, hide the network from active scans, set the wireless network name (also
known as SSID) and restrict the channel set based on country requirements.Click "Apply/Save" to configure the basic wireless options.
-
8/13/2019 Configuring the EVO + BIB
24/31
Uncheck all of them and press Apply/Save
Now go to the Advanced Setup>LAN option and provide the LAN IP, which in our case is provided by HBL
under the heading of CPE in the provided Excel sheet.
-
8/13/2019 Configuring the EVO + BIB
25/31
Select the option of Disable DHCP Server, and then press Apply/Save
Now press OK.
Now go to the LAN settings of the laptop again and set the IP from range of 10.30.234.1xx, as IP s hould
be of the same range/subnet as one given on the LAN port of the BIB.
-
8/13/2019 Configuring the EVO + BIB
26/31
Press OK
-
8/13/2019 Configuring the EVO + BIB
27/31
-
8/13/2019 Configuring the EVO + BIB
28/31
Now press Add.
NAT -- Virtual Servers
Select the service name, and enter the server IP address and click "Apply/Save" to forward IP
packets for this service to the specified server. NOTE: The "Internal Port End" cannot be
modified directly. Normally, it is set to the same value as "External Port End". However, if you
modify "Internal Port Start", then "Internal Port End" will be set to the same value as "InternalPort Start".
Remaining number of entries that can be configured:32
Use Interface: 3g/ppp1
Select a Service: Telnet Server
Server IP Address: This IP is provided by the HBL under the heading of SSG, which in our case will be
10.30.234.41
-
8/13/2019 Configuring the EVO + BIB
29/31
Press Apply/Save
Press OK
-
8/13/2019 Configuring the EVO + BIB
30/31
Now same step should be followed with another service, press Add
Use Interface: 3g/ppp1
Select a Service: IPSEC
Server IP Address: 10.30.234.41
-
8/13/2019 Configuring the EVO + BIB
31/31
Press Apply/Save
Now one has to connect the Ethernet port of BIB with the first available with the Juniper LAN port, and
should call the HBL NOC, to check whether the BIB box can be accessed.
Note: Take care to remember the WAN IP on 3g, and the Ethernet port connected with the SSG 20
hardware.