double tee flooring long span flooring - the light weight solution · 2019-02-21 · double tee...

2
Double Tee Flooring Long Span Flooring - the Light Weight Solution Banagher Concrete Double Tee Flooring is typically 3m wide. Depth can vary from 310 to 1010mm depending on the span required – up to 35m is possible depending on loading. The versatility of design and the experience of our engineers ensures Double Tee flooring can be adapted for a wide range of applications from Reservoirs, Buildings, Transfer Floor, Car Parks to Walls and Footbridges. Double Tee flooring can even be skewed to allow for abnormal frame conditions. The cost benefits of using double tee car park construction are readily apparent because of its lighter weight in relation to span. Also the under- side of the Double Tee provides an attractive architectural feature. DOUBLE TEE FLOORING PROVIDES UNIVERSALLY ACCEPTED BENEFITS TO CONTRACTORS, THE DEVELOPER AND THE DESIGNER » Lighter and more versatile » Cost competitive » Site operations simplified with resulting time savings » Spans over 35 metres possible » Using DT as ramps provides a column free solution » Simplified frame, design and construction » Fire resistance properties » Incorporation of openings for service pipes/ducts » Use of precast elements in frame possible » Low units rates relative to support provided » No temporary propping is required » Accelerated construction time » Greater column free space for Car Parks » Versatile design suitable for a wide range of applications » Shear connection available where no screed required Banagher Precast Concrete Ltd, Banagher, Co. Offaly, Ireland T +353 (0)57 9151417 F +353 (0)57 9151558 E [email protected] W www.bancrete.com PreCAST CONCRETE SPECIALISTS

Upload: others

Post on 03-May-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Double Tee Flooring Long Span Flooring - the Light Weight Solution · 2019-02-21 · Double Tee Flooring Long Span Flooring - the Light Weight Solution Banagher Concrete Double Tee

Double Tee Flooring Long Span Flooring - the Light Weight Solution

Banagher Concrete Double Tee Flooring is typically 3m wide. Depth can vary from 310 to 1010mm depending on the span required – up to 35m is possible depending on loading.

The versatility of design and the experience of our engineers ensures Double Tee flooring can be adapted for a wide range of applications from Reservoirs, Buildings, Transfer Floor, Car Parks to Walls and Footbridges. Double Tee flooring can even be skewed to allow for abnormal frame conditions.

The cost benefits of using double tee car park construction are readily apparent because of its lighter weight in relation to span. Also the under-side of the Double Tee provides an attractive architectural feature.

DOUBLE TEE FLOORING PROVIDES UNIVERSALLY ACCEPTED BENEFITS TO CONTRACTORS, THE DEVELOPER AND THE DESIGNER

» Lighter and more versatile

» Cost competitive

» Site operations simplified with resulting time savings

» Spans over 35 metres possible

» Using DT as ramps provides a column free solution

» Simplified frame, design and construction

» Fire resistance properties

» Incorporation of openings for service pipes/ducts

» Use of precast elements in frame possible

» Low units rates relative to support provided

» No temporary propping is required

» Accelerated construction time

» Greater column free space for Car Parks

» Versatile design suitable for a wide range of applications

» Shear connection available where no screed required

Banagher Precast Concrete Ltd, Banagher, Co. Offaly, IrelandT +353 (0)57 9151417 F +353 (0)57 9151558 E [email protected] W www.bancrete.com

PreCAST CONCRETE SPECIALISTS

Page 2: Double Tee Flooring Long Span Flooring - the Light Weight Solution · 2019-02-21 · Double Tee Flooring Long Span Flooring - the Light Weight Solution Banagher Concrete Double Tee

Double Tee loAD / SPAn TAble using Sample Sizes

PreCAST CONCRETE SPECIALISTS

Table to be used as a guide only. Larger spans and efficiencies in depth can be achieved through specific design of the quantity and position of prestressing strand.

Manufactured to ISO9001/2000. Designed to EN206/EC2

FURTHER TECHNICAL INFORMATION

Specifications for the design, manufacture, transport and erection of all

precast products and standard details for typical precast elements are

available. Please contact us on the number listed where our experienced

and qualified staff will be pleased to discuss your requirements,

alternatively contact us via our website at www.bancrete.com.