digi embedded training - Компэл · digi embedded training technical training november 2012 ....
TRANSCRIPT
Digi Embedded Training
Technical Training
November 2012
Session take away
• Understand Digi Embedded Benefits & Advantages
• Know which modules are available – Most important features
– Application selection
• Where to get product info
• How and where to get support from Digi
Solutions on Module
Core modules with wired and wireless
network connectivity
Pre-certified secure 802.11a/b/g/n wireless
Long-term availability
Future-proof embedded M2M gateway module
Pre-certified solution, universal 3G connectivity,
GPS and Ethernet
Ultra-compact wired and wireless
embedded device servers
Plug-and-play or C/C++
functionality, extended set of on-chip interfaces
Digi Wired and Wireless Solution-on-Modules
ConnectCore™ for Freescale i.MX ConnectCore™ 3G Digi Connect®
1-3 months design cycle 2-4 months design cycle 3-6 months design cycle 3-9 months design cylce
Complexity of Design / Time to market
100Ku+
- >10Ku
Module
Chip
Simple Ser. to Ethernet Simple dig. I/O NS9210 Based
ARM7 Based 32 bit processors NS7520 (not for new designs)
3-6 months design cycle 6-12 months design cycle 9-15 months design cycle
Rabbit 8/16 bit processors
Pro
duct
Volu
me
5Ku+
- 2Ku - <
500u
Rabbit Minicore/SBC R4000/R5000/R6000 Based
ARM9 Based 32 bit processors NS9210/9215
XBee PTP / ZigBee / DigiMesh Modules
ConnectCore 9P NS9215 Based
ConnectCore
Wi-i.MX51/53
Digi Embedded Solutions
ConnectCard
Wi -i.MX28
• Combine common embedded components • Simplify embedded product design • Eliminate placement of fine pitch BGA components • Reduce overall cost of board
• Pre-configured software support • Totally eliminate HW/SW Integration step
• Development Kit with Software Tools • No additional tools to buy
• Add-on Application Kits • Support for common applications
• Drastically reduce: • Initial NRE costs • Time to market
Embedded Module Benefits
Partners
Design Services
Products
Manufacturing
Company Founded in
1985 Global
Presence
Publicly Traded (NASDAQ: DGII)
Stable, No Debt
Strong Cash Position
Low-Volume / Specialty: In-House Manufacturing
High-Volume: Contract Manufacturers
(ISO 13485 Certified)
Out-of-Box Solutions
Software Support
Long-Term Availability
Pre-Certified Hardware
Design Reviews
Product Customization
Custom Development
Channel Services Technology Suppliers
Technology iDigi Scalable Device Cloud Platform
Application Development Services Wireless
802.11abgn
ZigBee, Bluetooth
Cellular
Satellite
Process Control ISO 9001 Certified
Design Control
Quality Control
Product Change Control
Customer Approval
Customer Notification
5-Year Warranty
Digi Embedded Products Digi Value Proposition
Total Val
Antenna Design
Certification Support
Embedded Product Lifecycle Product Availability Goals
Launch 1 year
Production 3-5 years
Not For New Designs
2-3 years
Last Time Buy
1 year
7-10 Years
Digi Embedded Processor Product Line
NET+ARM Microprocessors
• ARM processors with integrated Ethernet MAC for on-board solutions
• Complete Development Kits available for high-volume applications
• Used in Digi Embedded modules to provide long-term availability
JTAG Test and Debug
4K
ARM926EJ-S
Up to 150 MHz
4k I-Cache / 4k D-Cache
ARM
I/O Hub
10 Timers/ Counters
or 4 PWM
IRQ
ADC
12b-8ch Boot SPI
GPIO
Bus Arbiter
Ext. Peripheral Controller
GP
IO
Memory Controller
UA
RT
I2C
Flexible
Interface
Module
Pro
gra
m
Mem
ory
Data
Mem
ory
Flexible
Interface
Module
Pro
gra
m
Mem
ory
Data
Mem
ory
Power Management
Vectored Interrupt Controller
Qu
ad
ratu
re
Deco
der
75 MHz AHB Bus
32-Bit A/D
Real-Time Clock
NVRAM 64 Byte
UA
RT
UA
RT
UA
RT
PLL CLK Generator
AES Accelerator
10/100 Ethernet MII MAC
10/100 Ethernet MII MAC G
PIO
NS9215 265-pin BGA package, 15x15 mm, 0.18µ process
JTAG Test and Debug
4K
ARM926EJ-S
75-150 MHz
4k I-Cache / 4k D-Cache
ARM
I/O Hub
10/100 Ethernet MII MAC
9 Timers/ Counters
or 4 PWM
IRQ
Boot SPI
GPIO
Bus Arbiter
Ext. Peripheral Controller
GP
IO
Memory Controller
UA
RT
I2C
AES Accelerator
Flexible
Interface
Module
Pro
gra
m
Mem
ory
Data
Mem
ory
Flexible
Interface
Module
Pro
gra
m
Mem
ory
Data
Mem
ory
Power Management
Vectored Interrupt Controller
Qu
ad
ratu
re
Deco
der
75 MHz AHB Bus
32-Bit A/D
UA
RT
UA
RT
UA
RT
PLL CLK Generator
JTAG Test and Debug
4K
ARM926EJ-S
Up to 150 MHz
4k I-Cache / 4k D-Cache
ARM
I/O Hub
10/100 Ethernet MII MAC
10 Timers/ Counters
or 4 PWM
IRQ
Boot SPI
GPIO
Bus Arbiter
Ext. Peripheral Controller
GP
IO
Memory Controller
UA
RT
I2C
AES Accelerator
Flexible
Interface
Module
Pro
gra
m
Mem
ory
Data
Mem
ory
Flexible
Interface
Module
Pro
gra
m
Mem
ory
Data
Mem
ory
Power Management
Vectored Interrupt Controller
Qu
ad
ratu
re
Deco
der
75 MHz AHB Bus
32-Bit A/D
UA
RT
UA
RT
UA
RT
PLL CLK Generator
GP
IO
NS9210 177-pin BGA package, 13x13 mm, 0.18µ process
NS9210/NS9215 Feature Overview
• ARM926EJ-S @ up to 150 MHz • 4k data/4k instruction cache • Can operate at 1x or 2x AHB bus speed • and change on the fly
• Industrial operating temperature
• -40 to 85°C
• 2 x Flexible Interface Modules • DRPIC1655X CPU Cores
• 8-bit, x4 bus clock (300 MHz max) • 192 Bytes Data RAM • 1 KB Program RAM
• Low-power modes
• Sleep mode • Low-speed operation • Configurable wake-up events
• 10 Timers/Counters or 4 PWM
• Timers/counters with external I/O
• Quadrature Decoder
• 10/100 Ethernet MAC
• 4 x UARTs • Up to 1.8 Mbps
• Real-Time Clock and NVRAM
• 64 Bytes, battery backup
• A/D Converter • 12 Bit, 8 MHz sample • 8 channels, 1 MHz sample
• NIST-certified AES Encryption Engine
• 128-, 192-, 256-bit keys • ECB, CBC, CFB, OFB, CTR, CCM cipher
modes
• I2C Fast-Mode Interface
• SPI with serial boot
• 4 External Level/Edge IRQ Inputs
• 2 External DMA Channels
Digi Embedded Modules Product Line
Digi Embedded • Network-enabled System-on-Module Solutions
• Integrated 802.11abgn networking options • Additional Bluetooth options on upcoming modules • Dual-Ethernet (2 x MAC) options
• Designed for long-term availability (7-10 years) • Freescale i.MX automotive application processors • Selected wireless LAN radio components • Long lifecycle connectors with multiple supplier options
• Easy design integration and quick time-to-market • Design flexibility without the traditional design complexity • Complete out-of-the-box software platform support
• Windows Embedded CE, Linux, Android, 3rd Party • Pre-certified system on module solutions
• Emissions, immunity, safety, vibration, shock, etc. • High quality and reliable process control
• Industrial operating temperature supported • Including strong five-year hardware warranty
Module Certifications • Module certifications for unintentional radiation,
immunity, and safety minimize design risk and significantly accelerate product development cycle – FCC Class B, IC, CE, VCCI, UL/UR
• Entirely pre-certified WLAN radio further simplifies product development and integration process – Eliminates intentional radiation (radio) related certification cost
• Estimated cost of combined 802.11a/b/g approval for North America, EU and Japan is ≥ US$50k
– No radio design or homologation expertise required
– No approval maintenance or monitoring of worldwide regulatory changes
– Customers able to add antenna options to existing Digi certifications with only minimal extra cost
Module Architecture CPU Clock
(Max)
Digi Connect ME / Wi-ME ARM7 55 MHz
Digi Connect ME 9210 ARM9 75 MHz
Digi Connect Wi-ME 9210 ARM9 75 MHz
Digi Connect EM / Wi-EM / SP / Wi-SP ARM7 55 MHz
Digi Connect Wi-Wave Rabbit 6000
ConnectCore 9P 921x Family ARM9 150 MHz
ConnectCore 9P 9360 ARM9 155 MHz / 177 MHz
ConnectCore 9C / Wi-9C ARM9 155 MHz
ConnectCore for i.MX5x Cortex-A8 600 MHz / 800 MHz
800 MHz / 1 GHz
ConnectCard i.MX28 ARM9 454 MHz
Digi Embedded Modules Overview
Digi Embedded Modules Application / Performance Index
Connect ME 9210 Connect Wi-ME 9210
ConnectCore Wi-9P9215 / 3G
ConnectCore Wi-i.MX51
ConnectCard for Wi-i.MX28
ConnectCore Wi-i.MX53
Low-end networking
Industrial Automation (incl. CAN)
“Workhorse” Networking
High-Performance
HMI
Ultra Performance
HMI
Modules with CAN support for IA applications: • Connect ME9210 / Wi-ME9210 (FIM) • ConnectCore 9P9215 / Wi-9P9214 (FIM) • ConnectCore i.MX28 / Wi-i.MX28 • ConnectCore i.MX53 / Wi-i.MX53
ConnectCore V (2H2013)
Cortex A5 / M4
ConnectCore 6 (2013)
Quad-Core Cortex A9
Digi Connect
Connect ME Connect Wi-ME
Low-end networking
Industrial Automation (incl. CAN)
“Workhorse” Networking
High-Performance
HMI
Ultra Performance
HMI
Digi Connect ME / Wi-ME 9210
High-performance, ultra-compact wired and wireless modules combine Ethernet networking, on-chip security and interface flexibility.
• Instant secure network connectivity
• Pre-certified 802.11bgn wireless module
• ARM9 application processing
• Compact RJ-45 form factor
• Pin-compatible family of module solutions
• Support for Digi NET+OS and Linux
Medical Devices
Power Distribution
Security/Surveillance
Industrial/Building Automation
Key Verticals/Applications
Key Features / Benefits
• Digi Connect ME® 9210,
Digi Connect® Wi-ME 9210
• Digi Connect ME®, Digi Connect® Wi-ME
Models Digi Connect® Modules
Digi Connect ME / Wi-ME 9210 Needs Solution Benefits
• Network connectivity for legacy medical equipment
• Digi Connect ME 9210 or • Digi Connect® Wi-ME 9210
• Cost-effective network connectivity solution
• Interchangeable wired/wireless solution
28
• Digi Connect ME form factor and pin-out compatibility
• Fully 802.3af compliant power pass-thru
• Performance improvements
• 75 MHz NS9210
• AES accelerator
• 921k UART
• Additional interface flexibility
• SPI port available
• FIM/PIC interfaces, without losing primary UART
• UART, 1-Wire, USB device, CAN, others
Connect ME 9210 Benefits
Digi Connect Wi-ME 9210 Benefits
• Digi NS9210 processor
– Up to 75 MHz clock speed
• Up to 8 MB flash / 16 MB SDRAM
• Digi Connect ME 9210 form factor
• Integrated 802.11bgn WLAN
– Up to 65 Mbps data rates
– Same radio technology as ConnectCore i.MX51
• Power management capabilities
– Digi NS9210 clock scaling
– Reduced Wi-Fi radio current draw
– Full proceed speed with 54 Mbps Wi-FI transmit: 483mA @ 3.3V
• Operating temperature -40 to 80C
– Higher possible with thermal management (HRM will provide guidance)
• Software platform support
– NET+OS 7.x
– Digi Embedded Linux 5.7
– Currently no plans to support Digi Plug-and-Play firmware
30
Simplified JSK Development Board
Support for Connect ME / Wi-ME / ME 9210 Will be used in entire Connect ME family
Improved Usability
Connector placement Fewer switches Descriptive silk screening
Functional Enhancements
Prototype area
Transceiver on/off
Power switch
PoE through external PoE module
Connect ME NS9210 Development Board
Exclusive Advantages Pin-compatible family of wireless and wired modules
Connect Wi-ME is 0.5 inches (1.27cm) longer Connect Wi-ME 9210 has the same size as Connect ME All other dimensions identical Ultra-compact form factor
Digi ConnectCore 9P/9C
ConnectCore Wi-9P9215 / 3G
Low-end networking
Industrial Automation (incl. CAN)
“Workhorse” Networking
High-Performance
HMI
Ultra Performance
HMI
• Compact design for space-efficient designs
• Wide range of processor peripheral signals available on connectors
• Precisely designed processor & memory subsystem for optimum performance
• Digi NS9215 ARM9 processor and software drivers for long-term availability
Compact core for powerful, flexible embedded design
ConnectCore 9P9215 Features and Benefits
A powerful ARM9 core module with application processing, secure networking and
real-world interface capabilities.
ConnectCore 9P 9215 Overview
• NET+ARM NS9215 Processor – ARM926EJ-S ARM core – 150 MHz, 32-bit – Bus Speed 75 MHz max – 4K data/instruction caches
• Application Memory – 8/16/32 MByte SDRAM – 2/4/8/16 MByte NOR Flash
• Integrated Software Support – Digi NET+OS 7.5 – Digi Embedded Linux
ConnectCore 9P 9215 Application Processing
• 10/100 Ethernet on Module
– MAC on NS9215
– PHY on module
– Optional RJ-45 with magnetics
• AES Encryption Engine
– Hardware on NS9215
– NIST certified
– 128, 192 and 256-bit keys
– Range of encryption methods
• NET+OS Secure Networking
– SSL Support improved
– SSHv2 encryption protocol support
– Automatically detects AES Engine
ConnectCore 9P 9215 Secure Networking Support
• Memory Bus – 17 bit address, 16-bit data
• Digital System Peripherals – Up to 4 serial UARTs (1.8 Mbps max) – I2C Fast-Mode Interface – SPI with Boot Support – 4 External IRQ Inputs – 2 External DMA channels – Up to 64 GPIO – Real-Time Clock
• Analog Input Capabilities – A/D Converters
• 12 bit, 8 MHz Sample • 8 channels, 1 MHz sample
– 10 Timers/counters or 4 PWM channels – Quadrature decoder
ConnectCore 9P 9215 Real-World Interface Capabilities
• Industrial Temperature Range
– -40 to +85 C
• Compact Form Factor
– 48mm x 48 mm
– 2 x 80 pin connectors
• Certifications
– Emissions/Immunity
• FCC Class B, CE
– Reliability
• NEMA Vibration/Shock
ConnectCore 9P 9215 Additional Module Features
• Available:
– Flexible Interface Modules
– SSHv2 with AES Acceleration Engine
– Power Management Features
– LCD controller through memory bus interface:
• Color 320x240 – Himax controller
• B&W 320x240 – Epson controller
ConnectCore 9P 9215 Additional Features and Benefits
• Flexible Interface Modules (2)
– DRPIC1655X CPU Cores
• 8-bit, x4 bus clock
• 192 Bytes data RAM
• 2 KB Program RAM
– Digi-provided Interfaces
• Dynamically loaded by NET+OS/Linux
– SD/SDIO
– Additional UARTS
– CAN Support (available on request)
– USB Low speed
– 1-wire
– Others (e.g.: I2C, Wiegand)
Flexible Interface Modules offer UNIQUE interface flexibility for a wide variety of
applications and connectivity
ConnectCore 9P 9215 Real-World Interface Capabilities
• Power Management Features – Low-power modes – Sleep mode – Low-speed operation – Configurable wake-up events
• RTC • ADC • IRQ • Others
– On-the-fly Clock Scaling
• Power Profiles/Typical Performance to follow • Default: 554 mA max @ 3.3V DC
ConnectCore 9P 9215
ConnectCore Wi9P9215
• Wired/Wireless Modules
– ConnectCore Wi-9P
• Pin-compatible
• U.FL antenna connector
• Digi-developed radio
• Supports 802.11a/b/g
ConnectCore 3G
• Complete cellular gateway on embedded module solution
– Easy and quick design integration without cellular certification effort
– Functionality of Digi ConnectPort gateways in module form factor
• IPv4/IPv6, VPN (IPsec with IKE/ISAKMP, multiple tunnels, DES/3DES/AES encryption, VPN pass-through, GRE forwarding), SSL/SSH, SMS, ZigBee (via off-module Digi Xbee)
– Python scripting support for customer-specific application logic
• Embedded extensions such as power management (sleep mode), GPIO control/access,. and configuration strapping options
– Built-in private labeling (web interface, product name, etc.) options for OEM customers
– Future support for Digi Embedded Linux platform
• Extended operating temperature and small form factor
– -30 to 70°C, 70 mm (L) x 50 mm (W) x 15.4 mm (H)
• Truly global 3G cellular communication engine (Gobi 3000)
– Including active GPS antenna support and dual-SIM capabilities
• 10/100 Ethernet and high-speed USB host interface
– Available through board-to-board connector
– USB host for flash memory and WatchPort camera integration
• General availability October 2011
– Verizon certification November 2011
ConnectCore 3G Overview
ConnectCore 3G
Pre-certified 3G embedded cellular router
enables secure, scalable solutions with global
network connectivity.
• Integrated 3G cellular/Ethernet connectivity
• PTCRB certified – AT&T, Sprint and Verizon
• ARM9 application processing
• High-speed USB host interface
• Rich set of peripherals and off-module
connector options
Utilities
Transportation
Digital Signage
Security/Surveillance
Industrial/Building Automation
Key Verticals/Applications
Key Features / Benefits
• ConnectCore™ 3G
Embedded 3G cellular router
(CC-9P-V527UJ-S)
Models ConnectCore™ 3G
Digi ConnectCore 3G
Digi ConnectCore 3G • Data Rate (Downlink/Uplink)
– HDSPA/HSUPA: 7.2 Mbps/5.76 Mbps, WCDMA: 384 kbps – GSM: 14.14kbps, GPRS: 85.6 kbps/42.8 kbps, EDGE: 236.8
kbps/118.4 kbps – EV-DO: 3.1 Mbps/1.8 Mbps, CDMA 1xRTT: 153 kbps
• Power Class – HSPA/WCDMA: Class 3, GSM/GPRS 850/900 MHz: Class 4 – GSM/GPRS 1800/1900 MHz: Class 1, EDGE: Class E2
• Dual Diversity (Receive) – HSPA/UMTS/EV-DO/CDMA modes
• Antenna Connectors – 1 x SMA (2 x U.FL optional)
• SIM Card Slots – 2 on module (off-module SIM slots optional)
• Network Interface – 10/100 Base-T, 10/100 Mbps (auto-sensing), full-/half-duplex
(auto-sensing)
Digi Confidential 49
ConnectCore 3G Module and JumpStart Kit
XBee Socket
Cellular Antenna Connectors (SMA)
USB Host
ConnectCore 3GJumpStart Kit Development Board Revision
ConnectCore 3G Needs Solution Benefits
• Access to temperature and environmental information in real-time
• ConnectCore 3G cellular gateway module
• XBee-enabled sensors • iDigi® Device Cloud™
• Secure, scalable solution ties remote device to applications
• Anywhere accessibility
Digi ConnectCore Wi-i.MX28
ConnectCard for Wi-i.MX28
Low-end networking
Industrial Automation (incl. CAN)
“Workhorse” Networking
High-Performance
HMI
Ultra Performance
HMI
ConnectCard for i.MX28
What is it? • High-performance, cost-effective System-
On-Module based on Freescale i.mX280/287 processor
• Scalable, small form factor
• Focused interface/peripheral availability
• 802.1a/b/g/n Wi-Fi with Bluetooth 4.0
• Ethernet – single or dual MAC/PHY, 10/100 Mbit/s
• Integrated power management for battery powered devices
Target Availability: January 2013
Lab Equipment
Patient Monitoring
Telehealth
Security
Energy Gateways
Key Verticals/Applications
ConnectCard for i.MX28 Module Block Diagram (Preliminary)
U.FL
802.11 a/b/g/n + BT 4.0
Up to 2 GB NAND
(SLC)
Up to 256 MB DDR2
PHY PHY
52-Position Edge Connector
LCD
/Tou
ch
Co
nn
ecto
r
Population Option
ConnectCard for i.MX28 Overview (Preliminary)
• High-performance, cost-efficient System-on-Module solution
- Freescale i.MX280/i.MX287 @ up to 454 MHz
- Pre-defined clock rate options below 454 MHz
- Up to 2 GB NAND Flash, up to 256 MB DDR2 @ 200 MHz
• Scalable, small form factor, low cost module platform
- 52-pin edge connector module design, 0.8 mm pitch, 30 x 51 mm
- Mating to inexpensive and widely available PCIe Mini Card connector
• Focused interface/peripheral availability
- Availability depending on i.MX28 variant populated
- UART, CAN, SPI, I2C, I2S, ADC, SD, USB, GPIO, PWM, JTAG/ETM
- 24-bit LCD/Touch through dedicated on-module connector (population option)
• 802.11a/b/g/n Wi-Fi with Bluetooth 4.0 (HCI) option
- Up to 150 Mbps data rate (MCS 7) at 5 GHz and optionally 2.4 GHz
- Dual-diversity option available for 2.4 GHz operation
- Wi-Fi Logo certification ready and CCXv4 certification ready
- Wi-Fi Direct and Wi-Fi AP mode (hotspot – up to 10 clients) support
• Ethernet – Single or dual MAC/PHY, 10/100 Mbit/s
ConnectCard for i.MX28 Overview (Preliminary)
UART Min 2, max 5 Inter-component communication within the customer’s design (MCUs, peripherals, etc.)
USB 2.0 OTG 1 USB connectivity for configuration, storage, data exchange, or inter-component communication within the customer’s design USB 2.0 Host Up to 1
SPI Up to 3 Inter-component communication within the customer’s design (MCUs, peripherals, etc.)
I2C Up to 2 Inter-component communication within the customer’s design (MCUs, peripherals, etc.)
I2S Up to 1 Low-cost, high-quality audio feedback (3-5 wire)
PWM Up to 4 Primary use for audio feedback (piezo buzzer, etc.)
SD/MMC/eMMC Up to1 Data storage/logging option
FlexCAN Min 1, max 2 Inter-component/inter-device connectivity bus
GPIO Up to 30 General purpose I/O, with interrupt/wake-up capability for power managed devices as well as tamper proofing
ADC • Up to 6-channels of LRADC, single HSADC (min 1)
1-Wire Up to 1 1-Wire device connectivity with parasitic power support (strong pull-up); population option
JTAG/ETM • On-module connector option (development only)
LCD / Touch (4/5-Wire) On-Module Connector
(Population Option) 5-Wire touch screen option for increased reliability, endurance (x20-30), no need for frequent recalibration
Integrated networking • 802.11abgn Wi-Fi with dual diversity, Bluetooth 4.0 connectivity option, Ethernet MAC/PHY (min 1, max 2)
Power 5VDC, Battery 5VDC, or 3.7~4.2V Li-Ion
Actual interface availability depending on module variant (i.MX280 vs. i.MX287) and application-specific muxing setup
ConnectCard for i.MX28 Overview (Preliminary)
Approvals
Radio US, Canada, EU,
Japan, Australia/NZ Pre-certified through modular approval process - eliminates regulatory approvals for customers
Emissions
FCC Part 15 Class B, EN 55022 Class B,
EN 61000-3-2, EN 61000-3-3,
ICES-003 Class B, VCCI Class II,
AS 3548, FCC Part 15 Subpart C
Section 15.247, IC (Industry Canada), RSS-
210 Issue 5 Section 6.2.2(o), EN 300 328,
EN 301 489-17
Related unintentional radiation, immunity, and safety test results provided as design support for customers
Immunity EN 55024, EN 301 489-3
Safety UL/UR, or equivalent
Environmental
Operating Temperature -40 to 75C Higher temperature ceiling possible through thermal management (lower speed, thermal pad, airflow, etc.)
Temperature Tests IEC 60068‐2‐1 IEC 60068‐2‐2
IEC 60068‐2‐78 Product reliability and quality
Vibration/Shock Tests IEC 60068‐2‐6
IEC 60068‐2‐64 IEC 60068‐2‐27
Design Tests HALT
Digi Confidential Information – NDA required
ConnectCard for i.MX28 Module and Development Board
(v2 Version)
Digi ConnectCore i.MX5x
ConnectCore Wi-i.MX51
ConnectCore Wi-i.MX53
Low-end networking
Industrial Automation (incl. CAN)
“Workhorse” Networking
High-Performance
HMI
Ultra Performance
HMI
Core modules provide fast application processsing and up to 1080p/720p video capabilities.
• Freescale i.MX5x microprocessor
• Integrated 802.11a/b/g/n on module
• Power management IC for low-power mobile
applications
• All peripherals on module connectors
Medical Devices
Kiosk Systems
Digital Signage
Security/Surveillance
Industrial/Building Automation
Transportation
Key Verticals/Applications
Key Features / Benefits
• ConnectCore™ i.MX53 / Wi-i.MX53
1 GHz Cortex-A8 module
• ConnectCore™ i.MX51 / Wi-i.MX51
800 MHz Cortex-A8 module
Models ConnectCore™ for i.MX
ConnectCore for iMX51 and iMX53
180-Pin Connector
180-Pin Connector
Security
SAHARA v4
Trust Zone
RTIC
SCC v2
SRTC
System Control
Secure JTAG
Power Mgmt
PLL x 3
Clock Reset
Timers
Watch Dog x2
Timer x3
PWM x2
Memory
ROM 32KB
RAM 96KB
Fast IrDA
1-Wire
I2C x2
GPIO
Keypad
Multimedia
OpenGL ES 2.0 + VG1.1
HW Video Codecs
HD720 TV-Out
Imaging Processing Unit
Image Signal Processor
Resizing & Blending
Inversion / Rotation
Image Enhancement
Dual-Camera Interface
Dual-Display Controller
External MemoryInterface
mDDR 200 MHzDDR2 200 MHz
600/800 Cortex-A8
Neon ETM
32KBI-Cache
32KBD-Cache
256KBL2-Cache
Vector FloatingPoint Unit
ARM Core
HS MMC/SDIO x4
SSI/I2S x3
UART x3
ATA-6
CSPI HS x2 / LS x1
SPDIF Tx
10/100 Ethernet
AXI / AHB Switch Fabric
USB OTG HS
USB HS x3
PHY
Smart DMA
Fuse BoxSeri
al E
EPR
OM
Up to8 GB Flash
Up to512 MBDDR2
2 x U.FL
10/100 (/1000)
Ethernet MAC
PHY
802.11a/b/g/n
MC1
3892
P
MIC
PHY
Acc
eler
om
eter
Population Option
ConnectCore for i.MX51 Module Block Diagram
• Feature-complete System on Module solution
– All Freescale i.MX51 peripherals/interfaces available
– Module design allows parallel use of dual camera, dual display and Ethernet
– Wired and wired/wireless LAN module variants available
• High-end core performance
– 600/800 MHz Freescale i.MX515 Cortex-A8 CPU
• 32K L1 I/D cache, 256k L2 cache, NEON, VFPU
– Cortex-A8 core performance 2.0 DMIPS per MHz
• Versus about 1.1 DMIPS per MHz for ARM9 cores
• Memory
– Up to 512 MB DDR2 (200 MHz) memory, up to 8 GB NAND flash
• Operating Temperature
– 0 to 70°C (800 MHz) and -40 to 85°C (600 MHz)
• Power management
– Advanced on-chip power management (CPU and accelerators)
– Integrated MC13892 Power Management IC
ConnectCore for i.MX51 Overview
• Integrated wired and wireless networking
– 802.11a/b/g /n WLAN
– 10/100 Ethernet (up to two)
• Second Ethernet port available in dual-display setup!
• Extensive security platform features
– Integrated SAHARAv4 encryption engine with support for AES/DES/3DES/RC4/C2, RSA/ECC, MD5/SHA-x
– RNG, Secure RTC, Secure RAM, Fuse Box, Tamper detection
• Integrated 3-Axis Accelerometer
– Freescale MA7455L
• On-chip multimedia support
– 2D/3D graphics hardware acceleration
– Multi-format video encoding/decoding hardware
– Image processing hardware, dual-camera interface
– I2S/AC97/SSI audio, optional SPDIF (Tx)
ConnectCore for i.MX51 Overview
• Complete connectivity options
– UART, IrDA, GPIO, SPI, I2C, SD/SDIO/MMC, P-ATA, USB 2.0 HS Host, USB 2.0 OTG+PHY, 1-Wire, ISO 7816, ADC, PWM, Keypad
• External memory bus
– 16-bit data/28-bit address in non-multiplexed address/data mode
– 16-bit or 32-bit data/28-bit address in multiplexed address/data mode
• Development debug options
– ETM/ETB, JTAG, Secure JTAG
• Common module footprint for wireless/wired variants
– 82 mm (L) x 50 mm (W) x 8 mm (H) / 6.5 mm (H)
– 180-position board-to-board connector
• FCI P/N 61082-181409LF (mating FCI P/N 61083-184409LF)
– Connector pitch 0.8 mm for simplified manufacturing on customer side
ConnectCore for i.MX51 Overview
Population Option
ConnectCore for i.MX53 Module Block Diagram
• High performance System-on-Module solution
- Freescale i.MX53 @ up to 1 GHz
- Up to 1 GB on-module DDR2 @ 400 MHz
• ConnectCore for i.MX51 form factor compatible
- Pinout similar, allowing common carrier board designs
- Digi will provide guidance in White Paper outlining design approach for common carrier boards – December 2011
• Improved video performance
- Up to 1080p video decode, up to 720p video encode
• On-chip LVDS and parallel LCD interfaces
• 802.11abgn Wi-Fi and Bluetooth 4.0 option
- Initial release with 802.11abgn (65 MBps)
- Up to 150 Mbps data rate (MCS 7) + BT via future release (TBD)
• Dual Ethernet MAC option
- On-chip Ethernet MAC provides IEEE1588 support
• IEEE1588 and dual-CAN bus controller
- Engage with local partners such as IXXAT to enable IA customers with respect to IEEE1588 and CAN
Digi Confidential Information – NDA required
ConnectCore for i.MX53 Overview
Freescale iMX51 vs. iMX53
Digi Overview
i.MX53 also provides dual-CAN (2.0b) on-chip Digi Confidential
Key Differences i.MX51 vs. i.MX53
78
ConnectCore for i.MX51 Final JumpStart Kit Development Board Design
Digi Confidential Information – NDA required
ConnectCore for i.MX53 Development Board
ARM Embedded Module Roadmap
Development Released Definition Planning
January 2010
ConnectCore® for i.MX51
Freescale i.MX515 600/800 MHz Speed Grades Up to 8 GB NAND, 512 MB DDR2 Integrated MC13892 PMIC On-module 802.11a/b/g /n (65 Mbps) option Dual-Ethernet option Industrial operating temp available JTAG and ETM support
ConnectCore® for i.MX53
Freescale i.MX53 800/1000 MHz Speed Grades Up to 8 GB NAND, 2 GB DDR2 Integrated Dialog DA9053 PMIC On-module 802.11a/b/g /n (65 Mbps), 802.11abgn (150 Mbps) with BT 4.0 (follow-up) Dual-Ethernet option Industrial operating temp available JTAG and ETM support
January 2012
ConnectCore® 3G • ConnectCore Wi-9P compatible form factor • Qualcomm Gobi 3000 module (3G/GPS) - CDMA, EVDO (Rev A), WCDMA, GSM, GPRS, EDGE, DTM, HSPDA 7.2, HSUPA 5.76 - CDMA 800/1900, UMTS/HSPA 850/1900/2100/900, GSM/GPRS/EDGE 850/900/1800/1900 MHz - GPS, AGPS, gpsOneXTRA • Pre-certified any network, anywhere solution • Support for additional GSM and GSM-R options • -30 to 70C max (w/Gobi 3000) • Digi PnP Firmware
October 2011
Digi Connect® Wi-ME 9210 802.11bgn • NS9210 @ 75 MHz • Up to 8 MB flash / 16 MB SDRAM • Digi Connect ME® 9210 form factor • 802.11bgn WLAN • Power management • -40 to 80C (higher possible with thermal management) • NET+OS® 7 (Sept) , DEL 5.7 (Jan)
September 2011
ARM Embedded Module Roadmap
Development Released Definition Planning
April 2013
ConnectCard™ for i.MX28
Freescale i.MX280/287 variants Initial i.MX28 module offering Focus on low cost and small form factor (~30 x 51 mm, edge connector, 0.8 mm pitch) On-module 802.11a/b/g/n, Bluetooth 4.0 option Dual-Ethernet option UART, CAN, SPI, I2C, I2S, SD, USB, PWM, ADC, 1-Wire, GPIO, LCD, JTAG/ETM (some via population options) -40 up to 85C, active/passive thermal management may be needed
ConnectCore 6
Freescale i.MX6x, Cortex-A9 dual/quad core LPDDR2/DDR3, NAND (SLC), Gigabit Ethernet Small form factor, cost-effective SMT module design (LGA) Development kits including 10” LCD panel w/P-CAP touch - Development board with PCI Express Mini Card Half-Size slot for 802.11n Wi-Fi (2x2) and 3G/4G Cellular Connectivity - Initial: DEL; Follow-up: Android, Windows Embedded Freescale launch participation 11/2012 (announcement only) Carrier PCB options for CC i.MX5x module compatibility, others
FQ413
ConnectCore V
Freescale Vybrid VF6xx (Cortex-A5 + Cortex-M4) Up to 256 MB LPDRR2/DDR3 (TBD), up to 2 GB flash On-module 802.11a/b/g/n and BT 4.0 option Integrated 3G/4G cellular option (SMT) On-module Dual-Ethernet connectivity w/L2 switch Operating temperature -40 to 85C Initial: DEL; Follow-up (TBD): Android Freescale launch participation Q1/CY2013 (announcement) Next-generation ConnectCore 4G
FQ413
FQ32013
iDigi Connector
Freescale Kinetis K60 Surface mount, small form factor, very low cost, low power Instant and secure iDigi integration for new/existing products - Custom application logic without native coding effort - Optional CodeWarrior/MQX custom development available
802.11abgn Wi-Fi, Ethernet, cellular connectivity options Device connectivity via UART, CAN, SPI, I2C, SPI, ADC, USB, GPIO Operating temperature range -40 to 85C Carrier PCB options for retro-fitting, including Xbee form factor (TBD)
ConnectCore V
What is it? • Highly flexible, high-performance core module
solution built on Freescale Vybrid 6xxx processor (heterogeneous dual-core)
• Combines application processor and microcontroller (Cortex-A5 processor and Cortex-M4 microcontroller enabled/disable independently)
• Ideal platform for power-efficient designs
• Complete set of integrated connectivity options and peripherals
• Common footprint for all connectivity options
• Replacement for ConnectCore 9C/9P platforms
Target Availability: FQ313
ConnectCore V Overview (Preliminary)
80-Pin Connector
4 x U.FL
Up to 2 GB Flash
Up to 512 MB DDR3
802.11 a/b/g/n
PHYs
Bluetooth
4.0
80-Pin Connector
2G/3G/ 4G
Cellular
ConnectCore V Overview (Preliminary)
• Uniquely flexible, high-performance core module solution
- Freescale Vybrid VF6xx processor (heterogeneous dual-core)
- Cortex-A5 (1.6 DMIPS/MHz) application processor at up to 500 MHz, with DP-FPU
- Cortex-M4 microcontroller at up to 167 MHz, with SP-FPU
- Up to 2 GB NAND Flash, up to 512 MB DDR3
• Combines application processor and microcontroller - Cortex-A5 application processor and Cortex-M4 microcontroller enabled/disabled independently
- Both cores share access to available peripherals and allow data exchange w/software applications
• Ideal platform for power-efficient designs - 40nm process, next-generation ARM Cortex application processor and microcontroller
- Wide range of power and wake-up modes targeting low-power applications
- Independent operation of cores allows unique low-power operation and power gating
• Complete set of integrated connectivity options and peripherals available - 802.11a/b/g/n Wi-Fi, Bluetooth 4.0, 2G/3G + Future 4G cellular, Dual 10/100 Ethernet
- I2C, SPI, QuadSPI, UART, CAN, USB host/OTG, SD/SDIO, GPIO, ADC, audio, LCD, crypto/security, JTAG
• Common module footprint for all connectivity options - Simple component population options on common footprint – true cross-product platform solution
• Out-of-box software support - Digi Embedded Linux (initial) and Digi Plug-and-Play Firmware (follow-up) for Cortex-A5
- Freescale MQX RTOS with CodeWarrior/IAR tools support for Cortex-M4
ConnectCore 6
What is it? • High-end multi-core System-on-module based on
Freescale i.MX 6 Dual/i.MX Quad multi-core processors
• Low-profile, small footprint module solution
• Multiple display support with full video acceleration
• Complete set of integrated connectivity options and peripherals available
• Platform for new and existing customers – new surface mount option offers cost-efficient differentiated offering
• Carrier PCBs allowing existing ConnectCore i.MX5x customers to migrate to i.MX6 platform
Target Availability: End 2013
ConnectCore 6 Overview (Preliminary)
Up to 8 GB Flash
Up to 4 GB
64-bit DDR3
802.11 a/b/g/n
Gigabit PHY
Accelerometer
Bluetooth 4.0
PF0100 PMIC
ConnectCore 6 Overview (Preliminary)
• High-end multicore System-on-Module solution
- Freescale i.MX 6Dual/i.MX 6Quad multicore processors
- Up to 4 Cortex-A9 (2.5 DMIPS/MHz) cores at up to 1 GHz each
- Up to 8 GB NAND Flash, up to 4 MB 64-bit wide DDR3
• Cost-efficient, low-profile, small-footprint module solution
- LGA module, max size 50x50 mm allowing machine placement
- Memory and PMIC provided on module, connectivity off-module (TBD)
- Reliable connector-less mounting ideal for ruggedized applications
• Multiple display support with full video acceleration
- Up to four displays, 720p/1080p resolution, multiple video and 2D/3D graphics accelerators
- On-module HDMI 1.4, LVDS, 24-bit RGB, MIPI DSI/CSI (display/camera) video interfaces
• Complete set of integrated connectivity options and peripherals available
- I2C, SPI, SATA, UART, CAN, USB host/OTG, SDXC/SD/SDIO, GPIO, touch, audio, crypto/security, JTAG
- 802.11a/b/g/n Wi-Fi, Bluetooth 4.0, Gigabit Ethernet on carrier PCBs
• Platform solution for new and existing customers
- New surface mount option offers cost-efficient and differentiated offering
- Carrier PCBs allowing existing ConnectCore i.MX5x customer to migrate to i.MX6 platform
- Future SOM standard form factor options viable (Qseven, others)
• Out-of-box software support
- Digi Embedded Linux (initial), Android 4.0 (ICS), Timesys LinuxLink, Windows Embedded (TBD)
iDigi Connector Overview (Preliminary)
CAN I2C UART SPI
USB
GPIO
AD
C
802.11 a/b/g/n
Cellular 3G/4G
ARM Cortex-M4
Flash SRAM
Eth
ern
et
DA
C
256-Bit AES Hardware
Encryption
Tamper Detect
iDigi Connector Overview (Preliminary)
• Instant iDigi integration for any device
- Small form factor, low profile, low power, low cost
- Built-in iDigi connectivity for management, programming, device data
- Custom application logic without native coding requirement
• Secure wired and wireless IPv4/IPv6 network connectivity
- SSL/TLS, WPA2 Personal and WPA2 Enterprise security
- FIPS 197 certified AES encryption capabilities
• Common SMT footprint with integrated wireless and wired connectivity
- 10/100 Mbit/s Ethernet, 802.11a/b/g/n Wi-Fi, 3G/4G Cellular
• Interface options for universal device integration flexibility
- UART, SPI, I2C, CAN, USB, GPIO, ADC/DAC
• Simplified retro-fitting of existing products
- Off-the-shelf carrier module with through-hole connectors (form factor TBD)
• Custom development option
- MQX development option for fully custom firmware
• Industrial operating temperature
- -40 to 85°C
802.11b/g
Digi Connect Wi-Wave
• Embedded radio card in compact form factor • 30 mm x 50.95 mm x 5 mm • 52-pin edge connector
• 802.11b/g connectivity • 2.4 GHz • Data rates up to 54 Mbps
• Long-term availability for embedded designs • Built using Digi’s own baseband processor technology
• Industrial operating temperature range • -40 to 85C
•Easy design integration through internal USB connectivity • USB 2.0 full-speed and high-speed support
• Broad embedded platform support for complete software integration flexibility
• Microsoft Windows CE 5.0/6.0 (ARM, MIPS, x86) • Linux, Microsoft Windows XP (Embedded)
Digi Connect Wi-Wave Overview
• Strong WPA2 wireless LAN security support • Seamless enterprise network integration • AES hardware encryption engine off-loads host CPU
• Dual-diversity option improves receive performance • Two on-board U.FL antenna connectors
• Receive Sensitivity • -68 dBm @ 54 Mbps
• Transmit Power • -12dBm @ 54Mbps
• Typical power consumption • Receive only: 250 mA @ 3.3V • Continuous transmit: 430 mA @ 3.3V
•Pre-certified in North America, Europe, and Japan • Significantly reduced time-to-market and design risk/cost • Antenna options 2 dBi (2.4 GHz), 3.6 dBi and 5.5 dBi (2.4/5 GHz)
Digi Connect Wi-Wave Overview
Part Number Availability
Digi Connect Wi-Wave 802.11b/g Evaluation/Development Kit
DC-WWV-EKIT Now
(802.11b/g)
Digi Connect Wi-Wave 802.11b/g Single Unit
DC-WWV-2A Now
(802.11b/g)
Digi Connect Wi-Wave 802.11b/g 25-Unit Bulk
DC-WWV-2A-B Now
(802.11b/g)
•Certification Status • 802.11b/g certifications US, Canada, EU complete
• Migration • Migration from previous to next-generation Digi Connect Wi-Wave through new common Windows CE driver supporting both variants
• Additional software platform support • Linux (Kernel 2.6.32 and lower) • Windows XP Embedded
• Part Numbers
Digi Connect Wi-Wave Status and Availability
Embedded Wi-Fi Radio Modules Roadmap
June 2010
July 2010
December 2010
Digi Connect Wi-Wave 802.11bg • Software platform support - Microsoft Windows XP (Embedded)
• 2nd Generation module only
Digi Connect Wi-Wave 802.11bg • Windows CE 5.0 / 6.0 • Common driver for 1st and 2nd Generation module
Digi Connect Wi-Wave 802.11bg • Linux kernel 2.6.29-32 • Platform support for 2nd generation module only
Development Released Definition Planning
Digi JumpStart Kits and Software for
Digi Embedded Products
Powerful, easy to use and a great value! Ethernet and 802.11b/g support All hardware and tools included
– Module and Development baseboard – NET+OS 7 with Digi ESP
Integrated Microcross GNU Tools Digi JTAG Link USB Debugger
– Power supply and all cables needed – Full documentation and baseboard schematics
Linux and Windows Embedded CE 6 Available – Currently without Digi JTAG Link USB Debugger
Digi JumpStart™ Kits
ConnectCore (Wi-)9P9215 Development board
• Networking Connectors – Ethernet RJ-45 w/magnetics – 2 x RP-SMA via U.FLs for Wi-modules
• 1 x MEI Serial Port, 1 x RS232 Console Port • LCD connector • I2C, SPI, ADC, UART C/D Header • Digital I/O - (I2C GPIO expander)
– 10 GPIOs on screw terminal
• RTC w/battery backup – Battery on development board
• Small Prototyping Area • Peripheral Application Header
– Standard pin out across all JSKs
• Signals Rails – Including PIC signals
• JTAG Connector • 9-30VDC Power Supply including PoE option
Typical JumpStart Kit Content
• Digi JTAG Link USB Debugger
– Segger J-Link Digi brand labeled
– Download Speeds 200 KBytes/Second
– USB 2.0 Support
– Powered through USB
– Optional Flash programming software
– Available as accessory for ~$300.
– Currently supplied with all NET+OS kits, planned for future Linux kits
Jump Start Kit Components
• Application Kit documention
Application Kits
Application Kit Roadmap ARM
Development Released Definition Planning
June 2011
Camera Application Kit • Micron MT9V111 sensor (VGA) • 2.1 mm lens (Mini-S), f/2.0, 170˚h • Hardware platform support - ConnectCore for i.MX51 • Software platform support - Windows Embedded CE, Linux
CY2012
Ubuntu Technology Pack • Ubuntu build for ConnectCore for i.MX53 - Based on Freescale LTIB • Window manager, desktop, Firefox browser, etc. • Wi-Fi, Ethernet, VPU/GPU, LCD panel and HDMI monitor (1080p) • Free binary and source code distribution (online only) • Native build environment (TBD) • Additional services through Spectrum Design or partners
March 2012
iDigi Telehealth Application Kit • Freescale i.MX28 based reference design • Wi-Fi, Ethernet, ZigBee, Sub-GHz, Bluetooth, NFC • Windows Embedded Compact 7 and Android UI • iDigi Device Cloud integration • Design services provided through Spectrum Design http://www.digi.com/hhh
December 2012
7” TFT LCD Application Kit Update • Support for direct LVDS display connections • Added native support for Touch Revolution Fusion 4/7/10 LCD panels with bonded projective capacitive (PCAP) touch screen (multi-touch gesture support depending on available Digi software platform support on target systems) – reference display only http://www.touchrev.com/products/fusion
Digi Confidential Information – NDA required
Q & A