10*The above specifi cations are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.
CNC plasma plate and pipe cutting system PlasmasonicCut, write, mark and perforate - all with one machine
60 mm (2.4”) St37 steel
High Precision drilling in 4 mm (0.16”) St37 steel
Various patterns
Sample tube cutting unit with standard cutting software
Bevel in 12 mm (0.47”) St37 steel
0.8 mm (0.03”) stainless steel
▀ The system design ensures smooth operation, even under tough conditions.
▀ The cutting head holder is magnetic, which allows rapid changes and avoids damage to the cutting head in the case of collision.
▀ Multiple plasma and oxy-acetylene cutting heads are optional. The controller allows the use of up to 4 cutting head-carriers (plasma and oxy-acetylene cutting heads with independent height adjustment), in any combination.
The Plasmasonic series meets the highest standards of productivity, reliability and automation. Includes advanced CNC control with automatic parameter database and gas control. Combines plasma, oxy-fuel, and pipe cutting in the same machine. 5-axis head for weld preparation.
11
Fab
ricat
ing
Saw
ing
Grin
din
gD
rillin
g/B
orin
gM
illin
gTu
rnin
g
*The above specifi cations are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.
Cut
ting
Lase
r • W
ater
jet •
Plasm
a •
EDM
3000
2500
2000
1500
1000
500
500 1000 1500 2000 CUTTING LENGTH (m)
PIERCINGNUMBER F:2800 mm/min.
Sheet Thickness: 10 mmISO 9014 VERTICAL OR ANGULAR TOLERANCE
RANGE Vertical or angular tolerance (mm)
Range 1 0,05 mm + 0,003 x sheet thickness mm
Range 2 0,15 mm + 0,007 x sheet thickness mm
Range 3 0,4 + 0,01 x sheet thickness mm
Range 4 0,8 + 0,02 x sheet thickness mm
Range 5 1,2 mm + 0,035 x sheet thickness mm
ISO 9013
RANGE 4RANGE 3
CUTTING LENGTH (m)1000 2000
F:2600 mm/min.Sheet Thickness: 10 mm130 Ampere
130 REQUIRED CUTTING QUALITY
2000
1500
1000
500
100 200 300 400 500 600 700 800 900 CUTTING LENGTH (m)
PIERCINGNUMBER
F:2100 mm/min. (83“/min)Sheet Thickness: 20 mm (0.8“) ISO 9013
RANGE 4
RANGE 3
CUTTING LENGTH (m)300 900
F:2100 mm/min. (83“/min)Sheet Thickness: 20 mm (0.8“)260 Ampere
260 REQUIRED CUTTING QUALITY
PP260 Electrode and Nozzle Required Life Time Chart
PP130 Electrode and Nozzle Required Filfe Chart
Shield CapShield
Gas Ring Gas Di�usor
Electrode Main BodyNozzle
Low consumable prices with proven long life
Specifi cationsPlasmasonic 3015 Plasmasonic 4020 Plasmasonic 6030 Plasmasonic 12030
6 x 10’ 6 x 13’ 10 x 20’ 10 x 40’
Table length mm 3000 (117”) 4000 (156”) 6000 (234”) 12000 (468”)
Table width mm 2000 (79”) 2000 (79”) 3000 (117”) 3000 (117”)
Max. cutting speed mm/min 7500 (292”/min) 9800 (382”/min)
Max. positioning speed mm/min 15000 (580”/min)
Repeatability mm ±0.05 (0.02”)
Positioning accuracy mm ±0.1 (0.04”)
Plasma specifi cations PP130 PP260
LOW-CARBON STEELSCutting thickness mm 16 (0.6”) 30 (1.2”)
Max. thickness (piercing) mm 25 (1”) 36 (1.2”)
Max. thickness (non-piercing) mm 35 (1.5”) 65 (2.5”)
STAINLESS STEELS
Cutting thickness mm 12 (0.5”) 20 (0.8”)
Max. thickness (piercing) mm 20 (0.8”) 36 (1.4”)
Max. thickness (non-piercing) mm 25 (1”) 65 (2.5”)
Control of gas pressure during cutting Automatic
Gases used (plasma cutting) Oxygen, air, nitrogen, F5, H35
Gases used (oxy-fuel) Oxygen, propane
Standard confi guration ✔ Solid, welded, high quality steel frame ✔ Automatic gas and air pressure
adjustment for plasma and oxy-fuel cutting is done in a control unit
✔ Hand operating unit (allows parameter changes while cutting)
✔ Automatic height control ✔ Double fi lter unit VLP
✔ Automatic workpiece marking ✔ Ergonomic control panel ✔ Robust, stand-alone table with
sectional fume extraction ✔ Import CNC fi les in DIN/ISO
G, DXF and ESSI formats ✔ Design and edit parts with
integrated CAD/CAM program
✔ Automatic nesting software ✔ Retrace-retry function (Reset the
cutting head after a break) ✔ Function for automatic process shutdown
in case of electrode and nozzle break ✔ Automatic look-ahead and feed
regulation for tight radii ✔ Operation manual
12*The above specifi cations are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.
CNC plasma plate and pipe cutting system PlasmasonicCut, write, mark and perforate - all with one machine
▀ Dual AC servo motors precisely drive the bridge from both sides, which means no lag error
▀ User-friendly control panel allows not only the motors but also the source of power, suction and fi ltration systems to be monitored centrally
▀ Plasma cutting machines, which are equipped with our precision fi ne beam plasma generators are able to combine the highest cutting quality with low consumable cost. The fi ne-beam generators PP (Precision Plasma) ensure very fast piercing and high cutting speeds, with an unusually clean and almost perfectly square cutting edge
▀ Our plasma cutting machines are equipped with an automatic CNC-controlled gas mixing console, marking, cutting table equipped with sectional suction, suction unit and particulate fi lter system
▀ The fl at bed machines can be combined with a pipe cutting device
▀ Optional bevel cutting unit for 5 axis operation to produce quick and accurate welding bevels
perfectly square cutting edge pipe cutting device
▀ Optional bevel cutting unit for 5 axis operation to produce quick and accurate welding bevels
▀ Industrial PC, USB port, CD drive, hard drive, TFT Screen
▀ Easy integration into existing network through integrated network card
▀ CNC fi les can be imported in the following formats: ISO ESSI, G codes, DXF
▀ Extensive cutting parameter library
▀ Automatic setting of process parameters by the CNC (Included: gas mixture, gas pressure, regulation of cutting current, selection of feed rates, indication of nozzle/cap combination)
▀ Fast switching of the cutting process from plasma to oxy-fuel cutting and back
▀ NC program can be stopped at any point and then resumed from that point
▀ Override function during processing, in both automatic as well as manual mode
▀ Part rotation
▀ Automatic workpiece orientation
▀ Automatic adjustment of the cutting gap
▀ All relevant machine data and statuses are displayed at a glance
▀ Integrated standard parts library
▀ Editing and designing parts in the integrated CAD/CAM program
▀ High-speed operation
▀ Automatic look-ahead and feed regulation for tight radii
▀ Autonest program is included in the standard software package for optimal sheet usage
▀ Programmable microwebs
Editing and designing parts in the
13
Fab
ricat
ing
Saw
ing
Grin
din
gD
rillin
g/B
orin
gM
illin
gTu
rnin
g
*The above specifi cations are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.
Cut
ting
Lase
r • W
ater
jet •
Plasm
a •
EDM
Optional confi guration ▀ Automatic pipe/profi le cutter
▀ Automatic bevel cutting (Bevel Cut)
▀ Additional plasma cutting heads
▀ Additional oxy-fuel cutting heads
▀ Additional bridge unit
30
28.8 27.6 26.2
30 30
5.423.431.71
20
ISO 9013 Range 310 mm (0.4”) Angle: 2.86°12 mm (0.5”) Angle: 2.48°20 mm (0.8”) Angle: 1.71°
ISO 9013 Range 410 mm (0.4”) Angle: 5.71°12 mm (0.5”) Angle: 4.95°20 mm (0.8”) Angle: 3.43°
ISO 9013 Range 510 mm (0.4”) Angle: 8.81°12 mm (0.5”) Angle: 7.68°20 mm (0.8”) Angle: 5.42°