door configuration #8 · door configuration #8 ... sandcast arched 11⁄2” x 11” non-keyed...
TRANSCRIPT
ADDENDUM HFOR 2017-2018 MULTI POINT LOCK TRIM PRICE BOOK
DOOR CONFIGURATION #8
American Cylinder Hub Above Handle51/4” Center to Center
ref. Neuma Doors®
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
DOOR CONFIGURATION #8 ref. Neuma Doors®
• Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding “W” to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
To order: (W) Product Code + Lever Style + Handing + Finish Code
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside
1851
185218531854
1861
186218631864
SANDCAST BRONZE PLATES, RECTANGULAR STYLE
See back page of this addendum for Sandcast Bronze lever options.
$216.00
METRIC KNOB
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside
18A1
18A218A318A4
18B1
18B218B318B4
STAINLESS STEEL PLATES, MODERN STYLE
See back page of this addendum for Stainless Steel lever options.
$194.00
Stainless Steel11⁄2” x 11” Non-KeyedAthena Levers
Stainless Steel2” x 10” KeyedDresden Levers
Sandcast Rectangular2” x 10” KeyedTeton Levers
Sandcast Rectangular11⁄2” x 11” Non-KeyedLariat Levers
Stainless Steel (SS)
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)
2
ref. Neuma Doors® DOOR CONFIGURATION #8
• Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”.• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding “W” to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
To order: (W) Product Code + Lever Style + Handing + Finish Code
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside
1811
181218131814
1821
182218231824
SANDCAST BRONZE PLATES, ARCHED STYLE
See back page of this addendum for Sandcast Bronze lever options.
$216.00
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside
1831
183218331834
1841
184218431844
LOST WAX CAST BRONZE PLATES, TUSCANY STYLE
See back page of this addendum for Lost Wax Bronze lever options.
$216.00
Sandcast Arched11⁄2” x 11” Non-KeyedCimarron Levers
Sandcast Arched2” x 10” KeyedDurango Levers
Bronze Tuscany11⁄2” x 11” Non-KeyedOctagon Levers
Bronze Tuscany2” x 10” KeyedMedici Levers
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)
Flat Black Bronze (FB)Medium Bronze (MB)
3
DOOR CONFIGURATION #8 Specification Sheet for Components and Door Thickness
Door Configuration #8 American Cylinder Above Handle 5 1/4” Center to Center
Steel Spindle
Rosette Screws
Cylinder Tailpiece
Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Standard Components:• Single Cylinder Tailpiece• 3 3⁄4” Steel Spindle• 1 1/2” Rosette Screws
Standard Components:• Thumbturn Tailpiece• 3 3⁄4” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 1 1/2” Rosette Screws
Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in
Standard Door Thickness: 13/4”
Standard Door Thickness: 13/4”
CONSTRUCTION KEYING
Charge for Construction Keying - $3.00 (NET)• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.
Charge for Re-Keying - $2.00 (NET) per Cylinder• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.
Keying to Code• Order by indicating “Key Code XXXXX “ next to applicable locks.
Keying Alike• Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted.• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.
Construction devices used on one or more of last four positions.
Dimples drilled in plug in this position.
• Lost ball system. • Last four pin locations drilled for lost ball application. • Master key pins used for code variability. • Construction keys and owner keys sent separately. • Order by indicating “Construction Keyed, House #_” next to applicable locks.
8 7/8"5 1/4"
1 5/8"
4
Specification Sheet for Trim and Cylinder Styles DOOR CONFIGURATION #8
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Neuma Doors®
5
FixedFixed
2” x 10” Plates, Product Codes 1822, 1842, 1862, 18B21 1⁄2” x 11” Plates, Product Codes 1812, 1832, 1852, 18A2
Non-Keyed, Passage (for Semi-Active Door)
1 1⁄2” x 11” Plates, Product Codes 1813, 1833, 1853, 18A3 2” x 10” Plates, Product Codes 1823, 1843, 1863, 18B3
Non-Keyed, American Style Thumbturn Inside (for Active Door)
2” x 10” Plates, Product Codes 1824, 1844, 1864, 18B41 1⁄2” x 11” Plates, Product Codes 1814, 1834, 1854, 18A4
Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
2” x 10” Plates, Product Codes 1821, 1841, 1861, 18B11 1⁄2” x 11” Plates, Product Codes 1811, 1831, 1851, 18A1
Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
ADDENDUM HFOR 2017-2018 MULTI POINT LOCK TRIM PRICE BOOK
LEVER OPTIONS
FINISH OPTIONS
EMTEK Products, Inc. 15250 E Stafford Street
City of Industry, CA 91744 Tel: 800-356-2741 626-961-0413
Fax: 800-577-5771 626-336-2812 emtek.com
Cologne Lever(CO)
Poseidon Lever(PO)
Stuttgart Lever(STT)
Dresden Lever(DD)
Kiel Lever(KL)
Athena Lever(AT)
Hercules Lever (HS)
Helios Lever(HL)
Hermes Lever(HES)
Stainless Steel
Medici Lever (MDI)
Napoli Lever (NA)
Octagon Lever (OCL)
Padua Lever (PD)
Lost Wax Cast Bronze
Sandcast Bronze
Cody Lever (CD)
Durango Lever (D)
Lariat Lever (LR)
Montrose Lever (MT)
Cimarron Lever (CR)
Yuma Lever (YM)*
Teton Lever (TT)
Aurora Lever (AR)
The door manufacturer listed under this configuration is for reference only and is subject to change. Some retrofitting may be necessary. Please carefully measure and identify your hardware using the diagram listed on page 4. Neuma Doors® is a registered trademark of Nan Ya Plastics Corporation.
Stainless Steel (SS)
Tumbled White Bronze (TWB)
Flat Black Bronze Patina (FB)
Medium BronzePatina (MB)
Bronze Patina is a living finish that will gracefully age, revealing the underlying bronze over time. Because of this characteristic, no finish warranty is offered on bronze patina products.
Emtek offers Type 304 stainless steel on all designated Stainless Steel products including levers, knobs, trim plates, and rosettes. Emtek’s Stainless Steel carries a five-year finish warranty. All stainless steel will require some periodic cleaning to keep your hardware looking like new.
* For Single Door Application Only.