configuring the evo + bib

8/13/2019 Configuring the EVO + BIB

1/31

SSOOPP

CCoonnffiigguurriinnggBBIIBBffoorr

HHBBLLSScceennaarriioo


2/31

Configuring the EVO 1900 Mega Hz with PST 3.1.6

Press OK

Select CDMA


3/31

Select CDMA-2 which will bring the check box with it and view will become something like that.

Now select the right COM port, until the bulb below is turned Yellow.


4/31

Now press the button Read from phone which will bring some thing like that.

Press OK

Now change to the TAB CDMA-2


5/31

Here PPP AN has check box, whle User has some thing like [email protected], which you will

copy and paste under the PPP UM, User:[email protected]
mailto:[email protected]:[email protected]


6/31

Then press Write

Now press OK


7/31

You will get another BIG Green Success.


8/31

Now comes the first TAB CDMA, here you will also press the Write Button


9/31

After that one can exit the PST V3.1.6

Press OK

Now disconnect the EVO and then reconnect it again.

You will be presented with some thing like that.


10/31

Press Setting button.


11/31

Here under the UserName we will give the EVO PPP AN; which in our case [email protected]

while the password will be ptcl
mailto:[email protected]:[email protected]


12/31

Now press Apply

Press OK

After disconnecting the EVO, connect it again and press Connect


13/31

And you will be presented with some thing like that, this is to confirm that EVO is configured OK, and it

is working.

Now connect EVO to the Business in a Boxand Ethernet port should be connected withthe LAN port on BIB ~ Ethernet port on laptop,


14/31

Now select the Obtain an IP address automatically.

Now ping the 192.168.1.1, the default IP from the Laptop.


15/31

Now typehttp://192.168.1.1/in address bar of the browser, here the login information should be as

under.

Login: admin

Password; admin

One should be treated with something like that.

Now step # 1

Go to Menu, Management>Update Software
http://192.168.1.1/http://192.168.1.1/http://192.168.1.1/http://192.168.1.1/


16/31

Tools -- Update Software

Step 1:Obtain an updated software image file from your ISP.

Step 2:Enter the path to the image file location in the box below or click the "Browse" button to locate

the image file.

Step 3:Click the "Update Software" button once to upload the new image file.

NOTE: The update process takes about 180 seconds to complete, and your DSL Router will reboot.

Here browse to the firmware file (6.78 Mb file) AVS920W_PTCL_A_0_33_V1.1.14.img and press Update

Software


17/31


18/31

Press OK

Step # 2

Now go to the Advanced Setup>WAN Services>

Wide Area Network (WAN) Service Setup

Choose Add, or Remove to configure a WAN service over a selected interface.You can add 16WAN services at best.

ETH and PTM/ATM service can not coexist.

Interface Description Type Vlan8021p VlanMuxId ConnId Igmp NAT Firewall Remove Edit

ppp0 pppoe_0_0_33 PPPoE N/A N/A N/A Disabled Enabled Enabled

Now press Add button

WAN Service Interface Configuration

Select a layer 2 interface for this service

Note: For ATM interface, the descriptor string is (portId_vpi_vci)

For PTM interface, the descriptor string is (portId_high_low)


19/31

Where portId=0 --> DSL Latency PATH0

portId=1 --> DSL Latency PATH1

portId=4 --> DSL Latency PATH0&1

low =0 --> Low PTM Priority not setlow =1 --> Low PTM Priority set

high =0 --> High PTM Priority not sethigh =1 --> High PTM Priority set

Select 3g and press Next


20/31

Here fields should be filled as under,

APN: should clear the text in this box

3G PhoneNum: #777

PPP Username:[email protected]

PPP Password:ptcl

Enable FireWall: Uncheck

Enable NAT: Check

The press Apply
mailto:[email protected]:[email protected]:[email protected]:[email protected]


21/31


22/31

While the Device Info>WAN should show the newly configured WAN, kindly note down the IPv4 Address

in front of connected WAN, as in this case 10.18.16.98, is unique and static IP, and when one will call the

HBL NOC, one should let them know about the WAN IP.

Step # 3

Enabling Services of BIB

Go to Management>Access Control>Services


23/31

Select all of the services and press Save/Apply

Step # 4

Disable Wireless and DHCP

Go to the Wireless> and follow these instructions,

1. Click Basic tab under Wireless option from left toolbar.

2. Uncheck Enable Wireless option

3. Click Apple/Save

Wireless -- Basic

This page allows you to configure basic features of the wireless LAN interface. You can enable or disable

the wireless LAN interface, hide the network from active scans, set the wireless network name (also

known as SSID) and restrict the channel set based on country requirements.Click "Apply/Save" to configure the basic wireless options.


24/31

Uncheck all of them and press Apply/Save

Now go to the Advanced Setup>LAN option and provide the LAN IP, which in our case is provided by HBL

under the heading of CPE in the provided Excel sheet.


25/31

Select the option of Disable DHCP Server, and then press Apply/Save

Now press OK.

Now go to the LAN settings of the laptop again and set the IP from range of 10.30.234.1xx, as IP s hould

be of the same range/subnet as one given on the LAN port of the BIB.


26/31

Press OK


27/31


28/31

Now press Add.

NAT -- Virtual Servers

Select the service name, and enter the server IP address and click "Apply/Save" to forward IP

packets for this service to the specified server. NOTE: The "Internal Port End" cannot be

modified directly. Normally, it is set to the same value as "External Port End". However, if you

modify "Internal Port Start", then "Internal Port End" will be set to the same value as "InternalPort Start".

Remaining number of entries that can be configured:32

Use Interface: 3g/ppp1

Select a Service: Telnet Server

Server IP Address: This IP is provided by the HBL under the heading of SSG, which in our case will be

10.30.234.41


29/31

Press Apply/Save

Press OK


30/31

Now same step should be followed with another service, press Add

Use Interface: 3g/ppp1

Select a Service: IPSEC

Server IP Address: 10.30.234.41


31/31

Press Apply/Save

Now one has to connect the Ethernet port of BIB with the first available with the Juniper LAN port, and

should call the HBL NOC, to check whether the BIB box can be accessed.

Note: Take care to remember the WAN IP on 3g, and the Ethernet port connected with the SSG 20

hardware.

configuring the evo + bib

Documents