Download - 13A d/p Cell Transmitter · 50 and 210 kPa (200 and 850 inH ... (For use with Fluorolube-filled or unfilled capsules) Table 6. Parts for Figure 4 Item Part No. Qty. Part Name - U0122BA

Parts List

PL 006-175March 2015

13A d/p Cell® TransmitterStyles B, C, D and E

Model CodeDescription ModelTransmitter 316 ss body 13ATransmitter Monel body 13A4Transmitter Nickel Alloy (a) body (supplied without Process Connectors)

a. Equivalent to Hastelloy® C. Hastelloy is a registered trademark of Haynes International, Inc.

13A5

Span Limits5 and 62 kPa (20 and 250 inH2O, 50 and 620 mbar) ΔP -M50 and 210 kPa (200 and 850 inH2O, 0.5 and 2.1 bar) ΔP -HBody Material316 ss (13A only) SMonel (13A4 only) MNickel Alloy (a) (13A5 and Process Connector Code “0” only) C

Process ConnectorsTapped for 1/4 NPT (Not available with 13A5) 1Tapped for 1/2 NPT (Not available with 13A5) 2Tapped for R 1/4 (Not available with 13A5) 3Tapped for R 1/2 (Not available with 13A5) 4Weld neck for 14 x 21 mm tube (1/2 in Schedule 80 pipe) (Not available with 13A5) 6None, Body tapped for 1/4 NPT 0

Optional SelectionsZero Elevation Kit -LZero Suppression Kit -R

Give instrument Model Code when ordering.*Parts preceded by an asterisk are recommended spare parts.

See Recommended Spare Parts Summary section for quantities.

TO ORDER PARTS, CALL 1-866-746-6477.

PL 006-175Page 2 PARTS

Parts

Figure 1. Transmitter Bottomworks

Table 1. Parts for Figure 1

Item Part No. Qty. Part Name

*1 Below 2 Vent ScrewB0138MJ 316 ss

B0138MK Monel (a)

*2 Below 2 Vent PlugD0161QT 316 ss

D0161QU Monel (a)

3 Below 4 Nut, 0.500-20X0104AB Zinc-plated steel (standard) - Yellow Chromate

X0118AP 17-4 PH ss

X0169BH Monel

X0171RC Zinc-plated steel ASTM A-194 Grade 2M - Yellow Chromate

4 Below 1 CoverN0138RC 316 ss (a)

N0138RG Monel (a)

N0138RJ Nickel Alloy (a) (b)

*5 – 2 Gasket (See last page)

*6 – 1 Capsule Assembly (See “Recommended Spare Parts Summary”

7 – 1 Flexure Assembly (Part of Item 6)

8 Below 4 Plug (see Note 3)

8

1 2 3 4 5 8 6 79

10

11

19

12

12

8

18 17 16 15 8 14 13

PARTS

PL 006-175Page 3

D0161LU 316 ss

D0161LV Monel (a)

D0161LV Nickel Alloy (a) (b)

*9 U0102ML 1 Gasket

10 0030597 2 Screw, F.H., 0.190-32 x 0.375

11 D0129JA 1 Plate*12 Below 1 O-ring

U0102MY Silicone (standard)U0102TK Viton A (Monel & Nickel Alloy (b) Cells)

U0102XE ptfe (cleaned for oxygen or chlorine service)

13 Below 4 Screw, Hex H., 0.500-20 x 3.500X0100BM Zinc-plated steel (standard)

X0118AE 17-4 PH stainless steel

X0171RB Zinc-plated steel ASTM A-193 Grade B7M14 Below 1 Body

N0138CD 316 ss (a)

N0138CF Monel (a)N0138CH Nickel Alloy (a) (b)

*15 Below 2 Screen Disc

D0114FL 316 ssD0117ES Monel (a)

*16 Below – Gasket

D0114RB 2 ptfe (standard)D0120AC 2 glass-filled ptfe (to 190°C, 375°F)U0102XC 1 ptfe, pair cleaned for oxygen or chlorine service

17 – 2 Connector (see table below)18 Below 4 Screw, Hex H., 0.437-20 x 1.500

X0100MN Zinc-plated steel (standard)

X0118AX 17-4 PH stainless steelX0171VP Zinc-plated steel ASTM A-193 Grade B7M

18 Below 4 Screw, Hex H., 0.437-20 x 1.000 (for welding neck connectors)

X0100NT Zinc-plated steel (standard)X0118AY 17-4 PH stainless steel

X0171VN Zinc-plated steel ASTM A-193 Grade B7M

19 X0100BX 1 Screw, F.H., 0.138-32 x 0.375– F0101ES 1 Calibrating Screw Assembly

a. Metallic process wetted materials conforming to NACE Standard MR-01-75.b. Equivalent to Hastelloy C.

Table 1. Parts for Figure 1 (Continued)



NOTES1 Standard plated steel screws and nuts and optional 17-4 PH stainless steel screws and nuts are

non-process wetted and are suitable for Class III bolting requirements of NACE Standard MR-01-75.

2 Optional B7M screws and 2M nuts are non-process wetted and are suitable for Class II bolting requirements of NACE Standard MR-01-75.

3 Nickel Alloy(1) Cells have two plugs (Item 8) instead of vent screws and vent plugs.

Table 2. Connectors (Figure 1 and Item 17 above)

ItemNo. Part Name

316Stainless Steel Monel

17 Connectors 1/2 NPT N0141XN (a)

a. Metallic process wetted materials conforming to NACE Standard MR-01-75.

N0141XL (a)

17 Connectors 1/4 NPT N0141XT (a) N0141XK (a)

17 Connectors R 1/2 B0139BG (a) B0139BF (a)

17 Connectors R 1/4 B0139BD (a) B0139BC (a)17 Connectors, Weld 1/2-inch Pipe N0141XR (a) D0143CZ (a)

1. Equivalent to Hastelloy C.

PARTS

PL 006-175Page 5

Figure 2. Transmitter Topworks

Force Balance Unit (Items 1 to 32)

Part N0999SH – with Stainless Steel Force Bar, 20 to 100 kPa, 3 to 15 psi, 0.2 to 1.0 bar or kg/cm2 output

Part N0999SK – with Monel Force Bar, 20 to 100 kPa, 3 to 15 psi, 0.2 to 1.0 bar or kg/cm2 output(1)

Part N0148JH – with Nickel Alloy(2) Force Bar, 20 to 100 kPa, 3 to 15 psi, 0.2 to 1.0 bar or kg/cm2 output

Part M0155AD – with Nickel Alloy(2) Force Bar, 20 to 100 kPa, 3 to 15 psi, 0.2 to 1.0 bar or kg/cm2 output(1)

Part N0999SE – with Stainless Steel Force Bar, 3 to 27 psi output

Part N0999SE – with Stainless Steel Force Bar, 20 to 100 kPa, 3 to 15 psi, 0.2 to 1.0 bar or kg/cm2 output, usedwith cells having low differential measurement spans (10 to 19.9 inH2O or 2.5 to 5 kPa with medium range capsules, and 12.5 to 50 kPa or 50 to 199 inH2O with high range capsule)

1. Metallic process wetted materials conforming to NACE Standard MR-01-75.2. Equivalent to Hastelloy C.

6

1

2

3

4

1 2

10 11 12 13

31 30 29

27 26 25 20 19 46 18 1 45

11

11

17

14

15

16

3

28

50

32

47

35

4 5 6 7 8

9

51

52

936

3738 40 43

39 41 44

42

5453

22

23

24

2149

48




1 U0102LN 4 Screw, Hex H., 0.250-28 x 0.500

2 0048219 2 Lockwasher

3 Below 1 Bracket AssemblyU0119TA Except N0999SE

U0119TF N0999SE

4 U0102FY 1 Screw

5 0017611 1 Nut, 0.190-32

6 U0102FZ 1 Spring

7 U0102NA 1 Pin

8 Below 1 Bellows AssemblyU0119TC Except N0999SE

U0119TG N0999SE

*9 D0123MZ O-ring, 4.5 mm (0.18 in) ID

10 U0102KP 1 Plate

11 X0153ZC 4 Screw, Socket H., 0.138-32 x 0.187

12 U0102KL 2 Flexure

13 U0102LP 1 Plate

14 N0999MH 1 Flapper

15 X0104EB 1 Nut, 0.190-32

16 N0999FM 1 Flexure Assembly

17 X0100ML 2 Screw, Socket H., 0.164-32 x 0.250

18 X0166MX 2 Washer

19 N0999ML 1 Base

*20 N0143XN 1 O-ring, 15.6 mm (0.61 in) ID

21 N0143NL 1 Force Bar Assy, 316 ss, (N0999SH and SE)

22 N0143SA 1 Washer, Monel

23 U0102MX 1 Dished Washer, cobalt alloy

24 U0102LE 1 Nut, 316 stainless steel

21 N0143MM 1 Force Bar Assembly, Monel, (N0999SK) (a)



24 U0102SE 1 Nut, Monel

21 N0148JG 1 Force Bar Assy, Nickel Alloy (b), (N0148JH)

22 N0148HL 1 Washer, Nickel Alloy (b)

24 N0148HM 1 Nut, Nickel Alloy (b)

21 M0155AE 1 Force Bar Assy, Nickel Alloy (b), (M0155AD) (a)

22 N0148HL 1 Washer, Nickel Alloy (b)

24 N0148HM 1 Nut, Nickel Alloy (b)

21 B0123BD 1 Force Bar Assy, 316 ss, w/Tantalum Seal

22 N0143SB 1 Washer, 316 stainless steel


24 U0102LE 1 Nut, 316 stainless steel

21 B0123BB 1 Force Bar Assy, Monel, w/Tantalum Seal


PARTS

PL 006-175Page 7

Other Topworks Parts


24 U0102SE 1 Nut, Monel

25 N0142NY 1 Spacer

26 U0102TE 1 Bracket Assembly

27 0023442 2 Screw, Fil. H., 0.099-48 x 0.187

28 N0999MP 1 Vernier Range Bar Assy (N0999SE)

29 U0102KR 1 Spring Holder

30 N0999MC 1 Spring

31 U0102KC 1 Spring Holder

28 N0999QA 1 Vernier Range Bar Assy (Except N0999SE)

29 U0102KR 1 Spring Holder

30 N0999MG 1 Spring

31 U0102KC 1 Spring Holder

*32 U0119TB 1 Nozzle Assembly

*9 D0123MZ 1 O-ring, 4.5 mm (0.18 in) ID

a. Metallic process wetted materials conforming to NACE Standard MR-01-75.b. Equivalent to Hastelloy C.

Table 4. Parts for Other Topworks


35 D0124QJ 1 Relay Mounting Assembly,1/4 NPT, gray

*36 D0124QP 1 Orifice Screw Assy (Since Sept. 1977)

*37 D0123MZ 1 O-ring, 4.5 mm (0.18 in) ID

*38 A037744 1 O-ring, 2.9 mm (0.11 in) ID

39 U0102MF 1 Clamp

40 X0100AA 1 Screw, Fil. H., 0.138-32 x 0.218

*41 C0136HZ 1 Relay Replacement Kit

*42 C0100EM 1 Gasket

*43 U0103FP 2 Screen

44 X0116CS 2 Screw, Pan H., 0.190-32 x 1.000

45 0006535 2 Screw, Fil. H., 0.190-32 x 0.750

46 X0172NJ 3 Screw, Socket H., 0.250-28 x 0.750

*47 C0130EF 1 Screw Assembly (prior to Jan. 1974)

*48 D0123MZ 1 O-ring, 4.5 mm (0.18 in) ID

*49 A037744 1 O-ring, 2.9 mm (0.11 in) ID

50 B1277PM 1 Cover Assembly, plastic

51 D0129GH 4 Screw (used with plastic cover)

52 B1271CY 1 Gasket

53 A037744 O-ring (Used Jan 1974 to Sept. 1977)

54 D0124JG Restrictor (Used Jan 1974 to Sept. 1977)

– N0138GA – Dashpot Kit (oxygen or chlorine servicewith unfilled or Fluorolube-filled capsules)

Table 3. Parts for Figure 2 (Continued)



Optional Zero Elevation and Suppression Kits (Figures 3 through 6)

Figure 3. Zero Elevation Kit

NOTENote: Also used with 15 to 3 psi (reverse) output.

– Below 1 ScaleN0148RG 20 to 250 inH2O

N0148RH 200 to 850 inH2O

N0148RJ 10 to 125 inH2O

B0123HX 50 to 425 inH2O



– U0122BS – Zero Elevation Kit

1 X0116PB 1 Screw, Socket H., 0.125-40 x 0.1872 N0138GB 1 Bracket

3 U0124EZ 2 Screw, Socket H., 0.138-32 x 0.312

4 X0100ZB 4 Screw, Pan H., 0.125-40 x 0.1565 U0122BB 1 Spring Assembly

6 N0138BS 2 Plate

Table 4. Parts for Other Topworks (Continued)


1 2 3 4 5

6 4

PARTS

PL 006-175Page 9

Figure 4. Zero Suppression Kit

Figure 5. Zero Elevation Kit(For use with Fluorolube-filled or unfilled capsules)



- U0122BA – Zero Suppression Kit1 U0122BB 1 Spring Assembly

2 X0116PB 5 Screw, Socket H., 0.125-40 x 0.187

2 X0133UR 2 Screw, Socket H., 0.138-32 x 0.2504 U0102RW 1 Bracket

5 N0138BS 2 Plate

5

2

4

2321

1 3 4 5

7

1189710


Figure 6. Zero Suppression Kit(For use with Fluorolube-filled or unfilled capsule)



– N0138GG – Zero Elevation Kit

1 U0122BB 1 Spring Assembly3 U0124EZ 2 Screw, Socket H., 0.138-32 x 0.312

4 N0138GB 1 Bracket

5 X0116PB 1 Screw, Socket H., 0.125-40 x 0.2507 X0100ZB 3 Screw, Pan H., 0.125-40 x 0.156

8 U0114BM 1 Bracket

9 U0122BX 1 Stop10 U0122BY 1 Screw, Socket H., 0.125-40 x 0.500

11 N0138BS 2 Plate



– U0122BN – Zero Suppression Kit1 U0122BB 1 Spring Assembly

2 X0116ET 2 Screw, Socket H., 0.125-40 x 0.250

3 X0116PB 1 Screw, Socket H., 0.125-40 x 0.187

1 2 3

PARTS

PL 006-175Page 11

Optional Filter Sets, Pressure Regulators, and Pressure Gauges (see Figures 7 and 8)

Figure 7. Integral Air Filter Set with Fixed Pressure Regulator and Mounting Set



– Below 1 Air Filter Set (items 1-5)B0110FE With copper tube

B0127YV With polyolefin-coated tube

1 0014802 1 Connector

2 X0172BE 1 Elbow

3 Below 1 TubeB0110FF Copper

B0127YM polyolefin-coated

– X0168FF 2 Shrinkable Tube (used at each end of polyolefin-coated tube)

*4 B0123HD 1 Filter Regulator

5 X0100AG 2 Screw, Hex H., 0.250-20 x 0.500

Mounting Set

6 N0141ZT – Mounting Set (items 7-10)

7 0011962 2 Nut, 0.312-18

8 N0141ZW 1 Mounting Bracket

9 Below 4 Screw, Hex H., 0.438-20 x 0.625X0100NW Plated steel (standard)

P0120RN 316 stainless steel

10 D0114SM 1 U-bolt

1

2

3 64 5

7 8 9 10


Figure 8. Integral Air Filter Set with Adjustable Pressure Regulator

Supply Pressure Gauges (Used With Above Filter Sets) (Shown in Figure 8)



– Below 1 Air Filter Set (items 1-11)B0114BF With copper tube

B0127ZF With polyolefin tube

1 X0172BE 1 Elbow

2 0011962 2 Nut, 0.312-18

3 0025962 2 Lockwasher

4 Below 1 TubeB0114ZT Copper

B0127YH Polyolefin-coated

– X0168FF 2 Shrinkable Tube (used at each end of polyolefin-coated tube)

5 B0114BE 1 Bracket

*6 B0123HE 1 Filter Regulator

7 X0100KW 2 Screw, Hex H., 0.312-18 x 3.750

8 B0110TN 1 Tee

9 0014116 1 Elbow

10 0012354 2 Nut, 0.250-20

11 X0100AG 2 Screw, Hex H., 0.250-20 x 0.500

Table 11. Parts for Supply Pressure Gauges


*12 Below 1 Pressure GaugeP0103YM 0 to 30 psi/0 to 2 bar

P0121BL 0 to 200 kPa/0 to 2 kg/cm2

P0122JD 1 Pressure Gauge (green band)

21 3 4 5 6 7

891011 12

PARTS

PL 006-175Page 13

Optional Capsule Assemblies and Gaskets

Table 12. Optional Capsule Assemblies and Gaskets

Range and Material

Capsule Assembly

Item 6 Fig. E821A

Flexure Assembly

Item 7 Fig. E821A

Gaskets, Item 5

Metal 150°C (375°F)

ptfe 121°C (250°F)

glass-filled ptfe 190°C

(375°F)

pair of ptfe cleaned for oxygen or chlorine service

Ranges 0-5 to 0-62 kPa or 0-20 to 0-250 inH2O

316 Stainless Steel N0142NU D0114XZ N0143ZT D0114TP – –

316 ss Fluorolube-filled (oxygen service)

N0148UB D0114XZ N0143ZT – – U0102XB

Tantalum and Nickel Alloy (a)

a. Equivalent to Hastelloy C.

N0151MY D0120KK – D0114TP D0120AB –

Monel N0151PR (b)

b. Metallic process wetted materials conforming to NACE Standard MR-01-75.

D0117NN N0148AW (b) D0114TP – –Monel, Fluorolube-filled (oxygen service)

N0151WD D0117NN N0148AW (b) – – U0102XB

Duranickel and Monel N0151QC D0117NN N0148AW (b) D0114TP – –Nickel Alloy (a) N0150ZP (b) D0120KK – D0114TP D0120AB

316 ss, high viscosity fill N0148UA D0117XZ N0143ZT D0114TP – –

316 ss, gold plated N0148RM – N0143ZT – – –316 ss, Dow 710 filled N0150ZA D0117XZ N0143ZT D0114TP – –

Nickel Alloy (a), Fluorolube-filled (chlorine service)

N0151PA D0120KK – – – U0102XB

Ranges 0-50 to 0-210 kPa or 0-200 to 0-850 inH2O

316 Stainless Steel N0999KP NotRemovable

N0143ZT D0114TP – –

316 ss Fluorolube-filled (oxygen service)

A0129CA N0143ZT – – U0102XB

316 ss, gold plated N0148RN N0143ZT D0114TP – –

Duranickel and Monel D0117NZ N0148AW (b) D0114TP – –Duranickel and Monel, Fluorolube-filled (oxygen service)

A073110 N0148AW (b) – – U0102XB

Nickel Alloy (a) A093756 (b) – D0114TP D0120AB –

316 ss, Dow 710 filled N0150ZB N0143ZT D0114TP – –

Nickel Alloy (a), Fluorolube-filled (chlorine service)

N0150YA – – – U0102XB

Range 0-50 to 0-100 kPa or 0-200 to 0-400 inH2O

Monel A090927 (b) NotRemovable

N0148AW (b) – – –

Table 13. Optional Ermeto Connector

Size 316 Carbon Steel Brass

1/4 NPT x 6 mm U7002AS U7002AT U7002AU

1/2 NPT x 12 mm U7002AP U7002AR U7002AU

PL 006-175Page 14 RECOMMENDED SPARE PARTS SUMMARY

Table 14. Optional Output Signal Test Tee

Part No. Qty. Name

D6002BK 2 Nipple

D6002BL 1 Valve

Q0101NE 1 Plug

0040508 1 Tee96000BL 1 Assy Drawing

Recommended Spare Parts Summary

FigureNumber

ItemNumber

PartNumber Part Name

Number of Parts Recommended for

1 Inst. 5 Inst.20

Inst.

The following parts are used in the Instrument Measuring Section:Figure 1 1 Below Vent Screw 0 1 2

B0138MJ 316 ss

B0138MK Monel2 Below Vent Plug 0 1 2

D0161QT 316 ss

D0161QU Monel5 Below Metal Gasket (for 316 ss or Monel Capsules) 2 4 6

N0143ZT 316 ss

N0148AW MonelBelow Plastic Gasket

D0114TP ptfe

U0102XB Pair ptfe (cleaned for oxygen or chlorine service)6 Below Capsule Assembly, 0-20 to 0-250 inH2O, 0-5 to 0-62 kPa 0 0 1

N0142NU 316 ss

N0148UB 316 ss (Fluorolube-filled for oxygen service)N0151MY Tantalum and Nickel Alloy (a)

N0151PR Monel

N0151WD Monel (Fluorolube-filled)N0151QC Duranickel and Monel

N0150ZP Nickel Alloy (a)

N0148UA 316 ss, high viscosity fillN0148RM 316 ss, gold plated

N0150ZA 316 ss, low viscosity fill

N0151PA Nickel Alloy (a), Fluorolube-filled (chlorine service)Below Capsule Assembly, 0-200 to 0-850 inH2O, 0-5 to 0-210

kPa

N0999KP 316 ss

A0129CA 316 ss Fluorolube-filled (oxygen service)D0117NZ Duranickel and Monel

A093756 Nickel Alloy (a)

A073110 Duranickel and Monel (Fluorolube-filled)N0148RN 316 ss, gold-plated

N0150ZB 316 ss, low viscosity filled

N0150YA Nickel Alloy (a) (Fluorolube-filled)

RECOMMENDED SPARE PARTS SUMMARY

PL 006-175Page 15

(a)

Figure 1(Cont.)

6(Cont.)

A090927 Capsule Assembly, Monel, 0-200 to 0-400 inH2O, 0-50 to 0-100 kPa

0 0 1

9 U0102ML Gasket 0 1 2

The following gasket is used between the Measuring and Transmission Sections:

Figure 1 12 Below O-ring (gasket) 0 1 2U0102MY Silicone Elastomer (standard)

U0102TK Viton A

U0102XE ptfe (clean for oxygen or chlorine service)15 Below Screen Disc 2 4 12

D0114FL 316 ss

D0117ES Monel16 Below Gasket 2 4 12

D0114RB ptfe (standard)

D0120AC Glass-filled ptfe (to 109°C, 357°F)U0102XC Pair ptfe (cleaned for oxygen or chlorine service)

Figure 2 9 D0123MZ O-ring, 4.5 mm (0.18 in) ID 3 6 9

20 N0143XN O-ring, 15.6 mm (0.61 in) ID 0 0 232 U0119TB Nozzle Assembly 1 1 2

36 D0124QP Orifice Screw Assy (Style E instrument) 1 1 2

37 D0123MZ O-ring, 4.5 mm (0.18 in) ID 1 2 338 A037744 O-ring, 2.9 mm (0.11 in) ID 1 2 3

41 C0136HZ Relay Replacement Kit 1 1 2

42 C0100EM Gasket 1 2 443 U0103FP Screen 2 4 8

47 C0130EF Screw Assembly (prior to Jan. 1974) 1 1 2

48 D0123MZ O-Ring, 4.5 mm (0.18 in) ID 1 2 349 A037744 O-Ring, 2.9 mm (0.11 in) ID 1 2 3

The following regulators are used in the Air Filter Sets:

Figure 7 4 B0123HD Regulator, Fixed Pressure 0 0 1Figure 8 6 B0123HE Regulator, Adjustable Pressure 0 0 1

12 Below Pressure Gauge 0 1 3

P0103YM 0 to 30 psi/0 to 2 barP0121BL 0 to 200 kPa/0 to 2 kg/cm2

P0122JD Green Band

a. Equivalent to Hastelloy C.

Recommended Spare Parts Summary (Continued)

FigureNumber

ItemNumber

PartNumber Part Name

Number of Parts Recommended for

1 Inst. 5 Inst.20

Inst.

PL 006-175Page 16

Invensys Systems, Inc. 10900 Equity DriveHouston, TX 77041United States of Americahttp://www.invensys.com

Global Customer SupportInside U.S.: 1-866-746-6477Outside U.S.: 1-508-549-2424Website: http://support.ips.invensys.com

Copyright 1971-2015 Invensys Systems, Inc.All rights reserved.

Invensys, Foxboro, and d/p Cell are trademarks of Invensys Limited, its subsidiaries, and affiliates. All other trademarks are the property of their respective owners.

Invensys is now part of Schneider Electric.

0315

Go Back13A d/p Cell® TransmitterStyles B, C, D and EModel CodePartsFigure 1. Transmitter BottomworksFigure 2. Transmitter TopworksFigure 3. Zero Elevation KitFigure 4. Zero Suppression KitFigure 5. Zero Elevation Kit (For use with Fluorolube-filled or unfilled capsules)Figure 6. Zero Suppression Kit (For use with Fluorolube-filled or unfilled capsule)Figure 7. Integral Air Filter Set with Fixed Pressure Regulator and Mounting SetFigure 8. Integral Air Filter Set with Adjustable Pressure Regulator

Recommended Spare Parts Summary

Download - 13A d/p Cell Transmitter · 50 and 210 kPa (200 and 850 inH ... (For use with Fluorolube-filled or unfilled capsules) Table 6. Parts for Figure 4 Item Part No. Qty. Part Name - U0122BA

Top Related