Download - 5-MLT350_030826_GB
-
MLT Series
Desiccant Dehumidifier
Product Description The MLT350 desiccant dehumidifier is designed to efficientlydehumidify in low moisture applications. It is equipped with aninternally sealed rotor unit. The rotor casing is constructed ofdurable thermoset plastic and contains isolated sections thatprovide a precise balance for dehumidification, reactivation, andheat recovery airflows. Its rugged formed metal frame and accesspanels are produced from corrosion resistant Aluzink.The electrical control system conforms to EN 60204 (IEC204)standards. The electrical components are mounted on busbars andare constructed of halogen-free plastic. The electrical system isdesigned for up to 690V and 60C. MLT Series dehumidifiersconform to both harmonised European Standards and to CEmarking specifications.
Munters Rotor TechnologyThe desiccant rotor is manufactured from a corrugated compositematerial that is highly effective at attracting and holding watervapour. Every Munters dehumidifier applies a unique rotortechnology. Airflows, air conditions, rotor sections, and rotorrotation speeds are optimised for specific applications. Aninnovative control system maximises the units energy efficiency. A characteristic of the MLT Series rotor technology is an extrarotor sector which provides high capacity, while simultaneouslyrecovering heat, thereby effectively reducing the electrical powerrequirement.
PRODUCT INFORMATION
MLT350Features
Requires minimal floor area.
High airflow capacity.
Minimal energy consumption.
Unique plastic rotor casing 100 %corrosion resistance.
Dehumidifies efficient down to-20C.
Interchangeable front and backpanels - easier to install.
The Humidity Expert
-
Model MLT350Diagram measurements are for referenceonly.
Scaled and dimensioned AutoCADdrawings are available in MuntersDryCap program.
MLMunters
420
A
B
C
D
E
Width (A) 513 mm
Depth (B) 410 mm
Height (C) 910 mm
Diam. (D) 125 mm
Diam. (E) 80 mm
Weight 53 kg
Technical Specification
Process airRated airflow (m/h) 350Available static pressure (Pa) 200
Reactivation airRated airflow (m/h) 67Available static pressure (Pa) 200
Total power,voltage and current (amps/phase)Total power(kW) 2,05220V 1-50Hz (A) 9,9230V 1-50Hz (A) 9,5240V 1-50Hz (A) 9,2
Miscellaneous dataOperating temperature (C) -20/+40Max noise level unducted (dBA) 80Air filter standard G3IEC protective class (unit) IP44IEC protective class (electrical panel) IP54
DehumidificationCapacityApproximate capacity in kg/h atdifferent inlet process air relativehumidity, % RH.
Dehumidification Capacity, kg/h
0
0,4
0,8
1,2
1,6
2,0
10 0 10 20 30
60% RH
80% RH
40% RH
Process Air Temperature, oC
Options Hours run counter (monitors the
number of hours the system isoperational)
Humidity control system with alarmand displayRefer to the RH98 product datasheet
Air cooled condenserRefer to the MLT350L product datasheet
Stainless steel sheet metal casing
DH/MEAPGB-0019-05/06
.
AUSTRALIATel +61 2 8843 1588
AUSTRIATel +43 1 6164298-0
BELGIUMTel +32 3 458 24 34
BRAZILTel +55 41 3317 5050
CANADATel +1 905 8585894
CHINATel +86 10 804 18000
DENMARKTel +45 4495 3355
FINLANDTel +358 9 8386 030
FRANCETel +33 1 3411 5757
GERMANYTel +49 40 73416-01
INDIATel +91 20 305 22 520
ITALYTel +39 0183 521377
JAPANTel +81 3 5970 0021
KOREATel +82 2 761 8701
MEXICOTel +1 52 722 270-4029
NETHERLANDSTel +31 172 43 32 31
POLANDTel +48 58 320 01 00
SINGAPORETel +65 6744 6828
SOUTH AFRICATel +27 11 997 2000
SPAINTel +34 91 640 09 02
SWEDENTel +46 8-626 6300
SWITZERLANDTel +41 52 3438886
THAILANDTel +66 2 642 2670-3
TURKEYTel +90 212 286 1838
UNIT. ARAB EMIRATESTel +971 4 881 3026
UNITED KINGDOMTel +44 8708 505 202
UNITED STATESTel +1 978 241 1100
VIETNAMTel +84 8 825 6838 www.munters.com
The Humidity Expert