Download - 210 mm 刀模線 - Thermaltake
Pacific V-RTX 2080 Plus Funders Edition VGA Water Block
Patented
16.8 Million Color
A x 1 B x 1C x 13 D x 2 E x 7 F x 6 H x 5 I x 2G x 1
3 4
Remove original VGA stock cooler (Remove
the screws circled on the diagram. All heat sink
assembly screws should be removed)
Use GeForce RTX 2080 WINDFORCE OC 8G
as demonstration, other model reference
the installation guide.
When installing the water block, carefully position the water block with the preinstalled standoffs
on the graphics card.
Remove the power connector
(Carefully detach the original stock
cooler)
Parts List
8
Apply thermal compound
Clean the original thermal compound
off the GPU die and remove the screws.
Finish
9
21
6
G
This product is intended for installation only by expert users. Please consult with a qualified technician for installation. Improper installation may result in damage to your equipment.
Before you start using this product please follow these basic guidelines:
1. Please carefully read through the instruction manual before beginning the installation process.
2. Please remove your graphics card from your motherboard to insure the safest process and in order to prevent any possible damages to your CPU and motherboard.
3. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000.
H90 mm
35 mm 40mm
b c
60 mm
a
dd
7mm
7mm
a
bcd d2080
Cut the thermal pads to the dimensions listed and place them on the spots shown on the diagram.
H a
a
abb
c
70 mm
90 mm
bb
60 mm
60 mm
60 mm
a
a
a
7mm
7mm
7mm c
2080Ti
F
C
E
DC
B
I
5
or
Detach the backplate.
7Please confirm your VGA models before following the next step
210 mm
297 mm
刀模線
105G是X X 雙銅單色 無無
其他特殊處理效果表面處理2
厚度(g/m )折數 材質雙面印刷 印刷色彩單面印刷
規格樣式單張 CHECK DESIGN
藍色線條為尺寸標示,請 印刷上去!
Peipei
(18/10/07)
Ronsen
(18/10/07)
產品料號
CL-W240-CU00SW-A Pacific V-RTX 2080 Plus Series Founders Edition 說明書 18/10/3 A
產品名稱 印刷項目 發稿日期 版本
Pacific V-RTX 2080 Plus Funders Edition VGA Water Block
Patented
16.8 Million Color
Parts List
Installation Guide
10
12
13
14 15
11J
N
Connect the Waterblock onto the controller.
JA
N
123
45
Set the DIP switch on the back side of the controller to assign the
number of the controller
J
ON
12
34
NO.1
ON
1 2 3 4
NO.3
ON
1 2 3 4
NO.2
ON
1 2 3 4
NO.4
ON
1 2 3 4
NO.9
ON
1 2 3 4
NO.11
ON
1 2 3 4
NO.10
ON
1 2 3 4
NO.12
ON
1 2 3 4
NO.5
ON
1 2 3 4
NO.7
ON
1 2 3 4
NO.6
ON
1 2 3 4
NO.8
ON
1 2 3 4
NO.13
ON
1 2 3 4
NO.15
ON
1 2 3 4
NO.14
ON
1 2 3 4
NO.16
ON
1 2 3 4
K
K
Connect the controller cable onto the mainboard (USB 2.0 9 pin)
and controller.
If you want to connect two or more connectors, you can use the bridge
cable to connect the controllers.
M M
Connect the power cable to the 4pin Molex connecter and controller.
L L
J x 1 K x 1 L x 1 M x 1 P x 1N x 1 O x 1
Controller Power Cable VelcroController Cable Bridge Cable LED Y - Cable MB SYNC Cable
© 2018 Thermaltake Technology Co., Ltd. All Rights Reserved.
www.thermaltake.com
Connect the LED Y-Cable onto the waterblock.
210 mm
297 mm
刀模線
105G是X X 雙銅單色 無無
其他特殊處理效果表面處理2
厚度(g/m )折數 材質雙面印刷 印刷色彩單面印刷
規格樣式單張 CHECK DESIGN
藍色線條為尺寸標示,請 印刷上去!
Peipei
(18/10/07)
Ronsen
(18/10/07)
產品料號
CL-W240-CU00SW-A Pacific V-RTX 2080 Plus Series Founders Edition 說明書 18/10/3 A
產品名稱 印刷項目 發稿日期 版本
Mianboard SYNC installtation Guide
Please power off the PC and check
the Positive and Negative ends on
the connector before connecting
the cable to mainboard. Connecting
the wrong end can damage the LEDs.
CAUTIONCAUTION
Connect the MB STNC Cable to Water block
Aura Addressable Strip Header(s) Addressable RGB LED Header(s) AOURS RGB Fusion with Digital LEDs
ASUS ASROCK GIGABYTE JRGB-strip Header(S)
MSIMSI
+5V D G
JRAINBOW
G
Pacific V-RTX 2080 Plus Funders Edition VGA Water Block
Patented
16.8 Million Color
© 2018 Thermaltake Technology Co., Ltd. All Rights Reserved.
www.thermaltake.com
N x 1
LED Y - Cable
O x 1
MB SYNC Cable
O
O O O O
N
© 2018 Thermaltake Technology Co., Ltd. All Rights Reserved.
www.thermaltake.com
TT RGB Plus Software control interface
Please download software from Thermaltake Official website.www.thermaltake.com/home.aspxand search " TT RGB Plus " on the official website.OS compatibility: Windows 7 / 8 / 8.1 / 10
1. Software User Interface
A. TT RGB Plus software Profile Setting
A-1 Set up a profile: Choose a Profile and set up the LED Lighting Mode,
then click the SAVE icon(A-3) to store your settings to the software.
A-2 Save a profile to controller: Select a profile and a controller,
then click the Save icon to assign the profile to the controller.
B. Follow the Installation Guide step 3, you can set up the number of the controller
C. LED Lighting Mode
C-1 LED Selection: set up the LEDs lighting, color, and speed.
Light Mode: Choose a lighting mode
Color Mode: Choose the LEDs color
Light Speed: Set up the speed of the LEDs light
LED Spot & Color Palette: Choose the color of each of the individual LEDs by clicking the color palette
Done: Save your setting
Default: Reset the LED setting back to the default
Brightness: Drag the mouse to adjust LED light brightness.
LED On/Off: Click the LED Light icon to turn on or off the LED light
RGB Color Code: Enter the Decimal Code of Red, Green, and Blue to set the LEDs color
C-2 LED On/Off: User can switch off the LED control function in the software if the fan is not plug into the controller.
C-3 Drop-down list: click the product name to choice another you want.
D-1 & D-2. Product Selection: click the control panel to rotate it to the front
Full Lighted / Wave / Pulse / Ripple / Blink / Sound Control / RGB Spectrum / Flow / Thermal...
2. Mobile APP Connection Password
To connect the Riing Plus RGB APP, please connect the PC to your
wireless first, and click the Password setting under the software
setting menu, set up your connection password. The TT RGB Plus
APP will ask for your password every time when starting the APP.
For more information please visit www.thermaltake.com
正體中文
EnglishEnglish
正體中文
簡體中文簡體中文
DeutschDeutsch
FrançaisFrançais
日本語日本語
ไทยไทย
Auto Update OnAuto Update On
Password OnPassword On
Password:8888Password:8888
A-1A-1
A-2A-2
A-3A-3
BB
D-1D-1 D-2D-2
C-1C-1
C-2C-2 C-3C-3
When you open the software, choose the “VGA Plus” in the drop-down list(C-3) first.
C-3C-3
VGA Plus