Konrad ScheiberGeneral Manager
Quality Austria - Trainings, Zertifizierungs und Begutachtungs GmbH,AT-1010 Vienna, Zelinkagasse 10/3
Vienna, 26 February 2019
The current validity of the certificate is documented exclusively on the Internet under http://www.qualityaustria.com/en/cert EAC: 17.2
d530e1fb-084f-49f8-a136-49959b54e354
qualityaustria Reg. No.: 00047/0
CERTIFICATE of the factory production control (FPC)
CPR Number: 1346
In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation or CPR), this certificate applies to the construction product
This certificate attests that all provisions concerning the assessment and verification of constancy of performance described in the Annex ZA of the standard EN 1090 -1:2009+A1:2011 under system 2+ are applied and that the factory production control fulfills the prescribed requirements set out above.
Quality Austria - Trainings,Zertifizierungs und
Begutachtungs GmbH isaccredited according to
the Austrian AccreditationAct by the BMWFW(Federal Ministry of
Science, Research andEconomy).
Quality Austria isaccredited as anorganisation for
environmental verificationby the BMLFUW (Federal
Ministry of Agriculture,Forestry, Environment and
Water Management).
Quality Austria isauthorized by the VDA
(Association of theAutomotive Industry).
For accreditationregistration details please
refer to the applicabledecisions or recognition
documents.
Quality Austria is theAustrian member of IQNet(International Certification
Network).
Quality Austria is themember of ANB (Austrian
Notfied Bodies).
DI Dr. techn. Wolfgang NesitkaSpecialist representative
STEEL STRUCTURES
placed on the market by MCE NYÍREGYHÁZA KFTHU-4400 Nyíregyháza, Tünde utca 10/a, Posta Fiok 212
and produced in the manufacturing plant
MCE NYÍREGYHÁZA KFTHU-4400 Nyíregyháza, Tünde utca 10/a, Posta Fiok 212
Harmonized norm
EN 1090-1:2009+A1:2011
Execution Class(es) Method(s) of Declaration
Steel
EXC 1, EXC 2, EXC 3, EXC 4acc. to
EN 1993-1-1:2005+A1:2014
ZA 3.2, ZA 3.3, ZA 3.4, ZA 3.5acc. to
EN 1090-1:2009+A1:2011
Road and railway bridges, sidewalk constructions, structural steel components, cranes, hall constructions, boiler stands, components for hydraulic steel construction
Validity: This certificate was first issued on 26.02.2019 CPR andwill remain valid as long as the factory production control requirements included in the harmonised standard, used to assess the performance of the declared characteristics,do not change, and the product, and the manufacturing conditions in the plant are not modified significantly.
