6 Days Training
Class ParticipantsParticipants who wish to
apply for the API Exam should
have at least 3 years of
experience at a petro-,
chemical- or industrial facility
and have at least 1 year of
inspection experience.
However, participants who
do not meet this requirement
are also welcomed to attend
this Training to further their
knowledge in the related
areas.
E-03-07, Block E, Jalan Prima 5/3, Persiaran Prima Utama, Taman Puchong Prima,
47100 Puchong, Selangor Darul Ehsan. Tel: 03-8061-4606 Fax: 03-8061-4506
API Exam ApplicationThe scheduled dates for API 580 Certification Examination is
as below:
Examination Dates: _____________
Submissions to API: _____________
API 580 Risk Based Inspection
Date: ______________ Venue: Kuala Lumpur
Training DescriptionThe training is based on API RP 580 Risk-Based
Inspection and API Publication 581, Base Resource
Document. The training first explains feasible means
and alternatives for achieving a successful RBI program
without undue complications. This training deals with
RBI framework and methodology in a simple straight
forward manner to establish and implement a risk-
based inspection program best suited for the company
objectives. Its utility is based on the premise that a few
vital equipments in a process plant contribute a majority
of the risk. Consequently, if these few equipments can
be identified, then testing and inspection can be
focused on them rather than several low-risk items. RBI
helps to prioritize their equipment for inspection,
optimize inspection methods and frequencies, and
develop effective inspection plan commensurate with
the risk contribution and equipment condition.
Training ObjectivesIntroduction to the basic concept of Risk-Based
Inspection and the basis for the API 580 RBI
program and methodology .
Understand the purpose, scope, and examination of
the critical steps in the RBI process.
Overview of deterioration mechanisms and failure
modes affecting the plant equipment Introduction
to the risk-based inspection priority matrix and the
means to utilize its results in determining inspection
priorities.
Introduction to the ISO-risk plot and its use,
especially in combination with the risk-based
inspections priority matrix
Discussion of risk-based inspection documentation
and record-keeping needs.
Understanding of the basic concepts of risk
acceptance, risk assessment, risk perception, risk
mitigation and managing residual risk .
Event tree analysis, fault tree analysis, qualitative
and quantitative assessment and evolution of
inspection approaches.
Understand reassessments and means for updating
RBI.
Who Should JoinIndividuals who are responsible for implementing risk-
based inspection programs within their own company or
plant facility. Mechanical integrity, equipment reliability,
and inspection personnel who are responsible for
maintaining the serviceability of process plant equipment
based on a cost-effective inspection program.
Minimum RequirementsCurrent certification as either API 510, API 570, or
API653 inspector.
Successful completion of the supplemental inspection
certification examination by at least 70%, based on
fixed pass point.
The objective of this optional Supplemental Inspection
Certification program is to provide documented evidence
of advanced (above the basic core API 510, 570, 653
examinations) knowledge and expertise in the area of Risk
Based Inspection (RBI) based on the information contained
in API RP 580.
6 Days Training
Participants should bring to class: a calculator, a straight edge (or triangle), pencils, highlighters, lots of questions, and a
“CAN-DO” attitude.
Date: ______________ Venue: Kuala Lumpur
Training Outline
Module 1
Introduction, what is RBI, scope of RBI, purpose & utility of RBI
Common definition RBI
Definition of risk, relative risk v/s absolute risk
Relationship between inspection & risk
Types of RBI assessments
Qualitative , quantitative and semi- quantitative approaches
Module 2
Planning RBI assessment
Selecting type of RBI assessment
Identifying deterioration mechanisms
Introduction to qualitative analysis
Likelihood category, consequence category
Step-by step method for qualitative analysis
Understanding the damage factors
Determine likelihood category
Determine consequence category and risk category
Preparation of risk matrix, analysis and conclusion
Module 3
Introduction to quantitative analysis
Flammable effects, Toxic effects
Business interruption effects
Estimation of release rate and post leak response
Risk evaluation, risk-weighted consequences
API 580 Risk Based Inspection
Module 4
Introduction to semi quantitative approach
Likelihood analysis, consequence analysis
Risk management post RBI analysis
Inspection strategies post RBI analysis
Module 5
Inspection effectiveness
Optimizing inspection methods and
frequencies
Risk mitigation and follow-up
Re-assessment and updating RBI
Final Quiz
Feedback and concluding Session
Codes For SaleCode books are available at Techstreet , www.techstreet.com or
Global Eng Docs , www.global.ihs.com
E-03-07, Block E, Jalan Prima 5/3, Persiaran Prima Utama, Taman Puchong Prima,
47100 Puchong, Selangor Darul Ehsan. Tel: 03-8061-4606 Fax: 03-8061-4506
6 Days Training
Instructor
� Corrosion Assessment, Protection & Material Selection
� Condition Assessment of Structures and Components
� Welding Consultancy/Inspection/Witnessing
� Non-destructive Testing (MT, PT, UT, RT,& ET)
� Fiberscopic Inspection
� Calibration & Mechanical Testing
Ho Bee Leong
Limited Attendees
The training has limited seats up to 25 participants to ensure maximum learning and experience for all participants.
Certificate of Attendance
Every participants will receive a Certificate of Attendance bearing the signatures of the Trainer upon successful
completion of the training. This certificate is proof of the participants’ continuing professional development.
Interactive Training
The training program is designed to be interactive to ensure deeper and wider knowledge and experiences are shared
among participants and trainer. This will enhance the understanding and appreciation towards the subject matter.
Quality Training Materials
Training material will be provided based on the trainer’s notes. This material will be used throughout the training and it
will be invaluable source of reference for future use.
The personnel developing and conducting this training is Mr Ho Bee
Leong. He works in the Oil and Gas industries with related
disciplines for more than 15 years and also has more than 9 years
of experience in developing and conducting API ICP training.
Countries in which these trainings were held include Singapore,
Philippines, Indonesia and China.
He is qualified for ICP 510, 570, 580 and 653 with certificate
numbers: ICP 510 – 29563; ICP 570 – 24410 and ICP 653 – 31253.
� Asset Integrity and Risk Management Services (ARMS)
� Plant Maintenance and Engineering
� Materials Selection
� Risk-based Inspection (RBI)
� Failure Analysis
� Six Sigma (Green Belt)
� Metallurgy and Chemical Analysis
Summary of Professional Experiences:
Date: ______________ Venue: Kuala Lumpur
E-03-07, Block E, Jalan Prima 5/3, Persiaran Prima Utama, Taman Puchong Prima,
47100 Puchong, Selangor Darul Ehsan. Tel: 03-8061-4606 Fax: 03-8061-4506
API 580 Risk Based Inspection
Training Package Price (RM)
Standard Price 4,950.00
Early Bird Offer 4,750.00
Team Discount for 3 or more participants 4,550.00
I agree to SPEKTRA’s payment terms and cancellation policy.
Signature: Date:
Please tick if participant require:
Hotel accommodation
REGISTRATION
Note:
To enjoy the offer, full payment shall be made before the deadline.
Prices cover 2 tea breaks and buffet lunch, training materials and copies of the required CODES.
Important: Please note that registration without payment will incur a RM200 administration fee
Participant Details
Name: Mr Mrs Ms Dr
Contact Number: Email:
Job Title: Dept:
Head of Dept:
Invoice Details
Attention Invoice to:
Contact Number: Fax No:
Company: Industry:
Address:
Email:
Finance Department Contact Details
Name:
Contact Number:
Email:
Job Title:
Payment Methods
By Cheque/Bank Draft: Made payable to SPEKTRA NIAGA SDN BHD
By Direct Transfer: Please quote invoice number(s) on remittance advice.
Account details: MAYBANK 512-772-301-575 SPEKTRA NIAGA SDN BHD
Note:
All bank charges to be borne by payer. Please ensure that SPEKTRA NIAGA SDN BHD receives the
invoiced amount.
To register,
fill in the
form and fax
to us
TODAY!
Program Director
Name: Zulkiflee Ngah
Email: [email protected]
Tel: 03-8061-4606 Fax: 03-8061-4506
Cancellation Policy
Participant may substitute delegates at
any time as long as reasonable advance
notice is given to SPEKTRA. For any
cancellation received in writing not less
than fourteen (14) working days prior to
the training, participant will receive a
full refund less a RM 200 administration
fee and any related bank or credit card
charges. Participant who cancel less
than fourteen (14) working days of the
training, or who do not attend the
training, are liable to pay the full
training fee and no refunds will be
granted.
Disclaimer
Please note that trainers and topics
were confirmed at the time of
publishing; however, SPEKTRA may
necessitate substitutions, alterations or
cancellations of the trainers or topics. As
such, SPEKTRA reserves the right to
change or cancel any part of its
published program due to unforeseen
circumstances. Any substitutions or
alterations will be updated on our
webpage as soon as possible.
API 510 API 570 AP1 653 API 580 QUTE
Training Date:
______________