13a d/p cell transmitter · 50 and 210 kpa (200 and 850 inh ... (for use with fluorolube-filled or...
TRANSCRIPT
-
Parts List
PL 006-175March 2015
13A d/p Cell® TransmitterStyles B, C, D and E
Model CodeDescription ModelTransmitter 316 ss body 13ATransmitter Monel body 13A4Transmitter Nickel Alloy (a) body (supplied without Process Connectors)
a. Equivalent to Hastelloy® C. Hastelloy is a registered trademark of Haynes International, Inc.
13A5
Span Limits5 and 62 kPa (20 and 250 inH2O, 50 and 620 mbar) ΔP -M50 and 210 kPa (200 and 850 inH2O, 0.5 and 2.1 bar) ΔP -HBody Material316 ss (13A only) SMonel (13A4 only) MNickel Alloy (a) (13A5 and Process Connector Code “0” only) C
Process ConnectorsTapped for 1/4 NPT (Not available with 13A5) 1Tapped for 1/2 NPT (Not available with 13A5) 2Tapped for R 1/4 (Not available with 13A5) 3Tapped for R 1/2 (Not available with 13A5) 4Weld neck for 14 x 21 mm tube (1/2 in Schedule 80 pipe) (Not available with 13A5) 6None, Body tapped for 1/4 NPT 0
Optional SelectionsZero Elevation Kit -LZero Suppression Kit -R
Give instrument Model Code when ordering.*Parts preceded by an asterisk are recommended spare parts.
See Recommended Spare Parts Summary section for quantities.
TO ORDER PARTS, CALL 1-866-746-6477.
-
PL 006-175Page 2 PARTS
Parts
Figure 1. Transmitter Bottomworks
Table 1. Parts for Figure 1
Item Part No. Qty. Part Name
*1 Below 2 Vent ScrewB0138MJ 316 ss
B0138MK Monel (a)
*2 Below 2 Vent PlugD0161QT 316 ss
D0161QU Monel (a)
3 Below 4 Nut, 0.500-20X0104AB Zinc-plated steel (standard) - Yellow Chromate
X0118AP 17-4 PH ss
X0169BH Monel
X0171RC Zinc-plated steel ASTM A-194 Grade 2M - Yellow Chromate
4 Below 1 CoverN0138RC 316 ss (a)
N0138RG Monel (a)
N0138RJ Nickel Alloy (a) (b)
*5 – 2 Gasket (See last page)
*6 – 1 Capsule Assembly (See “Recommended Spare Parts Summary”
7 – 1 Flexure Assembly (Part of Item 6)
8 Below 4 Plug (see Note 3)
8
1 2 3 4 5 8 6 79
10
11
19
12
12
8
18 17 16 15 8 14 13
-
PARTS
PL 006-175Page 3
D0161LU 316 ss
D0161LV Monel (a)
D0161LV Nickel Alloy (a) (b)
*9 U0102ML 1 Gasket
10 0030597 2 Screw, F.H., 0.190-32 x 0.375
11 D0129JA 1 Plate*12 Below 1 O-ring
U0102MY Silicone (standard)U0102TK Viton A (Monel & Nickel Alloy (b) Cells)
U0102XE ptfe (cleaned for oxygen or chlorine service)
13 Below 4 Screw, Hex H., 0.500-20 x 3.500X0100BM Zinc-plated steel (standard)
X0118AE 17-4 PH stainless steel
X0171RB Zinc-plated steel ASTM A-193 Grade B7M14 Below 1 Body
N0138CD 316 ss (a)
N0138CF Monel (a)N0138CH Nickel Alloy (a) (b)
*15 Below 2 Screen Disc
D0114FL 316 ssD0117ES Monel (a)
*16 Below – Gasket
D0114RB 2 ptfe (standard)D0120AC 2 glass-filled ptfe (to 190°C, 375°F)U0102XC 1 ptfe, pair cleaned for oxygen or chlorine service
17 – 2 Connector (see table below)18 Below 4 Screw, Hex H., 0.437-20 x 1.500
X0100MN Zinc-plated steel (standard)
X0118AX 17-4 PH stainless steelX0171VP Zinc-plated steel ASTM A-193 Grade B7M
18 Below 4 Screw, Hex H., 0.437-20 x 1.000 (for welding neck connectors)
X0100NT Zinc-plated steel (standard)X0118AY 17-4 PH stainless steel
X0171VN Zinc-plated steel ASTM A-193 Grade B7M
19 X0100BX 1 Screw, F.H., 0.138-32 x 0.375– F0101ES 1 Calibrating Screw Assembly
a. Metallic process wetted materials conforming to NACE Standard MR-01-75.b. Equivalent to Hastelloy C.
Table 1. Parts for Figure 1 (Continued)
Item Part No. Qty. Part Name
-
PL 006-175Page 4 PARTS
NOTES1 Standard plated steel screws and nuts and optional 17-4 PH stainless steel screws and nuts are
non-process wetted and are suitable for Class III bolting requirements of NACE Standard MR-01-75.
2 Optional B7M screws and 2M nuts are non-process wetted and are suitable for Class II bolting requirements of NACE Standard MR-01-75.
3 Nickel Alloy(1) Cells have two plugs (Item 8) instead of vent screws and vent plugs.
Table 2. Connectors (Figure 1 and Item 17 above)
ItemNo. Part Name
316Stainless Steel Monel
17 Connectors 1/2 NPT N0141XN (a)
a. Metallic process wetted materials conforming to NACE Standard MR-01-75.
N0141XL (a)
17 Connectors 1/4 NPT N0141XT (a) N0141XK (a)
17 Connectors R 1/2 B0139BG (a) B0139BF (a)
17 Connectors R 1/4 B0139BD (a) B0139BC (a)17 Connectors, Weld 1/2-inch Pipe N0141XR (a) D0143CZ (a)
1. Equivalent to Hastelloy C.
-
PARTS
PL 006-175Page 5
Figure 2. Transmitter Topworks
Force Balance Unit (Items 1 to 32)
Part N0999SH – with Stainless Steel Force Bar, 20 to 100 kPa, 3 to 15 psi, 0.2 to 1.0 bar or kg/cm2 output
Part N0999SK – with Monel Force Bar, 20 to 100 kPa, 3 to 15 psi, 0.2 to 1.0 bar or kg/cm2 output(1)
Part N0148JH – with Nickel Alloy(2) Force Bar, 20 to 100 kPa, 3 to 15 psi, 0.2 to 1.0 bar or kg/cm2 output
Part M0155AD – with Nickel Alloy(2) Force Bar, 20 to 100 kPa, 3 to 15 psi, 0.2 to 1.0 bar or kg/cm2 output(1)
Part N0999SE – with Stainless Steel Force Bar, 3 to 27 psi output
Part N0999SE – with Stainless Steel Force Bar, 20 to 100 kPa, 3 to 15 psi, 0.2 to 1.0 bar or kg/cm2 output, usedwith cells having low differential measurement spans (10 to 19.9 inH2O or 2.5 to 5 kPa with medium range capsules, and 12.5 to 50 kPa or 50 to 199 inH2O with high range capsule)
1. Metallic process wetted materials conforming to NACE Standard MR-01-75.2. Equivalent to Hastelloy C.
6
1
2
3
4
1 2
10 11 12 13
31 30 29
27 26 25 20 19 46 18 1 45
11
11
17
14
15
16
3
28
50
32
47
35
4 5 6 7 8
9
51
52
936
3738 40 43
39 41 44
42
5453
22
23
24
2149
48
-
PL 006-175Page 6 PARTS
Table 3. Parts for Figure 2
Item Part No. Qty. Part Name
1 U0102LN 4 Screw, Hex H., 0.250-28 x 0.500
2 0048219 2 Lockwasher
3 Below 1 Bracket AssemblyU0119TA Except N0999SE
U0119TF N0999SE
4 U0102FY 1 Screw
5 0017611 1 Nut, 0.190-32
6 U0102FZ 1 Spring
7 U0102NA 1 Pin
8 Below 1 Bellows AssemblyU0119TC Except N0999SE
U0119TG N0999SE
*9 D0123MZ O-ring, 4.5 mm (0.18 in) ID
10 U0102KP 1 Plate
11 X0153ZC 4 Screw, Socket H., 0.138-32 x 0.187
12 U0102KL 2 Flexure
13 U0102LP 1 Plate
14 N0999MH 1 Flapper
15 X0104EB 1 Nut, 0.190-32
16 N0999FM 1 Flexure Assembly
17 X0100ML 2 Screw, Socket H., 0.164-32 x 0.250
18 X0166MX 2 Washer
19 N0999ML 1 Base
*20 N0143XN 1 O-ring, 15.6 mm (0.61 in) ID
21 N0143NL 1 Force Bar Assy, 316 ss, (N0999SH and SE)
22 N0143SA 1 Washer, Monel
23 U0102MX 1 Dished Washer, cobalt alloy
24 U0102LE 1 Nut, 316 stainless steel
21 N0143MM 1 Force Bar Assembly, Monel, (N0999SK) (a)
22 N0143SA 1 Washer, Monel
23 U0102MX 1 Dished Washer, cobalt alloy
24 U0102SE 1 Nut, Monel
21 N0148JG 1 Force Bar Assy, Nickel Alloy (b), (N0148JH)
22 N0148HL 1 Washer, Nickel Alloy (b)
24 N0148HM 1 Nut, Nickel Alloy (b)
21 M0155AE 1 Force Bar Assy, Nickel Alloy (b), (M0155AD) (a)
22 N0148HL 1 Washer, Nickel Alloy (b)
24 N0148HM 1 Nut, Nickel Alloy (b)
21 B0123BD 1 Force Bar Assy, 316 ss, w/Tantalum Seal
22 N0143SB 1 Washer, 316 stainless steel
23 U0102MX 1 Dished Washer, cobalt alloy
24 U0102LE 1 Nut, 316 stainless steel
21 B0123BB 1 Force Bar Assy, Monel, w/Tantalum Seal
22 N0143SA 1 Washer, Monel
-
PARTS
PL 006-175Page 7
Other Topworks Parts
23 U0102MX 1 Dished Washer, cobalt alloy
24 U0102SE 1 Nut, Monel
25 N0142NY 1 Spacer
26 U0102TE 1 Bracket Assembly
27 0023442 2 Screw, Fil. H., 0.099-48 x 0.187
28 N0999MP 1 Vernier Range Bar Assy (N0999SE)
29 U0102KR 1 Spring Holder
30 N0999MC 1 Spring
31 U0102KC 1 Spring Holder
28 N0999QA 1 Vernier Range Bar Assy (Except N0999SE)
29 U0102KR 1 Spring Holder
30 N0999MG 1 Spring
31 U0102KC 1 Spring Holder
*32 U0119TB 1 Nozzle Assembly
*9 D0123MZ 1 O-ring, 4.5 mm (0.18 in) ID
a. Metallic process wetted materials conforming to NACE Standard MR-01-75.b. Equivalent to Hastelloy C.
Table 4. Parts for Other Topworks
Item Part No. Qty. Part Name
35 D0124QJ 1 Relay Mounting Assembly,1/4 NPT, gray
*36 D0124QP 1 Orifice Screw Assy (Since Sept. 1977)
*37 D0123MZ 1 O-ring, 4.5 mm (0.18 in) ID
*38 A037744 1 O-ring, 2.9 mm (0.11 in) ID
39 U0102MF 1 Clamp
40 X0100AA 1 Screw, Fil. H., 0.138-32 x 0.218
*41 C0136HZ 1 Relay Replacement Kit
*42 C0100EM 1 Gasket
*43 U0103FP 2 Screen
44 X0116CS 2 Screw, Pan H., 0.190-32 x 1.000
45 0006535 2 Screw, Fil. H., 0.190-32 x 0.750
46 X0172NJ 3 Screw, Socket H., 0.250-28 x 0.750
*47 C0130EF 1 Screw Assembly (prior to Jan. 1974)
*48 D0123MZ 1 O-ring, 4.5 mm (0.18 in) ID
*49 A037744 1 O-ring, 2.9 mm (0.11 in) ID
50 B1277PM 1 Cover Assembly, plastic
51 D0129GH 4 Screw (used with plastic cover)
52 B1271CY 1 Gasket
53 A037744 O-ring (Used Jan 1974 to Sept. 1977)
54 D0124JG Restrictor (Used Jan 1974 to Sept. 1977)
– N0138GA – Dashpot Kit (oxygen or chlorine servicewith unfilled or Fluorolube-filled capsules)
Table 3. Parts for Figure 2 (Continued)
Item Part No. Qty. Part Name
-
PL 006-175Page 8 PARTS
Optional Zero Elevation and Suppression Kits (Figures 3 through 6)
Figure 3. Zero Elevation Kit
NOTENote: Also used with 15 to 3 psi (reverse) output.
– Below 1 ScaleN0148RG 20 to 250 inH2O
N0148RH 200 to 850 inH2O
N0148RJ 10 to 125 inH2O
B0123HX 50 to 425 inH2O
Table 5. Parts for Figure 3
Item Part No. Qty. Part Name
– U0122BS – Zero Elevation Kit
1 X0116PB 1 Screw, Socket H., 0.125-40 x 0.1872 N0138GB 1 Bracket
3 U0124EZ 2 Screw, Socket H., 0.138-32 x 0.312
4 X0100ZB 4 Screw, Pan H., 0.125-40 x 0.1565 U0122BB 1 Spring Assembly
6 N0138BS 2 Plate
Table 4. Parts for Other Topworks (Continued)
Item Part No. Qty. Part Name
1 2 3 4 5
6 4
-
PARTS
PL 006-175Page 9
Figure 4. Zero Suppression Kit
Figure 5. Zero Elevation Kit(For use with Fluorolube-filled or unfilled capsules)
Table 6. Parts for Figure 4
Item Part No. Qty. Part Name
- U0122BA – Zero Suppression Kit1 U0122BB 1 Spring Assembly
2 X0116PB 5 Screw, Socket H., 0.125-40 x 0.187
2 X0133UR 2 Screw, Socket H., 0.138-32 x 0.2504 U0102RW 1 Bracket
5 N0138BS 2 Plate
5
2
4
2321
1 3 4 5
7
1189710
-
PL 006-175Page 10 PARTS
Figure 6. Zero Suppression Kit(For use with Fluorolube-filled or unfilled capsule)
Table 7. Parts for Figure 5
Item Part No. Qty. Part Name
– N0138GG – Zero Elevation Kit
1 U0122BB 1 Spring Assembly3 U0124EZ 2 Screw, Socket H., 0.138-32 x 0.312
4 N0138GB 1 Bracket
5 X0116PB 1 Screw, Socket H., 0.125-40 x 0.2507 X0100ZB 3 Screw, Pan H., 0.125-40 x 0.156
8 U0114BM 1 Bracket
9 U0122BX 1 Stop10 U0122BY 1 Screw, Socket H., 0.125-40 x 0.500
11 N0138BS 2 Plate
Table 8. Parts for Figure 6
Item Part No. Qty. Part Name
– U0122BN – Zero Suppression Kit1 U0122BB 1 Spring Assembly
2 X0116ET 2 Screw, Socket H., 0.125-40 x 0.250
3 X0116PB 1 Screw, Socket H., 0.125-40 x 0.187
1 2 3
-
PARTS
PL 006-175Page 11
Optional Filter Sets, Pressure Regulators, and Pressure Gauges (see Figures 7 and 8)
Figure 7. Integral Air Filter Set with Fixed Pressure Regulator and Mounting Set
Table 9. Parts for Figure 7
Item Part No. Qty. Part Name
– Below 1 Air Filter Set (items 1-5)B0110FE With copper tube
B0127YV With polyolefin-coated tube
1 0014802 1 Connector
2 X0172BE 1 Elbow
3 Below 1 TubeB0110FF Copper
B0127YM polyolefin-coated
– X0168FF 2 Shrinkable Tube (used at each end of polyolefin-coated tube)
*4 B0123HD 1 Filter Regulator
5 X0100AG 2 Screw, Hex H., 0.250-20 x 0.500
Mounting Set
6 N0141ZT – Mounting Set (items 7-10)
7 0011962 2 Nut, 0.312-18
8 N0141ZW 1 Mounting Bracket
9 Below 4 Screw, Hex H., 0.438-20 x 0.625X0100NW Plated steel (standard)
P0120RN 316 stainless steel
10 D0114SM 1 U-bolt
1
2
3 64 5
7 8 9 10
-
PL 006-175Page 12 PARTS
Figure 8. Integral Air Filter Set with Adjustable Pressure Regulator
Supply Pressure Gauges (Used With Above Filter Sets) (Shown in Figure 8)
Table 10. Parts for Figure 8
Item Part No. Qty. Part Name
– Below 1 Air Filter Set (items 1-11)B0114BF With copper tube
B0127ZF With polyolefin tube
1 X0172BE 1 Elbow
2 0011962 2 Nut, 0.312-18
3 0025962 2 Lockwasher
4 Below 1 TubeB0114ZT Copper
B0127YH Polyolefin-coated
– X0168FF 2 Shrinkable Tube (used at each end of polyolefin-coated tube)
5 B0114BE 1 Bracket
*6 B0123HE 1 Filter Regulator
7 X0100KW 2 Screw, Hex H., 0.312-18 x 3.750
8 B0110TN 1 Tee
9 0014116 1 Elbow
10 0012354 2 Nut, 0.250-20
11 X0100AG 2 Screw, Hex H., 0.250-20 x 0.500
Table 11. Parts for Supply Pressure Gauges
Item Part No. Qty. Part Name
*12 Below 1 Pressure GaugeP0103YM 0 to 30 psi/0 to 2 bar
P0121BL 0 to 200 kPa/0 to 2 kg/cm2
P0122JD 1 Pressure Gauge (green band)
21 3 4 5 6 7
891011 12
-
PARTS
PL 006-175Page 13
Optional Capsule Assemblies and Gaskets
Table 12. Optional Capsule Assemblies and Gaskets
Range and Material
Capsule Assembly
Item 6 Fig. E821A
Flexure Assembly
Item 7 Fig. E821A
Gaskets, Item 5
Metal 150°C (375°F)
ptfe 121°C (250°F)
glass-filled ptfe 190°C
(375°F)
pair of ptfe cleaned for oxygen or chlorine service
Ranges 0-5 to 0-62 kPa or 0-20 to 0-250 inH2O
316 Stainless Steel N0142NU D0114XZ N0143ZT D0114TP – –
316 ss Fluorolube-filled (oxygen service)
N0148UB D0114XZ N0143ZT – – U0102XB
Tantalum and Nickel Alloy (a)
a. Equivalent to Hastelloy C.
N0151MY D0120KK – D0114TP D0120AB –
Monel N0151PR (b)
b. Metallic process wetted materials conforming to NACE Standard MR-01-75.
D0117NN N0148AW (b) D0114TP – –Monel, Fluorolube-filled (oxygen service)
N0151WD D0117NN N0148AW (b) – – U0102XB
Duranickel and Monel N0151QC D0117NN N0148AW (b) D0114TP – –Nickel Alloy (a) N0150ZP (b) D0120KK – D0114TP D0120AB
316 ss, high viscosity fill N0148UA D0117XZ N0143ZT D0114TP – –
316 ss, gold plated N0148RM – N0143ZT – – –316 ss, Dow 710 filled N0150ZA D0117XZ N0143ZT D0114TP – –
Nickel Alloy (a), Fluorolube-filled (chlorine service)
N0151PA D0120KK – – – U0102XB
Ranges 0-50 to 0-210 kPa or 0-200 to 0-850 inH2O
316 Stainless Steel N0999KP NotRemovable
N0143ZT D0114TP – –
316 ss Fluorolube-filled (oxygen service)
A0129CA N0143ZT – – U0102XB
316 ss, gold plated N0148RN N0143ZT D0114TP – –
Duranickel and Monel D0117NZ N0148AW (b) D0114TP – –Duranickel and Monel, Fluorolube-filled (oxygen service)
A073110 N0148AW (b) – – U0102XB
Nickel Alloy (a) A093756 (b) – D0114TP D0120AB –
316 ss, Dow 710 filled N0150ZB N0143ZT D0114TP – –
Nickel Alloy (a), Fluorolube-filled (chlorine service)
N0150YA – – – U0102XB
Range 0-50 to 0-100 kPa or 0-200 to 0-400 inH2O
Monel A090927 (b) NotRemovable
N0148AW (b) – – –
Table 13. Optional Ermeto Connector
Size 316 Carbon Steel Brass
1/4 NPT x 6 mm U7002AS U7002AT U7002AU
1/2 NPT x 12 mm U7002AP U7002AR U7002AU
-
PL 006-175Page 14 RECOMMENDED SPARE PARTS SUMMARY
Table 14. Optional Output Signal Test Tee
Part No. Qty. Name
D6002BK 2 Nipple
D6002BL 1 Valve
Q0101NE 1 Plug
0040508 1 Tee96000BL 1 Assy Drawing
Recommended Spare Parts Summary
FigureNumber
ItemNumber
PartNumber Part Name
Number of Parts Recommended for
1 Inst. 5 Inst.20
Inst.
The following parts are used in the Instrument Measuring Section:Figure 1 1 Below Vent Screw 0 1 2
B0138MJ 316 ss
B0138MK Monel2 Below Vent Plug 0 1 2
D0161QT 316 ss
D0161QU Monel5 Below Metal Gasket (for 316 ss or Monel Capsules) 2 4 6
N0143ZT 316 ss
N0148AW MonelBelow Plastic Gasket
D0114TP ptfe
U0102XB Pair ptfe (cleaned for oxygen or chlorine service)6 Below Capsule Assembly, 0-20 to 0-250 inH2O, 0-5 to 0-62 kPa 0 0 1
N0142NU 316 ss
N0148UB 316 ss (Fluorolube-filled for oxygen service)N0151MY Tantalum and Nickel Alloy (a)
N0151PR Monel
N0151WD Monel (Fluorolube-filled)N0151QC Duranickel and Monel
N0150ZP Nickel Alloy (a)
N0148UA 316 ss, high viscosity fillN0148RM 316 ss, gold plated
N0150ZA 316 ss, low viscosity fill
N0151PA Nickel Alloy (a), Fluorolube-filled (chlorine service)Below Capsule Assembly, 0-200 to 0-850 inH2O, 0-5 to 0-210
kPa
N0999KP 316 ss
A0129CA 316 ss Fluorolube-filled (oxygen service)D0117NZ Duranickel and Monel
A093756 Nickel Alloy (a)
A073110 Duranickel and Monel (Fluorolube-filled)N0148RN 316 ss, gold-plated
N0150ZB 316 ss, low viscosity filled
N0150YA Nickel Alloy (a) (Fluorolube-filled)
-
RECOMMENDED SPARE PARTS SUMMARY
PL 006-175Page 15
(a)
Figure 1(Cont.)
6(Cont.)
A090927 Capsule Assembly, Monel, 0-200 to 0-400 inH2O, 0-50 to 0-100 kPa
0 0 1
9 U0102ML Gasket 0 1 2
The following gasket is used between the Measuring and Transmission Sections:
Figure 1 12 Below O-ring (gasket) 0 1 2U0102MY Silicone Elastomer (standard)
U0102TK Viton A
U0102XE ptfe (clean for oxygen or chlorine service)15 Below Screen Disc 2 4 12
D0114FL 316 ss
D0117ES Monel16 Below Gasket 2 4 12
D0114RB ptfe (standard)
D0120AC Glass-filled ptfe (to 109°C, 357°F)U0102XC Pair ptfe (cleaned for oxygen or chlorine service)
Figure 2 9 D0123MZ O-ring, 4.5 mm (0.18 in) ID 3 6 9
20 N0143XN O-ring, 15.6 mm (0.61 in) ID 0 0 232 U0119TB Nozzle Assembly 1 1 2
36 D0124QP Orifice Screw Assy (Style E instrument) 1 1 2
37 D0123MZ O-ring, 4.5 mm (0.18 in) ID 1 2 338 A037744 O-ring, 2.9 mm (0.11 in) ID 1 2 3
41 C0136HZ Relay Replacement Kit 1 1 2
42 C0100EM Gasket 1 2 443 U0103FP Screen 2 4 8
47 C0130EF Screw Assembly (prior to Jan. 1974) 1 1 2
48 D0123MZ O-Ring, 4.5 mm (0.18 in) ID 1 2 349 A037744 O-Ring, 2.9 mm (0.11 in) ID 1 2 3
The following regulators are used in the Air Filter Sets:
Figure 7 4 B0123HD Regulator, Fixed Pressure 0 0 1Figure 8 6 B0123HE Regulator, Adjustable Pressure 0 0 1
12 Below Pressure Gauge 0 1 3
P0103YM 0 to 30 psi/0 to 2 barP0121BL 0 to 200 kPa/0 to 2 kg/cm2
P0122JD Green Band
a. Equivalent to Hastelloy C.
Recommended Spare Parts Summary (Continued)
FigureNumber
ItemNumber
PartNumber Part Name
Number of Parts Recommended for
1 Inst. 5 Inst.20
Inst.
-
PL 006-175Page 16
Invensys Systems, Inc. 10900 Equity DriveHouston, TX 77041United States of Americahttp://www.invensys.com
Global Customer SupportInside U.S.: 1-866-746-6477Outside U.S.: 1-508-549-2424Website: http://support.ips.invensys.com
Copyright 1971-2015 Invensys Systems, Inc.All rights reserved.
Invensys, Foxboro, and d/p Cell are trademarks of Invensys Limited, its subsidiaries, and affiliates. All other trademarks are the property of their respective owners.
Invensys is now part of Schneider Electric.
0315
Go Back13A d/p Cell® TransmitterStyles B, C, D and EModel CodePartsFigure 1. Transmitter BottomworksFigure 2. Transmitter TopworksFigure 3. Zero Elevation KitFigure 4. Zero Suppression KitFigure 5. Zero Elevation Kit (For use with Fluorolube-filled or unfilled capsules)Figure 6. Zero Suppression Kit (For use with Fluorolube-filled or unfilled capsule)Figure 7. Integral Air Filter Set with Fixed Pressure Regulator and Mounting SetFigure 8. Integral Air Filter Set with Adjustable Pressure Regulator
Recommended Spare Parts Summary