dk plywood_dryer_resin kettle (1)

7/29/2019 DK Plywood_Dryer_Resin Kettle (1)

1/4

EXPORTERS, MECHANICAL & STRUCTURAL ENGINEERS

Mfg. of: Plywood, Rubberized Coir foam and, Bamboo Processing Machineries.

GRAM: GRATEFUL. PHONE: 2555-7142. TELE FAX: (033)2555-8976. E-mail: [email protected]. . Website: www.bsengg.com

117, Raja Dinendra Street, Kolkata-700 004, IndiaPage 1 of 4

Ref. No.: BSE/SS/010/12-13 Dated: 18/ 02/ 2013

To,M/s. D. K. PLYWOODB R B AUTO CENTREIOC PETROL PUMPGIDDEBAHA: 152101MUKTSAR, PUNJABEmail: [email protected]

Kind Attn.: Mr. NEERAJ BANSAL

Dear Sir,As per your inquiry & discussions further had with you, we are pleased to submit our Quotation forVeneer Dryer & Resin Kettle for your perusal.

1. Energy Saving Jet Roller Veneer Dryer

The Jet Ventilated Automatic Roller Track Veneer Dryer is of different sections on the basis ofproduction requirement. The Roller dryer is fitted with specially designed Jet Box for uniform air jedrying. The machine is ideal for drying veneers of varying thickness having varying moisturecontents.

Salient Features:

Have Compact Drying Chambers, Cooling Section & Single Roller Veneer Feeding Deck

Fitted with Dynamically Balanced Aluminum Alloy Axial Flow Propellers

Fixed guide-vanes are provided in front of the propellers to make the air flow parallel to theheating batteries.

Note: Picture do not indicate actual machine quoted


2/4





Double row Jet Nozzles for Top & Bottom of each deck throughout the length of the dryerensures uniform drying of veneer

Complete with Motors, Starters, Temperature Indicator, Chain and Gear Box. Dynodrive (Infinitely Variable Speed Unit) can control the drying time from 3 - 40 minutes

The entire outside covering of the dryer is perfectly insulated with heat resisting insulatedlayer of 100 mm thick all round. Intermediate baffle sheets are provided to eliminate sliding ofinsulation materials due to vibration

These Machines are Energy Saving with Low Power consumption and High Rate ofProduction.

Less maintenance is required for this type of Dryers with no Veneer Jamming leading tolesser Downtime.

Technical details (4600mm Roller Length; 4inch Roller Dia)Particulars Units 4 Section 3 Deck

Heat Requirement

Dry steam @ 120 psi (kg/hr) 700

Thermic oil @ 250 280 0C (kcal/hr) 3,00,000

Power Requirement

Heating section (HP)(2Nos. x 5.0),(2Nos. x 3.0)

Cooling section (HP) (1No. x 1.5)

Conveyor drive unit (HP) (1No. x 3.0)

Drying chamber Length (mm) 8000

Total Dryer Length (mm) 12175

Production capacity (oil)(on 2 mm basis for 24 hrs)

(sq.ft.2) 1,20,000

PRICE (Rs.) 20,00,000


3/4





2. RESIN KETTLE

BS Make Resin Kettle made out of Double jacketed design of sturdy Stainless Steel sheet of 5mmthickness for inner shell and 8mm thickness Mild Steel of outer shell. The machine is fitted withanchor type agitator. Complete with 1 No. 5.0 HP Motor and Gear Box, digital temperature indicatorand electric panel box. The Machine has Horizontal Condenser and comes fitted with Charging andsampling points. Civil foundation to be done by client as per our drawing

PRICE:

2.5 Ton Capacity - Rs. 5, 75,000/- (Rupees Five Lakh Seventy Five Thousand Only) Net Each.

ABOVE PRICES ARE NET EXABOVE PRICES ARE NET EXABOVE PRICES ARE NET EXABOVE PRICES ARE NET EX----FACTORY KOLKATA, DUTIES, TAXES, PACKINGFACTORY KOLKATA, DUTIES, TAXES, PACKINGFACTORY KOLKATA, DUTIES, TAXES, PACKINGFACTORY KOLKATA, DUTIES, TAXES, PACKING

AND FREIGHTAND FREIGHTAND FREIGHTAND FREIGHT WILL BEWILL BEWILL BEWILL BE EXTRA AT THE TIME OF DELIVERY.EXTRA AT THE TIME OF DELIVERY.EXTRA AT THE TIME OF DELIVERY.EXTRA AT THE TIME OF DELIVERY.

DELIVERY: Dryer delivery within 2 months from receipt of advance, subject to Force-Majuere Clause

PAYMENT: 30% as advance along with order and balance payment along with C-Form,12.36% Excise Duty & 2% CST will have to be made before final delivery. The payment termis a guide line of the above delivery schedule.

ERECTION & COMMISSION: Will be supervised by our technical persons along with semi-skilled and un-skilled labor provided by you at your cost, as & when required. The Boarding/lodging, up and down journey fare of our technical person along with their out of pocketexpenses during their stay at your place will be borne by you at your cost. All localconveyance charges will be borne by you at your cost.


4/4





TRANSIT INSURANCE: All cost involved for insurance will be on buyer's account. We do

not accept any responsibility for any loss or damage which may occur after dispatch of goodsfrom our works.

TRANSPORTATION: To- Pay at Extra. Transporter to be nominated by customer

OTHER TERMS AND CONDITIONS:

1. Electrical components including supply of cable layout will have to be carried out at yourcost. If any problem in the Motors & A.C. Drive arises during warranty period the componentwill be serviced by local CGL dealer.

2. Electrical components including supply of cable layout will have to be carried out at yourcost.

3. We reserve the right to alter design/specification for quoted items to whatsoever extentrequired in the light of later development subject to the condition that overall performanceof the equipments remain unaltered.

4. If the dryer is run on steam heating, the steam trap, strainer, and piping etc. will have to beborne by you at your cost.

5. Necessary Welding set along with the Electrodes and other tools and tackles and requiredelectrical supply at site will be borne by at your cost.

6. In case of price escalation of raw materials for manufacturing the machines as welas bought out materials, differences of such escalation shall be charged extra before

dispatch.7. Order once received along with advance will not be refunded at any cost or will not be

adjusted against any other machines. We provide a guarantee for 12 months of oumachines against any manufacturing defect from the date of delivery.

8. Pictures shown in the quotation are indicative and do not represent the actual machine.9. Any Local charges or authority taxes at site is beyond our scope.10. We provide a guarantee for 12 months of our machines against any manufacturing defect

from the date of delivery.11. The offer is valid for 30 days from date and thereafter it is subject to our confirmation and

acceptance.

Thanking you,Yours faithfully,

For, B S Engineering Corporation

dk plywood_dryer_resin kettle (1)

Documents