3-axis alignment - satec · 3-axis alignment (x,y,z). embedded pas ... contador de arcos p p ......

Mayrwiesstr. 255300 Hallwang

Tel.: +43 (0)662 - 66 15 56 Fax: +43 (0)662 - 66 09 63

[email protected]

FUSION-SPLICE

Pre

ise

sind

Hän

dler

-Net

topr

eise

in E

uro

exkl

. Mw

St.

A

lle A

ngab

en o

hne

Gew

ähr.

Dru

ck- u

nd S

atzf

ehle

r vor

beha

lten.

#1000-0072

ARC FUSION SPLICER3 ACHSEN

NEW PRODUCT DECEMBER 2014

3-axis alignment (X,Y,Z).

Embedded PAS (Profile Alignment System).

Specific bolsters to use with fusion-spliced connectors.

Fully automated operation.

User-friendly menus.

Highlights Product Range

REF. DESCRIPTION EAN 13

232101 F.O. KIT FUSION SPLICER 8424450169124

232110 F.O. KIT FUSION MINI-SPLICER 8424450175644

Make a perfect splice within 9 seconds, thanks to their High-Speed Digital Image Processing and its High Precision 3-axis alignment.

To speed up the splicing, it features an Automatic Splice function so the process will begin as soon as the lid is closed.

FIBRE OPTICS EqUIPMENT DESIgNED FOR PROFESSIONAlS

ARC FUSION SPLICERS3-AXIS ALIGNMENT

Ref. 232101 & 232110

NEW PRODUCT DECEMBER 2014

3-axis alignment (X,Y,Z).

Embedded PAS (Profile Alignment System).

Specific bolsters to use with fusion-spliced connectors.

Fully automated operation.

User-friendly menus.

Highlights Product Range

REF. DESCRIPTION EAN 13

232101 F.O. KIT FUSION SPLICER 8424450169124

232110 F.O. KIT FUSION MINI-SPLICER 8424450175644

Make a perfect splice within 9 seconds, thanks to their High-Speed Digital Image Processing and its High Precision 3-axis alignment.

To speed up the splicing, it features an Automatic Splice function so the process will begin as soon as the lid is closed.

FIBRE OPTICS EqUIPMENT DESIgNED FOR PROFESSIONAlS

ARC FUSION SPLICERS3-AXIS ALIGNMENT

Ref. 232101 & 232110

Fibre Optics equipment designed for professionals


Tel.: +43 (0)662 - 66 15 56 Fax: +43 (0)662 - 66 09 63

[email protected]

FUSION-SPLICE

Pre

ise

sind

Hän

dler

-Net

topr

eise

in E

uro

exkl

. Mw

St.

A

lle A

ngab

en o

hne

Gew

ähr.

Dru

ck- u

nd S

atzf

ehle

r vor

beha

lten.

#1000-0072

televescorporationteleves.com [email protected]

Common features (for Ref. 232101 and 232110)

¬ Eliminate the possibility of failures on the splicing process.

¬ Easy-to-use equipment for those beginning to work with Fibre Optics.

¬ Interchangeable bolsters to use with fibres or fusion-spliced connectors.

¬ LED lighting over the fusion point, for a better positioning of the fibres.

¬ 4 Fusion modes: (Auto, Calibrated, Standard, and Special)

Specific features for Ref. 232101

¬ 5.7" LCD screen to display the resulting fusion in a clearer way.

¬ Robust transport case, with available space to include other tools.


¬ Small size and weight, with all the features of a “regular” fusion splicer.

¬ Specially designed to use it in hard-to-reach areas and works-at-height.

¬ Automatic arc compensation: embedded atmospheric pressure/temperature sensors to adequate the electric arc discharge.

¬ Small-sized case for an easy and practical transport.

¬ Low consumption mode.

¬ Automatic detection of most common faults.

¬ Indication of both Clad/Core deviation and fibre cut angle.

Main features

3-AXIS ALIGNMENTARC FUSION SPLICERS

z 232110

z 232101

Transport case.

Fibre Optic cleaver (Ref. 2323).

High precision stripper (Ref. 2324).

Mains lead and power-line adapter.

Container to hold the rest of chopped fibers or other utensils.

Brush for cleaning lenses and mirrors.

Plastic clamp.

Holder to cool down the fibre protective sleeve once applied.

Set of interchangeable bolsters.

Spare set of electrodes.

Protective cover for the LCD screen (only Ref. 232101)

Battery.

Included accessories

pAdditional bolster

q Additional bolster

pInstalled bolster

zInstalled bolster


Common features (for Ref. 232101 and 232110)

¬ Eliminate the possibility of failures on the splicing process.

¬ Easy-to-use equipment for those beginning to work with Fibre Optics.

¬ Interchangeable bolsters to use with fibres or fusion-spliced connectors.

¬ LED lighting over the fusion point, for a better positioning of the fibres.

¬ 4 Fusion modes: (Auto, Calibrated, Standard, and Special)


¬ 5.7" LCD screen to display the resulting fusion in a clearer way.

¬ Robust transport case, with available space to include other tools.


¬ Small size and weight, with all the features of a “regular” fusion splicer.

¬ Specially designed to use it in hard-to-reach areas and works-at-height.

¬ Automatic arc compensation: embedded atmospheric pressure/temperature sensors to adequate the electric arc discharge.

¬ Small-sized case for an easy and practical transport.

¬ Low consumption mode.

¬ Automatic detection of most common faults.

¬ Indication of both Clad/Core deviation and fibre cut angle.

Main features


z 232110

z 232101

Transport case.

Fibre Optic cleaver (Ref. 2323).

High precision stripper (Ref. 2324).

Mains lead and power-line adapter.

Container to hold the rest of chopped fibers or other utensils.

Brush for cleaning lenses and mirrors.

Plastic clamp.

Holder to cool down the fibre protective sleeve once applied.

Set of interchangeable bolsters.

Spare set of electrodes.

Protective cover for the LCD screen (only Ref. 232101)

Battery.

Included accessories

pAdditional bolster

q Additional bolster

pInstalled bolster

zInstalled bolster



Tel.: +43 (0)662 - 66 15 56 Fax: +43 (0)662 - 66 09 63

[email protected]

FUSION-SPLICE

Pre

ise

sind

Hän

dler

-Net

topr

eise

in E

uro

exkl

. Mw

St.

A

lle A

ngab

en o

hne

Gew

ähr.

Dru

ck- u

nd S

atzf

ehle

r vor

beha

lten.

#1000-0072televescorporationteleves.com [email protected]

Technical features


Reference 232101 232110

General

Average loss per splice 0,02dB (SM) / 0,01dB (MM) / 0,04dB (DS/NZDS)

Average time per splice 9 seconds (SM standard)

Average time for the heat-shrink sleeve heating 30 seconds (adjustable)

Splice 13 Pre-configurable programmes and 27 user-adjustable

lighting point lED for the splicing (for using in low light areas)

Embedded oven to apply heat-shrink sleeves 9 Pre-configurable programmes and 15 user-adjustable

Fusion modes Auto, Calibrate, Standard, Special

Fibre alignment 3-axis via Core, Clad, Meticulous and Manual (PAS incorporated)

Usable fibres

SM g.652 / g.657 (Single mode)

MM g.651 (Multi mode)

DS g.653

NZDS g.655

Screen 5,7” colour lCD 3,5” colour lCD

DisplayHorizontal 300 zoom magnification for X,Y and X/Y 200 zoom magnification for X,Y and X/Y

Vertical 150 zoom magnification for X/Y 50 magnification zoom for X/Y

Parameter settings

Duration of the heating period P PCutting angle limit P Ploss limit P PCleaning arc P PManual reinforcement P PTensile strength test P PFibre type P PSplice mode Manual/Automatic

languages English, French, german, Italian, Portuguese, Russian, Spanish, Chinese, Corean and Vietnamese

Monitor position O PPower saver mode O PTime/Date settings P PSensors value (real time) O PMenu locking P PContador de arcos P PReplace electrodes function O PStabilize electrodes function P PReset splice counter P PAutomatic detection of dust over the lenses O PDatalog

Splice records Up to 4000 records

Powering

Mains 100 - 240Vac/ 50 – 60Hz

BatterylI-ION (10,8Vdc and 7800mAH)

It allows to make more than 160 operations (heating/splicing)

lI-ION (10,8Vdc and 7800mAH) It allows to make between 150 and 300 operations

(heating/splicing)

Operating range

Temperature °C - 10º ~ + 50 °C

Storage °C - 40º ~ + 60 °C

Relative humidity % < 95% RH

Work height m Up to 4000 m Up to 5000 m

Physical characteristics

Dimensions (An x Al x Pr)Splicer

mm165 x 180 x 180 133 x 117 x 110

Case 485 x 290 x 260 280 x 220 x 230

Weight kg 3,5 kg (with battery) 1,45 kg (with battery)


Technical features


Reference 232101 232110

General









Usable fibres



DS g.653

NZDS g.655




Parameter settings





Powering

Mains 100 - 240Vac/ 50 – 60Hz




(heating/splicing)

Operating range


Storage °C - 40º ~ + 60 °C





mm165 x 180 x 180 133 x 117 x 110

Case 485 x 290 x 260 280 x 220 x 230



Technical features


Reference 232101 232110

General









Usable fibres



DS g.653

NZDS g.655




Parameter settings





Powering

Mains 100 - 240Vac/ 50 – 60Hz




(heating/splicing)

Operating range


Storage °C - 40º ~ + 60 °C





mm165 x 180 x 180 133 x 117 x 110

Case 485 x 290 x 260 280 x 220 x 230



Technical features


Reference 232101 232110

General









Usable fibres



DS g.653

NZDS g.655




Parameter settings





Powering

Mains 100 - 240Vac/ 50 – 60Hz




(heating/splicing)

Operating range


Storage °C - 40º ~ + 60 °C





mm165 x 180 x 180 133 x 117 x 110

Case 485 x 290 x 260 280 x 220 x 230



Technical features


Reference 232101 232110

General









Usable fibres



DS g.653

NZDS g.655




Parameter settings





Powering

Mains 100 - 240Vac/ 50 – 60Hz




(heating/splicing)

Operating range


Storage °C - 40º ~ + 60 °C





mm165 x 180 x 180 133 x 117 x 110

Case 485 x 290 x 260 280 x 220 x 230



Tel.: +43 (0)662 - 66 15 56 Fax: +43 (0)662 - 66 09 63

[email protected]

FUSION-SPLICE

Pre

ise

sind

Hän

dler

-Net

topr

eise

in E

uro

exkl

. Mw

St.

A

lle A

ngab

en o

hne

Gew

ähr.

Dru

ck- u

nd S

atzf

ehle

r vor

beha

lten.

#1000-0072


Details (Ref.232101 and 232110)


Interchangeable oven bolster Graphical representation of an inadequate cut Automatic fibre cleaning

Ref.232101 Interchangeable bolster (connector) Fusion point


Valid for both references

Splicing process

Inadequate fibre cut

u: Ignore and Skip

Cleaning

u: Help

Fibre display

Ready

u: Help

Fibre cleaning

Cleaning

u: Help

Fibre alignment

Align

u: Help

1 2 3

Fibre splicing

Splicing

u: Help

4

Estimated losses

u: Ayuda

Estimated losses

u: Help

Quality control (Ref.232110)









Splicing process


u: Ignore and Skip

Cleaning

u: Help

Fibre display

Ready

u: Help

Fibre cleaning

Cleaning

u: Help

Fibre alignment

Align

u: Help

1 2 3

Fibre splicing

Splicing

u: Help

4

Estimated losses

u: Ayuda

Estimated losses

u: Help










Splicing process


u: Ignore and Skip

Cleaning

u: Help

Fibre display

Ready

u: Help

Fibre cleaning

Cleaning

u: Help

Fibre alignment

Align

u: Help

1 2 3

Fibre splicing

Splicing

u: Help

4

Estimated losses

u: Ayuda

Estimated losses

u: Help




3-axis alignment - satec · 3-axis alignment (x,y,z). embedded pas ... contador de arcos p p ......

Documents