Mayrwiesstr. 255300 Hallwang
Tel.: +43 (0)662 - 66 15 56 Fax: +43 (0)662 - 66 09 63
FUSION-SPLICE
Pre
ise
sind
Hän
dler
-Net
topr
eise
in E
uro
exkl
. Mw
St.
A
lle A
ngab
en o
hne
Gew
ähr.
Dru
ck- u
nd S
atzf
ehle
r vor
beha
lten.
#1000-0072
ARC FUSION SPLICER3 ACHSEN
NEW PRODUCT DECEMBER 2014
3-axis alignment (X,Y,Z).
Embedded PAS (Profile Alignment System).
Specific bolsters to use with fusion-spliced connectors.
Fully automated operation.
User-friendly menus.
Highlights Product Range
REF. DESCRIPTION EAN 13
232101 F.O. KIT FUSION SPLICER 8424450169124
232110 F.O. KIT FUSION MINI-SPLICER 8424450175644
Make a perfect splice within 9 seconds, thanks to their High-Speed Digital Image Processing and its High Precision 3-axis alignment.
To speed up the splicing, it features an Automatic Splice function so the process will begin as soon as the lid is closed.
FIBRE OPTICS EqUIPMENT DESIgNED FOR PROFESSIONAlS
ARC FUSION SPLICERS3-AXIS ALIGNMENT
Ref. 232101 & 232110
NEW PRODUCT DECEMBER 2014
3-axis alignment (X,Y,Z).
Embedded PAS (Profile Alignment System).
Specific bolsters to use with fusion-spliced connectors.
Fully automated operation.
User-friendly menus.
Highlights Product Range
REF. DESCRIPTION EAN 13
232101 F.O. KIT FUSION SPLICER 8424450169124
232110 F.O. KIT FUSION MINI-SPLICER 8424450175644
Make a perfect splice within 9 seconds, thanks to their High-Speed Digital Image Processing and its High Precision 3-axis alignment.
To speed up the splicing, it features an Automatic Splice function so the process will begin as soon as the lid is closed.
FIBRE OPTICS EqUIPMENT DESIgNED FOR PROFESSIONAlS
ARC FUSION SPLICERS3-AXIS ALIGNMENT
Ref. 232101 & 232110
Fibre Optics equipment designed for professionals
Mayrwiesstr. 255300 Hallwang
Tel.: +43 (0)662 - 66 15 56 Fax: +43 (0)662 - 66 09 63
FUSION-SPLICE
Pre
ise
sind
Hän
dler
-Net
topr
eise
in E
uro
exkl
. Mw
St.
A
lle A
ngab
en o
hne
Gew
ähr.
Dru
ck- u
nd S
atzf
ehle
r vor
beha
lten.
#1000-0072
televescorporationteleves.com [email protected]
Common features (for Ref. 232101 and 232110)
¬ Eliminate the possibility of failures on the splicing process.
¬ Easy-to-use equipment for those beginning to work with Fibre Optics.
¬ Interchangeable bolsters to use with fibres or fusion-spliced connectors.
¬ LED lighting over the fusion point, for a better positioning of the fibres.
¬ 4 Fusion modes: (Auto, Calibrated, Standard, and Special)
Specific features for Ref. 232101
¬ 5.7" LCD screen to display the resulting fusion in a clearer way.
¬ Robust transport case, with available space to include other tools.
Specific features for Ref. 232110
¬ Small size and weight, with all the features of a “regular” fusion splicer.
¬ Specially designed to use it in hard-to-reach areas and works-at-height.
¬ Automatic arc compensation: embedded atmospheric pressure/temperature sensors to adequate the electric arc discharge.
¬ Small-sized case for an easy and practical transport.
¬ Low consumption mode.
¬ Automatic detection of most common faults.
¬ Indication of both Clad/Core deviation and fibre cut angle.
Main features
3-AXIS ALIGNMENTARC FUSION SPLICERS
z 232110
z 232101
Transport case.
Fibre Optic cleaver (Ref. 2323).
High precision stripper (Ref. 2324).
Mains lead and power-line adapter.
Container to hold the rest of chopped fibers or other utensils.
Brush for cleaning lenses and mirrors.
Plastic clamp.
Holder to cool down the fibre protective sleeve once applied.
Set of interchangeable bolsters.
Spare set of electrodes.
Protective cover for the LCD screen (only Ref. 232101)
Battery.
Included accessories
pAdditional bolster
q Additional bolster
pInstalled bolster
zInstalled bolster
televescorporationteleves.com [email protected]
Common features (for Ref. 232101 and 232110)
¬ Eliminate the possibility of failures on the splicing process.
¬ Easy-to-use equipment for those beginning to work with Fibre Optics.
¬ Interchangeable bolsters to use with fibres or fusion-spliced connectors.
¬ LED lighting over the fusion point, for a better positioning of the fibres.
¬ 4 Fusion modes: (Auto, Calibrated, Standard, and Special)
Specific features for Ref. 232101
¬ 5.7" LCD screen to display the resulting fusion in a clearer way.
¬ Robust transport case, with available space to include other tools.
Specific features for Ref. 232110
¬ Small size and weight, with all the features of a “regular” fusion splicer.
¬ Specially designed to use it in hard-to-reach areas and works-at-height.
¬ Automatic arc compensation: embedded atmospheric pressure/temperature sensors to adequate the electric arc discharge.
¬ Small-sized case for an easy and practical transport.
¬ Low consumption mode.
¬ Automatic detection of most common faults.
¬ Indication of both Clad/Core deviation and fibre cut angle.
Main features
3-AXIS ALIGNMENTARC FUSION SPLICERS
z 232110
z 232101
Transport case.
Fibre Optic cleaver (Ref. 2323).
High precision stripper (Ref. 2324).
Mains lead and power-line adapter.
Container to hold the rest of chopped fibers or other utensils.
Brush for cleaning lenses and mirrors.
Plastic clamp.
Holder to cool down the fibre protective sleeve once applied.
Set of interchangeable bolsters.
Spare set of electrodes.
Protective cover for the LCD screen (only Ref. 232101)
Battery.
Included accessories
pAdditional bolster
q Additional bolster
pInstalled bolster
zInstalled bolster
ARC FUSION SPLICER3 ACHSEN
Mayrwiesstr. 255300 Hallwang
Tel.: +43 (0)662 - 66 15 56 Fax: +43 (0)662 - 66 09 63
FUSION-SPLICE
Pre
ise
sind
Hän
dler
-Net
topr
eise
in E
uro
exkl
. Mw
St.
A
lle A
ngab
en o
hne
Gew
ähr.
Dru
ck- u
nd S
atzf
ehle
r vor
beha
lten.
#1000-0072televescorporationteleves.com [email protected]
Technical features
3-AXIS ALIGNMENTARC FUSION SPLICERS
Reference 232101 232110
General
Average loss per splice 0,02dB (SM) / 0,01dB (MM) / 0,04dB (DS/NZDS)
Average time per splice 9 seconds (SM standard)
Average time for the heat-shrink sleeve heating 30 seconds (adjustable)
Splice 13 Pre-configurable programmes and 27 user-adjustable
lighting point lED for the splicing (for using in low light areas)
Embedded oven to apply heat-shrink sleeves 9 Pre-configurable programmes and 15 user-adjustable
Fusion modes Auto, Calibrate, Standard, Special
Fibre alignment 3-axis via Core, Clad, Meticulous and Manual (PAS incorporated)
Usable fibres
SM g.652 / g.657 (Single mode)
MM g.651 (Multi mode)
DS g.653
NZDS g.655
Screen 5,7” colour lCD 3,5” colour lCD
DisplayHorizontal 300 zoom magnification for X,Y and X/Y 200 zoom magnification for X,Y and X/Y
Vertical 150 zoom magnification for X/Y 50 magnification zoom for X/Y
Parameter settings
Duration of the heating period P PCutting angle limit P Ploss limit P PCleaning arc P PManual reinforcement P PTensile strength test P PFibre type P PSplice mode Manual/Automatic
languages English, French, german, Italian, Portuguese, Russian, Spanish, Chinese, Corean and Vietnamese
Monitor position O PPower saver mode O PTime/Date settings P PSensors value (real time) O PMenu locking P PContador de arcos P PReplace electrodes function O PStabilize electrodes function P PReset splice counter P PAutomatic detection of dust over the lenses O PDatalog
Splice records Up to 4000 records
Powering
Mains 100 - 240Vac/ 50 – 60Hz
BatterylI-ION (10,8Vdc and 7800mAH)
It allows to make more than 160 operations (heating/splicing)
lI-ION (10,8Vdc and 7800mAH) It allows to make between 150 and 300 operations
(heating/splicing)
Operating range
Temperature °C - 10º ~ + 50 °C
Storage °C - 40º ~ + 60 °C
Relative humidity % < 95% RH
Work height m Up to 4000 m Up to 5000 m
Physical characteristics
Dimensions (An x Al x Pr)Splicer
mm165 x 180 x 180 133 x 117 x 110
Case 485 x 290 x 260 280 x 220 x 230
Weight kg 3,5 kg (with battery) 1,45 kg (with battery)
televescorporationteleves.com [email protected]
Technical features
3-AXIS ALIGNMENTARC FUSION SPLICERS
Reference 232101 232110
General
Average loss per splice 0,02dB (SM) / 0,01dB (MM) / 0,04dB (DS/NZDS)
Average time per splice 9 seconds (SM standard)
Average time for the heat-shrink sleeve heating 30 seconds (adjustable)
Splice 13 Pre-configurable programmes and 27 user-adjustable
lighting point lED for the splicing (for using in low light areas)
Embedded oven to apply heat-shrink sleeves 9 Pre-configurable programmes and 15 user-adjustable
Fusion modes Auto, Calibrate, Standard, Special
Fibre alignment 3-axis via Core, Clad, Meticulous and Manual (PAS incorporated)
Usable fibres
SM g.652 / g.657 (Single mode)
MM g.651 (Multi mode)
DS g.653
NZDS g.655
Screen 5,7” colour lCD 3,5” colour lCD
DisplayHorizontal 300 zoom magnification for X,Y and X/Y 200 zoom magnification for X,Y and X/Y
Vertical 150 zoom magnification for X/Y 50 magnification zoom for X/Y
Parameter settings
Duration of the heating period P PCutting angle limit P Ploss limit P PCleaning arc P PManual reinforcement P PTensile strength test P PFibre type P PSplice mode Manual/Automatic
languages English, French, german, Italian, Portuguese, Russian, Spanish, Chinese, Corean and Vietnamese
Monitor position O PPower saver mode O PTime/Date settings P PSensors value (real time) O PMenu locking P PContador de arcos P PReplace electrodes function O PStabilize electrodes function P PReset splice counter P PAutomatic detection of dust over the lenses O PDatalog
Splice records Up to 4000 records
Powering
Mains 100 - 240Vac/ 50 – 60Hz
BatterylI-ION (10,8Vdc and 7800mAH)
It allows to make more than 160 operations (heating/splicing)
lI-ION (10,8Vdc and 7800mAH) It allows to make between 150 and 300 operations
(heating/splicing)
Operating range
Temperature °C - 10º ~ + 50 °C
Storage °C - 40º ~ + 60 °C
Relative humidity % < 95% RH
Work height m Up to 4000 m Up to 5000 m
Physical characteristics
Dimensions (An x Al x Pr)Splicer
mm165 x 180 x 180 133 x 117 x 110
Case 485 x 290 x 260 280 x 220 x 230
Weight kg 3,5 kg (with battery) 1,45 kg (with battery)
televescorporationteleves.com [email protected]
Technical features
3-AXIS ALIGNMENTARC FUSION SPLICERS
Reference 232101 232110
General
Average loss per splice 0,02dB (SM) / 0,01dB (MM) / 0,04dB (DS/NZDS)
Average time per splice 9 seconds (SM standard)
Average time for the heat-shrink sleeve heating 30 seconds (adjustable)
Splice 13 Pre-configurable programmes and 27 user-adjustable
lighting point lED for the splicing (for using in low light areas)
Embedded oven to apply heat-shrink sleeves 9 Pre-configurable programmes and 15 user-adjustable
Fusion modes Auto, Calibrate, Standard, Special
Fibre alignment 3-axis via Core, Clad, Meticulous and Manual (PAS incorporated)
Usable fibres
SM g.652 / g.657 (Single mode)
MM g.651 (Multi mode)
DS g.653
NZDS g.655
Screen 5,7” colour lCD 3,5” colour lCD
DisplayHorizontal 300 zoom magnification for X,Y and X/Y 200 zoom magnification for X,Y and X/Y
Vertical 150 zoom magnification for X/Y 50 magnification zoom for X/Y
Parameter settings
Duration of the heating period P PCutting angle limit P Ploss limit P PCleaning arc P PManual reinforcement P PTensile strength test P PFibre type P PSplice mode Manual/Automatic
languages English, French, german, Italian, Portuguese, Russian, Spanish, Chinese, Corean and Vietnamese
Monitor position O PPower saver mode O PTime/Date settings P PSensors value (real time) O PMenu locking P PContador de arcos P PReplace electrodes function O PStabilize electrodes function P PReset splice counter P PAutomatic detection of dust over the lenses O PDatalog
Splice records Up to 4000 records
Powering
Mains 100 - 240Vac/ 50 – 60Hz
BatterylI-ION (10,8Vdc and 7800mAH)
It allows to make more than 160 operations (heating/splicing)
lI-ION (10,8Vdc and 7800mAH) It allows to make between 150 and 300 operations
(heating/splicing)
Operating range
Temperature °C - 10º ~ + 50 °C
Storage °C - 40º ~ + 60 °C
Relative humidity % < 95% RH
Work height m Up to 4000 m Up to 5000 m
Physical characteristics
Dimensions (An x Al x Pr)Splicer
mm165 x 180 x 180 133 x 117 x 110
Case 485 x 290 x 260 280 x 220 x 230
Weight kg 3,5 kg (with battery) 1,45 kg (with battery)
televescorporationteleves.com [email protected]
Technical features
3-AXIS ALIGNMENTARC FUSION SPLICERS
Reference 232101 232110
General
Average loss per splice 0,02dB (SM) / 0,01dB (MM) / 0,04dB (DS/NZDS)
Average time per splice 9 seconds (SM standard)
Average time for the heat-shrink sleeve heating 30 seconds (adjustable)
Splice 13 Pre-configurable programmes and 27 user-adjustable
lighting point lED for the splicing (for using in low light areas)
Embedded oven to apply heat-shrink sleeves 9 Pre-configurable programmes and 15 user-adjustable
Fusion modes Auto, Calibrate, Standard, Special
Fibre alignment 3-axis via Core, Clad, Meticulous and Manual (PAS incorporated)
Usable fibres
SM g.652 / g.657 (Single mode)
MM g.651 (Multi mode)
DS g.653
NZDS g.655
Screen 5,7” colour lCD 3,5” colour lCD
DisplayHorizontal 300 zoom magnification for X,Y and X/Y 200 zoom magnification for X,Y and X/Y
Vertical 150 zoom magnification for X/Y 50 magnification zoom for X/Y
Parameter settings
Duration of the heating period P PCutting angle limit P Ploss limit P PCleaning arc P PManual reinforcement P PTensile strength test P PFibre type P PSplice mode Manual/Automatic
languages English, French, german, Italian, Portuguese, Russian, Spanish, Chinese, Corean and Vietnamese
Monitor position O PPower saver mode O PTime/Date settings P PSensors value (real time) O PMenu locking P PContador de arcos P PReplace electrodes function O PStabilize electrodes function P PReset splice counter P PAutomatic detection of dust over the lenses O PDatalog
Splice records Up to 4000 records
Powering
Mains 100 - 240Vac/ 50 – 60Hz
BatterylI-ION (10,8Vdc and 7800mAH)
It allows to make more than 160 operations (heating/splicing)
lI-ION (10,8Vdc and 7800mAH) It allows to make between 150 and 300 operations
(heating/splicing)
Operating range
Temperature °C - 10º ~ + 50 °C
Storage °C - 40º ~ + 60 °C
Relative humidity % < 95% RH
Work height m Up to 4000 m Up to 5000 m
Physical characteristics
Dimensions (An x Al x Pr)Splicer
mm165 x 180 x 180 133 x 117 x 110
Case 485 x 290 x 260 280 x 220 x 230
Weight kg 3,5 kg (with battery) 1,45 kg (with battery)
televescorporationteleves.com [email protected]
Technical features
3-AXIS ALIGNMENTARC FUSION SPLICERS
Reference 232101 232110
General
Average loss per splice 0,02dB (SM) / 0,01dB (MM) / 0,04dB (DS/NZDS)
Average time per splice 9 seconds (SM standard)
Average time for the heat-shrink sleeve heating 30 seconds (adjustable)
Splice 13 Pre-configurable programmes and 27 user-adjustable
lighting point lED for the splicing (for using in low light areas)
Embedded oven to apply heat-shrink sleeves 9 Pre-configurable programmes and 15 user-adjustable
Fusion modes Auto, Calibrate, Standard, Special
Fibre alignment 3-axis via Core, Clad, Meticulous and Manual (PAS incorporated)
Usable fibres
SM g.652 / g.657 (Single mode)
MM g.651 (Multi mode)
DS g.653
NZDS g.655
Screen 5,7” colour lCD 3,5” colour lCD
DisplayHorizontal 300 zoom magnification for X,Y and X/Y 200 zoom magnification for X,Y and X/Y
Vertical 150 zoom magnification for X/Y 50 magnification zoom for X/Y
Parameter settings
Duration of the heating period P PCutting angle limit P Ploss limit P PCleaning arc P PManual reinforcement P PTensile strength test P PFibre type P PSplice mode Manual/Automatic
languages English, French, german, Italian, Portuguese, Russian, Spanish, Chinese, Corean and Vietnamese
Monitor position O PPower saver mode O PTime/Date settings P PSensors value (real time) O PMenu locking P PContador de arcos P PReplace electrodes function O PStabilize electrodes function P PReset splice counter P PAutomatic detection of dust over the lenses O PDatalog
Splice records Up to 4000 records
Powering
Mains 100 - 240Vac/ 50 – 60Hz
BatterylI-ION (10,8Vdc and 7800mAH)
It allows to make more than 160 operations (heating/splicing)
lI-ION (10,8Vdc and 7800mAH) It allows to make between 150 and 300 operations
(heating/splicing)
Operating range
Temperature °C - 10º ~ + 50 °C
Storage °C - 40º ~ + 60 °C
Relative humidity % < 95% RH
Work height m Up to 4000 m Up to 5000 m
Physical characteristics
Dimensions (An x Al x Pr)Splicer
mm165 x 180 x 180 133 x 117 x 110
Case 485 x 290 x 260 280 x 220 x 230
Weight kg 3,5 kg (with battery) 1,45 kg (with battery)
Mayrwiesstr. 255300 Hallwang
Tel.: +43 (0)662 - 66 15 56 Fax: +43 (0)662 - 66 09 63
FUSION-SPLICE
Pre
ise
sind
Hän
dler
-Net
topr
eise
in E
uro
exkl
. Mw
St.
A
lle A
ngab
en o
hne
Gew
ähr.
Dru
ck- u
nd S
atzf
ehle
r vor
beha
lten.
#1000-0072
televescorporationteleves.com [email protected]
Details (Ref.232101 and 232110)
3-AXIS ALIGNMENTARC FUSION SPLICERS
Interchangeable oven bolster Graphical representation of an inadequate cut Automatic fibre cleaning
Ref.232101 Interchangeable bolster (connector) Fusion point
Ref.232110 Interchangeable bolster (connector) Fusion point
Valid for both references
Splicing process
Inadequate fibre cut
u: Ignore and Skip
Cleaning
u: Help
Fibre display
Ready
u: Help
Fibre cleaning
Cleaning
u: Help
Fibre alignment
Align
u: Help
1 2 3
Fibre splicing
Splicing
u: Help
4
Estimated losses
u: Ayuda
Estimated losses
u: Help
Quality control (Ref.232110)
Quality control (Ref.232101)
televescorporationteleves.com [email protected]
Details (Ref.232101 and 232110)
3-AXIS ALIGNMENTARC FUSION SPLICERS
Interchangeable oven bolster Graphical representation of an inadequate cut Automatic fibre cleaning
Ref.232101 Interchangeable bolster (connector) Fusion point
Ref.232110 Interchangeable bolster (connector) Fusion point
Valid for both references
Splicing process
Inadequate fibre cut
u: Ignore and Skip
Cleaning
u: Help
Fibre display
Ready
u: Help
Fibre cleaning
Cleaning
u: Help
Fibre alignment
Align
u: Help
1 2 3
Fibre splicing
Splicing
u: Help
4
Estimated losses
u: Ayuda
Estimated losses
u: Help
Quality control (Ref.232110)
Quality control (Ref.232101)
televescorporationteleves.com [email protected]
Details (Ref.232101 and 232110)
3-AXIS ALIGNMENTARC FUSION SPLICERS
Interchangeable oven bolster Graphical representation of an inadequate cut Automatic fibre cleaning
Ref.232101 Interchangeable bolster (connector) Fusion point
Ref.232110 Interchangeable bolster (connector) Fusion point
Valid for both references
Splicing process
Inadequate fibre cut
u: Ignore and Skip
Cleaning
u: Help
Fibre display
Ready
u: Help
Fibre cleaning
Cleaning
u: Help
Fibre alignment
Align
u: Help
1 2 3
Fibre splicing
Splicing
u: Help
4
Estimated losses
u: Ayuda
Estimated losses
u: Help
Quality control (Ref.232110)
Quality control (Ref.232101)
ARC FUSION SPLICER3 ACHSEN