MLT Series

Desiccant Dehumidifier

Product Description The MLT350 desiccant dehumidifier is designed to efficientlydehumidify in low moisture applications. It is equipped with aninternally sealed rotor unit. The rotor casing is constructed ofdurable thermoset plastic and contains isolated sections thatprovide a precise balance for dehumidification, reactivation, andheat recovery airflows. Its rugged formed metal frame and accesspanels are produced from corrosion resistant Aluzink.The electrical control system conforms to EN 60204 (IEC204)standards. The electrical components are mounted on busbars andare constructed of halogen-free plastic. The electrical system isdesigned for up to 690V and 60C. MLT Series dehumidifiersconform to both harmonised European Standards and to CEmarking specifications.

Munters Rotor TechnologyThe desiccant rotor is manufactured from a corrugated compositematerial that is highly effective at attracting and holding watervapour. Every Munters dehumidifier applies a unique rotortechnology. Airflows, air conditions, rotor sections, and rotorrotation speeds are optimised for specific applications. Aninnovative control system maximises the units energy efficiency. A characteristic of the MLT Series rotor technology is an extrarotor sector which provides high capacity, while simultaneouslyrecovering heat, thereby effectively reducing the electrical powerrequirement.

PRODUCT INFORMATION

MLT350Features

Requires minimal floor area.

High airflow capacity.

Minimal energy consumption.

Unique plastic rotor casing 100 %corrosion resistance.

Dehumidifies efficient down to-20C.

Interchangeable front and backpanels - easier to install.

The Humidity Expert

Model MLT350Diagram measurements are for referenceonly.

Scaled and dimensioned AutoCADdrawings are available in MuntersDryCap program.

MLMunters

420

A

B

C

D

E

Width (A) 513 mm

Depth (B) 410 mm

Height (C) 910 mm

Diam. (D) 125 mm

Diam. (E) 80 mm

Weight 53 kg

Technical Specification

Process airRated airflow (m/h) 350Available static pressure (Pa) 200

Reactivation airRated airflow (m/h) 67Available static pressure (Pa) 200

Total power,voltage and current (amps/phase)Total power(kW) 2,05220V 1-50Hz (A) 9,9230V 1-50Hz (A) 9,5240V 1-50Hz (A) 9,2

Miscellaneous dataOperating temperature (C) -20/+40Max noise level unducted (dBA) 80Air filter standard G3IEC protective class (unit) IP44IEC protective class (electrical panel) IP54

DehumidificationCapacityApproximate capacity in kg/h atdifferent inlet process air relativehumidity, % RH.

Dehumidification Capacity, kg/h

0

0,4

0,8

1,2

1,6

2,0

10 0 10 20 30

60% RH

80% RH

40% RH

Process Air Temperature, oC

Options Hours run counter (monitors the

number of hours the system isoperational)

Humidity control system with alarmand displayRefer to the RH98 product datasheet

Air cooled condenserRefer to the MLT350L product datasheet

Stainless steel sheet metal casing

DH/MEAPGB-0019-05/06

.

AUSTRALIATel +61 2 8843 1588

AUSTRIATel +43 1 6164298-0

BELGIUMTel +32 3 458 24 34

BRAZILTel +55 41 3317 5050

CANADATel +1 905 8585894

CHINATel +86 10 804 18000

DENMARKTel +45 4495 3355

FINLANDTel +358 9 8386 030

FRANCETel +33 1 3411 5757

GERMANYTel +49 40 73416-01

INDIATel +91 20 305 22 520

ITALYTel +39 0183 521377

JAPANTel +81 3 5970 0021

KOREATel +82 2 761 8701

MEXICOTel +1 52 722 270-4029

NETHERLANDSTel +31 172 43 32 31

POLANDTel +48 58 320 01 00

SINGAPORETel +65 6744 6828

SOUTH AFRICATel +27 11 997 2000

SPAINTel +34 91 640 09 02

SWEDENTel +46 8-626 6300

SWITZERLANDTel +41 52 3438886

THAILANDTel +66 2 642 2670-3

TURKEYTel +90 212 286 1838

UNIT. ARAB EMIRATESTel +971 4 881 3026

UNITED KINGDOMTel +44 8708 505 202

UNITED STATESTel +1 978 241 1100

VIETNAMTel +84 8 825 6838 www.munters.com

The Humidity Expert