DRAWING NO.

DO NOT SCALE DRAWING FOR MACHINING DIMENSIONS

SCALE

HYDRAULICCYLINDER, INC.

3020 Lee Highway Athens, Tennessee 37303

APPROVED

CHECKED

DRAWN BYMACHINING TOLERENCES

UNLESS OTHERWISE SPECIFIEDONE PLACE .X = ±.1

TWO PLACES .XX = ±.03THREE PLACES .XXX = ±.010

FOUR PLACES .XXXX = ±.0010ALL ANGLES = ±2°

BREAK ALL SHARP EDGES .010 X 45°

NOTES:1. SEAL KIT NUMBER: 43SA.2. MAX. OPERATING PRESSURE: 2500 PSI.3. PAINT NUMBER: UN1263 RED OXIDE PRIMER.4. OIL CAPACITY (GAL): 1.37 RETRACTED; 4.50 EXTENDED.5. CYLINDER WEIGHT (LBS): APPROX. 128

4398TR

TELESCOPICCYLINDER ASSEMBLY

1.88O

O 1.266

42.19 REF.

1.12

8.81

1.7491.745 2.00

8.69 ± .12 RETRACTED96.42 ± .24 STROKE105.11 ± .36 EXTENDED

2.00

.88

19.56 1/2"-14 NPT

THIS PRINT CONTAINS CONFIDENTIALINFORMATION AND IS THE PROPERTY OF

SOUTHERN HYDRAULIC CYLINDER, INC. ANDIS NOT TO BE COPIED OR REPRODUCEDWITHOUT THE EXPRESSED CONSENT OFSOUTHERN HYDRAULIC CYLINDER, INC.

THESE ENGINEERING DRAWINGS HAVE BEEN PREPARED BY SOUTHERN HYDRAULIC CYLINDER, INC. ("SHC") BASEDON PARTICULAR INFORMATION AND DESIGN SPECIFICATIONS PROVIDED BY THE CUSTOMER. SHC ASSUMES NORESPONSIBILITY FOR SUCH PARTICULAR INFORMATION OR DESIGN SPECIFICATIONS PROVIDED AND ASSUMES NORESPONSIBILITY FOR ANY SPECIFIC APPLICATION OF THE PRODUCT RESULTING FROM THE DESIGN SPECIFICATIONS.CUSTOMER SHALL INDEMNIFY SHC AGAINST ANY CLAIM BY ANY PARTY FOR DAMAGES BASED ON ANY ERROR,OMMISSION OR FAULT IN THE PARTICULAR INFORMATION OR DESIGN SPECIFICATIONS PROVIDED BY THE CUSTOMER.

O 5.755.62

O 5.00 O 4.00 O 3.00 O 2.00