To purchase your copies please contact:BCSA +44 (0) 207 839 8566 or SCI +44 (0) 1344 636505

www.steelconstruction.org www.steel-sci.org

Essential aids forEurocodes and CE Marking

Steel Building Design: Design Data,In accordance with Eurocodes andthe UK National Annex - P363This edition of the Blue Book provides resistances inaccordance with the UK version of Eurocode 3 (parts1-1, 1-5, and 1-8) together with its UK National Annexes.It includes member resistance tables for steel membersin compression, bending and tension. Tables are alsoprovided for combined bending and compression, webresistance and shear resistance. Section property datais included for rolled I sections, ASB sections, channels,angles and hollow sections. Resistances are also givenfor common member types, ordinary (non pre-loaded)bolts, pre-loaded bolts and welds.

Price 80.00(BCSA and SCI member price 60.00)

Steel Building Design:Introduction to the Eurocodes P361For designers using the Eurocodes for the firsttime, this publication offers an overview of theEurocode standards and the national annexesthat implement them. It addresses the basis ofstructural design and the combination of actions(loads) that should be considered and introducesthe aspects of detailed design for steelworkaccording to Eurocode 3 and compositeconstruction according to Eurocode 4.

Price 20.00(BCSA and SCI member price 10.00)

Steel Building Design: ConciseEurocode P362This guide simplifies the apparent complexityof the Eurocodes for steel design, providingthe designer with a digestible approach tocommon tasks.Guidance is presented on design routes, withreferences to Eurocode clauses. Formulae areconverted into look-up tables and design tipsare highlighted. The compilation includes therelated provisions in the UK National Annexesand appropriate non-contradictorycomplementary information.

Price 50.00(BCSA and SCI member price 25.00)

Steel Building Design: workedexamples open sections P364For designers of steel building structures in theUK, this publication offers a series of workedexamples of design to the Eurocodes. Theexamples illustrate the Eurocode approach todesign and have full references to the relevantclauses and appropriate NCCI. The examplescan serve as templates for designers to use fortheir own design when using open sections,such as beams and columns.

Price 50.00(BCSA and SCI member price 25.00)

Steel Building Design: WorkedExamples Hollow Sections P374This publication offers designers of steelbuilding structures in the UK, a series ofexamples of design to the Eurocodes. Theexamples illustrate the Eurocode approach todesign using structural hollow sections andhave full references to the relevant clausesand appropriate NCCI. The examples canserve as templates for designers to use fortheir own design. This publication covers theuse of structural hollow sections.

Price 20.00(BCSA and SCI member price 10.00)

Steel Building Design: MediumRise Braced Frames P365For new designers, this guide provides anintroduction to the major features of multi-storey design. For more experienceddesigners, the guide illustrates the keychanges when designing to the Eurocode,in particular the revised approach to framestability. A worked example showing thedesign of the major elements is included.

Price 40.00(BCSA and SCI member price 20.00)

Eurocode Load Combinations forSteel StructuresThis design guide explains the Eurocode loadcombinations for steel structures based on therecommendations given in BS EN 1990 Eurocode -Basis of Structural Design and BS EN 1991Eurocode 1 Actions on Structures.Straightforward guidance is given on the loading andload combinations for both the serviceability andultimate limit states for the following building types: Multi-storey buildings Simple construction Multi-storey buildings Continuous construction Portal frames without cranes Portal frames with cranes

Price 15.00(BCSA and SCI member price 11.25)

National Structural SteelworkSpecification for BuildingConstruction 5th Edition(CE Marking version)This edition of the National StructuralSteelwork Specification is fully compliant withthe new European standard for fabrication, BSEN 1090-2 and the CE Marking standard BSEN 1090-1. This new version does notsupersede the earlier version of the NSSSwhich still remains current for thoseapplications which do not require CE Marking.

Price 25.00(BCSA and SCI member price 18.75)