Konrad ScheiberGeneral Manager

Quality Austria - Trainings, Zertifizierungs und Begutachtungs GmbH,AT-1010 Vienna, Zelinkagasse 10/3

Vienna, 26 February 2019

The current validity of the certificate is documented exclusively on the Internet under http://www.qualityaustria.com/en/cert EAC: 17.2

d530e1fb-084f-49f8-a136-49959b54e354

qualityaustria Reg. No.: 00047/0

CERTIFICATE of the factory production control (FPC)

CPR Number: 1346

In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation or CPR), this certificate applies to the construction product

This certificate attests that all provisions concerning the assessment and verification of constancy of performance described in the Annex ZA of the standard EN 1090 -1:2009+A1:2011 under system 2+ are applied and that the factory production control fulfills the prescribed requirements set out above.

Quality Austria - Trainings,Zertifizierungs und

Begutachtungs GmbH isaccredited according to

the Austrian AccreditationAct by the BMWFW(Federal Ministry of

Science, Research andEconomy).

Quality Austria isaccredited as anorganisation for

environmental verificationby the BMLFUW (Federal

Ministry of Agriculture,Forestry, Environment and

Water Management).

Quality Austria isauthorized by the VDA

(Association of theAutomotive Industry).

For accreditationregistration details please

refer to the applicabledecisions or recognition

documents.

Quality Austria is theAustrian member of IQNet(International Certification

Network).

Quality Austria is themember of ANB (Austrian

Notfied Bodies).

DI Dr. techn. Wolfgang NesitkaSpecialist representative

STEEL STRUCTURES

placed on the market by MCE NYÍREGYHÁZA KFTHU-4400 Nyíregyháza, Tünde utca 10/a, Posta Fiok 212

and produced in the manufacturing plant

MCE NYÍREGYHÁZA KFTHU-4400 Nyíregyháza, Tünde utca 10/a, Posta Fiok 212

Harmonized norm

EN 1090-1:2009+A1:2011

Execution Class(es) Method(s) of Declaration

Steel

EXC 1, EXC 2, EXC 3, EXC 4acc. to

EN 1993-1-1:2005+A1:2014

ZA 3.2, ZA 3.3, ZA 3.4, ZA 3.5acc. to

EN 1090-1:2009+A1:2011

Road and railway bridges, sidewalk constructions, structural steel components, cranes, hall constructions, boiler stands, components for hydraulic steel construction

Validity: This certificate was first issued on 26.02.2019 CPR andwill remain valid as long as the factory production control requirements included in the harmonised standard, used to assess the performance of the declared characteristics,do not change, and the product, and the manufacturing conditions in the plant are not modified significantly.