dls62 architectural led edge-lit exit sign with battery … · catalog # project comments type date...

1
Catalog # Project Comments Type Date PRODUCT SPECIFICATION DATA DLS62 DLS62 R BA 2 EXAMPLE: ORDERING INFORMATION Letters Face 1118 E 223rd St., Carson CA 90745 Toll Free 1.800.441.4422 Tel 1.323.934.7779 Fax 1.323.934.9886 Design :Quality :Eco Friendly Issued 071915 DIMENSIONS A: B: C: D: 3 1/8(79 mm) 1¾” (45 mm) 8” (203 mm) 13 1/8” (333 mm) R: Red G: Green Blank: Single 2: Double BA: Brushed Aluminum DLS62 Architectural LED Edge-Lit Exit Sign with Battery Backup D A C D B DLS62 series is ideal for applications requiring a decorative edge-lit sign. Suitable for commercial and institutional facilities where energy saving operation and long service life is required. FEATURES - Injection molded, acrylic clear panels, ultrasonically welded to eliminate visible hardware - Brushed aluminum housing available - High grade slim injection molded, V-O flame resistant, high-impact thermo-plastic housing - Removable silk screen chevron design meets all local and state codes - Single or Double face - Letters (Green or Red) measure 6” high - Automatic solid state charger and automatic reset - Solid state short circuit and overload protection - Universal mounting - top/side/wall - One year full warranty OPERATION The exit sign is continuously illuminated by normal AC power. Whenever normal AC power fails, the internal solid state transfer switch automatically connects internal battery to the LED lamps inside the exit sign to keep it continuously lit for 90 minutes. When AC power is restored, the battery is recharged by the onboard solid state recharger and is accomplished within 12 hours. Housing www.dmflighting.com Product Code LISTINGS - UL listed for damp location - UL/cUL listed LAMPS LED lamps (Green or Reds) mounted on circuit boards with expectancy life over 10 years. Operates in both AC and DC input modes. Energy consumption is 5 watts. ELECTRONICS Dual voltage input 120V or 277V. Exit unit is provided with test switch and charge rate indicator for automatic reset. BATTERY Sealed, maintenance free nickel cadmium battery that provides 90 minutes capacity to the lamp, 24 hour recharge after 90 minutes discharge.

Upload: lamkhue

Post on 23-Jul-2018

219 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: DLS62 Architectural LED Edge-Lit Exit Sign with Battery … · Catalog # Project Comments Type Date PRODUCT SPECIFICATION DATA DLS62 DLS62 EXAMPLE: R BA 2 ORDERING INFORMATION Letters

Catalog #

Project

Comments

Type

Date

PRODUCT SPECIFICATION DATA

DLS62

DLS62

R BA 2EXAMPLE:

ORDERING INFORMATION

Letters Face

1118 E 223rd St., Carson CA 90745Toll Free 1.800.441.4422 Tel 1.323.934.7779 Fax 1.323.934.9886

Design :Quality :Eco FriendlyIssued 071915

DIMENSIONS

A: B:

C: D:

3 1⁄8” (79 mm)

1¾” (45 mm) 8” (203 mm)

13 1⁄8” (333 mm)

R: RedG: Green

Blank: Single2: Double

BA: Brushed Aluminum

DLS62Architectural LED Edge-Lit

Exit Sign with Battery Backup

D

A C

D

B

DLS62 series is ideal for applications requiring a decorative edge-lit sign. Suitable for commercial and institutional facilitieswhere energy saving operation and long service life is required.

FEATURES- Injection molded, acrylic clear panels, ultrasonically welded to eliminate visible hardware- Brushed aluminum housing available - High grade slim injection molded, V-O �ame resistant, high-impact thermo-plastic housing - Removable silk screen chevron design meets all local and state codes- Single or Double face- Letters (Green or Red) measure 6” high- Automatic solid state charger and automatic reset- Solid state short circuit and overload protection- Universal mounting - top/side/wall- One year full warranty

OPERATION

The exit sign is continuously illuminated by normal AC power. Whenever normal AC power fails, the internal solid state

transfer switch automatically connects internal battery to the LED lamps inside the exit sign to keep it continuously lit for 90

minutes. When AC power is restored, the battery is recharged by the onboard solid state recharger and is accomplished within

12 hours.

Housing

www.dm�ighting.com

Product Code

LISTINGS

- UL listed for damp location

- UL/cUL listed

LAMPS

LED lamps (Green or Reds) mounted on circuit boards with expectancy life over 10 years. Operates in both AC and DC

input modes. Energy consumption is 5 watts.

ELECTRONICS

Dual voltage input 120V or 277V. Exit unit is provided with test switch and charge rate indicator for automatic reset.

BATTERY

Sealed, maintenance free nickel cadmium battery that provides 90 minutes capacity to the lamp, 24 hour recharge after

90 minutes discharge.